bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 7000 lbs
  4. 94 Inch Long
  5. 79 Inch
  6. 8 on 6-1/2
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs

Our Price: $773.80
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 167 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Trailer axle measures 94" from hub face to hub face and 79" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs part number 8327864-EB can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (141)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles

  • 7000 lbs
  • 94 Inch Long
  • 79 Inch
  • 8 on 6-1/2
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • No Drop or Lift
  • Easy Lube Spindles

Trailer axle measures 94" from hub face to hub face and 79" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


Specs:

  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 94"
  • Spring-center-to-spring-center length: 79"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 8 on 6-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.72"
  • Wheel stud diameter: 1/2"
  • Wheel size: 16"
  • Limited 5-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS-2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


8327864 Dexter Trailer Axle Beam - Easy Lube - 94" Hub Face - 79" Spring Center - 7K

23-180 (K23-180-00) Dexter 12" x 2" LH Electric Brake Assembly - Drivers Side - 7.0K Axles

23-181 (K23-181-00) Dexter 12" x 2" RH Electric Brake Assembly - Passengers Side - 7.0K Axles

42866UC3-EZ (K08-219-9B) Dexter 12" Hub and Drum Assembly for 5.2K to 7K with Hardware - 8 on 6-1/2 - EZ Lube

11397 7 LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges (3 Pack)

7-5 (191000) Redline Brake Mounting Bolt

Item # 8327864-EB





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs - 8327864-EB

Average Customer Rating:  4.7 out of 5 stars   (141 Customer Reviews)

Trailer axle measures 94" from hub face to hub face and 79" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.

by:

I have ordered several items from etrailer over the years and have never been dissatisfied. These axles are exactly as described. I am replacing a set of 3.5K axles with these 7K axles for greater performance. The 3.5 axles were sufficient but when loaded they were at the max. I can run a heavier load range tire with these and also go from a 5 hole to a 8 hole wheel. The axles have bigger bearings, brakes, hubs, just all around a better set up. This trailer gets used approx. 40K miles per year, most of the time loaded with 3/4 ton trucks.




by:

This is the third time I have ordered from etrailer they are very helpful and their price can’t be beat. The axle that I ordered was easy to find and etrailer clearly explained how to measure my old axle to insure I ordered the correct one.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I replaced my RV's axles from 4400# to this product. I am very pleased with the product including the shipping and the installation.


Comments
Very pleased. I feel my RV rides better with less sway. For the record, I also upgraded my leaf springs to to 7-leaf 3500# capacity each
Nick - 11/11/2022


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.


Comments
Axel has been great! Server long road trips has proven the product.
DaveW - 08/05/2021


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great axle kit, very easy install was able to swap this in the day it arrived to my home. One thing to recommend is buy new U bolts you will be glad you did




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.

Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I have been buying trailer parts from etrailer for years and have they never let me down! Great customer service!




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Axle seem good. The directions for assembly are apparently a copy of a copy of a copy..... ect,making them pretty difficult to read. Difficult enough that I missed the part about how deep to tap in your inside seal. Now we get to do it again.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Five stars because of Hally. She is the only person that knew her job that I spoke to. Axle and brakes are going fine on my trailer.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Installed a yr ago. Perfect product.
One
thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


All the parts look great. The trailer that I’m installing them on is in storage. Will be installing them within next couple of months.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in order..it doesn’t get any easier..




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


So far so good! Axle was not a direct fit even though it was supposed to be. We had to relocate a couple of the mounts for suspension. Other than the trailer rides great, better than ever.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Excellent products would tell everyone to buy from etrailer




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great support and resolution. Had an issue with shipper loosing item. Was promptly helped and replacement items were received in short time




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I can not say enough about how good your product is! The installation went very smooth.
I would highly recommend your product.
It was great to see that everything comes with it right down to the grease.


Comments
Great took the trailer to AZ this last year no problems.
James - 05/15/2020


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Super fast and accurate; awesome company to deal with




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Easy ordering, prompt delivery and great customer service. Highly recommend.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Delivered ahead of schedule.
Very good
service.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


The US made Dexter axle was worth the wait. The shipping through UPS was not the best experience for getting heavy items to Alaska. etrailer customer service was great at resolving the issues with UPS.



