bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 2000 lbs
  4. 60 Inch Long
  5. 48 Inch
  6. 5 on 4-1/2
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs

Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs

Item # 20545I-ST-60-10
Our Price: $270.07
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 33 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Round trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 10" wheels. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs part number 20545I-ST-60-10 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (293)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles - 20545I-ST-60-10

  • 2000 lbs
  • 60 Inch Long
  • 48 Inch
  • 5 on 4-1/2
  • Leaf Spring Suspension
  • Idler Hubs
  • Dexter
  • No Drop or Lift
  • Standard Spindles

Round trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 10" wheels.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindle - no drop
    • Standard grease application
  • Spring seats and spindles are welded on
  • Cast iron idler hubs are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


Specs:

  • Weight capacity: 2,000 lbs
  • Hub-face-to-hub-face length: 60"
  • Spring-center-to-spring-center length: 48"
  • Bolt pattern: 5 on 4-1/2"
  • Tubing outer diameter: 1-3/4"
  • Spindle size: 1-1/16"
  • Grease cap outer diameter: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 8" - 10"


Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L44649
    • Inner bearing: L44649
  • Races
    • Inner race: L44610
    • Outer race: L44610
  • Seal: 10-9
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


T20BTR-6048 Dexter Replacement Axle Beam - 60" Hub Face - 48" Spring Center - 2,000 lbs

8-259-5UC1Trailer Hub Assembly for 8" to 10" Wheels - 2,000-lb Axles - 5 on 4-1/2 - L44649

457458 Loctite Viper Lube High Performace Synthetic Lubricant - 14.1 oz Can





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs - 20545I-ST-60-10

Average Customer Rating:  4.8 out of 5 stars   (293 Customer Reviews)

Round trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 10" wheels.

by:

Very fast delivery for a axle and hubs. Spring center for my trailer was a 47 and all places only had 48’s. Welded the spring mounts a 1” shorter and all was great. Very good quality axle it will work great. Sorry no pictures of my project, time crunch.




by:




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


After years of hauling firewood my Harbor Freight Trailer Axle fatigued and cracked. The Dexter Axle from etrailer got me back on the trail. Welded leaf spring seats on the opposite side of the axle at a spacing of 46.5 inches. The wheels stick out an additional 3/4 inch per side. The trailer now rides like a Cadillac. Very excited about putting my faithful trailer back in service, with a serious axle underneath that I have confidence in. The folks at etrailer very helpful and responsive. Thanks


Comments
Wonderific! Hauled camping gear up to Lake Tahoe 600 miles round trip, including my 5000 watt generator. Even had a big bear jump in the back to inspect that load when I arrived. The dexter turned the trailer into a very reliable and road worthy hauler. Since installing, made many trips up in Sierra to haul firewood and its been flawless!
Carl Z - 09/03/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Parts fit as advertised, very satisfied with purchase. I new nothing about replacing a trailer axle info on web site and support provided were excellent.
Definitely would recommend etrailer




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Prompt delivery. Shipment was well protected from in transit damage.The axle fit my trailer perfectly and the u-bolts I ordered with the axle fit as they were supposed to. My wheels were old with a slightly larger bolt circle than the new hubs. Before I abrasive saw cut the old u-bolts, I tried the new hubs with the old wheels and they did not match up. I had to get new tire and wheels with the 4.5 bolt circle mounting holes. Not a big deal as I needed to replace the ties anyway. But testing the old wheels with the new hubs before cutting the the old u-bolts meant I didn't have downtime on the trailer while waiting for the new wheels and tires. The whole changeover, removing the old axle, installing the new axle, and mounting the tires took me about 3 hours at a leisurely pace.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I purchased a number of products from etrailer and I am very pleased with them all. The shipper lost my axle. When I contacted etrailer customer service, they handled my problem quickly and I had a replacement axle in a couple days. Well done!

The products were all of high quality and the assemble was much easier as a result. I have attached a few pictures of the build for those interested.

Thanks etrailer for your great products and service!!


