Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs
(98 reviews)
Price: $544.44
Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs
Item # 35545E-ST-EZ-89
Our Price: $544.44
This item qualifies for Free Shipping
In-stock alternatives that can ship today
- All Info
- Reviews (98)
- Q & A (291)
- Photos
- Why etrailer?
Dexter Axle Trailer Axles - 35545E-ST-EZ-89
- 3500 lbs
- 89 Inch Long
- Leaf Spring Suspension
- 5 on 4-1/2
- 74 Inch
- Electric Brakes
- Easy Lube Spindles
- Dexter Axle
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. EZ-Lube spindles for simple lubrication.
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs
- Low ride height makes it easier to load and unload your trailer
- Straight, EZ-Lube spindles - no drop
- Built-in grease zerks for simple lubrication
- Spring seats and spindles are welded on
- Electric brakes are easier to install - no actuator or hydraulic lines necessary
- Mounting bolts included
- Cast iron hubs and drums are sturdy and durable
- Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
- Limited 2-year warranty
Specs:
- Weight capacity: 3,500 lbs
- Hub-face-to-hub-face length: 89"
- Spring-center-to-spring-center length: 74"
- Flange-to-flange length: 82-5/8"
- Drum dimensions: 10" diameter x 2-1/4" wide
- Bolt pattern: 5 on 4-1/2"
- Tubing outer diameter: 2-3/8"
- Spindle size: 1-1/16"
- Brake flange configuration: 4 bolt
- Grease cap: 1.986"
- Wheel stud diameter: 1/2"
- Wheel size: 13" - 15"
Bearing, Race, and Seal Information
- Bearings
- Inner bearing: L68149
- Outer bearing: L44649
- Races
- Inner race: L68111
- Outer race: L44610
- Seal: 10-19
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
Dexter Axles
Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
T3584F-EZ-8974 Dexter Trailer Axle with EZ-Lube Spindles - 89" Long - 3,500 lbs
23-26 10" Electric Brake Assembly - Left Hand
23-27 10" Electric Brake Assembly - Right Hand
84546UC3-EZ Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 4-1/2 - E-Z Lube - Qty 2
L11402 LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge
6-17 Nut for Brake Mounting Bolt for 7" and 10" Brake Assemblies
5-8 Lockwasher for Brake Mounting Bolt for 7" and 10" Brake Assemblies
Customer Reviews
Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs - 35545E-ST-EZ-89
Average Customer Rating: 4.7 out of 5 stars (98 Customer Reviews)
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. EZ-Lube spindles for simple lubrication.
- 35545E-ST-EZ-89
Martin W - 01/24/2021
by: Martin01/23/2020
I purchased an axle from a farm store and it was cheap and cheap. This Dexter axle is American made and trailer makes it easy by delivering it to your door and providing step by step videos for installation! Save your self time and money and buy this axle from etrailer. Mine arrived in just two days! Always fast and reasonably priced!
Comments
Still an awesome axle! I haul a lot of heavy loads and this axle never shows any signs of stress. Bearings are still like new and the shaft housing is still rust free!
Martin W - 01/24/2021
- 35545E-ST-EZ-89
by: Gary S.08/26/2017
Installed a yr ago. Perfect product. One thing for me though.... I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider. So the original fender would have cut into the tires. I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.
- 35545E-ST-EZ-89
by: Andrew N.12/28/2014
I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.
- 35545E-ST-EZ-89
by: Keith08/12/2021
Very happy with all the items from etrailer. Every thing came as advertised. Great email tech support.
- 35545E-ST-EZ-89
by: James12/21/2018
Everything went together perfect. My trailer is strong and safe now. Glad I bought my replacement parts threw E-Trailer
- 35545E-ST-EZ-89
Patrick - 06/16/2019
by: Patrick06/16/2018
I needed to replace the axle on my 6.5 x 16 foot utility trailer, and since I tow a larger ATV and 500 lbs of other gear every day November to March, also needed brakes on this trailer. This kit was a good remedy for me. The videos on E Trailer are excellent, well produced, and allowed me to get the job done quickly.
Comments
A utility trailer worked daily from November to late March gets a lot of stress. So far, working out well. Thanks!
Patrick - 06/16/2019
- 35545E-ST-EZ-89
by: John05/31/2018
I bought 2 of these and one idler axle for a 30ft triple axle deck over trailer I was building for carrying a 4x4 truck and two quads. built using these as I wanted a true 7000 lb capacity trailer plus I didn't want to get into the big 8 lug axles. everything arrived in perfect condition, great prices, free shipping on orders over $99. Great company for delivery and back up. I ended up buying two braked axles, one idler, six modular silver wheels and radial tires. junction box RV plug, Hopkins breakaway switch etc. could not have built this trailer without etrailer.
