bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 7000 lbs
  4. 95 Inch Long
  5. 80 Inch Long
  6. Spindles Only
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs

Item # 8327834
Our Price: $405.54
You Save: $22.87
Trailer Axles
Shipping Weight: 59 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs part number 8327834 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (658)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - 8327834

  • 7000 lbs
  • 95 Inch Long
  • 80 Inch Long
  • Spindles Only
  • No Drop or Lift
  • Leaf Spring Suspension
  • No Hubs
  • Dexter
  • Easy Lube Spindles

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: 14125A
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

8327834 Dexter Replacement Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 7,000 lbs

Customer Satisfaction Score:

Customer Reviews

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs - 8327834

Average Customer Rating:  4.8 out of 5 stars   (658 Customer Reviews)

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Check your order! I specifically ordered Dexter axles and they sent me generic ones.

Etrailer Expert

Brooke M.


Oh my goodness, I am so sorry! I see our customer service team has reached out to you and make sure we get the correct axle out to you. This one mustve been stored incorrectly in the warehouse by mistake and shipped out as the original part. We do carry Dexter axles and we will get you one sent.


working good

Dale S.


working good yet. been buying for e trailer for 5years years. very helpfull when asking questions.


You guys rock…
I think Dexter or your
shipping team would secure the backing plate mounting studs before shipping.
I received my shipment with a few studs missing otherwise I would definitely recommend these replacement axles.


Fast shipping
This is the 4th large
item I’ve purchased, first 3 went without a problem.
This one came just as fast, but the rubber protection was off the ends so there is surface rust and the lock clip was a little damaged, 2 studs for the backing plate were missing, nothing that could not be fixed or replaced. But this was probably the shipper.
Item to large to worry about shipping back.

Etrailer Expert

Jenny N.


To be honest I would say that this does happen time to time in shipping. I will have our Customer Service team reach out to you.


I can’t remember the last time I ordered something and it went as good as this did the best ordering and delivery I have ever had.


order it in one day got it 2 day later. it fixes great.


Shipping time was great! The only problem was the bottom plate hole spacing for the U-Bolts was not wide enough for my springs. I used the old plates and all went together fine.


Is very good


Works as promised. My only complaint is that one of the cages that holds the nut from backing off was lost in shipping, you could see that the axle had been dragged by one end. The spindle was not drilled for a cotter pin and I was in a hurry so ran to the local auto parts store and got a cage rather than even mentioning it.


Product was great and came fast.



Product is working fine with the project we have going. Fast shipping too


Great axle fit like a glove baby yea!!


Great product!!!!!!!!!


Great customer service and great delivery times. Even with the current shipping delays parts stock is good. We have been using for years for small trailer parts with no issues at all.


Tremendous service, product was exactly what I expected. Fast delivery.


Axel took 2 1/2 weeks to receive. When I received it was damaged broken grease fitting missing lock for nut. Missing 1 of 2 axel mount. Great price on axel.

Etrailer Expert

Jenny N.


It is certainly disappointing to receive the axle damaged when you have been waiting to receive it. I will have our customer service team reach out to you so we can have this taken care of for you.


Great service. Thank you. Missing parts were shipped fast and I was able to get the trailer together and back on the road.


Careful if it’s wrong…they charge over $XXX to ship back.


Quick delivery, easy transaction


eat customer service ever


worked great

Jack G.


still going strong and they dont baby this thing.


Dexter axles always perform well.

is a replacement for an axle that was bent. Turned very tight in a parking lot, dragging the front axle side ways. The tire dropped in a pot hole and got wedged so hard it bent axle and broke U bolts.

The trailer had 4 years of hard daily use before that. I'm sure the replacement will work well for many years as well, as long as I don't tear it up.


Just installed my axle but have not driven the trailer yet. I will say etrailers had great customer service and had my axle in less than a week.


This product so far was easy to install, I really haven't used it just yet I was waiting for the rest of the parts I needed. I am giving a good review on this company because of their customer service. Every time I have order from here their delivery is very fast, and if there are any problems with it they are quick to respond and fix it.


The prices were great, delivery on time, quality excellent, ordering &catalog part illustration made easy for do it yourself customers. Special thanks to the order taker very helpful. I. Highly recommend Thanks Fred


Great product and great service!

Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Solution for Needing Replacement Dexter Axle with Number 7658660 Part Number
    I am pretty sure that the axle you are in need of is a 7k axle that has 95 inches from hub face to hub face and 80 inches from spring seat center to spring seat center which we do have a replacement for with the part # 8327834. I would recommend you confirm this by measuring or it would be mentioned on the same tag as where you found the number you mentioned. The hub face dimension might be listed as HF and the spring center as SC.
    view full answer...
  • Replacement Recommendation for 7K Axle From Dexter Axle
    To replace your 7K axle from Dexter Axle you need part # 8327834 for a simple axle with just the spindles or part # 8327834-EB which is the exact same thing but with an electric brake setup and an 8 on 6-1/2" bolt pattern. I confirmed this with my contact at Dexter Axle. The spring center and hub face dimensions match what you have to this will be a pretty simple swap for the installation. Attached are installation videos of both axle systems for you to check out.
    view full answer...
  • Can Hub-Face Be Longer for Replacement Axle
    The hub-face distance can be longer than your current axle, but you don't want it to be shorter otherwise you run the risk of the tire sidewalls making contact with your trailer frame. So if the 95" long hub-face for the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327834 you're looking at is a little wider than what you currently have but the spring-centers are the same then you'll be good to go to use this as a replacement.
    view full answer...
  • Where Would Tandem Axles Install in Place of Triple Axle Trailer Setup
    To place tandem axles in place of a triple axle trailer will require you to position the center hanger for the tandem axles exactly where the center axle of the triple axle configuration. You can reuse the hangers and suspension you have now but it will require removing all of the hangers basically since everything will get shifted and some of the hangers won't get reused. Unless you are trying to reduce the cost of tire replacements I don't really see the benefit to lowering the capacity...
    view full answer...
  • Is Dexter Trailer Axle # 8327834 Same as 7256618
    The trailer axle # 8327834 is nearly identical to the axle you have with the exception of the spring centers being off 1/2 of an inch. Other than that the capacity is the same at 7,000 lbs, the hub face to face dimension is 95 inches. So this would work for you but you'd want to have the spring seats moved 1/4 of an inch out on both sides and you'd be set.
    view full answer...
  • How To Determine the Weight Capacity of a Flat-Bed Trailer
    The payload capacity of a trailer will take into account several variables such as frame strength, axle capacity, tire capacity etc. so I cannot provide an exact payload capacity for all dual/triple axle trailers. The only way to do this for a trailer is to find the gross vehicle weight rating (GVWR) which is the most a trailer can weigh. This will take into consideration both the weight of the trailer and how much payload you have. Therefore, if you know your GVWR you can subtract the...
    view full answer...
  • Troubleshooting An 18 Boat Trailer That Goes Off Center When Towing
    If the trailer is constantly pulling to the left, you will definitely want to check the axle alignment. Typically if the suspension is all stock, this would not be an issue. If any repairs or modification has been done, you will definitely want to be sure the axle and hubs are aligned. Inspect the axle for any damage. A bent axle tube or spindle could throw things out of alignment. You will also want to check your tires to be sure they are properly inflated and equally inflated on each...
    view full answer...
  • How To Determine Axle Rating Of Dexter Torsion Axles
    The best way to confirm the weight capacity of your Dexter Torsion Axles is to find the lot number on the axle tag which is located on the center of the axle on the rear side. This tag should say Dexter Axle and then a 9 digit number. The number you provided did not cross reference to any axles. Since the axles are not in the trailer the originally came in, this is the only way to be sure of the axle rating. If you know the owner of the trailer the axles came from you could also use the...
    view full answer...
  • Where to Measure to Pick Out Replacement Axle for Trailer
    You would need to measure from the hub face to hub face and then from the spring mount centers to pick out the correct axle to fit your trailer. I attached a picture that shows where these measurements are. I attached a link to all of the axles we offer as well.
    view full answer...
    Image 1 for
  • Measurements Needed to Take for Replacement Axle
    The measurements that you will need to take are from spring center to spring center and hub face to hub face. I have included a picture to help. I have provided a link to the axles that we carry so that you can see if we have a replacement for your trailer.
    view full answer...
    Image 1 for
  • What is Spring Seat to Spring Seat Dimension of Dexter 7k Trailer Axle 8327834
    The spring seat brackets on your trailer frame would need to be located at 80 inches on center for the Dexter 7k trailer axle part # 8327834 to fit. Otherwise if you were ordering a new axle the best choice would be to order one that has the same spring seat bracket dimensions as you have now so it would bolt right up.
    view full answer...
  • Replacement Axle for Quality Trailer Products Model TS70
    We have a 7k Dexter axle that would work perfectly to replace your Quality Trailer Products axle TS70, 7.0k rating, 95 HD80 SC with the part # 8327834 as it matches all capacities and dimensions. Your current hubs and assemblies would transfer over as well.
    view full answer...
  • How To Choose Correct Replacement for Mobile Home Axles
