bing tracking image
  1. Tow Bar Wiring
  2. Dodge
  3. Ram Pickup
  4. 2013
  5. Roadmaster
FITS 2013 Dodge Ram Pickup
Roadmaster Tail Light Wiring Kit with Bulbs

Roadmaster Tail Light Wiring Kit with Bulbs

Item # RM-155
lowest price pledge
Retail:$89.93
Our Price: $64.19
You Save: 29%
Tow Bar Wiring
Confirmed to Fit
2013 Dodge Ram Pickup

1500

2500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
Roadmaster Tow Bar Wiring - RM-155
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Roadmaster tow bar wiring for your 2013 Dodge Ram Pickup are available from etrailer.com. Installation instructions and reviews for your Dodge tow bar wiring. Expert service, and cheapest tow bar wiring price guarantee. etrailer.com carries a complete line of Roadmaster products. Order your Roadmaster Tail Light Wiring Kit with Bulbs part number RM-155 online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (212)
  • Q & A (0)
  • Videos (30)
  • Photos
  • Why etrailer?

2013 Dodge Ram Pickup - Roadmaster Tail Light Wiring Kit with Bulbs

  • Bulb and Socket Kit
  • Bypasses Vehicle Wiring
  • Universal
  • Tail Light Mount
  • Roadmaster

Use your towed car's signal lights without tapping into its wiring. This self-contained wiring kit bypasses your Dodge Ram Pickup's electrical system, eliminating any concerns over violating the manufacturer's warranty.


Features:

  • Lets you use your towed vehicle's brake, running and signal lights without tapping into its wiring
  • Bypasses towed car's electrical system completely - wiring is routed beneath the car
  • Works via independent plugs and sockets mounted inside the tail lights
  • Maintains manufacturer's warranty on towed car by avoiding any involvement with its electrical system
  • Overall measurement of bulb: 2-1/4"
    • Length of bulb from flange to top of bulb: 2"
  • Includes all necessary wiring, 2 lights, 2 sockets, zip-ties and instructions
  • Made in the USA
  • Limited Lifetime Warranty


Note: Towed car must have enough room inside the tail light lens housing for an extra bulb and socket.



155 RoadMaster Tail Light Wiring Kit with Bulbs

Installation Details RM-155 Installation instructions

Video of Roadmaster Tail Light Wiring Kit with Bulbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Roadmaster Tail Light Wiring Kit Installation - 2009 Mini Cooper

Today, on this 2009 Mini Cooper, we're going to install part number RM-155 from Roadmaster. The first thing we're going to do is start from the front of our car and work our way back. To help run our wire through our grill, we're going to use a piece of airline tubing. This could also be a piece of fish wire or another piece of wire, to help it through. We'll run it through the grill, and then underneath, where we can reach it. Next, we'll load our wire harness. It has two 4-pull ends on it. Doesn't matter which end, but we need to remove one.

So, we'll go ahead and cut it off and tape it to our pull wire, and pull it on through. Once we have it pulled all the way through, we'll leave some hanging out the front, and we'll put a loom around it. After we have our loom on our wire, we're going to end up pulling that behind the grill and out one of the slots. To help pull our wire through, behind the grill, we're going to take the shorter 4-pull lead that comes with the kit. This is actually the lead that goes between the RV and the towed vehicle. We're going to push that through the slot and then to the inside.

We push those two together and use it to pull the 4-pull harness back through the grill. Once we have it pulled through the grill, we'll go ahead and use some zip ties to attach it. We'll also use the zip tie around the outside of the 4-pull to help keep it from being pushed back in through the grill. We'll also leave a little bit of length out so we can pull it away from the grill as needed. Along the length of it, we'll go ahead and zip tie our wire. After that's done, we'll continue running our wire underneath the car, back towards the tail lights. As I run it underneath the car, we're going to run it underneath the subframe and out towards the back.

We'll also follow the brake line along the side of the gas tank, and over the rear suspension components, all the way back to our tail light on the driver's side. At this point, we'll go ahead and leave the wires alone, and we'll go ahead and remove the tail lights. To remove the tail lights, first off, we have to remove the chrome bezel around the tail light. Using a small, right-angle pick, we're going to work our way between the chrome and the tail light lens. This will unsnap, but it also helps to pull back the bezel a little bit. You can see the little red tabs that you can push down with a small screwdriver to help break it free.

