1. Trailer Axles
  2. Dexter Axle
  3. 7000 lbs
  4. 95 Inch Long
  5. Leaf Spring Suspension
  6. Spindles Only
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs

Item # 8327834
lowest price pledge
Our Price: $395.73
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 59 lbs
Quantity: 
In Stock
Trailer Axles 8327834 - 7000 lbs - Dexter Axle
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs part number 8327834 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (333)
  • Q & A (32)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 8327834

  • 7000 lbs
  • 95 Inch Long
  • Leaf Spring Suspension
  • Spindles Only
  • 80 Inch
  • No Hubs
  • Easy Lube Spindles
  • Dexter Axle

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: 14125A
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



8327834 Dexter Replacement Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 7,000 lbs






Customer Reviews

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs - 8327834

Average Customer Rating:  4.8 out of 5 stars   (333 Customer Reviews)

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

- 8327834
by:

Great customer service and great delivery times. Even with the current shipping delays parts stock is good. We have been using etrailer.com for years for small trailer parts with no issues at all.



- 8327834
by:

Works as promised. My only complaint is that one of the cages that holds the nut from backing off was lost in shipping, you could see that the axle had been dragged by one end. The spindle was not drilled for a cotter pin and I was in a hurry so ran to the local auto parts store and got a cage rather than even mentioning it.



- 8327834
by:

Just installed my axle but have not driven the trailer yet. I will say etrailers had great customer service and had my axle in less than a week.



- 8327834
by:

Dexter axles always perform well. This is a replacement for an axle that was bent. Turned very tight in a parking lot, dragging the front axle side ways. The tire dropped in a pot hole and got wedged so hard it bent axle and broke U bolts. The trailer had 4 years of hard daily use before that. I'm sure the replacement will work well for many years as well, as long as I don't tear it up.



- 8327834
by:

The prices were great, delivery on time, quality excellent, ordering &catalog part illustration made easy for do it yourself customers. Special thanks to the order taker very helpful. I. Highly recommend etrailer.com Thanks Fred



- 8327834
by:

Fit perfectly



- 8327834
by:

Very happy with it and a good price



- 8327834
by:

Great. As described



- 8327834
by:



- 7359765
by:

Review from a similar EZ Lube Axle in Trailer Axles


Easy peazy, I've purchased two of these. Sure beats driving all over to find the right axle. Arrived timely and installed easily. Big trip next week so they will get the test, but dexter axels have great reliability.



- T3584F-EZ-8974
by:

Review from a similar EZ Lube Axle in Trailer Axles


Came in bent


Comments
Axle should have a slight bend to it.
-- Etrailer Expert Sierra K - 10/12/2021


- 6340624
by:

Review from a similar EZ Lube Axle in Trailer Axles


After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through) After checking my local source, I was told there was a long lead time for new axles due to the pandemic. I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts. Everything arrived ahead of schedule, allowing me to get back up and running quickly. Thank you etrailer. You are a valuable resource.



- T3584F-EZ-8974
by:

Review from a similar EZ Lube Axle in Trailer Axles


Specs. matched exact to the broken axle and was easy to install. I was surprised that the axle was pre-wired although it was not replacement of the brake axle on my trailer. Hub fit nicely and trailer is now ready for the next haul job. Delivery was as promised.


Comments
The axle has been a good replacement and has worked as it should.
Ronald E - 08/13/2021


- 8327826
by:

Review from a similar EZ Lube Axle in Trailer Axles


etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.



- T3584F-EZ-8974
by:

Review from a similar EZ Lube Axle in Trailer Axles


Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.



