1. Trailer Axles
  2. Dexter Axle
  3. 3500 lbs
  4. 89 Inch Long
  5. Leaf Spring Suspension
  6. Spindles Only
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs

Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs

Item # T3584F-8974
lowest price pledge
Our Price: $169.21
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
In Stock
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs Standard Spindles T3584F-8974
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs part number T3584F-8974 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (76)
  • Q & A (44)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - T3584F-8974

  • 3500 lbs
  • 89 Inch Long
  • Leaf Spring Suspension
  • Spindles Only
  • 74 Inch
  • No Hubs
  • Standard Spindles
  • Dexter Axle

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindles - no drop
    • Standard grease application
  • Spring seats, brake flanges, and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Bearings (sold separately):
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Grease seal: 10-19 double lip
    • Outer diameter: 2.565"
    • Inner diameter: 1.719"
  • Brake flange configuration: 4 bolt


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T3584F-8974 Dexter Replacement Axle Beam - 89" Hub Face - 74" Spring Center - 3,500 lbs






Customer Reviews

Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs - T3584F-8974

Average Customer Rating:  4.8 out of 5 stars   (76 Customer Reviews)

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center.

- T3584F-8974
by:

Easy to install with new ubolts and plates. Improved tire wear dramatically from old one.


Comments
Great
Bob C - 06/17/2021


- T3584F-8974
by:

Great service! Axle was a perfect fit! Best store for trailer parts. I'm looking for fenders now. Guess where I'm going to buy them. That's right, right here. I suggest everyone do the same and save yourself the headaches of other stores backorder and bad customer service!



- T3584F-8974
by:

I replaced both axles and tough lock and I also put a Jack on my trailer i purchased theses parts from etrailer they were a perfect fit i really like the parts it was easy to order from etrailer the people i dealt with were really helpful if i had any questions i will use etrailer in the future for my trailer needs I would suggest to anyone working on a trailer weather it is yours or not use etariler for your patrs



- T3584F-8974
by:

Great service and fast delivery! I have always had great service from e trailer!



- T3584F-8974
by:

The spring center spacing was 74" as advertised. However, the information page made it sound like using this for my 74.5" spring spacing would be no big deal. I did manage to get it to fit but I will be watching this closely. There should be a statement on all trailer axles that stresses the importance of proper spring center distance or explain what is all involved in changing the spring mounting seat location.



- T3584F-8974
by:

Good product. Installed easily and fit perfect. I was amazed how fast the axle was delivered. Made it easy to get my trailer back on the road. Thanks for your fast service and great product.



- T3584F-8974
by:

I was surprised at how easy this whole process was through etrailer. I was looking around locally for the same axle and found several of the same axle but all were around $200. I decided the next morning I would go get one locally, but then checked here and found axle a lot cheaper here. It was a Sunday night when I placed order and didn’t expect any response on my order till Monday but to my surprise about 1 hour later I got a email saying my order was processing and then a little while later another email saying was ready to ship, all on Sunday night. Order cane in the exact day they said it would. Will definitely be using etrailer for all my trailer items now. Easier than amazon. Thank you etrailer.



- T3584F-8974
by:

Price was very reasonable, speedy delivery, good quality product.



- T3584F-8974
by:

Just what I needed to upgrade my trailer !!



- T3584F-8974
by:

Delivered in great shape, packaging was good, was worried about such a large item being damaged but it wasn't. Exactly as described.



- T3584F-8974
by:

Great price and fast shipping. Thank you. I recommended you to my neighbor, you will have an order from him soon.



- T3584F-8974
by:

Ordering was quick and easy. The new axle was a direct fit and went in with easy. Had the trailer back in service within hours of the axle being delivered.



- T3584F-8974
by:

Item was backordered but etrailer kept me informed and provided an alternative had I needed one.



- T3584F-8974
by:

Part was shipped and delivered in a very timely manner. Axle was an exact replacement for what I needed. Great service, quality product. Will definitely use etrailer again when the need arises.


Comments
The axle I purchased is still getting the job done !! Thanks for making a quality product.
Mike M - 07/17/2018



- T3584F-8974
by:

Wonderful customer service ,very prompt delivery and just an overall good transaction



- T3584F-8974
by:

Axle fit perfectly and was a super easy swap.



- T3584F-8974
by:

Service was excellent! Courteous and knowledgeable staff were expedient in their ability to answer questions or refer me to technical staff for answers The equipment has performed as advertised for hundreds of miles of towing withstanding the elements of hyytÿ



- T3584F-8974
by:

Super fast shipping



- T3584F-8974
by:

Super easy to swap out with the old axle, the bearings fit the spindles perfect. The spring perches and the axle itself were straight, would and will purchase from again!