It seems to work best to work at the top and work your way down. Once the bezel is removed, you'll see there's three screws that we have to remove next. We're removing three torque screws. On the inside, this is really hard to find, but there's a tab on top and bottom. It's best to push down, if you can, on the tab on top, as you push out the lens, and angle the bottom of the lens up so the bottom tab clears the sheet metal. This will take a little practice to get to the tabs. You have to get it at just the right angle, and it will come apart. Once we have our light free, we'll go ahead and disconnect the wire harness from the tail light. There's a small tab we have to push, and we can release it. We're done with our driver's side. Let's go ahead and repeat the same process over on the passenger side. Our tail light's out of the way. Look inside on the driver's side socket, and look down, you'll see a rubber grommet. We'll go ahead and poke that grommet out and let it fall to the ground. Then, we'll go ahead and retrieve the grommet, and we'll cut the center out of it. Using a utility knife, we'll work our way around and then pull it apart. In this case, we're using a pair of pliers to help pull it apart. We'll set that aside for now, and we'll go back to our 4-pull wire. Using our airline tubing again, we'll go ahead and run it down through the hole, and use it to pull up our wire. We'll pull it up and through, and then run our grommet through it. We'll make sure we take up all the slack, and then, we'll take our 4-pull wire and go right back through the grommet again, so we'll be making a loop with it, and we'll run it back down through the same hole. Once again, we'll make sure we take up all our slack, but leave enough wire inside that we can use to make our connections later. In this case, we're using maybe a little over a foot left over. Once we're satisfied with the length, we'll go ahead and reinstall our grommet with the wires inside of it. We'll leave that side alone for now, and we'll go ahead continuing running our wire over to the passenger side. Running to the passenger side, there's some factory wiring that we'll follow along the way. Make sure we stay above the heat shield, and away from the exhaust. Now, at the bottom of the socket on the passenger side, there's a large rubber grommet. We'll use a knife to cut it, and then use our airline tubing to pull our wire through, once again. We'll take up our slack and cut off our excess. Now, we've got our wires ran to both tail lights. Now, let's go ahead and start working on the tail lights themselves. We'll take one of the tail lights, in this case, the driver's side. We'll go ahead and mark for a hole. We'll use our one-inch hole saw to make our mark first. Then, we'll drill out a pilot hole first, with a quarter-inch bit, then follow it back up with the hole saw. Now, we'll take our light socket and bulb, and we'll do a quick test fit. When you put it in there, you can see the tabs are bent in, so it doesn't grip. What we're going to do is remove the tail light and pull out the tabs a little bit, working our way around. We'll take a small screwdriver to pry up the small tabs. We're only going to pull up the tabs just enough to where we start moving them, and then do a test fit on the tail light. If you look like it'll 00:07:28 start, we'll go ahead and reinstall the tail light bulb, and then install the socket for good. What you aim for is you want a nice, snug fit. We're done for the driver's side. Let's go ahead and repeat the same process over on the passenger side tail light. Now, we can go ahead and start hooking up our wires. Now, to prepare our wires on the driver's side, we're going to split our wires away from each other. We'll split all 4 wires, and we're going to tuck away the green wire, because that will not be used on the driver's side. Now, we have our yellow, our brown, and our white. Starting with our white wire for ground, we're going to take that wire and cut it in half. Using a butt connector, we'll connect those two ends together. We'll connect that to the ground wire on our new light socket. That's going to be the black wire. Next, we'll do the same thing with the brown wire. We'll cut it in half, use the butt connector to connect the two ends together, and the open end will go to the brown wire on our new socket. Now, on our yellow wire, we'll go ahead and cut it in half. I don't need to use both halves. We just need to use the one half that goes towards the front of the vehicle, to our 4-pull plug. We'll attach that yellow wire to our red wire on our new socket. All right, now, we'll go ahead and tape up all our wires, and then we'll go ahead and reinstall the tail light. Now, we'll go over to our passenger side and repeat the same process. However, we won't be using the yellow wire on that side, so we'll cut it away first and tuck it out of the way. We'll have our green, our brown, and white wires on the passenger side. Once again, we'll take our white wire, cut it in half, then reconnect the two ends with one end of the butt connector, and the other end will get the ring terminal. A ring terminal will run to some sheet metal on the inside of a car for ground. When we install our ground screw, it's a good idea to find an area where it has overlapping layers of sheet metal. We'll take our black wire from our new socket, and connect that to our white wire. Then, we'll do the same thing, brown to brown, and then our red wire on our socket will go to the green wire on the passenger side. Once our connections are made, we'll go ahead and tape up the wires. At any point in this process, it's a good idea to take a zip tie and tie up any wires and anchor them, to make sure they don't move anywhere. Then, we can go ahead and install the tail light. Okay. Now, apply power to the front and see how it works. First off, we'll go ahead and try our running light circuit. Then, we'll go ahead and try the right turn signal, and then show our left turn signal. Now, a turn signal is for the same circuit as a brake signal. Okay, looks like everything works. With that, that'll finish it for our install of part number RM-155 from Roadmaster, on our 2009 Mini Cooper. .


