bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 5200 lbs
  4. 89 Inch Long
  5. 74 Inch Long
  6. 6 on 5-1/2 Inch
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs

Our Price: $678.61
Trailer Axles
Shipping Weight: 143 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs part number 8327820-EB can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (184)
  • Q & A (0)
  • Photos

Dexter Trailer Axles

  • 5200 lbs
  • 89 Inch Long
  • 74 Inch Long
  • 6 on 5-1/2 Inch
  • No Drop or Lift
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • Easy Lube Spindles

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 6 on 5-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.44"
  • Wheel stud diameter: 1/2"
  • Wheel size: 14-1/2" - 16"
  • Limited 5-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: LM67048 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: LM67010
  • Grease seal (included): GS-2125DL
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

8327820 Dexter Trailer Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 5,200 lbs

8-201-5UC3-EZ (K08-201-94) Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube

23-106 (K23-106-00) Dexter 12" Electric Brake Assembly, RH - 6,000 lbs

23-105 (K23-105-00) Dexter 12" Electric Brake Assembly, LH - 6,000 lbs

457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge

7-5 (191000) Redline Brake Mounting Bolt

Item # 8327820-EB

Customer Satisfaction Score:

Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs - 8327820-EB

Average Customer Rating:  4.8 out of 5 stars   (184 Customer Reviews)

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.



Axel has been great! Server long road trips has proven the product.


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.



I finally got to finish the trailer in the spring of 2022 and install these axels and brakes. Perfect fit and Im very happy with the results.


The product is all I could have asked for. The package was complete in that all fasteners, were included along with the proper lubrication. Each item was made/machined well and went together without any problem. After the first year no problems, all bolts, nuts, and fittings are tight and working well. If need be I will buy from E-Trailor again.


I would have given you a five star, but I had to clean up the grease, the tube was squashed, and it was a mess. With all the damage to the outside container the carrier must have dropped it a few times. I believe the parts are okay, will let you know if otherwise.


I have been buying trailer parts from etrailer for years and have they never let me down! Great customer service!


Excellent product for replacement axles on your trailer. Axles came well packaged and installed easily. I would recommend ordering the axle ubolt kits that fit your application for ease of installation instead of using the existing hardware.


Works well


Good quality product Pact very well on delivery some assembly required but very easy very fast shipping


Very good quality axel and shipping was quick.





The whole staff is top notch at etrailer, and easy to get ahold on the phone. Dexter is a quality product and etrailer offers it at a fair price. The only negative I can share is the plastic plugs they ship in the hubs folded the excluder lip backwards on the inboard hub seal. It took a little bit of working by hand to fix it. It's a blind install so can't see if it went on right. Would be nice to see a better plug used there or maybe just a piece of tape over it. That's on dexter though, not etrailer.


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.


I ordered 2 axles snd 2 fenders on Wednesday and parts arrived on Friday at noon. Estimated ETA was 5 days. Parts were shipped same day i ordered. Parts arrived in perfect condition. I am very impressed with the super fast service, as well as being kept informed of every step. This was my first purchase from etrailer but I will definitely use them again for all my trailer needs. My only gripe, which was my fault, is in only ordered 1 Ubolt kit but I ordered 2 axles. It stands to reason if I orderedc1 ubolt kit and 2 axles it may have been an oversight on my part and a phone call or email to check if I needed 2 ubolt kits would have been nice.
I highly recommend them.


This axle was exactly what I needed. There was originally a mistake in fulfillment as the axle I received did not match my order. Once the correct axle came I had no problems with installation.


Highly recommend! I first made the mistake and ordered from “the other trailer parts outlet” so it took 10 days from my order to receive missing and beat up broken China made parts. The other place didn’t want to replace but wanted me to repair at my time and cost. I called etrailer, ordered on Monday, received on Wednesday. No damage as they actually package the parts up correctly. I got brand name parts too. Lesson learned. If you are on the fence or shopping around. Save yourself 10 days, 5 phone calls and hassle. Shop etrailer first.