- T3584F-8974
by:

The axle was great, but I SCREWED UP the leaf springs.They understood my deli ma and sent out the springs I should have ordered. Most pleasant people I have ever dealt with. Everything ships quick


Comments
How sweet it is
Gerard - 12/04/2019



- T3584F-8974
by:

Great quality shipped in 3 days .description could use a little clarity of flange to flange link and overall link.



- T3584F-8974
by:

I needed to replace a bent axle on my 16 ft dual axle utility trailer. The axle from etrailer.com was OEM and was a perfect fit. I've bought from etrailer.com before and will continue to do so. They offer great products at competitive price points with fast shipping and great customer service.


Comments
Thanks for the follow up.....just another example of etrailer.coms outstanding customer service. And, what a coincidence,......I was just on your website in the last couple of days looking at stuff for another trailer I plan to purchase in the next few weeks.BTW....I stand by my initial reviews....outstanding products, fair pricing, fast shipping, and outstanding customer service.
Tony H - 03/11/2018



- T3584F-8974
by:

Easy order and delivery in 2 days! Perfect fit. Excellent product that showed up in near-perfect condition.



- T3584F-8974
by:

I have no problem with etrailer great service fast shipping Great communication but the dexter axle I purchased had poor weld job on one side dexter needs better Final assembly inspection practices Again I have no problem with etrailer



- T3584F-8974
by:

I received my product from etrailer.com which was a axel and a hub they fit perfectly and i am very satisfied so i give etrailer a high rating so far I've been happy with the product i purchased and i will be purchasing more prices are competiable I would recommend etrailer to friends and family when i get finished I will send pictures of my work and the products thank you etrailer


