bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 3500 lbs
  4. 89 Inch Long
  5. 74 Inch
  6. Spindles Only
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Item # T3584F-EZ-8974
Our Price: $228.41
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs part number T3584F-EZ-8974 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (478)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles - T3584F-EZ-8974

  • 3500 lbs
  • 89 Inch Long
  • 74 Inch
  • Spindles Only
  • Leaf Spring Suspension
  • No Hubs
  • Dexter
  • No Drop or Lift
  • Easy Lube Spindles

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Bearings (sold separately):
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Brake flange configuration: 4 bolt


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T3584F-8974-EZ Dexter Replacement Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 3,500 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs - T3584F-EZ-8974

Average Customer Rating:  4.8 out of 5 stars   (478 Customer Reviews)

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).

by:

With Alex's assistance and knowledge of my trailer requirements, I installed two 3500 lb axles. These axles are superior to any others that I was shopping for, and with a combined GVW of 7,000 lbs my trailer is now suited for any medium sized load.




by:

Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer.
Your staff was of great help finding my right axle.
I would recommend etrailer to everyone.


Comments
Axle is working out great. Easy to install, fit perfectly.
Kenneth - 11/04/2018


by:

Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.




by: 08/17/2022

etrailer customer service for returns and their products as a whole are third rate at best. Every product arrives damaged from terrible packaging and handling by etrailer. Customer service sometimes responds and their return policy is garbage at best. buy elsewhere




by:

Came in bent


Comments
Axle should have a slight bend to it.
-- Etrailer Expert Sierra K - 10/12/2021


by:

Specs. matched exact to the broken axle and was easy to install. I was surprised that the axle was pre-wired although it was not replacement of the brake axle on my trailer. Hub fit nicely and trailer is now ready for the next haul job. Delivery was as promised.


Comments
The axle has been a good replacement and has worked as it should.
Ronald E - 08/13/2021


by:

Local supplier said this part was not available for months, E trailer delivered in a few days.


Comments
Trailer axle was a perfect fit and after going to several local dealers first, etrailer was the only company I could find the parts I needed during Covid. Parts have had no issues for a year of service.
Dalton R - 01/14/2022


by:

A was a great product fit perfectly arrived in great condition and timely manner i im super happy great job guys




by:

easy peasy

good price quick deli
very




by:

Just what the doctor ordered and fast d elivery.




by:

working great after 1 year of use and several thousand miles put on the axle.




by:

Etrailer was quick to ship and and axle was a perfect fit, axle was good quality.
i have used them before as well. they are a good company.
thsnks jack




by:

Great service as always out of etrailer. I ordered 2 new axles for my car carrier, great specs on your webpage made for a perfect match. Items arrived in 3 days, heavily wrapped and will add that the end of the axles which could rust if not installed soon were covered in grease, a nice touch to insure no damage. Thanks as always for having a great source for all things trailers!...


Comments
one year later no issues at all
Michael - 06/08/2020


by:

Axle is perfect. Holding up well after a year plus.




by:

I'm very pleased with all of my purchases from eTrailer. Everything has seemed to be of excellent quality and value. The wiring kits and directions were very well thought out and one of the projects I completed would not have been possible had it not been for the excellent videos on the website.

I'm an eTrailer customer for life!




by:

Friendly, curteous service and prompt receipt of ordered parts. I have told many people in Kodiak, Alaska about your superior
service, prices and demeanor. Thank you!




by:

very pleased with this product .precise measurements .arrived in a timely manner.top notch quality .would definatly buy from etrailer again




by:

The axle fit like a glove, It took about an hour and half by the time I put the tools away
I only had two jack stands make sure you have four or cinder blocks will work also and a new bearing and U bolt kit.
I was going thru one used tire a week because the axle spindle was bent now this trailer is riding smooth!.

They shipped the axle right away, very happy with the product and service from etrailer.




by:

The axel I bought was of good quality, cheaper than buying a local, and the shipping was free! I wish the website would have prompted me to buy the extra items I needed. Example: bolts and plates to attach the axle to the spring. Bolts for the brake assembly, wheels, tires, Springs etc. I did not need all those things but it would be nice to have them pop up as choices.




by:

Personal service was great. Received a call regarding an address issue; person from etrailer wanted to make sure address was correct prior to shipping. This ensured order received without delay. Axels are a perfect fit; on-line videos for installation are very helpful. All your videos are well done; informative and helpful. Prices were better than any local suppliers in the area. I still trade with local businesses, but for large purchases I go to etrailer.