- T3584F-EZ-8974
by:

Review from a similar EZ Lube Axle in Trailer Axles


Etrailer was quick to ship and and axle was a perfect fit, axle was good quality. i have used them before as well. they are a good company. thsnks jack



- 8327812
by:

Review from a similar EZ Lube Axle in Trailer Axles


I received the items in a very timely fashion and in great shape. I torched off the old U bolts and removed the axle. I removed the new spring seats using a cut off wheel in my grinder and moved them inward one inch on each side, then MIG weld the new ones on they lined up perfectly to the old ones. I then installed the new U bolt kit and torqued them down to 65 foot lbs. The old bearings were only one year old and reused them after cleaning. I installed new seals at this time. The brake pads were same age as bearings showing little wear. The old axles were not Dexter axles and rusted from the inside out then broke off by the drop.. I replaced both. Was a pleasant experience and would do it all over again.



- T20BTR-EZ-7258
by:

Review from a similar EZ Lube Axle in Trailer Axles


I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down). Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!



- 7685269
by:

Review from a similar EZ Lube Axle in Trailer Axles


Mission accompolished just a few minutes ago. The attached (3) images attached tell the story. Any customer relocating spring seats should measure closely before welding new seats in place to fit their trailer needs. Again your technical assistance and quick order leave me a very very satisfied customer.. [Thumbs up]



- 7359765
by:

Review from a similar EZ Lube Axle in Trailer Axles


Trailer axel fit properly without issues to replace an axel that broke probably from heavy loads on very potted country roads. So far this axel has held up and performed beautifully. Provided instructions and videos very helpful including information to select correct replacement axel. These folks go out of their way to help ensure correct installation and use. Far better than any other supplies I have used.


Comments
So far it is holding up well and working as anticipated.
Merle R - 04/23/2021


- T20BTR-EZ-6048
by:

Review from a similar EZ Lube Axle in Trailer Axles


Worked great for a harbor freight trailer replacement. I had to weld a little to make it fit but so far it’s hauling my firewood out of the mountains nicely.



- 7685269
by:

Review from a similar EZ Lube Axle in Trailer Axles


As described. I had to have the spring mounts moved in but that's not uncommon. Works as it should, Thanks.


Comments
Excellent,better quality than the original.
Eric A - 07/27/2021


- T3584F-EZ-8974
by:

Review from a similar EZ Lube Axle in Trailer Axles


Great service as always out of etrailer. I ordered 2 new axles for my car carrier, great specs on your webpage made for a perfect match. Items arrived in 3 days, heavily wrapped and will add that the end of the axles which could rust if not installed soon were covered in grease, a nice touch to insure no damage. Thanks as always for having a great source for all things trailers!...


Comments
one year later no issues at all
Michael - 06/08/2020


- 7359765
by:

Review from a similar EZ Lube Axle in Trailer Axles


Thanks for your help. The axle finally showed up. Will be installing next weekend



- 6340624
by:

Review from a similar EZ Lube Axle in Trailer Axles


Great product used to replace the original Dexter agricultural style axle. Had no issues attaching to the trailer, and no problems supporting load. Would purchase again the next time I build/modify/upgrade a trailer.


Comments
Product has held up well over the past year in service without any issues towing cars, agricultural equipment, lumber, etc.
Austin B - 10/23/2020