- 35545E-ST-EZ-89
by: Jim S07/08/2017
The 14' dove tail trailer I built has worked well for everything except what it was built for. The 64 Ranchero pro gas car was put on the back burner so the trailer hauls lumber, carpet and whatever building materials I need. The trailer is over built for what I haul so I am relieved the brakes are not grabby and the suspension tracks true behind my truck. Best of all was the xlnt customer service when there was a small problem with my order. It was taken care of immediately ! I am the welder fabricator at my work and will continue to recommend E Trailer for anybody modifying, upgrading or replacing parts on their trailers.
- 35545E-ST-EZ-89
by: Euless12/28/2017
Due to adding weight to my 17' bass boat, it became too heavy to pull with my caravan without having trailer brakes. With Steve's help, he guided me thru everythi ng that I needed to replace the complete axle, including controller and all accessories. I had all the work done by others, and still ended up paying less than $1,000 for everything. Now, I am legal on the road and do not have to worry about my insurance not covering me if I am in an accident. Everything works smoothly and correctly. I will buy all my trailer parts from now on thru etrailer. Thanks Steve for a job well done
- 35545E-ST-EZ-89
by: Shawn05/15/2021
etrailer is AMAZING!!!!
- 35545E-ST-EZ-89
by: Chad03/30/2017
Recieved a complete axle including brakes and new lug nuts, easy swap out, I did not have to deal with the damaged bearing races or getting a spindle welded on old axle ( one of my guys towed trailer to the point it destroyed everything on one wheel). Called Stacy @etrailer to confirm shipping and stock, and it was delivered couple days later. Best part was I could have one of my guys install it because everything was new vs I would of had to deal with repairing the spindle.
- 35545E-ST-EZ-89
by: Andrew M.02/25/2016
This axle has been a great addition to my project utility trailer, but it is the best value you will find ANYWHERE for a 3500# electric braking axle with EZ-Lube hubs.
- 35545E-ST-EZ-89
by: John11/28/2018
Dealing with etrailer and Lisa D was a very nice experience, ordered 2 dexter axles set of springs for my tandem axle trailer. My order was placed on 11/23/18 and it arrived on 11/26/18 more then pleased with that something I also didn't know was etrailer does a 110% price match . Very happy with the products i received, the shipping time and the person I placed the order with Lisa D. Thanks again etrailer , and yes I would order from them again.
- 35545E-ST-EZ-89
Jim R - 06/05/2017
by: Jim R06/04/2016
EXACT replacement. Great quality, great shipping... A great value from an A++ company. Thanks to all of you. You all have bailed me out many times in time of need.
Comments
Working fine 1 year later
Jim R - 06/05/2017
- 35545E-ST-EZ-89
by: Robear03/15/2016
This axle was needed for a very special purpose and it now incorporated into a trailer for that use. I could have used an axle with half the rating but one was not available. The length was the primary reason for selecting this axle. This one will be fine and I'm happy with the unit.
- 35545E-ST-EZ-89
by: Richard03/04/2021
Exactly as I ordered. Bolted right on with ease
- 35545E-ST-EZ-89
by: Brad07/09/2019
Great "Live" person on phone, very helpful. Showed up on time. Went together quickly even without instructions with pictures, internet was down and could not look at how to videos. Never have I replaced an axel before but its not a big deal if you have the tools to get the job done. Very happy, save lots of $$$
- 35545E-ST-EZ-89
by: John07/06/2020
Products were fine but the shipping was awful. My order included 2 tubes of grease. Both tubes were thrown in to a larger box containing other boxes of smaller items. Both tubes were crushed and spilled their contents on to everything else in the box. What a mess!
- 35545E-ST-EZ-89
by: Bill C02/07/2016
Ordered a 3500 pound axle with breaks to replace a broken axle without breaks. Axle was delivered quickly and was easy to install using the video on the web site. Axle brakes also work great!
- 35545E-ST-EZ-89
by: Henry D.11/15/2015
I had a bent axle. I sent a e/mail out with all measurements on my axle and springs and asked what I needed. A service rep. got back to me with the part numbers I needed. I placed my order on a Wednesday and my was here on Friday. Unbelievable. Everything fit like a glove.