Comments
I love these springs. The trailer is well supported and rides perfectly on the road. The trailer has performed better than my expectations. The products I purchased are all performing perfectly. When I build my next trailer, I will get all my assemble products from etrailer.com
Jim D - 01/02/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I ordered my axle kit and received it 30 days later, I expected it in a week. The hubs, U-bolt kit, springs and grease were shipping in a box, when I receive it the heavy parts had smashed the grease tube, and was quite the mess in the box. The U-bolt kit I ordered as suggested by etrailer was the wrong kit and the bolts were short (their system did not suggest the right kit for the thicker springs). I see there is a kit I could have ordered with longer bolts. When I went to tighten the lug bolts on the new hub I received, one bolt started to pull through the hub. I reported the grease problem to etrailer, they could not care less, so I thought it would not be worth my time to report the other issues. I guess I will purchase new u-bolts, grease, and perhaps a hub somewhere else.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Product seems to be built well. I was missing a set of outer bearings that I had to get from a local tractor supply due to time constraints. They were missing when shipped to me. I have been happy so far with this product as I have pulled my home built teaardrop on it. I have traveled over 3k miles with it as well as a tire set I purchased from etrailer.
Contender ST205/75R15 Radial Tire w 15"
Good sturdy wheels and tires and they look good in person.


Comments
These products have been working out awesome so far after a year. I have taken a lot of trips and ordered other items. I am a happy customer and recommend this site to people I show my tear to.
Steve - 06/02/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Missing parts. I've been in contact with customer service all week, I still don't have the missing parts.


Comments
Thanks for reaching back out. I will reach out to our customer service team and make sure you are up to date on your order.
-- Etrailer Expert Brooke M - 10/07/2022


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Axle is two inches longer than the original axle on a 1986 trailer but the tires still ended up neatly tucked under the fenders. It was shipped lightning fast, was easy enough to install and has worked flawlessly for just over 10,000 miles now. Excellent!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I recently purchased a 1997 Pacific boat trailer, 2,000 lb capacity. Installed new lights, spare tire carrier, and tongue jack two months ago. Decided I may as well replace the wheel bearings and seals only to discover the spindles had deep gouges from the seals or material between the seal and spindle shaft. The right side (as viewed from the rear) even had a deep gouge in the seal area from who knows what. Surprisingly, the wheel bearings were fine.

My initial intention was to use what is called a "speed sleeve" to repair the seal contact area on the spindle, in addition to replacing the wheel bearings. The bearings were an odd size, thus somewhat expensive. Cheaper to replace the hubs but with the "speed sleeves", would come out to nearly $200, notwithstanding my labor.

To the rescue, etrailer! I measured my existing axle per the directions from the staff and ordered a replacement axle with hubs and a U-bolt kit for nearly the same price. Shipping was surprisingly fast given current events and a brand new axle and associated parts were delivered last night (8 April, 2020).

I've replaced wheel bearings before but have never replaced a trailer axle, so I was initially somewhat intimidated by the job. I jacked the trailer up to remove the wheels and used jack stands to ensure it would remain that way while I proceeded to remove the old axle.

The u-bolts (not quite a U given the square axle) were not too bad to remove. I used copious amounts of WD-40 on the threads and an adjustable wrench did the rest of the work. I was going to use an air ratchet but did not have enough clearance and did not wish to risk raising the trailer any further.

The old axle came out fine and was a bit heavy, around 50 lbs by my reckoning. Given the service life of 23 years, I'd say it did a good job (it was the original axle). Interestingly, the new axle weighed a good 10 - 15 lbs lighter...

The new axle went in fine, although due to the camber, which the original axle did not have, it took a bit of "squeezing" to get the holes on the spring seats. Nothing terrible, and my initial measurements were correct.

I did not take photos of the bearing and seal installation process as my hands had a fair amount of grease on them but if you follow the instructions, it is relatively simple. Make sure you "cup" the outer bearing area with grease in your palm to force it between the rollers. You will know when you have enough as it will be pushed between the rollers on the other side. Take a look at some [online] videos if you have never seen it done before. I believe there is a video on the etrailer website.

I used a short piece of 2x4 to install the seals and they went in without fanfare. I would recommend wiping a thin film of grease on the seal seating area of the hub prior to seal installation.

Installing the hubs was relatively straight forward, I seated the bearings while rotating the hubs to the recommended 50 ft/lbs. Then backed off WITHOUT rotating the hub, finger tightening, and installing the locking clips, which I have never seen before as I typically use cotter pins.

I installed the wheels and will be installing my "Bearing Buddies" later this afternoon.

All told, the job took me approximately 2 1/2 hours, maybe 3. I took my time and did my best to ensure it was a safe evolution given that the trailer had to be raised enough to allow axle replacement.

