bing tracking image
  1. Tow Bar Wiring
  2. Dodge
  3. Ram Pickup
  4. 2013
  5. Roadmaster
FITS 2013 Dodge Ram Pickup
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

lowest price pledge
Retail:$162.00
Our Price: $137.98
You Save: $24.02
Tow Bar Wiring
Confirmed to Fit
2013 Dodge Ram Pickup

1500

2500

3500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
RM-15267 - Diode Kit Roadmaster Tow Bar Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Roadmaster tow bar wiring for your 2013 Dodge Ram Pickup are available from etrailer.com. Installation instructions and reviews for your Dodge tow bar wiring. Expert service, and cheapest tow bar wiring price guarantee. etrailer.com carries a complete line of Roadmaster products. Order your Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part number RM-15267 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (624)
  • Q & A (0)
  • Photos
  • Why etrailer?

2013 Dodge Ram Pickup - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

  • Diode Kit
  • Splices into Vehicle Wiring
  • Universal
  • Roadmaster
  • Tail Light Mount

Diode kit allows you to use your Dodge Ram Pickup's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.


Features:

  • Lets you wire your vehicle to accept your RV's tail, brake, and turn signal lights for flat towing
  • Wires towed car as combined system so that brake and turn signals travel along same wire
  • Prevents electrical feedback and the damage it can cause to your vehicle's electrical components
  • Diodes powder coated aluminum case is corrosion resistant and provides protection from the elements
  • Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
  • Flexo-Coil cord is resitant to water, oil, chemicals, and has silicone-injected plugs to prevent corrosion
  • Center pin on 6-Way plug wired to 12V power, there are two industry standards
  • Includes:
    • 4 Hy-Power diodes - 27' long
    • 4-Wire harness
    • Wire connectors
    • Cable ties
    • 1 Ring terminal
    • 3' Long plastic loom
    • 8' Coiled cord
    • Vehicle mounting bracket
    • Socket
  • Made in the USA
  • Limited Lifetime Warranty


Specs:

  • Diode Max amperage: 85 amps
  • Diode Max voltage: 24 volts
  • Coiled cord max length: 8'
  • Coiled cord retracted length: 15"


Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.


Separate vs. Combined Lighting Systems

Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.


Diode Wiring Diagram


Diode Wiring Diagram


Diode Wiring Diagram


Diode Wiring Diagram

Do You Need a Brake Light Relay?

Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.



15267 Road Master Towed Car 4 Diodes RV Plug to 6-Wire Socket Flexo Coil Wiring Kit

Item # RM-15267

Installation Details RM-15267 Installation instructions


Customer Reviews

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - RM-15267

Average Customer Rating:  4.8 out of 5 stars   (624 Customer Reviews)

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.

by:
2017 Jeep Wrangler Unlimited

First off, I am NOT a mechanic and I especially HATE auto electrical projects. However, I wanted to wire my Jeep to tow behind my motorhome so I ordered the Roadmaster Diode 7 wire to 6 wire wiring kit (RM 15267). While I think it took me longer to install than those with experience, I am happy to say I got it hooked up and working on my first try! The videos that came on my email confirmation were GREAT and really helped my experience. Thanks so much everyone at etrailer for helping make my project successful!




by:
Dodge Dakota

My experience with etrailer was good from the perspective of the cooperation and pleasantness. However, even though I was clear on the tow bar I had (Blue Ox) and the vehicle I was towing (2005 Dodge Dakota) when the tow package came and the shop I had installing it got to the end of the installation, it was discovered that the wrong pins were sent, i.e. they wouldn't lock in place - too short . At first we couldn't determine what the problem was, so I called etrailer back. Was told those were the correct pins. Finally called Blue Ox directly and the rep immediately told me (after I gave him the PN) that those were the wrong pins. Without me asking he offered and did send two replacement pins free of charge. They worked perfectly.




by:

Works as expected. I hook up and check lights and it works after numerous hook ups


Comments
Works good. Has one isse with water getting into crimp connectors. I recrimped connectors and added shrink tube and works great.
Brian - 07/17/2022


by:
Jeep

We have towed our Jeep almost 2,000 miles since installing the recommended parts from etrailer and it has worked perfectly on every connect and disconnect along the way. Tows beautifully, even at 70 mph.

