bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 7000 lbs
  4. 95 Inch Long
  5. 80 Inch Long
  6. 8 on 6-1/2 Inch
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs

Item # 8327834-EB
Our Price: $1,198.62
Trailer Axles
Shipping Weight: 168 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs part number 8327834-EB can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (185)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - 8327834-EB

  • 7000 lbs
  • 95 Inch Long
  • 80 Inch Long
  • 8 on 6-1/2 Inch
  • No Drop or Lift
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • Easy Lube Spindles

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • U-bolt kit (APUBR-8) available separately
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 8 on 6-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.72"
  • Wheel stud diameter: 1/2"
  • Wheel size: 16"
  • Limited 5-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS-2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

8327834 Dexter Trailer Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 7K

23-180 (K23-180-00) Dexter 12" x 2" LH Electric Brake Assembly - Drivers Side - 7.0K Axles

23-181 (K23-181-00) Dexter 12" x 2" RH Electric Brake Assembly - Passengers Side - 7.0K Axles

42866UC3-EZ (K08-219-9B) Dexter 12" Hub and Drum Assembly for 5.2K to 7K with Hardware - 8 on 6-1/2 - EZ Lube

457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge

7-5 (191000) Redline Brake Mounting Bolt

Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs - 8327834-EB

Average Customer Rating:  4.8 out of 5 stars   (185 Customer Reviews)

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Delivered a $1200 axle on sooner than promised. Thank you!


Great service, fast delivery, and exceptional support. I would never think of buying trailer parts anywhere else. The axle purchased was of high quality, and the wheels are top notch. Very happy with my purchase!

Leon J.


The axle and wheels have been on my trailer for a year. The brakes are responsive and powerful, and react well to the brake controller. The wheels have been excellent, and the rims are true and work great. I do t have anything bad to day about this setup!


The product was all in good shape. The only problem I had with this was that I did not see anywhere in the description that the hubs and brakes were not already installed on the axle itself. I am used to ordering the axles pre-assembled so I was not ready for that since the picture shows a complete assembly. I bid the job out thinking it was that way. So I could not charge for the labor to put it together. All in all it was good, I just have to remember next time that there will be work getting it ready for install on the trailer.


Best price and very quick delivery.

great employees and service.

Thank you.


Great product, is working just fine.


The US made Dexter axle was worth the wait. The shipping through UPS was not the best experience for getting heavy items to Alaska. etrailer customer service was great at resolving the issues with UPS.


Great product!!! Easy installation....


have had for over a year, carry heavy loads, work great


Very good quality, arrived earlier than expected, thank you Molly for your excellent costumer service.


Every thing was correct and shipped in a timely manner


Received all parts quickly and correctly. customer service is excellent. Thank You.








The whole staff is top notch at etrailer, and easy to get ahold on the phone. Dexter is a quality product and etrailer offers it at a fair price. The only negative I can share is the plastic plugs they ship in the hubs folded the excluder lip backwards on the inboard hub seal. It took a little bit of working by hand to fix it. It's a blind install so can't see if it went on right. Would be nice to see a better plug used there or maybe just a piece of tape over it. That's on dexter though, not etrailer.


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.


I ordered 2 axles snd 2 fenders on Wednesday and parts arrived on Friday at noon. Estimated ETA was 5 days. Parts were shipped same day i ordered. Parts arrived in perfect condition. I am very impressed with the super fast service, as well as being kept informed of every step. This was my first purchase from etrailer but I will definitely use them again for all my trailer needs. My only gripe, which was my fault, is in only ordered 1 Ubolt kit but I ordered 2 axles. It stands to reason if I orderedc1 ubolt kit and 2 axles it may have been an oversight on my part and a phone call or email to check if I needed 2 ubolt kits would have been nice.
I highly recommend them.


This axle was exactly what I needed. There was originally a mistake in fulfillment as the axle I received did not match my order. Once the correct axle came I had no problems with installation.