Customer Reviews

Roadmaster Tail Light Wiring Kit with Bulbs - RM-155

Average Customer Rating:  4.7 out of 5 stars   (212 Customer Reviews)

Use your towed car's signal lights without tapping into its wiring. This self-contained wiring kit bypasses your vehicle's electrical system, eliminating any concerns over violating the manufacturer's warranty.

by:

Put this into a 2002 Jeep Liberty. Good directions. Drilled out the lower part of tail light housing and install bulb sockets into it. You may have to deburr the tail light housing a bit and manipulate the tangs on the bulb socket but is fine. I put in 1157 LED bulbs :) Good stuff!




by:
1998 Jeep Wrangler

This product was easy to install but it took some time routing the wiring harness from the front bumper to the rear. Pick up some extra zip ties, you will need several. The lighting system is independent allowing for the use of LED bulbs. Great product.




by:

This was an easy installation for me and less hassle than the resistor method on the stock wiring harness. The only drawback is fishing the wire from front to back so it protected.




by:

The product is working very well. The video and the instructions were very helpful.


Comments
The wiring is holding up super great
John - 02/07/2022


by:
2013 Ford Fiesta

Found this item was wired with the brake lights for the brown wires and turn/running lights for colored wires and this fact kept me from getting this done very rapidly. Once identified, went together really nicely and actually grounded to frame for higher light output. I upgraded 3 wire into 2 wire converter with "Roadmaster Brite-lite 3 to 2 Wiring Converter" and they are as bright as the lights already in the housing. Except for that wiring issue, it would have been excellent. As to performance after install, great. Customer service was nice from Roadmaster as well. Did receive a call back message from etrailer a couple days later.


Comments
Continues to work as it should! Very pleased with end product after installation by myself and continue to be happy every time I hook up since! Nice item! And customer service...Well they checked back with me a year later to see if I needed anything. How is that for the best customer service around! A
robertbenita - 06/30/2014


by:

5000 miles of trouble free towing!




by:
2002 Toyota Tacoma

Nice to not have to splice into vehicle wiring harness. Separate bulb assembly in existing tail light housing works great for towing our "TOAD" behind motor home.


Comments
Still works great after a year of towing to many destinations.
Kevin M - 09/02/2020


by:
2019 Chevrolet Equinox

I ordered a Bulb and Socket kit for my 2019 Chevy Equinox. I’m getting ready to install it this weekend. I am disappointed in a couple of things so far. The kit was clearly a return from another customer. The packaging was cut open and taped closed, and the inside bag of small parts was also cut open and stapled. I don’t know if something was defective. So that is concerning.

Also odd is that the online instructions refer to using “the self-tapping screw” for a ground, but it’s not included. Had I known, I could have ordered it with the baseplate and kit, but too late now. Why not include it?

The online instructions and video depict and give instructions for wiring the harness to the 6way plug, again, not included. This kit included some rather flimsy flat 4way plugs on the wiring harness. I will need to cut those off and order a 6 way receptacle. Again, had I known ... since shipping is included only with orders of $100, not excited to find I need small extra parts, that I now have to get elsewhere, and quickly.