Excellent customer service and helpful videos from these folks. Would recommend to anyone needing help with parts and guidance in towing their toad to give them a call.


Comments
Our system is still working perfectly a year later. Our Jeep is a 2018 Cherokee Trailhawk and while we’ve seen some RV forums talk about “death wobble”, we have never experienced this using these Roadmaster products towbar & baseplate. We tow the Jeep with our 39’ Class A gasser and hardly know its back there. Even on sharp corners the Jeep follows perfectly and no binding. Connecting or disconnecting takes maybe 5 – 7 minutes. Then check all of our lights, make sure the Jeep is in neutral wbrakes off and we’re on our way. The braking system that we installed purchased from etrailer is the “Stay-n-Play Duo”. I would recommend that to anyone looking for easy operation. The installation time was a bit lengthy and involved but once completed makes all of your towing trips much easier. Just the flip of a switch and the braking system is ready for towing. No portable unit to lug around and adjust each time you tow your vehicle. The etrailer folks made the perfect recommendations for our needs and everything has worked GREAT!
Brent T - 04/05/2020



by:
2016 Entegra Coach Aspire Motorhome

The wiring kit was mostly OK. They claimed the wiring supplied was 27' long, however, what I received wasn't even 20' long. I had to made a splice on all wiring leads near the front of the bumper. The diodes and rest of the kit worked as described. Upon testing, there were no issues when hooked up to my rig. I also added the brake light relay and wired it through the supplied harness as well.


Comments
I reached out to Roadmaster and they confirmed the wiring with the kit is 27 feet long.
-- Etrailer Expert Thomas M - 01/27/2022


by:

Simple I installed myself just a little tight on factory wiring harness




by:
Honda

These were exactly what I needed. I changed tow vehicles to a Honda HRV (manual) and the only base plate available was the Roadmaster. These adapters took about 10 minutes to change my Blue Ox tow bar to accept the Roadmaster.




by:

Easy and fun to install.




by:
2018 Jeep Grand Cherokee

The product is working very well but we were disappointed that it didn't include a break away cable and safety chains. We had to purchase separately.




by:

When I was ready to place my order, the representative was very helpful, did not rush me, answered all my questions, and dug for more info to ensure that my order included everything. The order was delivered very quickly too. We have had to order one electrical connector that I forgot.




by:

The Roadmaster lighting wiring kit contains everything needed to wire your toad for towing. etrailer has model specific detailed step by step installation video that make the job a breeze. Painless!




by:

The wiring kit was perfect and everything you need is there. I would have rated it a five, except that the multi-colored length of wire that comes with the kit was just barely--and I mean just barely--long enough for my application. If I had cut the ends even a quarter-of-an-inch shorter I would not have had enough wire to complete the job without splicing additional wire in. My only complaint is that the length of wire that comes in the kit is for small or short cars only. This is the second wiring kit that I bought. The first one was a coupe of years ago and was for a Ford F-150 pickup. In that application the wire was not long enough to run from the front of the pickup to the rear and I had to splice extra wire in to make it work. As long as you know that up front, then the rest of the wiring kit works great and the directions are very good.