Highly recommend! I first made the mistake and ordered from “the other trailer parts outlet” so it took 10 days from my order to receive missing and beat up broken China made parts. The other place didn’t want to replace but wanted me to repair at my time and cost. I called etrailer, ordered on Monday, received on Wednesday. No damage as they actually package the parts up correctly. I got brand name parts too. Lesson learned. If you are on the fence or shopping around. Save yourself 10 days, 5 phone calls and hassle. Shop etrailer first.


Installed a yr ago. Perfect product.
thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.

Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Solution for Needing Replacement Dexter Axle with Number 7658660 Part Number
    I am pretty sure that the axle you are in need of is a 7k axle that has 95 inches from hub face to hub face and 80 inches from spring seat center to spring seat center which we do have a replacement for with the part # 8327834. I would recommend you confirm this by measuring or it would be mentioned on the same tag as where you found the number you mentioned. The hub face dimension might be listed as HF and the spring center as SC.
    view full answer...
  • Replacement Recommendation for 7K Axle From Dexter Axle
    To replace your 7K axle from Dexter Axle you need part # 8327834 for a simple axle with just the spindles or part # 8327834-EB which is the exact same thing but with an electric brake setup and an 8 on 6-1/2" bolt pattern. I confirmed this with my contact at Dexter Axle. The spring center and hub face dimensions match what you have to this will be a pretty simple swap for the installation. Attached are installation videos of both axle systems for you to check out.
    view full answer...
  • Determining Correct Replacement Axles For 2021 Grand Design Solitude 390RK
    To know the correct replacement axles for your 2021 Grand Design Solitude 390RK you will need to know the manufacturer and serial number on your current axles, or you will need to measure your current axles from hub face to hub face and from spring seat to spring seat. I included a diagram that shows you how to measure your axles and a link to all of our axles for you to take a look at. Something to keep in mind is that upgrading your axles and suspension will not increase your GVWR, as...
    view full answer...
    Image 1 for
  • Replacement 7K Trailer Axle With 92 Inch Hub Face and 74-1/2 Inch Spring Centers
    The only 7K axles we offer with straight spindles are the Dexter # 8327834 axle you'd looked at and the same axle with brake drums/hubs, part # 8327834-EB. These axles have a hub face to hub face distance of 95 inches and a spring seat center to center distance of 80 inches. These axles could be safely altered so they'd work for you. Using this axle would only move your wheels out by 1-1/2 inches on each side which will not present a problem. The spring center distance isn't a huge deal,...
    view full answer...
  • Potential Problems From Damaged Trailer Spindle
    Trailer spindle and bearing tolerances are pretty tight, usually down to a thousandth of an inch. Use of emery cloth on a spindle to remove scoring damage might remove enough material to affect the fit of the replacement bearing. You can be off the original dimension by perhaps 1/1000th of an inch but not much more than that. If you have a precision caliper that can read to 1/1000th of an inch you can check that repaired spindle's diameter where the bearings ride (and use another undamaged...
    view full answer...
  • Offset Wheels Needed for 95 Inch Long Axle to Bring Axle/Wheel Width to 102 Inches or Under
    You're correct. If you use a zero offset wheel that has the mounting plate at the centerline of the wheel, installing 205/75-15 tires would add a total of 8 inches of width to your 95 inch # 8327834-EB axle would place you at 103 inches. Using a wheel such as # AM20766 which has a 1/2 inch positive offset would move the outer edge of both tires closer to the trailer by 1/2 inch each for a total of 1 inch which would place you at the 102 inch width you're looking for. I've linked you...
    view full answer...
  • Replacement Axle with 80 Spring Center
    We do have a selection of axles that use an 80" spring center and a 95" hub face that should meet your needs. You'll just need to choose the correct one based off of weight capacity: - 3,500 lbs # 7359765-EB - 5,200 lbs # e55SR - 6,000 lbs # 7461121-EB - 7,000 lbs # 8327834-EB Attached is a link to our selection as well as a video on axles for you to check out.
    view full answer...
  • Two Complete Axles 7,000 lbs With Electric Brakes for Horse Trailer