So hopefully the install will go well. I like the videos.




by:

Easy install,works great




by:
2013 Dodge Durango

I purchased a Blue Ox base plate, Air Force One braking system, and a light kit for my 2013 Durango. I could have not asked for an easier process with selecting and ordering, also the tutorials and videos were a great help in determining what was the best system for me . Everything arrived as planned and in great condition. This is not my first time using etrailer.com and my prior experience was equally good.


Comments
After using the items I reviewed, about 6,000 miles, I am more than satisfied. The towing setup is easy to hook up and unhook and the braking system is second to none. All of the installation was completed by myself and a friend, both of us have a technical background him more than me and we found the videos of the installation extremely helpful.Thank you for following up and providing excellent products as well as support services.
Ken G - 10/23/2017



by:

I like this product and would definitely buy it again. I like not having to splice into the vehicle wiring and install diodes, etc. It is a clean installation with good instructions. All I have to do to hook up the lights is raise the hood of the towed car and pull out the pigtail and hook it to the motorhome. It is powered by the motorhome and does not run down the battery in the towed car. Great product.


Comments
Works great! Would definitely recommend it.
Gary Y - 08/19/2017



by:
2004 Honda Pilot

Yet another good product/service provided by etrailer.com. Even if they are a bit more on their price I generally use etrailer.com because of their excellent service. Top notch company. This Wiring Kit went in just as advertised. Of course it took me longer than I expected but that is normal for me. I work slow but my result is always a first class install! :-)




by:

Works great.




by:
2007 Jeep Wrangler Unlimited

Good instructions. Everything need is included for 4flat connections. One bulb socket arrived with the ground (black) wire loose in the bag. The solder joint had failed. Resoldered but had to remove the other wires and rubber insert from the bulb socket to avoid melting. Not a shining example for Roadmaster.


Comments
no issues, working as expected
Joel - 08/16/2015



by:
2010 Jeep JK

Great idea. After years of towing with magnetic lights now all I have to do is plug it in, and I'm done.
The kit kit comes with more parts and wire than I needed and was simple to install on my 2010 JK.


Comments
Thanks Patrick. It works so well I forgot I had it.
Frank S - 06/27/2014


by:

Works just as expected. My installer had no problems.




by:

I have used the brake light wiring kit on 2 other towed vehicles. It is an easy install, does not compromise the original factory wiring and works well.


Comments
Easy install, working well 1 year later.
Robert - 11/12/2018



by:

Kit was of good quality components. I would recommend about twice a much protective wire wrap along with extra of the smaller butt connectors. Fortunitely I had what I needed on hand. I also used a larger ring terminal.


Comments
Works great. 2002 Jeep Wrangler tail lights have plenty of room for the extra tail light bulbs.
Jack M - 05/09/2020


by:

This kit really simplifies wiring tail lights on a vehicle that will be towed. No cutting into the vehicle's wiring and adding isolation diodes. Very functional and easy to install.


Comments
The parts are working perfectly. Thank you.
Kim P - 01/26/2016



by:

I really didn't want to install a separate bulb kit but our Equinox light was not compatible with our motor home. I was also installing a trailer lighting harness for the Equinox at the same time and doing them together made a lot of sense. I found this kit to be easy to manage and that drilling into the rear light housings not nearly as difficult as I had imagined. I would share a picture of the result but fortunately there is nothing to see - everything fit right into the Equinox's rear lamp structure. I compared the original lights with those from the kit driven by the RV and found them to be a great match. I upgraded the kit bulbs to LEDs for greater longevity.




by:
1999 Mazda Miata

I purchased this wiring kit for use in my 1999 Mazda Miata.
I did not want to cut into the OEM wiring harness, even using the diode method to safeguard the system. I felt that the fully separate wiring harness was more to my way of thinking for getting my car ready to tow.

I did not follow the included instructions that said to run the flat 4 wiring beneath the car, zip tying it along the way free of the exhaust and moving parts. I ran it through the firewall, beneath the dash, under the center console, and under the carpeting back into the trunk area. I then installed the bulb holders as instructed in my OEM Miata taillight fixtures.
I am happy to have all the wiring up and out of the way of potential road hazard damage, as well as the hot and/or moving parts beneath the car.