- 35545E-ST-EZ-89
by: Flint06/17/2019
I may have not read the fine print but the dexter axle comes disassembled like a "kit" I thought it was ready to go the rest of order was OK and the people at etrailer are always helpful
- 35545E-ST-EZ-89
Mike L - 03/04/2019
by: Mark03/03/2019
I have used Dexter Axles before . I greatly enjoy working with the Torflex style. That is what I thought that was what I was Ordering. The Torflex style IS the way to go!!
Comments
We do not bill this axle as being a Torflex axle. This axle is for a standard leaf spring suspension.
-- Mike L - 03/04/2019
- 35545E-ST-EZ-89
by: Aaron03/12/2021
Good prices and great customer service. Order arrived fast and was well packaged.
- 35545E-ST-EZ-89
by: Lloyd C.03/25/2016
Purchased this product as part of a total trailer upgrade. Excellent quality as are oll the other items I ordered and received. Can't beat the quality and price at eTrailer.
- 35545E-ST-EZ-89
by: Jason M.11/07/2016
Very great product. Excellent care in shipping!! They have great tips and instructions online that helped out as well. Certainly will buy from again. This review was written 1 year after our purchase and everything is still working well as expected.
27
105
Show More Reviews
Ask the Experts about this Dexter Axle Trailer Axles
- Replacement 3,500lb Dexter Axle For Diamond C 3RBT Utility TrailerBased on the information you gave me, the closest axle we have is the 3,500lb EZ-Lube Dexter axles which measure 74" from spring center to spring center and 89" from hub face to hub face. While you were looking for 88" hub face to face, this 89" shouldn't cause any issue and is likely the correct size axle that you were needing since 89" is extremely common. Either way, the 1" difference will not be a problem. For a complete axle and electric brake setup with 5 on 4-1/2 bolt pattern...
view full answer... - Spring Seat for 3500-lb Axle with 2-3/8-Inch DiameterIf you want to use an axle like # 35545E-ST-EZ-89 that has the 89-inch dimension and 3500-lb weight capacity you need but the spring seats are not at the correct locations you can just have new seats welded on. This axle's diameter is 2-3/8-inches so you can use spring seat # TRSS238. These seats are compatible with 1-3/4-inch wide or 2-inch wide leaf springs.
view full answer... - Will the Dexter 3,500 Axle Work With 74-1/2" Spring Center SpacingThe spring centers for an axle are measured from the center hole to the center hole. The good news is that if yours does not match up with one of the more common measurements like 74"; they can be cut, moved, and re-welded. We don't offer custom axles so the Dexter Trailer Axle part # 35545E-ST-EZ-89 is our best option.
view full answer... - Upgrading a Dexter Torsion Axle to a Heavier Duty OptionWe would definitely be able to upgrade to a higher capacity Leaf Spring or Silent Ride set up. That being said, we do not carry torsion axles, so we do not have a bolt on upgrade available. The axle # 8327820-EB would upgrade you to 5,200 pounds per axle, but with the spring seats being 74 inches from center to center, it is pretty specific as to what it fits. As you do not have any spring seats on your current axle, you would need to measure from center of your frame to the center of...
view full answer... - Spring Seat Spacing on Dexter 7K Axle 8327864-EBAxle spring seats will be welded in place using a jig so that their positions are pretty much exact. Our 7K axles with the 94-inch hub-face-to-hub-face dimension, shown on the linked page, have spring seats at two slightly different distances, 78-1/4-inches and 79-inches. Dexter axle kit # 8327864-EB does indeed have spring seats placed apart at 79-inches on centers.
view full answer... - How to Determine Correct Replacement Trailer Axle for 1993 Innsbruck by GulfstreamTo choose the correct replacement axle you can measure the one currently on your trailer from hub face to hub face and spring center to spring center. The # 35545E-ST-EZ-89 has a hub face measurement of 89 inches and a spring center measurement of 74 inches. It's also a 3,500 pound axle which you'll want to verify on yours as well.
view full answer...![Image 1 for]()
- Can Spring Seats on Dexter 3500 lb Axle 35545E-ST-EZ-89 Be RelocatedThe Dexter # 35545E-ST-EZ-89 axle would work very well for you, as it's definitely the closest to what you currently have. Once the existing spring seats were removed, they'd likely be pretty messed up. You'd be better off simply purchasing new ones, part # TRSS238 and welding them into place where needed. You could go larger in weight capacity, up to a 5200 lb axle like # 8327820-EB, but if your current axles are 3.5K apiece, increasing the capacity of the axles won't increase the trailer's...