This company has by far the best customer service I have experienced in a long time. The majority of my order was received promptly with the remainder being damaged in transit. I received at least 4 emails about this and the issue was resolved within 12 hours. I would highly recommend eTrailer to others.


Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in doesn’t get any easier..


Installed a yr ago. Perfect product.
thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.


Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.


I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.


No problems or issues with quality. Assembly went well. The price was fair and shipment was packaged excellently. Freight was a little slow, possibly due to Covid or product shortage and across nation travel.
No problems with assembly due to attached paperwork.
Very good results.
Thank You.


I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.

Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.


I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!

Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Availability of 5,200 lb Trailer Axle with 74 inches Between Spring Seats
    To pick out replacement axles you need a few pieces of info. You need the capacity like you mentioned, you need the hub face to hub face dimension and you need the spring seat to spring seat dimension as well. With that info you can determine what you'd need. For example, if the 74 inch dimension you listed was from the spring seat to seat dimension and you needed 89 inches from hub face to hub face you'd want the # 8327820-EB which comes with hub/drums and brake assemblies.
    view full answer...
  • How Much Does the Dexter 5,200 lbs Axle w/ 6 on 5-1/2 Electric Brake Hubs Weigh?
    The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs item # 8327820-EB weighs 154 lbs.
    view full answer...
  • Replacement Trailer Axle for Lippert Axle V000416795
    The Dexter Trailer Axle w/ Electric Brakes # 8327820-EB will work for you but you should note that it is one inch shorter from hub face to hub face so as long as you have at least 1-12 inches from your inner sidewall to the frame of your trailer this wouldn't be an issue at all. Most likely you are totally fine though.
    view full answer...
  • Why Aren't Trailer Axles Made Totally Flat without a Bow in Them
    They put a slight bow into trailer axles so that when they have weight on them the camber angle for the wheels/tires isn't bad. Basically the axle slightly flattens out with weight so that you get the correct camper angle. Your choice would be to order an axle in the over/under configuration you need or installing an over/under kit if needed. If the brake shoes are upside down they'll still work fine but if you have a left side assembly on the right side of a trailer or vice versa you'd...
    view full answer...
  • What Brand Hubs, Bearings and Brakes are On Dexter Axle 8327820-EB
    Hey Todd, so the Dexter trailer axle part # 8327820-EB that you referenced has Dexter hub/drums, brake assemblies, and TruRyde bearings.
    view full answer...
  • Recommended Axle To Replace Older AL-KO T44 With Discontinued Braking Assemblies
    I have a replacement option for you, but unfortunately the AL-KO braking assemblies # K23-538-00 and # K23-539-00 have been discontinued after AL-KO was bought out by Dexter. The best option would be to replace your current axle with one that uses standard brakes to allow you to find replacement brakes now and in the future. Since we do not have any 4400lb axles, I recommend using 5200lb axles as a replacement. We offer the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2...
    view full answer...
    Image 1 for
  • AL/KO 5200 lb Axle Replacement
    We offer some Dexter axles that might be a good replacement. You'll need to measure the hub face to hub face and spring seat to spring seat dimension of your current axle to see if what we offer is compatible. I've provided a diagram showing how to take that measurement. All the axles I'm showing you use spindles compatible with 25580 inner/LM67048 outer wheel bearings. For a 95 inch hub face and 80 inch spring center, use # 6340624-EB which includes hub/drums with 6 lug on a 5-1/2 inch...
    view full answer...
    Image 1 for
  • Recommended 5,200 lb. Axle for 5th Wheel RV
    I do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we will need to identify what axles you have installed outside of just the weight rating. I have linked a couple help articles that walk through how to determine the hub face measurement, spring centers and important points to best identify a replacement length. For a 5,200 lb. axle, I prefer the Dexter Trailer Axles with E-Z Lube spindles that come complete with electric brake assemblies,...