It works perfectly, and I am glad that I purchased this kit, and also that I decided to install it the way I felt best to do so.
It took much longer my way, but I'll never have to mess with it again.




by:

Video was great help although it missed access cover rear passenger side which had to be removed to finish installing rm-155 wiring. Couldn’t DYI without the video though




by:
1995 Jeep Wrangler

I order Blue ox base plate bracket kit BX 88230 and light kit RM-155 for my 1995 jeep so I can tow it with my motor home price was great shipping was
Quick . They were easy to install and made of good quality .The kits had
great instructions I am very happy with purchase William in CA.




by:
Jeep Grand Cherokee

Bulb kit included everything needed.
Plenty
of wire sent.
Did not use supplied 4 wire connectors, used HM47056 for toad to motor home connection. Ran wires inside cab along with Invisibrake lines.

Fast delivery.
Good price.
2002 Jeep Grand Cherokee Limited. Jeep had available spot to place bulbs in rear tail light lens at lower portion. Easy install once wires were run.




by:
2007 Honda CR-V

Great product, not a bad install and works great. I chose to cut off both 4 flat connectors and I installed a 4 round connector with spring cover on the front of my CRV. Looks and work out great.


Comments
Still working fine.
W. D - 07/19/2017


25
212
Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Wiring



  • Size of Hole Needed to Install Roadmaster Bulb and Socket Kit # RM-155 In Taillight Assembly
    To use the Roadmaster Bulb and Socket kit you referenced, part # RM-155-2, you'll need to drill a 1 inch diameter hole in the rear of your taillight assemblies. You'll want to make sure you have at least 2-1/2 inches of available depth, because if the bulb is too close to the inside of the lens, the lens could melt. The full kit that includes the connectors and wire is part # RM-155. I'll link you to an install video that you should find helpful.
    view full answer...
  • What Size Hole Is Needed For Mounting Bulb And Socket For Taillight Assembly
    To install the Roadmaster Bulb and Socket Kit, part # RM-155-2, you will need to drill a 1 inch diameter hole in the rear of your taillight assemblies. You want to make sure you have at least 2-1/2 inches of available depth, because the heat from the bulb could melt the lens if mounted too close. A hole saw is probably the best option for drilling a 1 inch hole. If the entire kit is needed, you can order part # RM-155. I have attached an installation video you can check out.
    view full answer...
  • Tow Bar Lighting Recommendations for a 2012 Honda CRV
    I checked with Roadmaster and the Bulb and Socket Set # RM-155-2 that you referenced will work on your 2012 Honda CRV. For the entire kit you would want part # RM-155 though.
    view full answer...
  • Will the Roadmaster Bulb and Socket Kit Fit a 2010 Honda CR-V
    I checked with Roadmaster and they do list the bulb and socket kit, # RM-155, as a fit for the 2010 and 2012 Honda CR-V. However, to be certain I recommend drilling a 1/16 inch hole in the back of the tail light housing and then using a small piece of rigid wire or something similar that will fit in the hole, push it in as far as it will go, and then measure how much of the wire goes inside the housing. This will tell you how much space there is. You will need about 2-1/4 inches of depth.
    view full answer...
  • Are Light Sockets in # RM-155 Available Separately From Rest of Kit
    The lights sockets you refer to are indeed available without the rest of the kit. You would need part # RM-155-2, which you can see by clicking on the provided link.
    view full answer...
  • Installing Ground Wires of Roadmaster Tail Light Bulb Kit for a Flat Towed Vehicle
    Generally, when installing # RM-155 the ground wires are combined and connected to the vehicle frame in one location. However, as long as you're using a good, clean mounting point the grounds can be connected on each side.
    view full answer...
  • Hole Size Required to Install Roadmaster Bulb and Socket Kit RM-155-2
    To use the Roadmaster Bulb and Socket kit you referenced, part # RM-155-2, you'll need to drill a 1 inch diameter hole in the rear of your taillight assemblies. You'll want to make sure you have at least 2-1/2 inches of available depth, because if the bulb is too close to the inside of the lens, the lens could melt. The full kit that includes the connectors and wire is part # RM-155.
    view full answer...
  • Will the Roadmaster Taillight Wiring Kit # RM-155 fit a 2007 Saturn Vue
