Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs
(150 reviews)
Price: $908.22
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs
Item # 6340624-EB
Our Price: $908.22
This item qualifies for Free Shipping
In-stock alternatives that can ship today
- All Info
- Reviews (150)
- Q & A (0)
- Photos
- Why etrailer?
Dexter Trailer Axles - 6340624-EB
- 5200 lbs
- 95 Inch Long
- 80 Inch
- 6 on 5-1/2
- Leaf Spring Suspension
- Electric Brakes
- No Drop or Lift
- Dexter
- Easy Lube Spindles
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs
- Low ride height makes it easier to load and unload your trailer
- Straight, E-Z Lube spindles - no drop
- Built-in grease zerks for simple lubrication
- Spring seats and spindles are welded on
- Electric brakes are easy to install - no actuator or hydraulic lines necessary
- Adjuster plugs, mounting bolts, and hardware included
- Cast iron hubs and drums are sturdy and durable
- Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
- Made in the USA
Specs:
- Weight capacity: 5,200 lbs
- Hub-face-to-hub-face length: 95"
- Spring-center-to-spring-center length: 80"
- Drum dimensions: 12" diameter x 2" wide
- Bolt pattern: 6 on 5-1/2"
- Brake flange configuration: 5 bolt
- Axle tubing outer diameter: 3"
- Grease cap outer diameter: 2.44"
- Wheel stud diameter: 1/2"
- Wheel size: 14-1/2" - 16"
- Limited 5-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: LM67048 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: LM67010
- Grease seal (included): RG06-070
- Inner diameter: 2.250"
- Outer diameter: 3.376"
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
E-Z Lube Spindles Make Lubrication Simple
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
6340624 Dexter Trailer Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 5,200 lbs
23-106 (K23-106-00) Dexter 12" Electric Brake Assembly, RH - 6,000 lbs
23-105 (K23-105-00) Dexter 12" Electric Brake Assembly, LH - 6,000 lbs
457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge
7-5 (191000) Redline Brake Mounting Bolt
8-201-5UC3-EZ (K08-201-94) Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube
RG06-070 Grease Seals 10-36 (pair)
Customer Reviews
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs - 6340624-EB
Average Customer Rating: 4.7 out of 5 stars (150 Customer Reviews)
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.by: VICTOR Briley10/09/2019
Everything as it should be.
by: Bill 09/26/2019
very fast shipping, very easy too order what you need, reasonable prices. I'm a repeat customer and will continue too be.
by: Garrett 09/15/2022
by: Corey 07/25/2022
by: Pete 12/19/2021
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.
Comments
I finally got to finish the trailer in the spring of 2022 and install these axels and brakes. Perfect fit and Im very happy with the results.
Pete - 02/06/2023by: Bill09/17/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.
by: Kenneth G02/24/2023
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Easy install quality product
by: Larry 12/14/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
The product is all I could have asked for. The package was complete in that all fasteners, were included along with the proper lubrication. Each item was made/machined well and went together without any problem. After the first year no problems, all bolts, nuts, and fittings are tight and working well. If need be I will buy from E-Trailor again.
by: Ian07/26/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!
by: DaveW08/03/2020
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.
Comments
Axel has been great! Server long road trips has proven the product.
DaveW - 08/05/2021by: Nick 11/10/2021
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I replaced my RV's axles from 4400# to this product. I am very pleased with the product including the shipping and the installation.
Comments
Very pleased. I feel my RV rides better with less sway. For the record, I also upgraded my leaf springs to to 7-leaf 3500# capacity each
Nick - 11/11/2022by: James 10/13/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Great axle kit, very easy install was able to swap this in the day it arrived to my home. One thing to recommend is buy new U bolts you will be glad you did
by: Joe06/21/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.
Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.
by: Gary S.08/26/2017
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Installed a yr ago. Perfect product.
One thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.
by: Mike 10/21/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I have been buying trailer parts from etrailer for years and have they never let me down! Great customer service!
by: JDF05/11/2019
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.
by: Andrew N.12/28/2014
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.
by: William 09/17/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Axle seem good. The directions for assembly are apparently a copy of a copy of a copy..... ect,making them pretty difficult to read. Difficult enough that I missed the part about how deep to tap in your inside seal. Now we get to do it again.
by: Jimmy05/24/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
So far so good! Axle was not a direct fit even though it was supposed to be. We had to relocate a couple of the mounts for suspension. Other than the trailer rides great, better than ever.
by: John 08/13/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Five stars because of Hally. She is the only person that knew her job that I spoke to. Axle and brakes are going fine on my trailer.
by: Mark 03/23/2023
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Great service and product!
by: Brent 02/28/2023
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Great product, is working just fine.
by: Pat M05/09/2019
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
I can not say enough about how good your product is! The installation went very smooth.
I would highly recommend your product.
It was great to see that everything comes with it right down to the grease.
Comments
Great took the trailer to AZ this last year no problems.
James - 05/15/2020by: James 03/25/2023
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Fast shipping and excellent tracking!
by: Joseph06/21/2022
Review from a similar EZ Lube Axle w Brakes in Trailer Axles
Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in order..it doesn’t get any easier..
25
149
Show More Reviews
See what our Experts say about this Dexter Trailer Axles
- Recommended 5,200 lb. Axle for 5th Wheel RVI do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we will need to identify what axles you have installed outside of just the weight rating. I have linked a couple help articles that walk through how to determine the hub face measurement, spring centers and important points to best identify a replacement length. For a 5,200 lb. axle, I prefer the Dexter Trailer Axles with E-Z Lube spindles that come complete with electric brake assemblies,...
view full answer... - Info Needed for Work and Play, Forest River Toy Hauler Axle Upgrade to Higher CapacityFrom the info you listed your current axle seems to be a 4,400 lb axle with 95 inches from hub face to hub face but what I am unable to totally be sure on is the distance between the spring seat centers which is important for picking out an axle that will bolt up properly. The part # 6340624-EB that you referenced matches the overall length and is a higher capacity at 5,200 lbs but it has a spring seat to seat dimension of 80 inches which you would need to measure on your axle to be sure...
view full answer... - Weight of Dexter # 6340624-EB Trailer AxleThe Dexter Axle # 6340624-EB weighs right at 145 lbs. This includes the hub/drums, brake assemblies, bearings, races, seals, grease caps and lug nuts.
view full answer... - Comparing LT Tires to ST Tires for Car Hauler TrailerLT tires are made differently from the ST tires. The ST tires have a stronger sidewall by design from the Light Truck tires. The Light Truck (LT) tires are normally better for steering and comfort, but on a trailer the Special Trailer (ST tires) will be a better choice as you don't need the flexibility for turning with the non-moving axle. Motorhomes usually use the LT tires for ride comfort, but when you have a trailer the ST tires are a better choice in most cases. The biggest differentiating...
view full answer... - Do You Have to Get New Hubs/Drums and Brakes When Upgrading from a 3,500 to 5,200 Lb AxleIn order to upgrade from a 3,500 lb to a 5,200 lb axle you'll need to obtain new hubs/drums and braking assemblies as the bearings and brake mounting flanges are different. In order to choose the correct replacement axle for a trailer you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have...
view full answer... - How Much Does a Complete Dexter 5,200 Lb Axle WeightThe Dexter Trailer Axle with Electric Brakes part # 6340624-EB for example is a 5,200 lb axle assembly which comes complete with braking assemblies and hubs/drums, weighs around 150 lbs. The length of the axle would also play a factor in its weight as they can come in a few different lengths.
view full answer... - Can Tandem Axle Trailer Have Two Different Weight Capacity AxlesIt sounds like you are making or rebuilding a trailer. It's a good idea to have both axles rated the same on a tandem axle trailer. Together the 5,200 lbs Dexter Trailer Axle # 6340624-EB and 3,500 lbs Dexter Trailer Axle # 7359765-EB would be 8,700 lbs, however depending on how your trailer was loaded and the position of each axle it may not be able to handle the weight. Not to mention the bolt pattern is different, so different wheels and tires would need to be used for each axle. Keeping...
view full answer...