    view full answer...
  • 5200 lb Trailer Axle With 70 Inch Spring Centers
    Although we don't offer a 5000 lb axle, we do offer 5200 lb axles that might work for you, depending on the hub face to hub face dimension you're needing. We offer Dexter axles with an 86-1/2 inch hub face to hub face dimension and 71-1/2 center to center spring seat spacing that could work for you, but you'd need to remove the existing spring seats and tack new ones in place using part # TRSS300 at a 70 inch center. If an 86-1/2 inch hub face would work for you, we offer the following: •...
    view full answer...
  • Parts Needed To Replace 3,500 Lb with 5,200 Lb Trailer Axles
    Yes, you can replace the 3,500 lb Dexter Axles with 5,200 lb Dexter Axles by simply swapping out the old for the new. That said, you will need new u-bolts as the axle will be larger in diameter (2-3/8" vs. 3"). The bolt pattern will also change from a 5 on 4-1/2" to a 6 on 5-1/2" so you will need new wheels/tires as well. Therefore, you will need new axle tubes, u-bolts, and wheels/tires in order to make the swap but these are all bolt-on parts. For the axles you just need to measure...
    view full answer...
  • Recommended Replacement 5,200 lb Axle with 89 Inch Length
    Traditionally it is not a 5,000 lb axle but rather a 5,200 lb axle. There are two 89 inch hub face to hub face options we carry, they both have 74 inch spring seat centers, but one comes with the electric brakes and hubs and the other is just the axle. If you will use electric brakes, I recommend going with the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lb # 8327820-EB. If you will use hydraulic brakes then I recommend instead using the...
    view full answer...
  • How To Upgrade to a 5,200 Lb Axles On a Trailer
    In order to find the correct replacement axle you have a few options. The first option would be to simply measure the axle you have now and record both the spring center and hub face measurements. The other option would be to look at the axle tag and read the hub face (HF) and spring center (SC) measurements off of this as it should be listed for you here using these aberrations. The final option would be to record the serial number and get in contact with the axle manufacturer. I would...
    view full answer...
  • Upgrading Underrated Axles on 31-4BH Coleman Lantern Travel Trailer
    If I'm reading you correctly, your travel trailer has a GVWR of 10K, but has two 3500 axles? If that's the case, your axles are horrifically overloaded and should be upgraded. Installing 12 inch brake assemblies (which likely wouldn't work because the available 12 inch drums would use a different bearing set than a 3500 lb axle) would provide better braking, but wouldn't fix the fact that the axles are underrated. Your best course of action would be to replace your current axles with 5200...
    view full answer...
  • Replacement Axle Options For Trailer That Uses Obsolete 22834 Hub With Bearings 2788 & 1779
    I have some replacement options as the Hub 22834 that uses the Inner Bearing # 2788 and Outer Bearing # 1779 is obsolete. 86-1/2" Hub Face Dexter Trailer Axle w/ Electric Brakes # 8327816-EB 89" Hub Face Dexter Trailer Axle w/ Electric Brakes # 8327820-EB 95" Hub Face Dexter Trailer Axle w/ Electric Brakes # 6340624-EB All these axles will come complete with brakes and hubs.
    view full answer...
  • Does the 5,200 Lb Dexter Trailer Axle 8327820-EB Come with Leaf Springs
    The Dexter Trailer Axle part # 8327820-EB does not come with leaf springs but we do offer these separately. If you can provide me with the length of your existing leaf springs I can then offer a recommendation. Otherwise, I have attached a list of options for you. The spring seats are installed under the axle tube but you can move these to the top with the Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 if needed. The distance from the hub face to the center of the leaf...
    view full answer...
  • Can Trailer Axle be Replaced with One that Has Longer Hub Face Length
    You may be able to replace your existing axle that has an 84 inch hub face length with one that has an 89 inch hub face length without a problem but it's going to be dependent on your existing spring center length. This is the distance from the center of the spring seat on one side of the axle to the center of the seat on the other, which essentially gives you the width of your trailer. When picking out a replacement axle you want to try and match up the hub face lengths like you mentioned...