I will re-torque the u-bolts after some use and will probably re-seat the bearings as well. The price on the new bearings and seals is a significant improvement over what had come standard with the trailer.

Tools used were a 3/4" socket and 3/8" drive ratchet, 10" adjustable wrench, 1 1/2" socket and 1/2" drive torque wrench, 1/2" socket for the new u-bolts, a soft faced hammer to remove the "Bearing Buddies", (2) jack stands, and standard floor jack. Paper towels were most helpful during the bearing greasing and installation process...

If you have never done this before, like me, I can assure you it was relatively straight forward and I'm sitting here somewhat proud of myself...

Kudo's to the staff at etrailer!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I would be happier if this axle had come with the hubs assembled. I am still struggling with getting that done.


Comments
Here is a video link to help you with installation.
-- Etrailer Expert Andrew N - 10/13/2022


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products.
Thanks E trailer.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Super fast shipping! Everything arrived in one piece, I was a bit worried because the box was ripped on one side. Everything I ordered is of the highest quality and you certainly get what you pay for. If I need trailer parts, I'm shopping here!!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Quick delivery with tracking link! Great product and price!! Easy process to install axle and hubs. I would have appreciated a torque specification for the U-Bolts and Lug nuts in the video. I didn't take the time to search other locations or Q&A.

Tip: 1-1/2 " PVC makes a great tool to seat the grease seals. I used my 28MM socket, it was very close to size. I decided to use 2" Schedule 40 PVC pipe to install the E-Z Lube dust seal. I have many tools however no wooden hammers.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Great axle. Very pleased with it. I was shipped the wrong axle butt etrailer sent the correct one and I was able to ship the wrong one back later. Got me on the road a little quicker.
Other than that mishap,Ian pleased with the axle and would consider buying from etrailer in the future.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Really good solid axle... I needed the mounting tabs moved and had a metal fabricator do the work for $20.00. This was used on an old boat trailer that I turned into a utility trailer. Also swapped out the springs with ones purchased from etrailer too. To complete the package I ordered (3) 165/65-8 trailer tires. The trailer tows straight and hauls everything I've ever needed to.


Comments
This axle and springs are perfect for what I was looking to accomplish. Trailer tows straight and true and has saved me with large items on several occasions. I no longer have to drive 45 minutes to borrow a truck to haul stuff...
Honest E - 05/02/2017


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Even though I have not yet had a chance to put all the parts together, they all appear to be well made. Shipping was fast. My only recommendation would be to not just “throw” some of the small parts (e.g. spring seats) loosely in the shipping box. I only received one of two spring seats, however, when I informed customer service of the discrepancy I received it shortly thereafter.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Maria K. went above and beyond to get me my trailer parts. Shipping was fast and I am extremely impressed with the service I received. Thank you.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Worked out great, fit perfect, hubs went together smoothly, I would recommend you guys to anyone who needs trailer repairs! Thank you




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I had a seemingly uncommon axel on my Haulmark 16', tandem axel, enclosed trailer. 95" with spring center of 82". Couldn't find these specs anywhere, so I ordered Dexter 95"with 80" spring center. Had a friend move the spring brackets to 82". Took him about an hour total. I installed new axel yesterday. Without ant assistance, I was able to install the new axel in about an hour. Perfect fit. Great price, panphenomenal and fast shipping.
Will be ordering a new axel for my flatbed soon.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Fits as it should. EZ lube hubs are much easier than having to repack the bearings. This is the second purchase I’ve made from etrailer and their service has been great.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


E trailer has excellent products and great customer service. I really think the videos on each product is very very helpful. I’ve had dealings with other trailer parts vendors and etrailer is the best of all to deal with. Hats off to this well organized company. They will stay on my trailer need list.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Great service, I delt with Amy and she was super helpful, I had ordered the wrong item and she helped me get the correct one and informed me how to handle the return.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I think I'd like to change the review to 3 stars and say:
Though the mechanical quality of the axle/hubs is great, whatever the axle and hubs are painted with comes off very easily. Simply removing tape would pull the paint with it. This will eventually lead to these parts rusting and you'll need to add an additional coat of paint to prevent rust. The paint quality is very poor



