To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed specifically for heavy-duty applications, direct-connect brackets install onto your vehicle's frame to provide attachment points for a motor-home-mounted tow bar. Front arms are easily removable when not in use.
Features:
Note: Direct-connect base plates will work only with the Roadmaster tow bars that slide into a trailer hitch, such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, and Falcon 2. These base plates will not work with tow bars that require a hitch ball.
Direct-connect brackets do not require a crossbar because of the heavy-duty nature of your vehicle's frame. Thus, installation is simplified, the hookup process is faster, and the total appearance is enhanced.
Note: The EZ Hook safety cables included with Roadmaster's Sterling tow bars will not work with direct-connect base plates. These cables connect to an anchor plate on the Quick Disconnect crossbar, which will not be present when you are using these base plates.
The drawbars, or front arms, on the direct-connect base plate kit are simple to mount and remove, easily securing with pins. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Average Customer Rating: 4.8 out of 5 stars (402 Customer Reviews)
Designed specifically for heavy-duty applications, direct-connect brackets install onto your vehicle's frame to provide attachment points for a motor-home-mounted tow bar. Front arms are easily removable when not in use.Excellent service -- ordered online afternoon of July 13; shipped same day and arrived two days later. etrailer video was helpful in outlining steps for installation - especially fascia removal prior to actual install. Installation took about 3 1/2 hours which includes fascia/grill removal and reinstall. Did need to secure additional fender clips to reinstall fascia - many broke during removal as almost 20 years old -- available aftermarket from Dorman. Order arrived correct with all parts/no damage. Fit was excellent. Will order from etrailer again
I originally purchased a Blue Ox baseplate to install since I already had a tow bar. Upon removing the front grill, I was surprised to find the used Element I had purchased already had the front bumper caps removed and 2 braces installed. Thanks to the photos on etrailer reviews and product info, I was able to determine that the vehicle had previously had a roadmaster baseplate installed! I purchased this unit and it fit perfectly onto the already installed braces. Seems very solid and high-quality so far.
Perfect fit for my 2008 Honda Element SC Automatic! There were questions of whether this model was flat towable or not? After researching the heck out of it, I took the chance and I use the Honda 2005 flat tow instructions from the owners manual of that year (there were no engine or tranny changes from 2005 to 2008 that I could see). Perfect! I've now towed my Element over 500 miles without issue. This baseplate and instructions are great. I already had the Roadmaster Falcon 2 tow bar. I use the invsibrake system for the toad brake and love that also.
Excellent product. Easy to install on my 2005 Honda Element. Didn't have to cut anything on the frame or the grill fascia. Went with the Roadmaster over the Blue Ox because it is a less conspicuous baseplate and it wasn't necessary to alter any of the frame/metal on the car. I have a Blue Ox tow bar so I also had to have an adapter kit to hook the two together. Etrailer.com was very helpful getting me the correct parts I needed. Their customer service is A+++.
I have attached 'before' and 'after' pictures (I think). I cut the electrical mount and a few tabs off of the baseplate to give it a cleaner look. I will hide the wires behind the grill and bring them out when in use. Also purchased a few plastic caps to cover tubes.
I was shocked at how easy and precise fitting this base plate installed on a 19 year old 2005 Honda Element AWD with +180K miles! I didn't have to trim anything. I did have to use a smaller but same thickness washer on the inside passage side frame rail as the supplied washer was hitting a factory stop plate which I didn't wish to mess with.
Easy installation. I watched the video a couple of times and read the PDF instructions before my order arrived. When my order arrived I verified that I had all of the parts and in an hour and a half the base plate was on and project completed. I didn't need to trim my grill at all and it looks great.
Perfect fit. Very easy installation.
Fits perfectly
The Roadmaster tow bar mounts were easy to install and fit great. They worked without fail up to Alaska and Canada over 10K miles.
Also the tail light wiring kit made for an easy install.
I installed both products myself, but in fairness I am a former ASE cert mechanic.
Erwin
4/20/2021
The Roadmaster tow bar mounts are holding up great and we are still towing on them.
I use this tow bar on a 2005 Element, it has been great so far towing many short trips and two longer trips over 4000 miles. Even hitting some really bad roads in Kentucky where I was surprised to see the car still attached!
The base plate was perfect for my 2003 CRV tow vehicle. William was very helpful and professional on the phone. I installed it myself in about 3 hours. On line videos are available to clarify instructions. The lighting kit was even easier. Ill be ordering the braking unit next. Thanks guys.
Very easy installation on 2003 Honda Element. No cutting required and fit was perfect. Delivery was exceptional. Will definitely be a return customer!
Robert
9/17/2019
Still performing like a champ! No problems whatsoever! Great product!
We mounted this base plate on our Honda CRV and went on a 5000 mile trip while towing our car. The base plate worked great and we had no issues. I really like the removable arm feature. It makes for a clean look when removed.
Best price I could find. Perfect fit on my 2006 Honda Element (towed). Will continue to use you guys in the future. As you see I just ordered the back up lights for my 2002 Allegro Bus from you. They just got here and are once again, a perfect fit. Thanks
It fit perfect. I was surprised that I didn't have to cut the grill. Everything lined up and made it so easy to install.
Ronald
1/6/2022
Works perfect I have towed my CRV over 15,000 miles
Great information. Quick delivery. Easy installation. Pulled Honda Element 4500 miles last summer and baseplate performed well.
Excelent service and follow through.
Fast service.
Received the product before I received the tracking number..... less than a week!
Really pleased with the hitch for my Honda Element ! Super easy to install. Dealing with etrailer was a pleasure. Stacey was informative and extremely helpful !!!
The product was well packaged, came on time, and installed perfectly. The installation instructions were clear and easy to follow.
Salesman was very helpful in assisting me in purchasing correct package for my flat tow. Fast delivery
All parts were in the box, relatively easy to install. Very well built product.
Product arrived in great shape and fit on car perfect
Michael S.
11/21/2020
This product is well made and works perfect
The base plate was a perfect fit for my 2005 Honda Element. Didn't need to trim front cover.
Perfect fit
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard F.
8/4/2023
Have towed a 2004 Honda CRV with this base plate installed for about 8,000 miles since installation. All nuts are still tight on bolts. Had to shave one of the finger grips on my 4-way electric cable as the mounting bracket on the base plate was 1 inch too close to the license plate mounting bracket. Other than that quick fix, product is performing as expected.