32
343
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Axles

  • Is Dexter Trailer Axle # 8327834 Same as 7256618
    The trailer axle # 8327834 is nearly identical to the axle you have with the exception of the spring centers being off 1/2 of an inch. Other than that the capacity is the same at 7,000 lbs, the hub face to face dimension is 95 inches. So this would work for you but you'd want to have the spring seats moved 1/4 of an inch out on both sides and you'd be set.
    view full answer...
  • Axle for Converting Old Trailer to Flat Bed
    Determining the capacity of a square axle can be a chore, especially for one that has the age on it that yours has, but you already did the right thing by measuring the inner and outer diameter of the bearings. That's really the best way and most reliable way to find the capacity and if you measured and got those inner diameters it would definitely indicate a larger capacity axle. Having said all that, I very strongly recommend going with a new axle for a couple reasons. One is the unknown...
    view full answer...
    Image 1 for
  • How to Make 7,000 lb Underslung Axle Into Overslung Axle
    We do have a way to very easily convert an underslung axle into an overslung axle, but do not offer any overslung. Instead, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles - 7,000 lbs # 8327864 (which measures 94" hub face to hub face and 79" spring center to spring center) or # 8327834 (which measures 95" hub face to hub face and 80" spring center to spring center) and add the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 which moves your trailer's leaf...
    view full answer...
  • What is the Grease Seal ID for the Dexter 7K Trailer Axle
    The Dexter Axle, # 8327834, uses a 2.25 ID grease seal. This is the case for pretty much all 7K axles out there. You typically see the 2.125 ID seals with 5K to 5.2K axles. If you ever need to replace your hubs in the future, we have the Dexter 7K Hub and Drum Assemblies, # 42866UC3-EZ, that fit this axle. I'm sure you've considered this already, but I like to point it out just in case, another important aspect that you will want to consider when replacing axles is to make sure the...
    view full answer...
    Image 1 for
  • How To Determine Axle Rating Of Dexter Torsion Axles
    The best way to confirm the weight capacity of your Dexter Torsion Axles is to find the lot number on the axle tag which is located on the center of the axle on the rear side. This tag should say Dexter Axle and then a 9 digit number. The number you provided did not cross reference to any axles. Since the axles are not in the trailer the originally came in, this is the only way to be sure of the axle rating. If you know the owner of the trailer the axles came from you could also use...
    view full answer...
  • Can I Upgrade Trailer Axle From 3,500 lb to 7,000 lb Axle and Keep 14 Wheels
    You can add a heavier axle to the trailer but the rest of the components of your trailer may not be rated for a higher weight capacity such as the suspension components and wheels. If you go from a 3,500 lb axle to a 7,000 lb axle like part # 8327834 you are not going to be able to keep your wheels because more than likely the bearings in the hubs that fit your wheels will not fit the spindle of the new axle. Also the wheels are more than likely not rated for the 7,000 lb trailer weight....
    view full answer...
  • Availability Of A 95 7000lb Replacement Axle
    I may have an option for you, but there is not a 7000lb axle that can be used with hubs that use the 5 on 4-1/2 bolt pattern. We offer the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 which is 95" long measured hub face to hub face, and has a spring center to spring center measurement of 80" as shown in the included diagram. If you need to move the spring centers to match your trailer you can remove the current ones and weld the # TRSS300 in the...
    view full answer...
    Image 1 for
  • Can a 7,000 lb Axle With Self-Adjusting Brakes and Leaf Springs On Top be Ordered
    We do have a way to get you a 7,000 lb axles with the leaf springs mounted on top as well as ones with self-adjusting electric brakes, but those parts would need to be ordered separately, and I can tell you exactly what you need, which is the following: - Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 - Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 # 42866UC3-EZ - Over-Under Conversion Kit # K71-385-00...
    view full answer...
  • Installation of Idler Hub on 7,000 lb EZ Lube Axle
    I took a look at the installation instructions in regards to using a the nut retainer as opposed to a cotter pin and it specifies: "1) Finger tighten the nut until just snug ... Once in place the retainer/nut assembly should be free to move slightly. 2) If the nut is too tight, remove the the retainer and back the nut off approximately one twelfth of a turn and reinstall the retainer. The nut should now be free to move slightly."