26
77
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Axles

  • Recommended Replacement Axle For Dexter 3500lb Axle On Travel Trailer
    I reached out to my contact at Dexter and your current axle has a hub face to hub face measurement of 88.58" and a spring center to spring center measurement of 68" with an axle capacity of 3500lbs. The closest replacement option we have is the Dexter Trailer Axle Beam with Standard Spindles-3500lb # T3584F-8974 which has a hub face to hub face measurement of 89", and a spring center to spring center measurement of 74" as shown in the included diagram. Since the hub face measurement...
    view full answer...
    Image 1 for
  • Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
    Brake flanges on 3,500 lb axles are going to be the exact same between a Dexter axle and Lippert but sometimes the Al Ko options are different. I believe you are asking about the price difference between the Dexter 3,500 lb axles part # T3584F-8974 and # T3584F-EZ-8974 though which that comes down to the spindle style. The more expensive EZ lube spindle axle has a grease fitting on the end of it that allows you to easily pump grease into it whereas the other option does not and requires...
    view full answer...
  • How to Determine Correct Replacement Axle
    In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR of your trailer. For example the Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974 you referenced has a 3,500 lb capacity and measures 89 inches from...
    view full answer...
    Image 1 for
  • Determining Correct Replacement Axles For Tandem Axle Trailer With Bent Axles
    You will definitely need to replace both axles due to them being bent. With that said I would also go ahead and check the frame of the trailer and the suspension components for damage to make sure the trailer does not have any structural damage due to being overloaded enough to bend both axles. To measure for the correct replacements you will need to measure from hub face to hub face, and from spring center to spring center as shown in the included diagram. In addition you will need...
    view full answer...
    Image 1 for Image 2 for
  • Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
    The spindles on the Dexter Axle # T3584F-8974 has the following measurements: A 1.75 inches B 1.719 inches C 1.378 inches D 1.063 inches E 1 inch
    view full answer...
    Image 1 for
  • How To Determine The Correct Axle To Replace Mobile Home Axles On Trailer
    I would be happy to help you find the correct axles to replace the mobile home axles on your trailer, but you will actually need to know the hub face to hub face measurement to determine the correct axle length. The spring center measurement is for connecting the axle to your leaf springs, and as long as the hub face to hub face measurement is correct you can remove the preinstalled spring seats and weld new ones in the correct location. For example the Dexter Trailer Axle Beam with...
    view full answer...
    Image 1 for
  • Purpose of Wire Inside Dexter 3500-lb Axle
    Dexter's 89-inch/3500-lb axle kit # 35545E-ST-EZ-89, for example, includes electric drum brake assemblies so it will have wiring in place. Electric brakes are simple to wire; there are only two pigtail leads from each brake and either one can be used for ground or +12V. Generally electric brakes should be wired with 10-gauge duplex wire like # 10-2-1. The linked article on electric brakes may be of interest to you. The brake controller we most often recommend is the Prodigy P2 # 90885...
    view full answer...
  • Can Tandem Axle Trailer Have Axles With Two Different Weight Capacities?
    It is a good idea for both axles on a tandem axle trailer to have the same rating. Even if the 6,000 lb capacity of your axles is rated high enough for your trailer, if you have a load heavier than 2,500 lbs sitting over your 2,500 lb rated axle it will not be able to handle it. I recommend replacing that axle with one rated for 3,500 lbs such as # T3584F-8974. This axle measures 89" from hub face to hub face and 74" from spring center to spring center. You will need to know those two...
    view full answer...
    Image 1 for
  • Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
    I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # 84546UC3-EZ if you have the grease zerk integrated in the spindle. Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend...
    view full answer...
  • Recommended Axle And Fenders For Karavan Trailer
    The 3,500 lb axle we offer that meets the 82-5/8 flange to flange measurement you mentioned you need is part # T3584F-8974. The spring to spring measurement for this axle is 74 inches. None of the axles we offer in this weight capacity have the 76 or 78 spring-to-spring measurement. The U-bolt mounting kit I recommend is part # APUBR-1. This includes the U-bolts, plates, and hex nuts needed for installation. If you are looking to buy new springs for your trailer you can check out...
    view full answer...
  • Castle Nut Torque Spec for Trailer Axle
    When installing the castle nut on the end of the spindle, there is no specific torque rating. The nut is ran down until there is no side to side play in the hub, and then backed off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle. If you click on the video link I provided, and fast forward to the 4:45 minute mark, you can see the procedure.
    view full answer...
  • How To Find the Correct Axle Replacement for a Four Winns Tandem Axle Boat Trailer
    I would love to help but in order to find the correct replacement axle for your trailer or any trailer for that matter we would need you to measure the one you have now. The needed measurements are going to be from the face of each hub and then from the center of each spring seat. If the bad axle cannot be used as a reference you can simply take these measurements with the other axle on the trailer. I have then attached for you below a list of our trailer axles which you can sort by capacity...
    view full answer...
    Image 1 for
  • Replacement Axle for 1968 Shasta Camper
    I assume this is a replacement axle, so in order to choose the correct one, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added, with A being the hub face dimensions and B the spring center dimensions. For example, the Dexter Trailer Axle Beam # T3584F-8974 is 89" hub face to hub face and 74" spring center to spring center with a weight capacity of 3,500 lbs. Additionally, the axle may not...
    view full answer...
    Image 1 for
  • Trailer Tires Showing Excessive Wear on Inside Edges of Tread
    Typically a trailer axle will have some camber in it - some bend - such that when it is not loaded the tops of the wheels bow outward slightly, with the outside edges of the tire treads making first contact with the ground. This allows that when the trailer is loaded with weight the axle will be pushed downward to a flatter position with the tire treads level on the ground. Please refer to the linked photo showing an axle and its camber. With your trailer unloaded look at it from the...
    view full answer...
    Image 1 for
  • Does Two Axles Rated for 7,000 lbs Equal 14,000 lbs Capacity?
    Yes, if your trailer has two axles that are rated for 7,000 lbs then they would have a 14,000 lb capacity. However, there should be an identifying stamp somewhere on the trailer that has its capacity on it. You would need to follow whatever the lowest rated component on your trailer is in terms of capacity.
