bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 3500 lbs
  4. 89 Inch Long
  5. 74 Inch
  6. 5 on 4-1/2
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Item # 35545E-ST-89
Our Price: $521.61
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 98 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs part number 35545E-ST-89 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (141)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles - 35545E-ST-89

  • 3500 lbs
  • 89 Inch Long
  • 74 Inch
  • 5 on 4-1/2
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • No Drop or Lift
  • Standard Spindles

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindle - no drop
    • Standard grease application
  • Spring seats and spindles are welded on
  • Electric brakes are easier to install - no actuator or hydraulic lines necessary
    • Mounting hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Bolt pattern: 5 on 4-1/2"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Brake flange configuration: 4 bolt
  • Grease cap: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 17-1/2"


Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Races
    • Inner race: L68111
    • Outer race: L44610
  • Seal: 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


T3584F-8974 Dexter Replacement Axle Beam - 89" Hub Face - 74" Spring Center - 3,500 lbs

23-26 Dexter 10" x 2-1/4" Left Hand Electric Brake Assembly

23-27 Dexter 10" x 2-1/4" Right Hand Electric Brake Assembly

84546UC3 Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2

457458 Loctite Viper Lube High Performace Synthetic Lubricant - 14.1 oz Can

6-17 Brake Mounting Nut

5-8 Brake Mounting Lockwasher





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs - 35545E-ST-89

Average Customer Rating:  4.7 out of 5 stars   (141 Customer Reviews)

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware.

by:

I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.

Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.




by:

Axle seem good. The directions for assembly are apparently a copy of a copy of a copy..... ect,making them pretty difficult to read. Difficult enough that I missed the part about how deep to tap in your inside seal. Now we get to do it again.




by:

Five stars because of Hally. She is the only person that knew her job that I spoke to. Axle and brakes are going fine on my trailer.




by:

Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.




by:

Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in order..it doesn’t get any easier..




by:

Excellent products would tell everyone to buy from etrailer




by:

Easy ordering, prompt delivery and great customer service. Highly recommend.




by:

Delivered ahead of schedule.
Very good
service.




by:

good axle, quick service. just what I needed




by:

Great axle, hardest part of install was measuring the pld axle. E-trailer does a great job with tutorials on all of the parts they sell.




by:

Excellent for all. Parts are great quality. Everything was shipped hassle free and quickly. The help videos are over the top. The only complaint I might have is that that marine grease sticks to everything (LOL). I really wish all internet sales services were as good.

Thank You




by:

On one of the braking hubs, there was a threaded stud missing. Otherwise, everything came as expected.




by:

Really great to work with!




by:

cannot beat the price




by:

All items arrived in a timely manner. Overall was a great experience from start to finish! Thanks!




by:

Nice




by:




by:




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I replaced my RV's axles from 4400# to this product. I am very pleased with the product including the shipping and the installation.


Comments
Very pleased. I feel my RV rides better with less sway. For the record, I also upgraded my leaf springs to to 7-leaf 3500# capacity each
Nick - 11/11/2022


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.


Comments
Axel has been great! Server long road trips has proven the product.
DaveW - 08/05/2021


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great axle kit, very easy install was able to swap this in the day it arrived to my home. One thing to recommend is buy new U bolts you will be glad you did




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I have been buying trailer parts from etrailer for years and have they never let me down! Great customer service!