25
141
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Replacement 94 Inch Axle for 2006 Weekend Warrior Toy Hauler
    That's a good question, but the measurement from hub face to hub face is taking into account the slight bend that is on all trailer axles (the axles straighten out when a load is placed on them). The axles we carry with a 94 inch measurement from one hub face to the other are the Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs # 8327864 and the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB. Keep in mind...
    view full answer...
  • 94 inch 7k Dexter Axle that Has Brake Assemblies and Hub/Drums
    The axle part # 8327864 does not come with hubs and brake assemblies but we have the part # 8327864-EB is the same axle that does include the brake assemblies and hub/drums like you are wanting.
    view full answer...
  • How to Determine Replacement Axle for 2006 Weekend Warrior 2300 FS Toy Hauler
    We don't have a way to determine what axle is on a specific trailer, but I can tell you how to measure to determine whether or not the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB will work for you; you'll need to take two measurements. You'll want to measure from the face of one hub to the face of the other and then you'll also need to measure from the center of one spring seat to the center of the other. The # 8327864-EB measures...
    view full answer...
  • Replacement Axle Solution for 2006 Carry On Dual Axle Trailer
    The closest option we have that would work well is the Dexter axle part # 8327864-EB which has the same spring center dimension you have of 74 inches but is 1 inch longer overall at 94 inches from hub face to hub face. This is a 7,000 lb capacity axle with a 3 inch outer diameter and comes with hub drums and brake assemblies that have a wheel bolt pattern of 8 on 6-1/2 inch. You didn't mention what specific hardware you'll need but the part # APUBR-8 is the correct size u-bolt kit you'd need.
    view full answer...
  • Does the Dexter 7K Trailer Axle with Electric Brakes Come Assemblied
    The Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB does come with the hubs and backing plates already installed so you would be ready to go once it arrives. It however does not come with u-bolts so if you need those as well you can obtain the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles part # APUBR-8.
    view full answer...
  • How to Pick Out Trailer Axle with 8 Lug Bolt Pattern
    To pick out a replacement axle you need to first know the weight capacity you need, the distance between spring seats, and the distance from hub face to hub face and you'll be set. We don't have every length possible but we do have the 7k trailer axle part # 8327864-EB which uses 8 lug hubs and has a distance of 79 inches between spring seats and 94 inches from hub face to hub face. If you need something different I attached a link to a page that has all of the axles we carry. If you can't...
    view full answer...
    Image 1 for
  • Determining Which 7000lb Trailer Axles Will Fit A 2005 Keystone Everest 364Q
    I would be happy to recommend two 7000lb axles with electric brakes for you, but unfortunately we do not have a break down of the length of axle your 2005 Keystone Everest 364Q uses. You will need to either measure your current axles hub face to hub face and spring center to spring center as shown in the included diagram, or if you can send me a picture of the axle tag I would be happy to get the information for you. The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt...
    view full answer...
    Image 1 for Image 2 for
  • Upgrading to Larger Tires on a 5th Wheel Trailer that Keeps Having Blowouts
    There are 16 inch wheels with the 6 on 5-1/2 bolt pattern that can be used with your 5,200 pound axles. Hubs for 15 inch wheels are also compatible with 16 inch wheels. You just have to make sure that you have enough clearance all around the existing tires to go to the larger size. Tire and wheel combo # TA39VR is a 235/80-16 that is 9.25 inches wide and 30.79 inches tall. This combo is rated for 3,520 pounds at 80 psi so 2 of them on an axle will provide 7,540 pounds capacity. Assuming...
    view full answer...
  • Spring Seat Spacing on Dexter 7K Axle 8327864-EB
    Axle spring seats will be welded in place using a jig so that their positions are pretty much exact. Our 7K axles with the 94-inch hub-face-to-hub-face dimension, shown on the linked page, have spring seats at two slightly different distances, 78-1/4-inches and 79-inches. Dexter axle kit # 8327864-EB does indeed have spring seats placed apart at 79-inches on centers.
    view full answer...
  • Two Complete Axles 7,000 lbs With Electric Brakes for Horse Trailer
    We do have 7,000 lb axles that come with electric brake assemblies, and 8 lug drums included. You will simply want to check out the hub face to hub face length and the center of the spring seat to center of spring seat length. Here are the options: -Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB. The spring seats center on center are 80 inches. -Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 94"...
    view full answer...