The seal puller is a must have tool, works great!!




by:

My utility trailer bearings locked up and welded to the spindle, along with the seal. Repair would have cost as much as a new axle. Ordered this axle Thursday night around 10pm, Arrived Saturday morning around 10am. They were running a special and regular shipping was free but I paid for 2nd day delivery which was discounted. Actual product was as described, wrapped well end to end with rubber protectors over spindles. Installation was a snap and took about 20 minutes start to finish with no help. Still waiting on hubs to be delivered but I am expecting the axle to do what it is supposed to. I will definitely use etrailer again, and should I need another axle, I wouldn't think twice about ordering this one again. Excellent business with an excellent product.




by:

Needed a new 3500 pound axle for a 30 year old utility trailer, ordered a new one plus the u bolt kit, items were shipped the next day and received 3 days later.
Axle was a top quality Dexter axle. Both items were well packed for their trip. I will most certainly order all of my trailer parts from these folks, Great service, great parts and great follow up.




by:

Product was exactly as described and of good quality. Will certainly use etrailer again for my trailer needs.




by:

This is the second time I ordered off of Etrailer. Renée did an excellent job of putting together all the parts that I needed and they were all in stock. And I received my trailer axles hubs and bearings in four days almost all the way across the country Etrailer does an excellent job with quality parts




by:

The axles I needed were easy to order, great descriptions etc. I realize the hub's and brake drum were shipping seperate and required assembly but that's minor, everything was there. My second order had some minor issues with availability but I talked to Sandy J and she was a pleasure to work with. My corrected order came in 3 dsys. Very pleased thus with e trailer and will be ordering parts there again.