25
293
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Axle Upgrade for my Harbor Freight 1720 Utility Trailer
    We can very likely get this worked out. Can you tell me how far it is from spring center to spring center? This is the distance from the middle of one spring to the middle of the other. We will also need the hub face to hub face measurement. This is the distance from where the wheel touches the axle to the same spot on the other side. This will tell me if I have a stock replacement upgrade like the Dexter Trailer Axle with Idler Hubs part # 20545I-ST-60-10 available or if we would need...
    view full answer...
  • Hub-Face to Hub-Face Length of Dexter Trailer Axle
    The 60 inch measurement of the Dexter Trailer Axle # 20545I-ST-60-10 is the hub-face to hub-face measurement. That is from the outside of the hubs when they're install on the spindles. I've attached a diagram showing this.
    view full answer...
    Image 1 for
  • Does Spring Seat to Spring Seat Dimension of Trailer Axle Have to Match Perfectly for Replacement
    You really have to match the distance between the spring seats exactly when replacing an axle. You could move the spring seats of the # 20545I-ST-60-10 a 1/2 inch in on either side to match the dimension you need since this is the closest axle to the dimensions you need. Or you'd have to find a local trailer shop to you who could order you in the axles you need based on this dimension matching as well as the hub face to hub face dimension of your old axle. I attached a picture that has...
    view full answer...
    Image 1 for
  • Replacement Axle For A 4x8 Trailer With Overslung Suspension
    In order to replace your current over slung axle on you 4x8 Harbor Freight trailer with the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs Item # 20545I-ST-60-10 you would need to have a Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1 Item # TRSS175 welded on the top of the axle on each side. We do not currently offer an overslung combination for that axle size.
    view full answer...
  • Wheel Size Limit on Dexter Trailer Axle
    The Dexter Axle part # 20545I-ST-60-10 is a 2,000 lb axle made for lighter trailers that traditionally use 8 or 10 inch wheels. The hubs that come with the axle are idler hubs for trailers without brakes with a 5 on 4-1/2 bolt pattern and a part # L44649 for inner and outer bearing. The 5 on 4-1/2 bolt pattern and L44649 bearing is common for 12 and 13 inch size wheels so you can upgrade your wheels, tires and hubs in the future if you have the clearance on the trailer to do so. The larger...
    view full answer...
  • Recommended Replacement Axles and Leaf Springs for Boat Trailer with Dual 2,000 lb Axles
    If your axles are 60 inches from hub face to hub face and 48 inches from center of spring to spring, then I recommend the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-ST-60-10 or the 4 bolt hub version # 20440I-ST-60. If you have longer axles with the hub face to hub face measuring 72 inches with spring centers at 58 inches, then you will want # 20440I-ST-72 for 4 bolt hubs. With any of these axles, I recommend the hardware # CE23000. I've...
    view full answer...
  • Should Mobile Home Axles Be Used On Utility Trailer?
    Mobile home axles like what you have on your utility trailer are designed for one time use and really should not be used on a utility trailer. Your best bet is to replace the axle with one built for a RV/Trailer. You will need to measure the hub face to hub face measurement of your current axle, the spring center to spring center measurement, and the weight capacity of the axle. For example the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-ST-60-10...
    view full answer...
    Image 1 for
  • Replacement Axle for Harbor Freight Utility Trailer
    Since you want to change your trailer hubs to the 5-on-4-1/2 bolt pattern I suggest you select a 60-inch axle kit that includes idler hubs, such as one of the two kits shown on the linked page. These two 2K-rated axle kits include 5-on-4-1/2 hubs, bearings, races, seals, lug nuts and bearing grease. Kit # 20545I-ST-60-10 works with 8- to 10-inch wheels and kit # 20545I-ST-60-15 works with wheels from 12- to 15-inches diameter. If you trailer's existing axle is installed below your leaf...
    view full answer...
  • How to Choose Replacement Axle
    Thank you for the photo and while there is a way to determine a replacement axle, unfortunately there is nothing on the damaged axle tag that can be used as a way to specifically find the correct one. In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need,...
    view full answer...
    Image 1 for Image 2 for
  • Replacing an Axle on a Narrow Trailer
    With the measurements you provided, unfortunately we will not have a through axle available for your trailer. However, we do have a Timbren Axle-Less System that may suite your needs. The # ASR2KHDS01 will not require spring seats and as long as the hub face measures 6 inches to the frame, it would be a great option. This does not come with hubs, though, so you would also need to get two of the Dexter Idler Hubs # 84545UC1-EZ.
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.