    In order to find the correct replacement axles for a trailer you need to gather some info on what you have now. This info would at the least be the capacity, hub face length (on center), and spring center length (on center). We do offer replacement solutions for more common capacities and length but not all, so custom ordering may be the only option. I have attached our complete axle selection below. The part # 8327834 for example has a 7,000 lb capacity, 95" hub face, and 80" spring...
    view full answer...
  • Upgrading a 5,200 lbs Axle to a 7,000 lbs Axle
    Yes, you can upgrade your 24' enclosed trailer's 5,200 lbs axles to 7,000 lbs straight axles. You'll need to upgrade your trailers suspension components, hubs, and wheels/tires. You will want to measure your current axle to ensure fit. I have attached a diagram detailing the dimensions of the Dexter Axle Item # 8327834 you were looking at. If you would like to email me your current axle and spring dimensions I would be happy to make some recommendations for you about the suspension, hub,...
    view full answer...
    Image 1 for
  • Info Needed to Pick Out Replacement 7k Axle for Trailer
    When picking out an axle for a trailer you'll need to know the overall length of it from hub face to hub face as well as the distance between the spring seat centers to pick out correct size. I also attached a link to a page with all of the 7k axles we carry. If you don't see the size you need you'd need to find a local trailer shop to you who can order in the correct specced axle.
    view full answer...
  • What is Acceptable Range Between Spring Seat and Hub Face for 7k Axles
    The generally accepted range for 7k axles like # 8327834 between the spring seat and the hub face is 13-18 inches.
    view full answer...
  • Kaufman Goosenecks Trailer Weight Ratings Questions
    You're correct. The reason your axles like # 8327834 can be rated less than your trailer's GVWR is because generally about 15 to 20 percent of a gooseneck trailer's weight is on the truck. This is actually pretty common with trailers although not as much as it used to be. How much weight are your attempting to carry on your Kaufman Trailer? I will be glad to assist your with this process.
    view full answer...
  • Replacement 7K Trailer Axle With 92 Inch Hub Face and 74-1/2 Inch Spring Centers
    The only 7K axles we offer with straight spindles are the Dexter # 8327834 axle you'd looked at and the same axle with brake drums/hubs, part # 8327834-EB. These axles have a hub face to hub face distance of 95 inches and a spring seat center to center distance of 80 inches. These axles could be safely altered so they'd work for you. Using this axle would only move your wheels out by 1-1/2 inches on each side which will not present a problem. The spring center distance isn't a huge deal,...
    view full answer...
  • Determining Correct Replacement Axles For 2021 Grand Design Solitude 390RK
    To know the correct replacement axles for your 2021 Grand Design Solitude 390RK you will need to know the manufacturer and serial number on your current axles, or you will need to measure your current axles from hub face to hub face and from spring seat to spring seat. I included a diagram that shows you how to measure your axles and a link to all of our axles for you to take a look at. Something to keep in mind is that upgrading your axles and suspension will not increase your GVWR, as...
    view full answer...
    Image 1 for
  • Replacement Dexter 7K Trailer Axle Options
    I do have an option for you but you'd need to do some measuring to confirm compatibility. The two options we offer are the Dexter 7K Trailer Axle part # 8327864 which measures 94" long (hub face to hub face) and the Dexter 7K Trailer Axle part # 8327834 which measures 95" long.
    view full answer...
  • How to Determine Correct Replacement For 7,000 lb Axles
    I recommend replacing your 7,000 lb axles with the same 7,000 lbs axles you had on your trailer, and to do this all you need to know is a couple of measurements. To determine the correct replacement, you simply need to measure from hub face to hub face and spring center to spring center on your current axles to get the right fit. There are two different lengths for Dexter 7k axles: - 95" Hub Face to Hub Face/80" Spring Center to Spring Center: Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...
  • Potential Problems From Damaged Trailer Spindle
    Trailer spindle and bearing tolerances are pretty tight, usually down to a thousandth of an inch. Use of emery cloth on a spindle to remove scoring damage might remove enough material to affect the fit of the replacement bearing. You can be off the original dimension by perhaps 1/1000th of an inch but not much more than that. If you have a precision caliper that can read to 1/1000th of an inch you can check that repaired spindle's diameter where the bearings ride (and use another undamaged...
    view full answer...
  • Replacement for 7k Lippert Axle That is 95" Long With 80-1/2" Spring Center
    The Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327834 will work as a replacement for your Lippert axle. The only thing that doesn't match up is the spring center measurement at 80". With only 1/4" difference on each side this shouldn't be a problem but it is better if it matches exactly. If you would rather make it 80-1/2" you could always cut off the spring seats and weld on # TRSS300 to match the Lippert.
    view full answer...
  • Installation of Idler Hub on 7,000 lb EZ Lube Axle
    I took a look at the installation instructions in regards to using a the nut retainer as opposed to a cotter pin and it specifies: "1) Finger tighten the nut until just snug ... Once in place the retainer/nut assembly should be free to move slightly. 2) If the nut is too tight, remove the the retainer and back the nut off approximately one twelfth of a turn and reinstall the retainer. The nut should now be free to move slightly."
    view full answer...
    Image 1 for

< Previous
123. . .4

Do you have a question about this Trailer Axle?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Installed by:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C
Employee Clayton O
Test Fit:
Clayton O

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924