25
478
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Replacement 3500-lb Trailer Axle for 2007 Spree by KZ Tandem Trailer
    If your KZ Spree trailer's 3500-lb-rated axles are bent from damage or from overloading them beyond their weight capacity then they should be replaced. This will not only restore the trailer's handling but it will also prevent continued issues with uneven tire wear. Usually an axle that was bent from being overloaded will result in more wear on the inside edges of the tires. A new axle has a light upward bend that levels out under load. Our two 3500-lb-rated axles without hubs are displayed...
    view full answer...
    Image 1 for
  • Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
    Brake flanges on 3,500 lb axles are going to be the exact same between a Dexter axle and Lippert but sometimes the Al Ko options are different. I believe you are asking about the price difference between the Dexter 3,500 lb axles part # T3584F-8974 and # T3584F-EZ-8974 though which that comes down to the spindle style. The more expensive EZ lube spindle axle has a grease fitting on the end of it that allows you to easily pump grease into it whereas the other option does not and requires...
    view full answer...
  • Trailer Axle Availability that is 85-1/2 Inches Long
    We do not carry any axles that have 85-1/2 inches from hub face to hub face. The closest we have would be 89 inches from hub face to hub face like part # T3584F-EZ-8974. This axle also has 74 inches from spring centers.
    view full answer...
  • How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
    In order to determine which replacement axle is needed for your 1979 Avion Travel Trailer, we will need to know the axle's weight capacity as well as the spring center and hub face measurements. If you plan to reuse your existing hubs, knowing the bearing numbers will be helpful. If you will be replacing your hubs, we will need your bolt pattern. Please feel free to send me an email with your information and I would be happy to make a recommendation for you.
    view full answer...
    Image 1 for Image 2 for
  • What are the Wires at Each End of Dexter 3500 Pound EZ Lube Axle # T3584F-EZ-8974
    The wiring that you see on axle # T3584F-EZ-8974 is for electric brakes. So you would run the wiring back to one side of the axle, make the splices for the brakes on that side and, instead of running your own wire, it is already run through the axle. So all you will have to do is splice in the brake magnets on the other side. Take a look at the video I have linked. It is mentioned near the end of the video.
    view full answer...
  • How to Find Proper Length Replacement Trailer Axle
    In order to find the proper replacement axle, you'll need the hub face to hub face and spring center to spring center dimension of your existing axle (see diagram.) We offer a limited amount of off the shelf axles, if you could provide the abovementioned dimensions and the inner and outer wheel bearing reference numbers, I'd be happy to check to see if any of the axles we offer would work for you. You can see the axles we offer by clicking the provided link.
    view full answer...
    Image 1 for
  • What is Causing Wear on Outer Edge of Passenger Side Tire on Trailer
    I first recommend checking to make sure the tire is properly inflated to the maximum psi listed on the tire's sidewall. If the tire is under-inflated, the sides of the tire tread will wear quickly. If the tire is inflated properly, then it's very possible that there is an issue with the trailer's suspension components or axle/spindle. Since the wear you noticed is only on the outer edge of the tire, this might indicate that the spindle is not parallel to the ground. There could be a suspension...
    view full answer...
  • Locating Replacement Axles for 2002 Keystone Hornet Trailer
    If you are looking to replace the axles on your 2002 Keystone Hornet Trailer, you will first want to take a couple measurements on your existing units. You will start by measuring the distance from one hub face to the other. You will also want to measure from the center of one spring seat to the center of the other. I have included an image that clarifies these dimensions. Lastly, you will need to determine the axle capacity on the trailer to ensure you are maintaining the trailer's overall...
    view full answer...
    Image 1 for
  • Finding a Replacement 3,500 Lb Axle
    Based on your bearing numbers and grease seal, you have a 3,500 lb axle. We have replacements that will work so long as your current axle has has a hub face to hub face measurement of 89" (represented by the "A" in the accompanying photo) and your spring center to spring center length is 74" (represented by the "B"). I recommend going with Dexter Axle with E-Z Lube Spindles # T3584F-EZ-8974, which has built-in grease zerks for very simple lubrication. I have added links to video reviews...
    view full answer...
    Image 1 for Image 2 for
  • Choosing the Correct Replacement for a Bent Axle
    In order to choose the correct replacement axle, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added; the other thing you would want to know is the weight capacity of the axle you need. I've added a link to our selection of axles for you to take a look at.
    view full answer...
    Image 1 for
  • How to Determine the Weight Capacity of a 20' x 8.5' Cargo Trailer with Two 3,500 lb Axles
    There is a little more that goes into calculating how much weight you can carry than just adding the axle weight capacity, but it is a good start. Any time you are carrying weight you will be limited by your least rated component. So even though your axles may have weight ratings of a combined 7,000 lbs, if your trailer frame is only rated for 6,500 lbs then that is what you are limited to. There should be a sticker or stamp somewhere on your trailer frame that has a GVWR (Gross Vehicle...
    view full answer...
  • What Size Axles are On a 2001 CarMate 14 Foot Enclosed Trailer?
    Unfortunately I am not able to tell what axles you have on your trailer without more information from you. The easiest way to tell a capacity is by simply measuring the diameter, but the more accurate option is to pull off one of your hubs and get the bearing numbers from your inner and outer bearings as well as the seal. I've attached an article to assist in getting that information. Typical Axle Diameters Based on Axle Capacity: 1,000-lb - 2,000-lb Axles: 1-1/2" - 1-3/4" diameter 3,500-lb...