    We do have 7,000 lb axles that come with electric brake assemblies, and 8 lug drums included. You will simply want to check out the hub face to hub face length and the center of the spring seat to center of spring seat length. Here are the options: -Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB. The spring seats center on center are 80 inches. -Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 94"...
    view full answer...
  • Trailer Axles to Replace Mobile Home Axles on Car Hauler Trailer
    Mobile home axles are made for transporting such a dwelling only one time, to its permanent location. But they really are not suitable for ongoing use on a trailer. They simply are not made for that particular application, in the same way that passenger vehicle tires are not suitable for use on trailers. For safety reasons I recommend you replace the mobile home axles with actual trailer axles of the appropriate weight capacity for the trailer's GVWR. I linked our main page for beam type...
    view full answer...
    Image 1 for Image 2 for
  • Differences in the Dexter and etrailer 7,000 lbs Axles w/ 8 on 6-1/2 Hubs
    The Dexter item # 8327834-EB is the top of the line option and by far the best choice out of the two. The etrailer item # e83SR is our economically priced option for people who are on a budget or replacing an axle on an older trailer. The axles are similar but the hubs and drums are not as good as the Dexter ones. The brake pads and thickness of the hubs are where you get the additional cost and quality from. Dexter's brakes and hubs are far superior in construction and material. Both...
    view full answer...
  • Options for Adding Brakes to Sundowner Trailer with 7K Axles
    Adding drum brakes to a trailer that does not have them is usually least costly and easiest if you select electric rather than hydraulic drum brakes. Electric brakes need only basic wiring for installation and require a trailer brake controller in the tow vehicle, such as the Prodigy P3 # 90195. I linked a whole series of articles on the subject of adding brakes to a trailer. There are articles for electric, hydraulic and disc types. Many customers prefer to avoid the process of matching...
    view full answer...
  • How to Determine Correct 7,000 lb Axle
    There isn't an axle kit, but for the correct 7,000 lb axle, you need to know the dimensions of your current axle's hub face to hub face and spring center to spring center; I have added a link below to a video which walks you through how to measure. For example, the Dexter Trailer Axle w/ Electric Brakes # 8327834-EB measures 95 inches hub face to hub face and 80 inches spring center to spring center. It also includes hubs with an 8 on 6-1/2" bolt pattern, so you'd need a wheel with that...
    view full answer...
  • Upgrading 6,000 lb Dexter Axles to 7,000 lb
    There are a lot of great solutions to your problem, but to upgrade your trailer axles from 6,000 lbs to 7,000 lbs, you need to replace your axles entirely. Adding higher capacity hubs alone won't change the weight capacity of your axles. Note that even if you decide to upgrade your axles, you still might be limited by the weight capacity of your trailer frame or coupler as these could be rated less than your axle capacity. To upgrade your axles, I recommend a full kit that includes a 7,000...
    view full answer...
  • Does Dexter 3,500 lb Axle Come with Leaf Spring Suspension
    Wondering if they come with suspention or not
    view full answer...
  • What Size Spindle Does The Dexter 7,000LB Trailer Axle Come With?
    I see you were looking at the Dexter Trailer Axle Beam # 8327834 which uses a #42 Spindle # TRU37FR. This axle will allow for a Hub/Drum with Inner Bearing # 25580(1.75" inner diameter), Outer Bearing # 14125A(1.25" inner diameter) and Grease Seal # GS-2250DL(2.25" inner diameter). If this does not match your hubs and brakes we do have the Dexter Trailer Axle w/ Electric Brakes # 8327834-EB which will give you the same axle along with new hubs and brakes for an 8 on 6-1/2" bolt pattern wheel.
    view full answer...
  • Replacement Brakes Shoes For a Dexter D-70, 7,000lb Trailer Axle on a Sandpiper 5TH Wheel Camper
    A Dexter D-70 Trailer Axle # 8327834-EB will use the Dexter Electric Trailer Brake Kit # 23-180-181. The Replacement Shoe and Lining Kit # DX28FR contains the replacement brake shoes for one hub. Often times it is easier to just replace the brake assembly than trying to replace just the brake shoes. This also ensures that you have all new components.
    view full answer...
  • Recommended 7,000 lb Axle with Brakes for M105 Military Trailer