25
141
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Finding Replacement Axle for 2001 Haulmark Trailer
    Unfortunately, trailer manufacturers don't often keep a good record of the parts they install at the factory. Because of this, your best option for locating the correct replacement axle for your Haulmark trailer is to simply take a few measurements on the existing unit and verify its weight rating. First you will want to measure from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle. This refers to the hub face measurement. Then measure from the...
    view full answer...
    Image 1 for
  • Where Should the Axles be Located on a Trailer for Proper Tongue Weight
    Yes, the general 60/40 rule does include the trailer tongue. We actually have a helpful article that goes into a little more detail which I have linked for you to check out. The attached picture appears in the article.
    view full answer...
    Image 1 for
  • Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
    You may be able to replace your existing axle that has an 84 inch hub face length with one that has an 89 inch hub face length without a problem but it's going to be dependent on your existing spring center length. This is the distance from the center of the spring seat on one side of the axle to the center of the seat on the other, which essentially gives you the width of your trailer. When picking out a replacement axle you want to try and match up the hub face lengths like you mentioned...
    view full answer...
    Image 1 for
  • Can 2014 Forest River XLR Hyper Lite Upgrade to 5,200 lb Axles
    You definitely can replace your 4,400 lb axles with 5,200 lb axles that use leaf springs like what you currently have. 5,200 lb axles are actually more common than 4,400 so this would not be a big deal at all. It's really just a matter of picking out the correct dimension axles. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine...
    view full answer...
    Image 1 for
  • What Info Is Needed to Pick Out Correct Size and Capacity Trailer Axles
    We don't carry every available axle from Dexter so most likely we don't have exactly what you'll need but I can help you figure out what you do need so that you can pick out the correct one. Basically you need to first verify the capacity you need and then the correct dimensions. The lengths you need to determine are the hub face to hub face dimension and the spring seat to spring seat center dimension. I attached a picture that shows this. If you find a local trailer shop who can order...
    view full answer...
    Image 1 for
  • Replacement Haulmark Trailer Axle Model TS5X8DS2
    I can help you find a replacement axle for your Haulmark trailer but unfortunately trailer manufacturers don't often keep a good record of the parts they install at the factory. Your best option for locating the correct replacement axle for your Haulmark trailer is to simply take a few measurements on the existing axle and verify its weight rating. I did research on the Haulmark TS5X8DS2 and the trailer has a loaded capacity of 2980 pounds from what I could find so you will probably need...
    view full answer...
    Image 1 for
  • Where to Measure 2015 R-Pod R178 to Pick Out Replacement Axles
    We can help you pick out the correct axle your trailer needs but we do not have access to the axle dimensions of your R-pod R178 so we can't tell you exactly what you'd need so what you'll need to do is measure your axles in a few places so you can figure out exactly what you'll need. I've attached a photo showing where to measure your axle for the correct length. I've also included a link to our axle product listings. Once you know your measurements, you can use the filters on the left...
    view full answer...
    Image 1 for
  • Can Spring Centers on 3,500 lb Dexter Axle be Changed to Match Lasalle Axle 537274
    While the leaf spring seats on the Dexter Trailer Axle # 35545E-ST-89 come already installed (and can't be ordered any other way), you can have a welder cut them off and weld them back on in the correct locations. This can be a little tricky though as it needs to be precise so you need to make sure whoever does this has experience with trailer axles. The only way to avoid this is to purchase an axle through a trailer shop or an axle company so everything can be custom-tailored to your...
    view full answer...
  • How to Determine Tire Placement in Regards to Fender for Replacement Axle
    If the hub-face to hub-face dimensions of an axle, like the 89" Dexter Trailer Axle w/ Electric Brakes # 35545E-ST-89, matches what you currently have and if your trailer wheel has a zero offset (which almost all of them do) then your tire will sit in the exact same location as what you currently have whether that's in the center of your fender or slightly offset to your fender.
    view full answer...
  • Does Adding a Second Axle to Trailer Increase Weight Carrying Capacity
    We do not offer torsion axles due to shipping size and weight restrictions. We do offer leaf spring beam axles up to a 3500-lb rating and we offer Timbren axle-less suspensions as well. If you want to add a second axle to an existing single-axle trailer you potentially can do so but there are a few things to keep in mind. Adding the second axle does NOT necessarily increase the trailer's weight-carrying capacity. This might be the case but only if the axles were the trailer's lowest-rated...
    view full answer...
  • Are Trailer Axles Directional, or Can Either Side Face Forward
    An axle without idler hubs would not have a left or right side assigned to it. It could basically be ran either direction. If it has brake assemblies installed though then it would need to face the right direction. Otherwise you'd have to swap the assemblies since the assemblies are directional. You'll notice on trailer axles too that there is a bow to them that faces down. This is so that when the weight of the trailer is put on them the flex in the axle is offset which allows the camber...
    view full answer...
  • How To Determine Trailer Axle Weight Capacity Rating
    There is not a number on brake assemblies that tell you what the axle is rated for, but there are ways to get an idea of the load rating. If you have the GVWR of your trailer, you can get a really quick idea of the axle rating based on that number and divide by the number of axles. The brake assemblies can help you narrow down the size possibilities. A 12 inch diameter brake assembly is typically for axles between 5200 and 7000 lbs. A 10 inch diameter is typically for a 3500 lb axle....