    view full answer...
    Image 1 for
  • Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268
    I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle # 402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your trailer are unusable the only option is going to be to go ahead and replace the axle to one that uses modern braking assemblies. Since we do not have any 4400lb axles, I recommend using 5200lb axles as a replacement. We offer the Dexter Trailer...
    view full answer...
    Image 1 for
  • Replacement 6 on 5-1/2 Inch Trailer Hub with 15123 and 09067 Bearings
    I took a look through our available selection of hubs/drum and none of them have the bearing numbers you provided. Therefore, the only option we can offer you is a replacement axle. If this is something that you would be interested in then the first thing we need to do is measure the axle you have now. The first measurement you will need to take is from the end of each hub face and then from the center of each spring seat. Once the length measurements are acquired we can then measure the...
    view full answer...
    Image 1 for
  • Recommendation for Upgrading Brakes on Tow Dolly
    I do not have enough information to know what you have and if that old most likely will be challenging to locate replacement parts. My suggestion is to remove and replace the entire axel assembly. I suggest trying to first identify the current axel weight rating and manufacturer by looking for markings on the axel itself. We can help with hydraulic drum brakes such as the Hydraulic Trailer Brake Kit - Left/Right Hand, 3,500 lbs., # AKFBBRK-35 and complete axle kits with electric brakes,...
    view full answer...
  • Over-Under Conversion Kit for 3" Dexter Axle
    You can absolutely use the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB and put them below your leaf springs. What you need to do is use the Trailer Springs Over-Under Conversion Kit # K71-385-00, so long as you have double-eye leaf springs; which will then be on top of the axle like you wanted.
    view full answer...
  • Are Replacement Drums Available For An AL-KO 4400 Pound Axle?
    Due to odd spacing with AL-KO 4,400 pound axles, specifically how far out they mounted the brakes, there will not be any current drums available as replacements. With that being said, the best thing to do will be to replace the axle with something that is more common, like the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB. This will include everything needed to replace the axle, including brakes, drums, bearings, seals, grease caps, lug nuts, and even grease. However, this will also...
    view full answer...
    Image 1 for
  • Replacing Existing 3500 lb Axle With a 5200 lb Axle
    When replacing a trailer axle, the spring seat spacing isn't super-critical because you can always relocate those by obtaining new spring seats and having them tacked into place where you need them. The hub face to hub face distance is what's critical. What's the hub face dimension of your current axles? We offer 5.2K axles in the 3 most popular lengths (hub face to hub face) of 86-1/2 inches, 89 inches or 95 inches. • 86-1/2 inch E-Z Lube axle, part # 8327816 for the axle only or # 8327816-EB...
    view full answer...
    Image 1 for
  • Availability of 89 Inch Axle with 6 Lug Hubs and Electric Brakes
    We currently have two Dexter 89 inch axles available that feature hubs with a 6 on 5-1/2 inch bolt pattern and electric brake assemblies. The Dexter # 8327820-EB features a 5,200 pound capacity and the Dexter # 8327830-EB has a 6,000 pound capacity. The 89 inch measurement on the axles refers to its hub face dimension, which is the length from the base of one wheel stud to the base of the other wheel stud (see attached image). Both axles are equipped with E-Z Lube spindles and hubs...
    view full answer...
    Image 1 for
  • Availability of 5,200 Pound Axle with 8 on 6-1/2 Inch Hubs and Electric Brakes
    We do have a nice selection of 5,200 pound axles available that include electric brakes, however the hubs that are included all have a 6 on 5-1/2 inch bolt pattern. I have attached a link that will take you directly to this selection that you can look through if needed. We also have a couple 5,200 pound Dexter axles that do not include hubs so you can add those with a 8 on 6-1/2 inch bolt pattern like what you are needing. For example, the Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...

Do you have a question about this Trailer Axle?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.