- How To Upgrade to a 5,200 Lb Axles On a TrailerIn order to find the correct replacement axle you have a few options. The first option would be to simply measure the axle you have now and record both the spring center and hub face measurements. The other option would be to look at the axle tag and read the hub face (HF) and spring center (SC) measurements off of this as it should be listed for you here using these aberrations. The final option would be to record the serial number and get in contact with the axle manufacturer. I would...
view full answer... - AL/KO 5200 lb Axle ReplacementWe offer some Dexter axles that might be a good replacement. You'll need to measure the hub face to hub face and spring seat to spring seat dimension of your current axle to see if what we offer is compatible. I've provided a diagram showing how to take that measurement. All the axles I'm showing you use spindles compatible with 25580 inner/LM67048 outer wheel bearings. For a 95 inch hub face and 80 inch spring center, use # 6340624-EB which includes hub/drums with 6 lug on a 5-1/2 inch...
view full answer...
- Spring Seat to Attach On Opposite Side of Trailer Axle # 6340624-EBWe don't have a version of the axle part # 6340624-EB that has the spring seats on the opposite side but you can weld a set on the other side with an additional set of seats with part # TRSS300.
view full answer... - 5200 lb Trailer Axle With 70 Inch Spring CentersAlthough we don't offer a 5000 lb axle, we do offer 5200 lb axles that might work for you, depending on the hub face to hub face dimension you're needing. We offer Dexter axles with an 86-1/2 inch hub face to hub face dimension and 71-1/2 center to center spring seat spacing that could work for you, but you'd need to remove the existing spring seats and tack new ones in place using part # TRSS300 at a 70 inch center. If an 86-1/2 inch hub face would work for you, we offer the following: •...
view full answer... - Parts Needed To Replace 3,500 Lb with 5,200 Lb Trailer AxlesYes, you can replace the 3,500 lb Dexter Axles with 5,200 lb Dexter Axles by simply swapping out the old for the new. That said, you will need new u-bolts as the axle will be larger in diameter (2-3/8" vs. 3"). The bolt pattern will also change from a 5 on 4-1/2" to a 6 on 5-1/2" so you will need new wheels/tires as well. Therefore, you will need new axle tubes, u-bolts, and wheels/tires in order to make the swap but these are all bolt-on parts. For the axles you just need to measure...
view full answer... - Replacement Axle Options For Trailer That Uses Obsolete 22834 Hub With Bearings 2788 & 1779I have some replacement options as the Hub 22834 that uses the Inner Bearing # 2788 and Outer Bearing # 1779 is obsolete. 86-1/2" Hub Face Dexter Trailer Axle w/ Electric Brakes # 8327816-EB 89" Hub Face Dexter Trailer Axle w/ Electric Brakes # 8327820-EB 95" Hub Face Dexter Trailer Axle w/ Electric Brakes # 6340624-EB All these axles will come complete with brakes and hubs.
view full answer... - Can 3,500 lb Axle of Trailer Be Upgraded to 5,200 lb AxleIt's definitely possible to upgrade a trailer's axle rating to a higher rating by just swapping the axles. To pick out the correct axle you'll need to measure the distance between the hub faces and the spring seat centers and you'll know which will fit as a replacement. For example we have the # 6340624-EB which has a distance of 95 inches from face to face and 80 inches between the spring seats. Then for a wheel and tire that would fit that axle we have the part # TA59VR which would fit...
view full answer... - 5,200LB Trailer Axles For a Tandem Axle Car Hauler 80" Spring Center and 95" Hub FaceYou will need the Dexter Trailer Axle # 6340624 and the Dexter Trailer Axle w/ Electric Brakes # 6340624-EB. These are 5,200lb axles with the one having a plain spindle and the other outfitted with electric drum brakes and a 6 on 5-1/2" bolt pattern. Do be sure to verify the local laws in your area for trailer brakes as most now require both axles to be braking axles on trailers over a certain weight. Otherwise we do offer the Dexter Trailer Idler Hub Assembly # 8-213-5UC1-EZ which you...
view full answer... - Upgrading Underrated Axles on 31-4BH Coleman Lantern Travel TrailerIf I'm reading you correctly, your travel trailer has a GVWR of 10K, but has two 3500 axles? If that's the case, your axles are horrifically overloaded and should be upgraded. Installing 12 inch brake assemblies (which likely wouldn't work because the available 12 inch drums would use a different bearing set than a 3500 lb axle) would provide better braking, but wouldn't fix the fact that the axles are underrated. Your best course of action would be to replace your current axles with 5200...