Comments
No problems after one year. The contact points are not corroded and everything works great.
Alton & - 01/11/2022


by:

It was a great looking piece of hardware, is sturdy built and of a goog grade steel fits perfectly and has all the right hardware.this is my second purchase from etrailer and I haven’t been disappointed in the products or service I have received.




by:
2016 Jeep Wrangler

Towbar wiring system arrived within 4 days of placing my order. This 7 to 6 wire system is an upgrade to the simpler 4 wire plugs I've used in the past and will allow me to add on a battery charge line or brake system later on. The demonstration video was indispensable in hooking up the wiring and diodes. Though running and connecting the wiring does take longer than a 10 minute video. Now I can tow my 2016 Jeep Wrangler behind my RV.




by:

The wiring kit was installed on a 2020 Jeep JL Sport S. I really appreciate the ordering process and quick shipping of etrailer. The Roadmaster 7-6 wire cable is heavy duty and the coiled design keeps it from dragging on the ground. On the etrailer website there is there is a Q&A segment that has a flowchart to see if you need a brake light relay kit. It states that if you get a brake light with the ignition off you need the kit. I finally learned that the Jeep JL goes to sleep about 5 minutes after the ignition is turned off- so you do not have to use a brake light kit on the Jeep JL.


Comments
We pulled the Jeep several times this year. Installing and removing the cabling was quick and easy. The wiring kit worked well with the brake lights and turn signals working like they should. Installation was made easier after watching the videos
Bryce - 10/23/2021


by:

System has been working fine, routing the wires was easy enough. Getting the crimp on spade terminals to hold onto the tiny OEM wires was a challenge. Would be nice if they included some 24/26 gage terminals for the OEM side.




by:

product was as stated on web site and it also included the installation instructions. I will double check the tow vehicle wiring plug to verify if it is a separate or combination system per the instructions. I give it a 4 star rating because if the brake system is separate I have to purchase another device which will delay my install.




by:
2012 Ford Edge

I ordered this kit to get me a heavy duty coiled cable with room to use one input as a dedicated power supply from the bus to then be sent to the towed battery to keep it charged going down the road.
the diodes i chose not to use, as i have a hopkins plug and play kit on the way, that will marry up the 6 pin fitting
I just needed the cable with the 7 to 6 adapters, it was the best price for the need :)


Comments
zero issues so far.
robert S - 02/22/2020



by:
2017 Jeep Cherokee

Use this kit on our 2017 Jeep Cherokee Trailhawk and works great!
Haven’t had any issues when plugging in from our MH.




by:

What can you say about a wiring kit everything was there it hooked up easy was a plug and play with sort of situation so it worked out fine I can't complain about it at all




by:

Tammie was the best sales person I have ever talked to. She went out of her way to get me my parts as soon as possible even though there was a 8week wait. With here help we can now get on the road as planned and have all the safest equipment to tow our Colorado. Another big thanks to Tammie and etrailer for the great surface.




by:

There was not enough wire to
run the
jumper and the plastic six pin female connector broke off when used for the first time. Be sure to double check your vehicle wiring as it does not always match up to the diagram provided.




by:

My project on 2021 Ford Ranger includes the tow bar, base plates, wiring harness, supplemental brake system with break- away switch and rv brake warning and brake relay. Every component is the highest quality, fit perfectly and works exactly as it should. The written instructions were very good for this complex assembly but the saving grace was all the excellent instructional videos detailing the work. One of the box’s damaged in shipping was missing parts that were quickly replaced in just a few days. Great products and great support.




by:

Easy install, instructions were clear. I had the wiring completed at a rv shop, if I had my lift available I would have done the work myself.




by:

Installing this kit, after watching the [online] video etrailer/Roadmaster tow bar wiring kit installation was so well explained that anyone should be able to do it....