    view full answer...
  • Does Dexter Trailer Axle w/ Electric Brakes # 35545E-ST-89 Come with Lug Nuts
    Yes, the Dexter Trailer Axle w/ Electric Brakes # 35545E-ST-89 that you referenced does include lug nuts.
    view full answer...
  • How To Determine Axle Placement on a Single Axle Trailer
    The recommended placement of an axle on a single axle trailer will be determined by tongue weight. There are two formulas to determine axle placement. One formula is for trailers with a tongue weight (TW) greater than 10% of the gross trailer weight (GTW) and the other formula is for trailers with a TW less than 10% of the GTW. You can find each of these formulas pictured below. Before you can use either of these formulas you will need to have the axle already placed under the trailer....
    view full answer...
    Image 1 for
  • How to Know if Dexter Axle 35545E-ST-89 Will Fit 2008 KZ Coyote Rock Climber
    We don't carry every axle on the market, but what you can do is measure the distance from hub face to hub face on what you currently have and then measure the distance between the spring seats to see if the part # 35545E-ST-89 would work. It has a distance of 89 inches from hub face to hub face and 74 inches between spring seats on center. If you have different dimensions you would need to find a local trailer shop who can order you in custom axles to the specs you need.
    view full answer...
  • What is Included with the Dexter Trailer Axle # 35545E-ST-89
    The Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs, # 35545E-ST-89, is a complete axles with electric brake assemblies and brake drums that will have wheel bearings, seals, dust caps, and lug nuts. The electric brakes are activated through trailer wiring that is connected to your tow vehicle and powered by an electric brake controller that is located in the cab of the tow vehicle. Suspensions parts like leaf springs, and hangers, will also...
    view full answer...
  • What do the Hub Face and Spring Center Measurements Mean for an Axle
    If they were talking about the hub face and spring center measurements then what was referred to was the hub-face-to-hub-face and spring-center-to-spring-center lengths. Hub face is measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle. The spring center is the approximate width of your trailer. It is measured from the center of the spring seat on one side of axle to the center of the spring seat on the other side of the axle. The Dexter...
    view full answer...
    Image 1 for
  • Recommendation For Axle, Hub, and Brake Assembly For 2008 Jayco 1207
    Based on your information, it sounds like you want an entire kit including a new axle. We have several options available so we would need to confirm your 2008 Jayco 1207 axle weight rating and bolt pattern. This will be stamped on the axle or there will be a label. From my research, it looks like your Jayco probably has a standard 3,500-lb axle with a 5 on 4-1/2 bolt pattern that has a hub-face-to-hub-face length of 89 inches. If this sounds like a match then the Dexter Trailer Axle...
    view full answer...
    Image 1 for
  • What Information is Needed to Find a New Axle for Electric Brakes?
    Electric brakes are usable with a boat trailer, you would just need to unplug them before backing in the water. If you are looking for a new axle you would need to know the weight capacity of your current axle as well as the dimensions from hub face to hub face and spring center to spring center, as you can see in the accompanying photo. For example, Dexter Trailer Axle # 35545E-ST-89 comes with electric brakes installed, has a 3,500 lb weight capacity, measures 89" hub face to hub face,...
    view full answer...
    Image 1 for
  • Locating Dexter 3,500 Pound Axle to Replace Dexter 2,000 Pound Axle
    We do have a nice selection of Dexter 3,500 pound axles available but in order to determine if we have one that matches the length on your current 2,000 pound model you will need to take a couple measurements. Unfortunately the Dexter model information that you provided does not indicate its actual length or size. On your current axle you will first need to take a measurement from the base of one wheel stud to the base of the other wheel stud (Hub Face Length). Then measure from the center...
    view full answer...
    Image 1 for
  • How to Determine Axle Weight Rating on a 1983 24 Coachmen Travel Trailer
    I can help you determine the weight rating of the axles on your 1983 Coachmen travel trailer but there are a lot of models out there and since your trailer is a pretty old model it is very possible that someone could have changed out the axles and there is no way of knowing if they actually put exact replacements on it (unless a record was kept of course). To determine the immediate weight rating of your axles you can simply look at the GAWV (gross axle weight rating) which can be located...
    view full answer...
  • Selecting Replacement Axle for 1993 Aljo Model M-2000 Travel Trailer
    The 1993 Aljo model M-2000 travel trailer is a 20-foot tandem axle travel trailer with a specified weight of 3200-lbs, however I could not find confirmed axle specs for it during my research. Selecting a new axle for it, such as the Dexter Trailer Axle kit # 35545E-ST-89, just means matching up the weight rating and dimensions to the existing axles. Axles usually have a sticker or plate on them to indicate their weight ratings. The photo I linked for you shows the spacing between hub...
    view full answer...
    Image 1 for
  • How to Measure to Pick Out Replacement Axles for a Trailer
    You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well. I also attached a link to a page with all of the axles we carry.
    view full answer...
    Image 1 for
  • Locating Replacement Dexter P-15 Axle on Trailer
    The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the axle, this might be more helpful in determining the exact axle you have on your trailer. Otherwise, I recommend measuring the hub-face-to-hub-face length, along with the spring-center-to-spring-center length on your axle. Its weight capacity...
    view full answer...
    Image 1 for


< Previous
123. . .7



Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.