    view full answer...
    Image 1 for
  • How To Determine the Weight Capacity of a Flat-Bed Trailer
    The payload capacity of a trailer will take into account several variables such as frame strength, axle capacity, tire capacity etc. so I cannot provide an exact payload capacity for all dual/triple axle trailers. The only way to do this for a trailer is to find the gross vehicle weight rating (GVWR) which is the most a trailer can weigh. This will take into consideration both the weight of the trailer and how much payload you have. Therefore, if you know your GVWR you can subtract the...
    view full answer...
  • Can Spring Location on 95" Long Dexter Axle be Mounted on Top of Axle
    I do have a way for you to use the Dexter Trailer Axle Beam # 8327834 so that the springs are on top of the axle, but we actually don't manufacture any of these axles so we wouldn't be able to make a custom axle for you. We do however carry the Over-Under Conversion Kit # K71-385-00 which is used to change an axle with traditional springs seats so that the springs can be mounted on top of the axle. If this is the route that you want to take then you want to make sure that the 95"...
    view full answer...
    Image 1 for
  • Where to Measure to Pick Out Replacement Axle for Trailer
    You would need to measure from the hub face to hub face and then from the spring mount centers to pick out the correct axle to fit your trailer. I attached a picture that shows where these measurements are. I attached a link to all of the axles we offer as well.
    view full answer...
    Image 1 for
  • Kaufman Goosenecks Trailer Weight Ratings Questions
    You're correct. The reason your axles like # 8327834 can be rated less than your trailer's GVWR is because generally about 15 to 20 percent of a gooseneck trailer's weight is on the truck. This is actually pretty common with trailers although not as much as it used to be. How much weight are your attempting to carry on your Kaufman Trailer? I will be glad to assist your with this process.
    view full answer...
  • Where Would Tandem Axles Install in Place of Triple Axle Trailer Setup
    To place tandem axles in place of a triple axle trailer will require you to position the center hanger for the tandem axles exactly where the center axle of the triple axle configuration. You can reuse the hangers and suspension you have now but it will require removing all of the hangers basically since everything will get shifted and some of the hangers won't get reused. Unless you are trying to reduce the cost of tire replacements I don't really see the benefit to lowering the...
    view full answer...
  • What is Acceptable Range Between Spring Seat and Hub Face for 7k Axles
    The generally accepted range for 7k axles like # 8327834 between the spring seat and the hub face is 13-18 inches.
    view full answer...
  • Replacement 7K Trailer Axle With 92 Inch Hub Face and 74-1/2 Inch Spring Centers
    The only 7K axles we offer with straight spindles are the Dexter # 8327834 axle you'd looked at and the same axle with brake drums/hubs, part # 8327834-EB. These axles have a hub face to hub face distance of 95 inches and a spring seat center to center distance of 80 inches. These axles could be safely altered so they'd work for you. Using this axle would only move your wheels out by 1-1/2 inches on each side which will not present a problem. The spring center distance isn't a huge deal,...
    view full answer...
  • Measurements Needed to Take for Replacement Axle
    The measurements that you will need to take are from spring center to spring center and hub face to hub face. I have included a picture to help. I have provided a link to the axles that we carry so that you can see if we have a replacement for your trailer.
    view full answer...
    Image 1 for
  • Upgrading a 5,200 lbs Axle to a 7,000 lbs Axle
    Yes, you can upgrade your 24' enclosed trailer's 5,200 lbs axles to 7,000 lbs straight axles. You'll need to upgrade your trailers suspension components, hubs, and wheels/tires. You will want to measure your current axle to ensure fit. I have attached a diagram detailing the dimensions of the Dexter Axle Item # 8327834 you were looking at. If you would like to email me your current axle and spring dimensions I would be happy to make some recommendations for you about the suspension, hub,...
    view full answer...
    Image 1 for
  • How To Choose Correct Replacement for Mobile Home Axles
    In order to find the correct replacement axles for a trailer you need to gather some info on what you have now. This info would at the least be the capacity, hub face length (on center), and spring center length (on center). We do offer replacement solutions for more common capacities and length but not all, so custom ordering may be the only option. I have attached our complete axle selection below. The part # 8327834 for example has a 7,000 lb capacity, 95" hub face, and 80" spring...