25
624
Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Wiring



  • Is Lighting Kit Needed if Using Supplemental Braking When Flat Towing a 1999 Jeep Grand Cherokee
    Yes, you will still need to use a lighting system as well as a supplemental braking system when flat towing a vehicle. I have included a link to the different lighting kits that you can use for your 1999 Jeep Grand Cherokee if you do not already have one. I have also included a link to an FAQ article that will help you determine which lighting kit would be best for you. Be sure to consult the vehicle owners manual on the proper procedure for towing your Jeep. I also included a helpful...
    view full answer...
  • Diode Wiring Kit Recommendation for a 2007 Chevy HHR
    For your 2007 Chevy HHR you would need a diode kit that has a total of 4 diodes. I recommend you get Roadmaster kit # RM-15267. I attached installation instructions for installing a diode kit onto a vehicle with a combined tail light assembly like what you have on your 2007 Chevy HHR below, as well as a video from when we installed the Roadmaster kit. There's also a tow bar wiring FAQ article below for you to check out.
    view full answer...
  • Tow Bar Wiring Recommendation for a 2016 Ford F-150
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • Best Flat-Tow Wiring Harness for a 2015 Mini Cooper S
    The most popular diode kit we have for a 2015 Mini Cooper S is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267. This kit comes with four diodes, wiring connectors, 6-way trailer connector for the vehicle, and a coiled 6 to 7-way adapter to connect the toad to the motorhome. We use this kit very often as it performs really well and lasts equally as long. I have attached a review video for you as well.
    view full answer...
  • Easier Way to Wire Vehicle that is Being Flat Towed that has Separate Turn Signals from Stoplights
    When flat towing a vehicle with separate turn signals from brake lights the easiest solution is to wire the towed vehicle like a combined circuit vehicle. For that we have the tow bar lighting kit part # RM-15267 which wires to the towed vehicle and basically operates the brake lights of the towed vehicle like both the blinkers and brake lights. I attached a diagram that shows how all of the connections get made.
    view full answer...
    Image 1 for
  • What is the Best Flat-Tow Wiring Harness for a 2019 Jeep Wrangler
    I have exactly what you need to operate the lights on your 2019 Jeep Wrangler using the signals from your 2005 Fleetwood Bounder Motorhome. For this, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which comes with everything you need including diodes, wire loom, and trailer connectors for both the vehicle/motorhome. According to my research, your 2005 Fleetwood Bounder should have came with a factory 7-way so this part of the install process will...
    view full answer...
    Image 1 for
  • Tow Bar Wiring for 2017 Jeep Wrangler Unlimited
    There is not a Hopkins tow bar wiring kit available for your 2017 Jeep Wrangler Unlimited. Instead, I highly recommend checking out the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 which is a confirmed fit for your Jeep and is designed to effectively prevent electrical feedback to keep your Jeep's electrical system safe. I have added a link to a video of this kit being installed on a '17 Wrangler Unlimited for you to take a look at as well.
    view full answer...
  • Can the Input on the RoadMaster Diodes be Reversed
    The input sides on the diodes of the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 can be switched so that the left side is for the towed vehicle and the right side is for the motorhome or vice versa, it doesn't matter. If you can tell me more about the issue you are having with the kit I may be able to offer additional advice for you. Please note that any time there is a wiring issue the first thing you should check is your grounds and by this I really mean remove...
    view full answer...
    Image 1 for Image 2 for
  • Install Video to Use for Installing Tow Bar Diode Kit on 2015 Honda Fit
    We had the chance to install a similar Roadmaster diode kit to the part # RM-15267 that you mentioned in a 2016 Honda Fit and we shot an install video to cover the process from start to finish. I attached a link to the video to this page.
    view full answer...
  • Does Roadmaster Diode Tow Bar Lighting Kits Activate Third Brake Light
    You did every thing correctly. The diode kit part # RM-15267 only ties into the taillight signals on either side of the vehicle and does not activate the third brake light.
    view full answer...
  • Diode Kit Tow Bar Wiring Kit Recommendation for a 2015 Fiat 500
    What you described is what I typically recommend for people wiring up their separate circuit vehicle taillights with a diode kit. Having the taillights operate like a combined circuit is much easier to install and requires fewer diodes. It really is the way to go. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of...