    view full answer...
  • How to Pick Out Replacement Trailer Axle for Boat Trailer
    We only have a few select few axles available currently, but to pick out an axle you will need to know the hub face to hub face dimension of your current one, the capacity of it, the distance between the spring seats on center, and the bolt pattern of the hubs that are currently on it. With that info you can check out the link I attached that has all of the trailer axles we offer. Using the filters on the page you can narrow down the list. If you can't find one that will fit you will want...
    view full answer...
  • Why do Trailer Axles have an Upward Bow In Them
    Trailer axles typically have the bow you mentioned in them to help compensate for the vertical load they bear and still have proper wheel camber. This way when the load is put on them the axle will flatten out and the wheels will be aligned properly. Square axles are a bit of a wild card though as they aren't as standard as the round tube axles. I have seen totally straight ones and I have seen curved ones.
    view full answer...
  • How to Determine if 89 inch 3,500 Dexter Axle # T3584F-EZ-8974 Will Work on Flat Bed Trailer
    Since your spring seats are 74 inches apart on center the part # T3584F-EZ-8974 will bolt up easily. The hub face to hub face dimension is 89 inches like you mentioned. Basically this will be exactly where the tire's center will be. So you might measure between the tire centers to find out where the wheels would end up if you went with this axle. If you had two of these you'd have a 7k axle capacity. If that's adequate then this would work well. If you need more, or the dimensions mentioned...
    view full answer...
  • Is 23 inches from Spring Seat to Hub Face Too Long
    At 8 or 9 inches you're good but not at 23 inches per side. If this is a build you are doing then the frame width will have to be greater. Otherwise you will run into suspension, tire wear, and running gear problems. I checked with Dexter Axle but could not find a minimum or maximum. Another option is to use a Timbren Axle-Less system, see link, so that the frame spacing would not matter. Also they have built-in suspension so you would not have to worry about maintaining leaf springs and...
    view full answer...
  • Can 89" Inch Hub to Hub Axle Length be Used in Place of 88" Axle if Spring Seat Distance is the Same
    You can still use axle # T3584F-EZ-8974 if the spring seat centers match up like you said. The hub face to hub face measurement is only off 1/2 inch on each side which isn't going to cause you any problems.
    view full answer...
  • How to Determine if 3,500 Hubs will Fit Axle Hub T3584F-EZ-8974
    Most 3,500 lb trailer axles out there are Dexter axles like the part # T3584F-EZ-8974 that you referenced. Or another very popular brand is Lippert. Most likely you have one of those two and that would mean that your current hub would fit the spindle of the # T3584F-EZ-8974. This comes with a stepped spindle and a castle nut with a cage type cotter pin setup like you mentioned having. What you can do is measure the diameters of the spindle on your axle where the bearings ride to know for...
    view full answer...
    Image 1 for
  • Spring-Center-To-Spring-Center Length Of Dexter Trailer Axle Beam T3584F-EZ-8974
    The distance from spring-center-to-spring-center of the Dexter Trailer Axle Beam, part # T3584F-EZ-8974 is 74-inches. This axle is designed with a weight capacity of 3,500-lbs and the hub-face-to-hub-face measuresment is 89-inches. I have attached a drawing that shows these dimensions you can check out.
    view full answer...
    Image 1 for
  • How To Determine What Length Axle Is Needed And Its Rated Weight Capacity
    We can determine the axle length you need by measuring your current axle from the hub face (surface where the wheel attaches) to the opposite hub face. Then you will need to measure from the center of the leaf spring to the center of the other leaf spring. You can determine the capacity by measuriing the diameter of your axle. - 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter - 3,500-lb Axles: 2-3/8 inch diameter - 6,000-lb - 7,200-lb Axles: 3 inch diameter - 8,000-lb Axles:...
    view full answer...
    Image 1 for
  • Replacement Axles for 2004 Big Tex Trailer
    Based on the numbers you listed the part # T3584F-EZ-8974 is a match. The hub face to hub face dimension is 89 inches, the spring seat dimension is 74 and the capacity is 3,500 which your listed numbers indicate as a match. I attached an install video for you to check out as well.
    view full answer...
  • Availability of 3,500 lb Trailer Axle
    We only carry a select few axles at this time but we do carry a few 3,500 lbs axles. What measurements do you currently have? The only size we have is the part # T3584F-EZ-8974 which is 89 inches from hub face to hub face and 74 inches from spring seat to spring seat. If you have different dimensions you'll need to find a local trailer shop who can order you in custom axles based on the dimensions you have.
    view full answer...
  • Axle Recommendation with 74 inch Spring Center Dimensions
    Of the axles that we carry the part # T3584F-EZ-8974 that you referenced would be the closest one we carry to what you would need. The spring center measurement is the same at 74 inches. The issues is that this axle measures 89 inches from hub face to hub face so it would be 2 inches shorter than what you currently have. If the wheels and tires could be an inch closer to the frame on your trailer on either side without causing interference this axle would work well for you. Otherwise you...
    view full answer...
  • Replacement Axle for a 1994 Jayco Eagle 8 with Dexter Axle
    It sounds like you will need a 2,000 pound axle. We do not carry the torsion straight axles though. We do have axle-less systems that work the same as torsion axles. I have included a link to them for you to view. The great thing about the axle-less systems, besides the better ground clearance, is that you don't have to have a specific axle length and in your case you would not have to add suspension components like you likely would if you went to a straight axle.
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Lindsey S
Written by:
Lindsey S
Employee DeAnne T
Updated by:
DeAnne T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Jeff D
Installed by:
Jeff D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Alan C
Video by:
Alan C
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.