    view full answer...
  • Replacement Axle for Quality Trailer Products Model TS70
    We have a 7k Dexter axle that would work perfectly to replace your Quality Trailer Products axle TS70, 7.0k rating, 95 HD80 SC with the part # 8327834 as it matches all capacities and dimensions. Your current hubs and assemblies would transfer over as well.
    view full answer...
  • Recommended Replacement Axle For Tandem Axle Trailer With Broken Mobile Home Axle
    I'm sorry to hear that your mobile home axle broke! The reason that the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327834 has a 5 bolt brake mounting flange, is because it is over 5200lbs. Since your axle has a 4 bolt brake mounting flange, you will want to stick with an axle under 5200lbs like the Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974 which has a 3500lb axle rating, and the 4 bolt flange. This axle measures 89" from hub face to hub face, and 74"...
    view full answer...
    Image 1 for
  • Can the Spring Perches or Spring Seats Be Relocated on a Dexter 7000-lbs Axle
    There aren't any issues with relocating the spring perches on the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 from 80" apart down to 78-3/4"; there are limits to how far you can move the spring perches away from the hub face, but this 1-1/4" total is well within those limits and won't create issues that would otherwise lower the capacity of the axle. You'll need to cut off the old perches and replace them with the Spring Seat for Typical 5,200-lb to...
    view full answer...
  • Should Spring Seats be Welded to Trailer Axle
    Yes, you need to weld the spring seats # TRSS300 to the axles # 8327834 that you referenced.
    view full answer...
  • Replacement Dexter 7K Trailer Axle Options
    I do have an option for you but you'd need to do some measuring to confirm compatibility. The two options we offer are the Dexter 7K Trailer Axle part # 8327864 which measures 94" long (hub face to hub face) and the Dexter 7K Trailer Axle part # 8327834 which measures 95" long.
    view full answer...
  • Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
    An axle with a 3 inch diameter axle tube typically has a 5200, 6000 or 7000 lb capacity. The inner and outer wheel bearings would be the determining factor that would tell you the actual capacity. We do have 95 inch axles (hub face to hub face dimension) but none of our offerings have the proper spring seat spacing, so you'd need to add seats in the correct locations. • For a 95 inch 5200 lb axle with spindles compatible with a 25580 inner/LM67048 outer bearing, use # e55GR • For...
    view full answer...
  • Replacement Trailer Axle with 95 Inch Hub Face and 80 Inch Spring Center Measurement
    I have exactly what you need for a replacement trailer axle with 95" hub face to hub face and 80" spring center to spring center measurement. For this we have the following options based on weight capacity. 3,500 Lbs: part # 7359765 5,300 Lbs: part # 6340624 6,000 Lbs: part # 7461121 7,000 Lbs: part # 8327834 The above options all have the built-in E-Z Lube technology which allows you to easily grease your trailer hubs without having to remove any parts beside the plug for the...
    view full answer...
  • Can I Upgrade from 6 Lug to 8 Lug Wheels to Help Increase Weight Rating of my Trailer?
    Because the total weight capacity of your trailer is limited by the lowest rated component, your axle capacity won't be increased by adding hubs with more lug nuts to the equation-even if they are rated higher than the axle. Moving to 8-lug hubs sounds like you want to move from 5,200-lb axles up to 7000-lb axles. If this is the case, then we have a few options for you listed below; I've also linked below all of the 7000-lb axles we currently have available. Best Upgrade: Timbren Axle-Less...
    view full answer...
  • Are Side-Frame Mount Jacks Available With Different Gear Ratios
    There are jacks with different gear ratios and an another option if you need more lift is the Bulldog 2-Speed Jack set - Fixed Leg - Traditional - Weld On - 17" Lift - 22,500 lbs # BD500153. Apart from that you may want to check out an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which has a combined 12,000 lbs of capacity, which may work and offers 38" of lift.
    view full answer...
    Image 1 for Image 2 for
  • High Capacity Spindle or Axle for Hay Wagon
    I wish we did, but we do not carry any 10k rated trailer spindles. The highest we have is a 7k spindle like part # TRU57FR. This is a standard spindle that could work well on your hay wagon as long as you didn't need more than a 7k capacity. We also carry the hubs compatible like the Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2 - Pre-Greased # AKIHUB-865-7-2-K. If you want the axle and not just the spindles, then I recommend the Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Installed by:
Kathleen M
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624