  • How To Determine Correct Dexter Replacement Axle With Electric Brakes
    There are options for you, one of which will require you to measure while the other does not, but I was unable to find any type of reference to a Dexter 3K7744 axle. So to replace your current axle with one that has electric brakes you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the...
    view full answer...
    Image 1 for
  • Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
    I believe you are asking for a trailer axle that is 94 inches long from hub-face to hub-face, and 79 inches long from spring-center to spring-center, and a compatible hub with a 5 on 5" bolt pattern. While there are axles that size, there are no hubs with that bolt pattern; the only bolt pattern available for the spindle on a 7,000 lb axle (which is the weight rating of that axle length) is 8 on 6-1/2". A 5 on 5" hub is only a fit for certain 3,000 lb axles, so what you will need for a...
    view full answer...
  • Recommended Dexter Axle and Hubs with Self-Adjusting Brake Assemblies
    The brake assemblies on the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern # 8327864-EB are not the automatic self-adjusting assemblies. You can instead use the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA to swap them out. Another option is to use the following parts to give you the self-adjusting brake assemblies and save you some money: Dexter Trailer Axle Beam with E-Z Lube Spindles -...
    view full answer...
  • Recommended 7,000 lb Axle with Brakes for M105 Military Trailer
    To replace the axles on your M105 Trailer, you will need to know what dimension is the better fit. We have 7,000 lbs axle with electric brakes and drum assemblies that are 95 inches from hub face to hub face with 80 inch on center spring seats or 94 inch with 79 inch centers. We also have straight no drop or 4 inch drop axles. Here are your options: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" # 8327834-EB Dexter Trailer Axle w/ Electric Brakes...
    view full answer...
    Image 1 for
  • Should I Use the Dexter Trailer Hub/Drum with 5 Lug Utility Instead of 8 on 6-1/2 Inch Bolt Pattern
    The Dexter Trailer Hub and Drum Assembly part # 8-174-5UC3 uses a very odd 5 lug bolt pattern that the vast majority of trailer wheels will not accommodate therefore this is a major disadvantage over the standard 8 on 6-1/2" bolt pattern. The 5 lug bolt pattern that the above uses is not the same as the common 5 on 4-1/2" bolt pattern if that is what you were thinking. The minimal savings that you incur would be soon offset by the difficulty of find a matching wheel/tire. I recommend you...
    view full answer...
  • Replacement Bearings for 7K Axle on 2017 Dutchmen Voltage 5W Toy Hauler
    In most cases, it's going to be more cost effective to replace all of the components than it is to simply swap out the axle. You could go with a complete axle like the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB if your current axle is 94" from hub face to hub face. In reality, it's probably going to be most cost effective to replace your hubs, drums and brakes though. If you can confirm the bolt pattern on your current wheels,...
    view full answer...
  • Replacement Brake And Hub/Drum Assemblies for 7,000lb Trailer Axle
    If your axle is not damaged I recommend just replacing the brakes and hubs. The Dexter Trailer Hub and Drum Assembly # 8-219-18UC3 will include the new bearings, lug nuts, dust cap, and grease seal. The races have already been pressed into the hub for you as well. The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 will be the correct brake assemblies for you to install with the brake drum assemblies. If you wish to you can install a new axle with the Dexter Trailer Axle...
    view full answer...
  • Recommended Triple Axle Setup for Tiny Home Trailer
    The best trailer axle option we have for your custom tiny home trailer build is going to be the Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB for 7,000 lbs. This axle is top of the line and comes with everything you need for bolt-on installation. It comes with electric brakes, 8 on 6-1/2" hubs, and zerk fittings on the axle for easy maintenance. The hub face to hub face measurement is 94" so once you have wheels and tires on you will be around 8-1/2' wide. I have attached some...
    view full answer...
  • Replacement Options for Dexter 130123 7,000 Pound Axle for 5th Wheel
    According to Dexter, your 130123 axle is a 7,000 lb axle with a 91-1/2" hub face measurement and 72-1/2" spring center. I do have a solution, but unfortunately none of our 7k axles match this length. What I can offer is the Timbren Axle-Less Trailer Suspension System # TASR7KS01. This system will fit any frame width so there is no need to match your existing axle length. It also upgrades and replaces your suspension components. For a hub and drum assembly you can use the # AKHD-865-7-2-EZ-K....
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Kathleen M
Installed by:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Alexander C
Written by:
Alexander C
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.