    Yes, I checked with Roadmaster to confirm that the Roadmaster Tail Light Wiring Kit # RM-155 that you referenced would work on your 2007 Saturn Vue and it does. I attached installation instructions and an install video for you to check out also.
    view full answer...
  • How Do You Replace Burned Out Bulbs of a Bulb and Socket Flat Towing Wiring Kit
    In the event of a burned out bulb on the Roadmaster Tail Light Wiring Kit part # RM-155 you would need to remove the socket from the back of your light assembly, change the bulb, clean off the old RTV and then reapply new RTV to reinstall the socket. The inside of the housing does have reflectors to help make the light more visible. However, the bulbs of this kit are very bright and I can assure you they will be visible. If you check out the video I attached and fast forward to the 7:15...
    view full answer...
  • Are Diodes Needed When Using the Roadmaster Tail Light Wiring Kit # RM-155 on 2014 Buick Enclave
    Diodes are only for situations where you are using the towed vehicles factory tail lights and wires. When using the Roadmaster Tail Light Wiring Kit, # RM-155, it provides dedicated tail lights and wires so diodes are not needed. I have attached a picture which shows the recommended location for drilling and installing the bulb and socket.
    view full answer...
    Image 1 for
  • Diagram for Wiring the Sockets of the Roadmaster Taillight Kit part # RM-155 to the Wiring Harness
    To wire the sockets of the Roadmaster Taillight Kit part # RM-155 to the wiring harness you will just need to follow the diagram I attached that details where each wire goes. I also attached installation instructions and an install video for you to check out.
    view full answer...
    Image 1 for
  • Installing RM-155 Tow Bar Wiring On a 2014 Jeep Wrangler Unlimited
    I don't have a diagram available to show you exactly where the best spot to drill the hole for installing the bulb of the part # RM-155 that you referenced. The best recommendation I could make would be to go with the side like you mentioned. It's okay if the fit is tight as long as it will fit. This is a universal fit item that has been confirmed to fit your 2014 Jeep Wrangler, but installation instruction specific to your vehicle aren't available. I did attach an install video for this...
    view full answer...
  • Flat Towing Taillight Wiring Options for 2014 Jeep Grand Cherokee
    According to Roadmaster, their Bulb and Socket Taillight Wiring Kit, part # RM-155 is indeed a fit for your 2015 Grand Cherokee. I don't have any installation photos or video footage of it being installed on your vehicle, but I've linked you to a video showing the kit being installed on a 2014 Jeep Patriot. It's a different vehicle, but the procedure would be similar. I'll link you to some help articles about flat towing, as well as other flat towing accessories that are a fit for your...
    view full answer...
  • Will the RoadMaster Tail Light Wiring Kit # RM-155 fit a 2011 Ford Fusion
    Yes, I checked with Roadmaster and the RoadMaster Tail Light Wiring Kit # RM-155 that you referenced will work on your 2011 Ford Fusion. I attached a couple FAQ articles on tow bar wiring that you might find informative also.
    view full answer...
  • Tips for Installing the Roadmaster Tail Light Wiring Bulb and Socket Kit on a 2008 Honda Pilot
    I recommend removing the tail light assemblies on your 2008 Honda Pilot before drilling into the back of them to install the bulbs. Also make sure that you do not drill through any vital components on the assembly. The wiring should be able to get routed down through the vehicle through where the tail light assembly mounts. When drilling, use bits that are made for plastic and start with a small pilot hole first and work your way up to the correct size for the bulbs. When routing the...
    view full answer...
  • Wiring Roadmaster Bulb and Socket Kit # RM-155
    The green wire running from the front connects to the red wire on the bulb and socket unit on the passenger side. The yellow wire from the front connects to the red wire on the driver side. The brown wire from the front connects to the brown striped wire from both the driver and passenger side. The white ground wire from the front connects to the black wire on the drivers side, and will also ground to the vehicle frame or chassis. The black wire on the passenger side will also ground to...
    view full answer...
    Image 1 for
  • Will Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 Fit a 2008 Saturn Vue