view full answer... - What Info Is Needed to Pick Out Correct Size and Capacity Trailer AxlesWe don't carry every available axle from Dexter so most likely we don't have exactly what you'll need but I can help you figure out what you do need so that you can pick out the correct one. Basically you need to first verify the capacity you need and then the correct dimensions. The lengths you need to determine are the hub face to hub face dimension and the spring seat to spring seat center dimension. I attached a picture that shows this. If you find a local trailer shop who can...
view full answer...![Image 1 for]()
- Availability of Trailer Axle Kit with 93-Inch Axle, Brakes and Hub/DrumsDue to shipping size and weight restrictions we cannot ship axles over 89-inches overall length. You'll need to source your beam axle from a local trailer supply shop who can order one for you with the required length, spring seat dimensions and weight rating for your application. There is an alternative, however. We do offer universal-fit axle-less systems from Timbren that are rated up to 7000-lbs and these can be seen on the linked page. Some of these are available with electric brakes...
view full answer... - How to Measure to Calculate Placement of Torsion AxleI understand how it would be unclear which measurement to use since the center of the axle is not the same as the center of the wheel on a torsion axle. For a single axle trailer, measure from the center of the spindle (center of wheel) to the trailer tongue. The position of the wheel center relative to the center of gravity will determine the final axle loading as well as the hitch load. This applies for both leaf spring axles, like # 35545E-ST-EZ-89 as well as torsion axles, like yours. ...
view full answer...![Image 1 for]()
![Image 2 for]()
- How to Measure Hub Face of Mobile Home Hub and DrumBy "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles # 8-174-5UC3. To measure your axle from hub face to hub face with this (or any other axle) you will measure from the base of the hub on one wheel stud to the base of the wheel stud on the opposite hub.
view full answer...![Image 1 for]()
- How to Determine Trailer Axle CapacityThe trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can also tell the weight capacity of the axle by measuring the diameter of the axle. Here is a list that will show the axle weight capacity based on the axle diameter: Typical Axle Diameters Based on Axle Capacity - 1,000-lb - 2,000-lb Axles:...
view full answer... - Axle-Less Recommendation For Trailer With 72 Inch Frame WidthAll of the 3,500 lb axles like part # 35545E-ST-EZ-89 we offer have the center to center spring seats at 74 inches. We do not offer an axle with the seats placed at 72 inches as you mentioned. An option you may want to take a look at is to weld new spring seats like part # TRSS238, onto the new axles. You should make sure this is done by a certified welder. Another option you may wish to consider is the axle-less system like part # A35RD545E. This system will attach to any frame...
view full answer... - Replacement Haulmark Trailer Axle Model TS5X8DS2I can help you find a replacement axle for your Haulmark trailer but unfortunately trailer manufacturers don't often keep a good record of the parts they install at the factory. Your best option for locating the correct replacement axle for your Haulmark trailer is to simply take a few measurements on the existing axle and verify its weight rating. I did research on the Haulmark TS5X8DS2 and the trailer has a loaded capacity of 2980 pounds from what I could find so you will probably need...
view full answer...![Image 1 for]()
- Replacing Axles to Add Electric Brakes on 2008 Weekend Warrior CR3905Since you're looking at replacing the axles on the trailer, the easiest solution will be to order axles that already have electric brakes on them, or are at least already set up for electric brakes. There are a couple of things you will want to consider when ordering new axles. Hub face to hub face measurement Spring center to spring center measurement Axle capacity Wheel bolt pattern. I've attached a diagram showing you where to measure for the hub face and spring center measurements....
view full answer...![Image 1 for]()
- How to Add Electric Drum Brakes to a 2017 Covered Wagon 6x12 Single Axle Enclosed TrailerI would love to help you add electric drum brakes to your 2017 Covered Wagon 6x12 Single Axle Enclosed Trailer. In order to make sure you get the correct parts, I would need to know the serial number on your axle. In order to obtain this you would need to crawl underneath and look for a white tag on the center of the axle and locate usually a "SN #". Once you can provide this to me I would then be able to verify all the parts you need. I also recommend taking a look at the help article...
view full answer... - Are There Brakes Available for Dexter 8-283 Hub and Drum?The Dexter 8-283 hub and drum assembly you have is now obsolete and there is not going to be a way for you to add electric brakes without a brake mounting flange on your axle behind the hub. There are not going to be compatible brake assemblies for a 10-1/2" drum without a mounting flange. I strongly recommend you replace your axle so you can safely use your trailer. To do this you will need to know the correct weight rating for your axle and the dimension from hub face to hub face and...