    view full answer...
  • Information Needed to Choose Replacement 3500 lb Trailer Axles
    We do offer a limited selection of 3500 lb trailer axles. To determine if any of them would be compatible with your trailer, I'd need to know the hub face to hub face dimension and the distance between the spring seat centers. I'm not familiar with the bolt pattern you mentioned, are you sure it's not a 5 lug on a 4-1/2 inch bolt circle? If you're wanting to reuse your current hubs, I'd need to know the inner and outer bearing reference numbers, and whether the trailer has brakes. I'll...
    view full answer...
    Image 1 for
  • Turning Square Trailer Axle Upside Down for Extended Life On Previously Overloaded Axle
    Flipping your axle will help with the upward bend to assist in support and reducing uneven wear on tires. The natural bow in an axle is designed to be slightly upward so under load it will even to level at most. To flip your axle you may need to drill a hole for the springs to fit properly but because your axle is already under the leaf springs, the hole may already exist. Because of your square axle, no other components will be needed unless the plate is welded in place. If that...
    view full answer...
  • Axle Capacity Available for Trailer Axle with 89 Inch Hub Face
    It sounds like you are looking for a leaf spring trailer axle with 89" hub face to hub face measurement. If that is the case then we have the Dexter Trailer Axle Beam with E-Z Lube Spindles part # T3584F-8974 which is rated for 3,500 lbs or part # 8327820 which is rated for 5,200 lbs. These are the two most common capacities but we don't have have the ability offer oddball capacities such as 3,750 lbs. If you need u-bolts as well, we have the U-Bolt Kit for Mounting Kit part # APUBR-1...
    view full answer...
  • Can I use a Rectangular Axle with Round Axle on Tandem Boat Trailer
    I spoke with my contact at Redneck Trailer Parts and he said that yes you can use a rectangular tube axle with a round tube axle on your tandem boat trailer as long as the hub base diameter and spring center diameter are the same. You will also need to add U-Bolts. I have included a link to all of our U-Bolt kits for your to check out.
    view full answer...
  • 3,500 lb Trailer Axle for Homemade Trailer
    There are 3,500 lb axles that have dimensions that are longer than the 66 inches that you said your students trailer was, such as the Dexter Trailer Axle Beam # T3584F-8974 which measures 74 inches from spring center to spring center and 89 inches from hub face to hub face. There is a lower-rated axle, the Dexter # T20BTR-7258 which is 58 inches from spring center to spring center and 72 inches from hub face to hub face. I have added a link to an install video of the 3,500 lb axle and...
    view full answer...
    Image 1 for
  • Can Wires on Replacement Axle be Used for Electric Brakes
    The brown wires on the axle # T3584F-8974 can be used to cross your electric brake power from one side to the other. You'll need to get power and ground from the trailer's 7-way to one brake assembly and then splice in the brown wires on the axle, one to power and one to ground. Then connect each of the wires to the brake on the other side of the axle. The brown wires can also be used for brake lights instead of the brakes themselves in the same fashion but not both.
    view full answer...
  • Replacement 3,500-Lb Axle for 2006 Fleetside Bayside Popup Trailer
    All of the 3500-lb trailer axles we offer have a hub-face-to-hub-face length of 89-inches. For an axle with standard spindles I recommend part # T3584F-8974. The spring-center-to-spring-center measurement is 74 inches. If that matches the system you have on your camper then this will work well for you. Keep in mind the hub components are all sold separately and should be replaced since you are getting new spindles. The U-Bolt Mounting Kit I recommend for this axle is part # APUBR-1....
    view full answer...
  • What Does Dexter Trailer Axle # T3584F-8974 Weigh
    The Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974 that you referenced weighs 34 lbs.
    view full answer...
  • Availability of the Dexter Axle # 35545I-ST-89 Without Hubs
    Sounds like you don't need the hubs that come with the Dexter Axle part # 35545I-ST-89 and you just want the axle. For that you would just want the part # T3584F-EZ-8974 that you referenced.
    view full answer...
  • Locating Replacement Axle for Clipper 16RBD Trailer
    Based on my research, it looks like your Clipper 16RBD trailer should have a 3,500 pound axle, however I do recommend verifying this. In order to pick out a replacement axle, you will also need to measure the hub-face-to-hub-face length on the existing unit, along with the spring-center-to-spring-center length. For example, the Dexter Trailer Axle Beam # T3584F-8974 has a 3,500 pound capacity, an 89 inch hub face length, and a 74 inch spring center length. I have attached an image that...
    view full answer...
    Image 1 for
  • Recommendations For Replacing An Axle With A 91 Inch Hub Face Measurement
    Though I do have another option available, the axles we currently have will not match your specifications, unfortunately. With that being said, the Timbren Axle-Less Trailer Suspension System # A35RS545E will be rated to 3,500 pounds, includes the brakes and drums, and will not rely on hub face or spring seat measurements. These will bolt directly to the frame of the trailer and give you independent suspension, which will also improve the ride of the trailer. However, they are not inexpensive....
    view full answer...
  • How To Find Correct Replacement Axle for Forest River Surveyor
    I don't know what axle your trailer uses either unfortunately but if you can take a bit of time to measure the exact spring center length, hub face length, and note the weight capacity on the axle tag you can determine fit for yourself matching the above up with an option below such as the Dexter Trailer Axle Beam part # T3584F-8974 which has a 3,500 lb capacity and measures 89" at the hub face and 74" at the spring center.
    view full answer...
  • Accuracy Of Axle Spring Center Measurements For Dexter Axles
    In my experience these spring center measurements have always been spot on from Dexter. You can be assured that the 74" spring center measurement on the Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974 will be accurate. You can have the Spring Seat # TRSS238 moved to match your spring mounts or if able to move your spring mounts to match the spring center measurement of the axle. If you need help selecting brakes or hubs for this axle please let me know your application...
    view full answer...
  • How to Choose Correct Replacement Axle For Trailer
    I believe the video you are referring to is quite old and just an example on how to replace an axle; we don't offer a UGT axle, and you should also never use a mobile home axle on a trailer. The reason for that is mobile home axles are one-time uses designed to get a mobile home from Point A to Point B and that's it. I can tell you what you need to know in order to get a replacement axle though. First, you will need to know the dimensions of your current axle's hub face to hub face and...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee DeAnne T
Updated by:
DeAnne T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.