Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. This axle is also built with drop spindles, which will lower the ride height of your trailer to allow for easier loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Average Customer Rating: 4.8 out of 5 stars (371 Customer Reviews)
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).I received the items in a very timely fashion and in great shape. I torched off the old U bolts and removed the axle. I removed the new spring seats using a cut off wheel in my grinder and moved them inward one inch on each side, then MIG weld the new ones on they lined up perfectly to the old ones. I then installed the new U bolt kit and torqued them down to 65 foot lbs. The old bearings were only one year old and reused them after cleaning. I installed new seals at this time. The brake pads were same age as bearings showing little wear. The old axles were not Dexter axles and rusted from the inside out then broke off by the drop.. I replaced both. Was a pleasant experience and would do it all over again.
I build custom trailers. I have been doing so for 50+ years. etrailer has consistently been the second cheapest supplier of axles, springs, hangers, hubs, and etc. that we have been able to locate. When you see the difference in quality that etrailer has you'll be buying the second cheapest too! These guys only offer one kind of quality - the EXCELLENT kind. Of the 8 or so trailers that I have in the road 24/7; 100% of them were made from etrailer components! Highly recommended!
showed up promptly was exactly what i n eeded
had to adjust bracket due to custom trailer. It worked out well
Nice Quality axle. Protected spindles for shipment. Nicely done.
Great price, super easy website, product shipped same day and delivered 2 business days later. Try to be that in 2020.
Great service. Tracking info. Is second to none. Very fast shipping. Great communication.
It got here sooner then expected. Great communication from the organization and great price.
Great response and fast turn around.
Review from a similar EZ Lube Axle in Trailer Axles
With Alex's assistance and knowledge of my trailer requirements, I installed two 3500 lb axles. These axles are superior to any others that I was shopping for, and with a combined GVW of 7,000 lbs my trailer is now suited for any medium sized load.
Review from a similar EZ Lube Axle in Trailer Axles
Adam was extremely helpful! After searching long and hard, the closest I could find was this axle of 80” spring centers. Mine were only 76” so Adam set me up with a pair of spring seats so I could carefully cut of the factory ones, grind smooth and weld the new seats at the 76” I needed to fit my trailer. After repainting, it looked like factory again. All others parts, brake assemblies, and drum/hub assemblies with bearings fit perfect!
Review from a similar EZ Lube Axle in Trailer Axles
Trying to update my trailers 5100 lb. Lippert axles with Dexter 6000 lb. axles. Dexter’s are very well made wished I didn’t have to send them back thus why the 4 stars. Dexters 74 inch center to center are not a direct replacement for Lippert. It’s very hard to get the hub face measurements by yourself so I assumed it would work unfortunately Lipperts are few inches wider. Customer service was great about letting me ship these items back. Great folks to deal with!
Review from a similar EZ Lube Axle in Trailer Axles
Great customer service and great delivery times. Even with the current shipping delays parts stock is good. We have been using etrailer.com for years for small trailer parts with no issues at all.
Review from a similar EZ Lube Axle in Trailer Axles
One word, FANTASTIC! The #5200lbs Dexter axle was a perfect fit period! The axle came with all factory stickers and serial numbers to further identify the correct part. Shipped in a good time given that the part wasn’t in stock but the wait was worth while. The price and free shipping where the deciding, the perfect fit was very gratifying as well I highly recommend etrailer.com
Review from a similar EZ Lube Axle in Trailer Axles
Easy peazy, I've purchased two of these. Sure beats driving all over to find the right axle. Arrived timely and installed easily. Big trip next week so they will get the test, but dexter axels have great reliability.
Review from a similar EZ Lube Axle in Trailer Axles
After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through) After checking my local source, I was told there was a long lead time for new axles due to the pandemic. I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts. Everything arrived ahead of schedule, allowing me to get back up and running quickly. Thank you etrailer. You are a valuable resource.
Review from a similar EZ Lube Axle in Trailer Axles
Came in bent
Review from a similar EZ Lube Axle in Trailer Axles
Has been used on a trailer to haul a cat 279 skid loader. So far I haven't had any problems and it seems to be a good buy.
Review from a similar EZ Lube Axle in Trailer Axles
etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.
Review from a similar EZ Lube Axle in Trailer Axles
Specs. matched exact to the broken axle and was easy to install. I was surprised that the axle was pre-wired although it was not replacement of the brake axle on my trailer. Hub fit nicely and trailer is now ready for the next haul job. Delivery was as promised.
Do you have a question about this Trailer Axle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.