    view full answer...
  • Flat Towing Lighting Recommendation for a 2015 Chevy Sonic to Connect to RV 7-Way
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV 7-way connector.
    view full answer...
  • Tow Bar Lighting Recommendation for a 2005 Jeep Wrangler Unlimited
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the truck's 7-way. I attached an install video that shows this kit being installed on a similar 2007 Wrangler...
    view full answer...
  • Wiring for Flat Towing a 2016 Lincoln MKX
    Yes, the diode kit # RM-15267 is confirmed to fit your 2016 Lincoln MKX. Depending on how handy you are I'd say the installation is between 4-6 hours. I did attach an installation video on a 2015 Jeep Cherokee which won't be exactly the same as your Lincoln but it will be the same basic process.
    view full answer...
  • Tow Bar Wiring Recommendation for 2007 Dodge Dakota
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. I attached an install video on a similar Dodge truck as yours for you to check out as well.
    view full answer...
  • tow Bar Wiring and Avoiding Back Feeding to Trailer Connector on a 2017 Toyota Tacoma
    On regular trailer wiring like the factory 7-Way on your 2017 Toyota Tacoma you cannot send power through it backwards to power the vehicle lights when flat towing the Tacoma. It is designed for one direction only and likely is not even tied into the vehicle tail lights like many aftermarket set ups are. So if you just wired up # RM-15267 as planned it will be good to go because it does tie into the vehicle tail lights and won't interfere with the factory trailer wiring on the truck.
    view full answer...
  • Tow Dolly Vehicle Wiring Recommendation for 2017 Ford Transit Connect Towed on Tow Dolly
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • How is the Diode with the Yellow Connector from the Kit RM-15267 Installed on a 1997 Jeep Wrangler
    The diode that comes with the yellow connector in the Flexo-Coil Wiring Kit # RM-15267 needs to be connected to the brown wire from the wiring harness. I have attached a photo from the directions for you to reference as well as an installation video on a 2014 Jeep Wrangler for you to check out.
    view full answer...
    Image 1 for
  • Special Wiring Harness Needed to Flat Tow a 2017 Jeep Cherokee Behind an RV
    It is true. On some Jeep vehicles such as the 2017 Jeep Cherokee there is a special wiring harness needed for flat towing. The harness does something with the steering wheel lock and allows the Jeep to track without any sway or "death wobble" that can be potentially dangerous. Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership. Adding a charge line to the battery is actually pretty easy....
    view full answer...
  • Tow Bar Lighting Recommendation for 2018 Jeep Wrangler JL Sahara
    For tow bar lighting for your 2018 Jeep Wrangler JL you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • Compatibility of Roadmaster Diode Wiring Kit # RM-15267 with 2018 Jeep JL Wrangler LED Tail Lights
    The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is compatible with the LED lights on your 2018 Jeep JL Wrangler Unlimited Sahara package. The LEDs will not change the wiring function of the diodes and will work just fine.
    view full answer...
  • Where Can Tow Bar Wire be Grounded With Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
    It is always preferable to attach the ground directly to the chassis frame, and where you can safely ground the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 depends on if the owner's manual of your 2018 Toyota Corolla iM specifies a location that you need to attach the ground wire. I cut out a portion of the installation instructions of this kit for you to check out and as you can see it is possible you may need to attach the ground wire at a specific spot to avoid...
    view full answer...
    Image 1 for
  • Tow Bar Lighting Recommendation for 2008 Ford Edge
    For tow bar lighting for your 2008 Ford Edge you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • Tow Bar Lighting Recommendation for 2018 Chevy Equinox
    For flat tow lighting on your 2018 Chevy Equinox you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. If you are local to us (near St. Louis, MO), we could do the install,...
    view full answer...


< Previous
123. . .104



Do you have a question about this Tow Bar Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tow bar wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tow bar wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Bradley B
Test Fit:
Bradley B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Aidan B
Video by:
Aidan B
Employee Thomas T
Video by:
Thomas T
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Rachael H
Written by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.