    According to the Roadmaster, the Roadmaster Tail Light Wiring Kit with Bulbs, part # RM-155, will fit in the tail lights of your 2008 Saturn Vue. The # RM-155 kit will require you to drill a 1-inch hole in the back of the taillight housing right under the red lens. It uses the standard #1157 bulb which measures 1.83 inches tall and .97 inches width of the bulb. The sockets measures .95 inches where it goes into the lens. The instructions show to drill a 1 inch hole in the taillight housing...
    view full answer...
  • Is a Supplemental Braking System Required when Flat Towing a Vehicle Behind a Motor Home
    Supplemental braking systems are required by law in most states (with the exception of Missouri). In addition to being required by law, a braking system is just a good idea in general. It prevents all the braking being done by the towing vehicle which will reduce the wear and tear on it. Also stopping distances will be shorter because you will not have the toad momentum pushing you through an intersection. I have included a link to our FAQ article on supplemental braking systems that should...
    view full answer...
  • Will the Roadmaster Bulb and SOcket Tow Bar Wiring Kit Fit a 2011 Nissan Versa Hatchback
    We have not had anyone come to us with specific problems related to a 2011 Nissan Versa hatchback and tow bar wiring kit # RM-155. There are some things about the bulb and socket kit that you need to be aware of. There is drilling involved with the installation of this kit. You have to drill into the back of the tail light housing to mount the bulbs. There needs to be enough space inside the housing for the bulbs to fit without melting the tail light lens. There needs to be 1/4 inch of...
    view full answer...
  • What Are Drilling Specifications When Installing RoadMaster Wiring Kit # RM-155 on 2014 GMC Sierra
    In the instructions, which I have attached for the RoadMaster Tail Light Wiring Kit # RM-155 does not give you specific mounting points. What they do give you are parameters to guide you to the correct location. According to the RoadMaster fit guide, if your 2014 GMC Sierra is the 1500 then this wiring kit will fit. My RoadMaster technical contact confirms that this kit has not been tested on the 2014 GMC Sierra 2500 or 3500 so they cannot verify this kit will fit. RoadMaster states...
    view full answer...
  • Best Tow Bar Wiring Kit for a 2009 GMC Envoy Non-Denali
    I checked with Roadmaster and they do show that the Bulb and Socket kit, # RM-155, fits the 2009 GMC Envoy with or without electric seats and not a Denali. We also have several other kits available and I have included a link to them for you to the right. I have also included a helpful link on tow bar wiring and a helpful link on flat towing.
    view full answer...
  • Will the Roadmaster Tail Light Wiring Kit, # RM-155, Fit in 2011 Honda Fit Lens Housing
    The Roadmaster Tail Light Wiring Kit with Bulbs, # RM-155, is a universal wiring kit, so it can be used on your 2011 Honda Fit as long as you have room in your taillight housing to drill a 1 inch hole under the red lens. It uses the standard #1157 bulb which measures 1.83 inches tall and .97 inches width of the bulb. The sockets measures .95 inches where it goes into the lens. The instructions show to drill a 1 inch hole in the taillight housing beneath a red lens to fit the socket and...
    view full answer...
  • Will Roadmaster Tail Light Wiring Kit with Bulbs Part # RM-155 Work on a 2007 Jeep Wrangler X
    The Roadmaster Tail Light Wiring Kit with Bulbs, part # RM-155 is a universal fit item that will fit many different vehicles. According to my contacts at Roadmaster, the bulb kit is a fit, and would work well for your Wrangler X. This kit is relatively easy to install, and will remain completely independent of the tail light circuits on your Jeep. I linked some information on selecting tow bar wiring that you may find helpful.
    view full answer...
  • Will the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155, Fit a 2008 Chevy Malibu
    I checked with Roadmaster and the bulb and socket kit, # RM-155, will fit a 2008 Chevy Malibu, but not a Malibu Classic. If you have the regular Malibu, the kit will fit. I have also included a link to other wiring options if you do have a Malibu Classic along with a link to all of our FAQ articles on flat towing.
    view full answer...


< Previous
123. . .27



Do you have a question about this Tow Bar Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tow bar wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tow bar wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Updated by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.