view full answer... - LIft Kit that Fits Dexter Torsion 3,000 lb Trailer AxleWe don't have any torsion axles but sometimes you can go with a different angle torsion axle to gain more height. A common change is to go from a 10 degree down to a 45 degree down to gain a couple inches. What brand axles do you have? We may also have a lift kit as well.
view full answer... - Will Leaf Spring for 5,000-lb Trailer Axles Work w/ 5,200 lb Dexter Axle on 7,000 lb GVWR TrailerThe most important measurement for replacing double-eye leaf springs is the center-eye to center-eye measurement, and if the 25-1/4" measurement of the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long # e44SR is what you need (which is what it sounds like), then you can go with it. The fact that it is rated for 5,000 lbs won't come into play in regards to matching the 5,200 lb rating of the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern #...
view full answer... - Do the 5,200 Lb Dexter Trailer Axles Come With Leaf SpringsI do have the correct leaf springs that you will need to use with the Dexter Trailer Axle w/ Electric Brakes part # 6340624-EB but these are not included. If you can provide me with your leaf spring hanger spacing then I can get you the correct leaf springs and equalizers if the ones you have now will not work. That said, most trailers will have a 29-1/2" leaf spring hanger spacing and if that is the case you can use the 5-Leaf Double-Eye Spring part # e34SR with the Curved Equalizer...
view full answer...
- Replacing Existing 3500 lb Axle With a 5200 lb AxleWhen replacing a trailer axle, the spring seat spacing isn't super-critical because you can always relocate those by obtaining new spring seats and having them tacked into place where you need them. The hub face to hub face distance is what's critical. What's the hub face dimension of your current axles? We offer 5.2K axles in the 3 most popular lengths (hub face to hub face) of 86-1/2 inches, 89 inches or 95 inches. • 86-1/2 inch E-Z Lube axle, part # 8327816 for the axle only or # 8327816-EB...
view full answer...
- Hubs and Bearings Used in 5200-lb AxlesThe hubs from your 3500-lb axles could theoretically be re-used on a different axle IF both axles have the same spindles that use the same bearings, but this is unlikely. Typically 3500-lb axles accept hubs that use bearings # L68149 and # L44649 while 5200-lb axles most often use bearings # 25580 and # LM67048. Even if it were the case that the two axles used the same spindles (again, very unlikely) then using the 3500-lb hubs on the 5200-lb axle would mean you gained no weight capacity...
view full answer... - 2008 Jayco Baja 10Y With D52 Axle, Rebuild or ReplaceIt appears you have a Dexter D52 axle, this is a 5,200 lb. axle with a 6 on 5-1/2 Bolt Pattern The correct braking assemblies and hubs/drums for a Dexter D52 Axle are, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459 and the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ (2.125" seal part # GS-2125DL) or part # K08-201-98 (2.250" seal part # RG06-070). The best way to find out which seal you need is to measure what you have now or just buy the extra seals. The...
view full answer...
- Replacement Brake Assemblies for AL-KO T-44 AxlesI have a solution for you, but the AL-KO T-44 axle has been discontinued since Dexter bought them out and there are no longer parts available for them, so you would need to completely replace the axles in order to replace the brakes. To choose the correct replacement axle you will need to know the hub face to hub face measurement and spring seat center to spring seat center measurements of your current axle; you'll also want to try to match your existing bolt pattern with the hubs in...
view full answer... - Parts Needed To Mount 5,200LB Tandem Axles To a Homemade Car Hauler TrailerTo attach your axles to the the frame of the car hauler you will need the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes all the hangers, equalizers, shackle straps, shackle bolts and nuts to fit your axles. I have linked an article below that will help you with positioning the axles on your trailer to ensure that you have the correct percentage of tongue weight when towing to be safe. If you would prefer to have an upgraded suspension the Dexter...
view full answer...
Do you have a question about this Trailer Axle?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer axle information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Matthew E
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.