Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Tow Bar Base Plate

• What is Needed to Attach a Tow Bar to a 1994 Geo Tracker
  It sound like you need a base plate kit for your 1994 Geo Tracker in order to attach a tow bar for flat towing. If that is the case then the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 will not work in this manner as it is designed to adapt a RoadMaster base plate to a Blue Ox or Demco tow bar. If you have such then the hardware that you need is included. Instead you are going to want to use the Blue Ox Base Plate Kit part # BX3503 if you have a Blue Ox tow...
  view full answer...
• Base Plate Kit Recommendation for Towing a 1995 Geo Tracker
  You will need the Roadmaster Standard Base Plate Kit, item # 118-1, or the Roadmaster XL Base Plate Kit, item # 118-3, for your 1995 Geo Tracker. If you will not be towing the vehicle often I would recommend the standard base plate kit but if you are planning on towing more often then I would recommend the XL base plates with one of the nicer tow bars for convenience. Along with the base plate kit you will need a tow bar and wiring for the towed vehicles taillights. With the Standard...
  view full answer...
• Everything Needed to Flat Tow a 1996 Suzuki Sidekick 2-Door Behind an RV
  If the crossover tube on your 1996 Suzuki Sidekick 2-door is open you will need to use base plates # 118-3. But you mentioned that it is open with a bracket welded on each side. If that bracket is not blocking the openings on the crossover tube then # 118-3 is correct. I have included a link to the installation instructions for you. The 118-3 base plates have a part of the bracket that looks like a tube that needs to be inserted into that crossover tube. If the ends are blocked then you...
  view full answer...
• Instructions And Install Time For The Roadmaster XL Base Plate Kit, # 118-3, On A 1995 Geo Tracker
  To install the Roadmaster XL Base Plate Kit, # 118-3, on your 1995 Geo Tracker 4X4 2-Door it is estimated by the manufacturer to take a dealer an average of 3 hours. So if you have average mechanical knowledge I would probably allow at least a minimum of 6 hours. There is no cutting or welding required, but it does need holes drilled into the frame rail. I do have instructions I will email to you under a separate email that will show pictures and where to drill the holes.
  view full answer...
• Base Plates and Crossbar Needed for Roadmaster RM-020 Tracker Tow Bar on 1992 Geo Tracker
  For starters, you'll need a base plate kit like # 118-3 which is a fit for 2 door Geo Tracker models only. From the photo you provided, it appears you're missing the crossbar that the # RM-020 uses, unless you already have it an it just wasn't shown in the photo. A replacement crossbar is available as part # RM-025. The Tracker tow bar would typically be permanently installed on the vehicle, but it can be removed by removing the drawbars of the # 118-3.
  view full answer...
  