view full answer...![Image 1 for]()
![Image 2 for]()
- Over-Under Axle Conversion Kit for 7,000 lb Mobile Home AxleThe Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 is compatible with most 7k trailer axles. It is designed for 3 inch diameter axles which are standard 7k trailer axle specs but mobile home axles can be different. If your motorhome axle is this diameter, you will be all set. If your axle has a larger diameter, then you will need to weld new spring seats to the top of the axle. For instance you would use # TRSS350 for a 3-1/2 inch diameter axle which is the next standard size.
view full answer... - Why Is It a Good Idea to Have Trailer Axle Label Face Rear of TrailerTrailer axles like the Dexter Trailer Axle # 35545E-ST-EZ-89 you referenced aren't necessarily directional, but since the label on the axle has a lot of really important info it's best to have it on the backside of the axle so that debris on the highway would be less likely to damage it and make it unreadable.
view full answer... - Locating Replacement Dexter P-15 Axle on Trailer The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the axle, this might be more helpful in determining the exact axle you have on your trailer. Otherwise, I recommend measuring the hub-face-to-hub-face length, along with the spring-center-to-spring-center length on your axle. Its weight capacity...
view full answer...![Image 1 for]()
- Recommended Dexter Axle To Replace Lippert AxleTo replace your Lippert axle, we have the Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs # 35545E-ST-EZ-89 or the Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # 35545I-EZ-89. Both of these axles have the spring center to spring center measurement of 74 inches and the hub face to hub face measurement of 89 inches. Unfortunately I can't look up your serial number for all the specs, so this recommendation...
view full answer...![Image 1 for]()
- Recommended 7,000 lb Axle with Brakes for M105 Military TrailerTo replace the axles on your M105 Trailer, you will need to know what dimension is the better fit. We have 7,000 lbs axle with electric brakes and drum assemblies that are 95 inches from hub face to hub face with 80 inch on center spring seats or 94 inch with 79 inch centers. We also have straight no drop or 4 inch drop axles. Here are your options: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" # 8327834-EB Dexter Trailer Axle w/ Electric Brakes...
view full answer...![Image 1 for]()
- How To Choose the Correct Replacement Dexter 3,500 Lb AxleIt sounds like you might be looking for a replacement Dexter 3,500 lb and if that is the case we have a few options. These options will vary based on the spring center and hub face measurements. The two options we offer which come with hub/drums and braking assemblies are the part # 35545E-ST-EZ-89 which has an 89" hub face and 74" spring center and the part # 7359765-EB which has a 95" hub face and 80" spring center.
view full answer... - Measuring for Replacement Axles, Bearings, and Leaf Springs for 1976 Dilly Boat Trailer I do not have any exact sizes on the parts used for the Dilly trailer, but fortunately all it takes to figure out the correct parts is a bit of measuring. If you would like to send me the following information, I'll be happy to recommend an axle and bearings for you: -The inner and outer wheel bearings -The hub face to hub face dimension -The distance between the spring seats, measured center hole to center hole -Axle capacity I've attached an image showing how to measure...
view full answer...![Image 1 for]()
![Image 2 for]()
![Image 3 for]()
- Replacing a Lippert 3,500 lb Leaf Spring Axle with a Dexter 3,500 lb Leaf Spring AxleThe Dexter Trailer Axle, part # 35545E-ST-EZ-89, is similar to the Lippert LC135-SB-85.0-68.5 axle, but it is not a direct replacement. Both axles are 3,500 lb leaf spring tubular axles, but they are different lengths. The Dexter axle is slightly longer, which means the wheels would stick out further and the spring center is wider. Your axle has a hub face measurement of 85 inches and the Dexter axle has a hub face measurement of 89 inches (see photo). The wheels will stick out about 2...
view full answer...![Image 1 for]()
- Troubleshooting Axle Alignment Issue on Tandem Axle EZ Loader TrailerIt sounds like you may have a replacement axle that wasn't fitted properly. You will want to make sure you have matching axles as that natural misalignment will cause tire wear issues and can lead to sway issues as well. I've linked the page to all of our axle options to assist. You will want to measure from hub face to hub face on each axle and from spring seat to spring seat center to determine the correct fit. I've linked the page to the options for replacement. You will also want...
view full answer...![Image 1 for]()
Do you have a question about this Trailer Axle?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer axles for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer axle information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Mike S
Video Edited:
Dustin K
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.