    To replace the axles on your M105 Trailer, you will need to know what dimension is the better fit. We have 7,000 lbs axle with electric brakes and drum assemblies that are 95 inches from hub face to hub face with 80 inch on center spring seats or 94 inch with 79 inch centers. We also have straight no drop or 4 inch drop axles. Here are your options: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" # 8327834-EB Dexter Trailer Axle w/ Electric Brakes...
    view full answer...
    Image 1 for
  • Axle Options for Converting Military Surplus Trailer to Electric Drum Brakes
    Military surplus trailers differ enough from RVs that it is often easier to just replace the original axle with a new one that comes with electric brakes, like 7K-rated # 8327834-EB. This 95-inch axle kit includes the axle beam, brakes, hubs, drums, bearings, races, seals, and mounting hardware. It will also make finding compatible wheels and tires easier well into the future. We also offer the Timbren universal-fit axle-less trailer suspension kits, such as the 3500-lb version # A35RS545E,...
    view full answer...
    Image 1 for
  • Can I Upgrade from 6 Lug to 8 Lug Wheels to Help Increase Weight Rating of my Trailer?
    Because the total weight capacity of your trailer is limited by the lowest rated component, your axle capacity won't be increased by adding hubs with more lug nuts to the equation-even if they are rated higher than the axle. Moving to 8-lug hubs sounds like you want to move from 5,200-lb axles up to 7000-lb axles. If this is the case, then we have a few options for you listed below; I've also linked below all of the 7000-lb axles we currently have available. Best Upgrade: Timbren Axle-Less...
    view full answer...
  • Solution for 72" Long 7,000 Pound Trailer Axle
    The Dexter Trailer Axle w/ Electric Brakes # 8327834-EB is not something you should attempt to customize yourself. Axle work like what you are describing should be done by an axle shop that has the proper tools to make sure it is correctly aligned and safe. Instead, I recommend using the Timbren Axle-Less Trailer Suspension System # TASR7KS01. This system fits any trailer width and also replaces/upgrades the suspension for the trailer. For hubs you could use the # 42866UC3-EZ and for brakes...
    view full answer...
  • How to Determine Frame Width When Building Trailer with 7K Axles
    I would be more than happy to help you get everything together that you need for the suspension on your gooseneck trailer for your tiny house! It sounds like you're needing the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB which has a hub face measurement of 95" and a spring center measurement of 80". This means that the frame of your trailer needs to be 80" apart so that your leaf springs will line up with your trailer suspension. When...
    view full answer...
    Image 1 for
  • Which Brake Assemblies Come with the Dexter Trailer Axle 8327834
    The Dexter Trailer Axle with Electric Brakes and EZ Lube Spindles # 8327834-EB uses electric brakes # 23-180 (left hand side) and # 23-181 (right hand side). These are manual adjustment brakes so you may also need the Brake Adjustment Spoon for Drum Brakes # W80630 and if you need to replace the brake mounting hardware you'll also need # BRKH12. If you wanted a self adjusting brake set, the # AKEBRK-7-SA would also work to replace those brakes and do a great job. They're going to be a...
    view full answer...
  • Adding Brakes vs. Replacing Axle on M105 Trailer
    Dexter left and right 12 x 2 electric drum brakes # 23-112 and # 23-113 include a parking brake and are rated for 6K axles. These use a brake flange with a 5-bolt mounting pattern; if you don't have these already they will need to be welded in place by a qualified welder with the correct jigs to align everything. They can be used with Parking Brake Kit # T2385200. These are compatible with most standard 12 x 2-inch hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO, such...
    view full answer...
  • Recommended Complete System Trailer Frame Down for Roadmaster Comfort Ride
    The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles # RM-2460-2580 will fit any 3 inch diameter axles. The closest rated 3 inch diameter axles we have are the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB. This axle comes with the hubs and brake assemblies so as long a 80 inch on center spring seats work for your trailer, this will be an excellent choice. You will also need the U-Bolt...
    view full answer...

< Previous

Do you have a question about this Trailer Axle?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Clayton O
Test Fit:
Clayton O

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924