• Base Plates, Tow Bar, and Accessories Needed to Flat Tow a 1993 Geo Tracker 4x4
  Bascially, the Roadmaster Base Plates, # 118-1, will attach flat to the frame on the front of your 1993 Geo Tracker. We have not yet had the opportunity to install the base plates on a vehicle so we do not have pictures at this time. These base plates are what are called fixed brackets so they will always be visible on the vehicle. I recommend going with the XL style, # 118-3, which has removable arms, but otherwise install the same way. There are several other parts you will need to safely...
  view full answer...
• Adapter For Roadmaster Base Plates To Duncan Tow Bar
  We do not have a bracket or adapter that can mate those two together on your 1989 Suzuki Sidekick. However if you get the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 118-3 you can then use the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 to connect to your Duncan eas aligner 2000.
  view full answer...
• Roadmaster Base Plate Kit for 1989 Suzuki Sidekick for Use with Roadmaster Blackhawk
  For your 1989 Suzuki Sidekick we have the Roadmaster Crossbar Base Plate kit part # 118-3 which will work great with your Roadmaster Blackhawk tow bar part # RM-422.
  view full answer...
• Recommended Base Plates Compatible With Roadmaster Falcon Tow Bar for a 1995 Geo Tracker 4WD
  The Roadmaster Classic Base Plate Kit - Fixed Arms # 118-1 or the Roadmaster XL Base Plate Kit - Removable Arms # 118-3 are confirmed to fit your 1995 Geo Tracker. Either will work with your Quick Disconnect Plate on your Roadmaster Falcon Tow Bar. With either base plate, you will need to buy the complete base plate to utilize your quick disconnect plate and your Falcon 5250 tow bar. Let me know if you'd like help with the wiring, supplemental brake system, or other components for your...
  view full answer...
• What Tie Downs are Needed to Install Roadmaster Base plate Kit 1003-1 on a 1992 Suzuki Samurai
  The base plate kit for a 1992 Suzkuki Samurai, part # 1003-1, refers to the tie down loops. You need to verify that underneath the front end of the Samurai are loops typically used by tow trucks to pull a vehicle out of a ditch or secure it to the truck when towing. The base plate kit actually installs in part to these tie down loops.
  view full answer...
• Parts Needed to Flat Tow a 1992 Geo Tracker 2-Door 4x4 Behind an RV
  Yes, Roadmaster base plates # 118-3 will fit your 1992 Geo Tracker 2-door 4x4. For a compatible tow bar I recommend the Falcon 2 # RM-520. I have linked a video review of this tow bar for you. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use a simple kit such as # RM-2120. this kit bypasses the Tracker wiring so you won't have to splice into the tail light wiring. You may also need a high/low adapter to keep the...
  view full answer...
• Wiring And Flat-Towing Recommendations For 1993 Geo Tracker Behind Motorhome
  It sounds like you are planning on flat-towing your 1993 Geo Tracker behind your motor home. When flat-towing any vehicle there are 5 things that are needed. Base Plates for the towed vehicle, a tow bar, safety cables, wiring for lighting, and most states now require a supplemental brake system. If you have wired your 1993 Geo Tracker to tow a utility trailer, the Tracker should have a female connector the trailer will plug into. It does not receive a signal from the trailer or any other...
  view full answer...
• Parts Needed to Flat Tow a 1995 Geo Tracker Behind a Motor Home
  Think of base plates the same way you would any vehicle specific part. Specific models of base plates are designed to fit specific vehicles and cannot be moved to other vehicles. The Roadmaster base plates # 1146-1 will not fit a 1995 Geo Tracker. You would not be able to modify them without compromising their integrity. Doing so would make them unsafe to use and may not even be possible depending on just how different the two vehicles are underneath. Roadmaster has 2 base plate options...
  view full answer...
• Can I Flat-Tow My 1993 Chevrolet Geo Tracker
  I did some research and found that your 1993 Chevrolet Geo Tracker is able to be flat-towed or towed with all 4 wheels on the ground. You will want to check with your dealership as the 2WD and 4WD models vary as to additional parts needed to be flat-towed. The item you selected, RoadMaster Tracker Tow Bar, part # RM-020, would work as a tow bar for your Tracker. If you will be towing your vehicle often, I would recommend a non-binding tow bar like the Falcon All Terrain Tow Bar, part...
  view full answer...
• Parts Needed to Flat Tow a 1992 Geo Tracker Behind a Motor Home
  I will be happy to help you out with your flat towing needs. The first thing you are going to want to do is consult the owners manual for your 1992 Geo Tracker. There should be information in the towing section or look for recreational towing in the index for more information on the specific procedure for your Tracker. The tow bar does not have a speed rating but the vehicle might. There are 5 items that will be needed to flat tow a vehicle: base plates, tow bar, safety cables, lighting,...
  view full answer...
  
• Flat Towing Parts Needed for a 1990 Geo Tracker
  Your vehicle is too old for me to be able to pull up the owners manual online, but if you check the owners manual in your vehicle there should be a section about recreational towing that details whether or not your vehicle can be flat towed and all the steps needed to be taken. For fixed arms that will always be visible at the front of the vehicle but that also cost less, use # 118-1. For base plates with removable arms but cost more use # 118-3. Next you will need a compatible tow...
  view full answer...
• Base Plate Recommendations For 1995 Suzuki Sidekick Using Roadmaster Falcon 2 Tow Bar # RM-520
  There are a number of base plate options available for your 1995 Suzuki Sidekick and your Roadmaster Falcon 2 Tow Bar # RM-520. They are dependent upon whether your vehicle is a 2-door or 4-door. The first thing you will want to do is check your vehicle owners guide to ensure your vehicle is able to be flat towed and if so, what restrictions may exist. In some cases, modifications will need to be made for the vehicle to be safely flat towed and your owners manual should have this information. If...
  view full answer...

Do you have a question about this Tow Bar Base Plate?