Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
(107 reviews)
Price: $180.87
In Stock
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
Item # T3584F-8974
Retail:$190.36
Our Price: $180.87
You Save: $9.49
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (107)
- Q & A (0)
- Photos
- Why etrailer?
Dexter Trailer Axles - T3584F-8974
- 3500 lbs
- 89 Inch Long
- 74 Inch
- Spindles Only
- Leaf Spring Suspension
- No Hubs
- No Drop or Lift
- Dexter
- Standard Spindles
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center.
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight spindles - no drop
- Standard grease application
- Spring seats, brake flanges, and spindles are welded on
- Limited 2-year warranty
Specs:
- Weight capacity: 3,500 lbs
- Hub-face-to-hub-face length: 89"
- Spring-center-to-spring-center length: 74"
- Flange-to-flange length: 82-5/8"
- Tubing outer diameter: 2-3/8"
- Spindle size: 1-1/16"
- Bearings (sold separately):
- Inner bearing: L68149
- Outer bearing: L44649
- Grease seal: 10-19 double lip
- Outer diameter: 2.565"
- Inner diameter: 1.719"
- Brake flange configuration: 4 bolt
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
Dexters
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
T3584F-8974 Dexter Replacement Axle Beam - 89" Hub Face - 74" Spring Center - 3,500 lbs
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs - T3584F-8974
Average Customer Rating: 4.8 out of 5 stars (107 Customer Reviews)
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center.by: Carl08/23/2022
Great replacement axel for my home built trailer! Very knowledgeable sales staff, great help.
by: David McGinnis09/16/2017
I replaced both axles and tough lock and I also put a Jack on my trailer i purchased theses parts from etrailer they were a perfect fit i really like the parts it was easy to order from etrailer the people i dealt with were really helpful if i had any questions i will use etrailer in the future for my trailer needs I would suggest to anyone working on a trailer weather it is yours or not use etariler for your patrs
by: James08/29/2022
Great axle. Very pleased with it. I was shipped the wrong axle butt etrailer sent the correct one and I was able to ship the wrong one back later. Got me on the road a little quicker.
Other than that mishap,Ian pleased with the axle and would consider buying from etrailer in the future.
by: Al07/03/2021
Good product. Installed easily and fit perfect. I was amazed how fast the axle was delivered. Made it easy to get my trailer back on the road.
Thanks for your fast service and great product.
Comments
Working great!! No problems with it at all. Very good product.
Al J - 07/04/2022by: William 12/09/2022
Your website is ready to navigate. The items I order airways ship fast, thank you e trailer.
by: William 12/16/2022
Delivery was outstanding, but I don't know when I'll get to install them since I don't have a garage, come spring I will send you pictures, thanks
by: Jeffrey08/19/2022
Shipping was much faster than expected. Customer service was excellent and a representative reached out to modify my order for faster delivery due to an item being back ordered. A replacement item was selected and everything arrived soon after order confirmation. All items arrived well packaged and exactly as I ordered it. I would definitely order from etrailer again.
by: Zachary 10/03/2021
Great service! Axle was a perfect fit! Best store for trailer parts. I'm looking for fenders now. Guess where I'm going to buy them. That's right, right here. I suggest everyone do the same and save yourself the headaches of other stores backorder and bad customer service!
by: Robert 09/08/2022
very nice product and perfect fit thank you
by: Michael 09/30/2022
Items and the shipping was excellent. Very impressed.
by: Nick04/24/2022
Wiring running throught the axle is very nice. Overall very satisfied. Will be ordering another to replace my other axle soon
by: Robert 08/29/2022
arrived on time as ordered
by: Rodney03/25/2022
This was a brand new axle. It went right in place just as advertised. We put our hubs on and we are back in business.
by: Bob C01/06/2020
Easy to install with new ubolts and plates. Improved tire wear dramatically from old one.
Comments
Great
Bob C - 06/17/2021by: Tony H03/09/2017
I needed to replace a bent axle on my 16 ft dual axle utility trailer. The axle from etrailer.com was OEM and was a perfect fit. I've bought from etrailer.com before and will continue to do so. They offer great products at competitive price points with fast shipping and great customer service.
Comments
Thanks for the follow up.....just another example of etrailer.coms outstanding customer service. And, what a coincidence,......I was just on your website in the last couple of days looking at stuff for another trailer I plan to purchase in the next few weeks.BTW....I stand by my initial reviews....outstanding products, fair pricing, fast shipping, and outstanding customer service.
Tony H - 03/11/2018by: Dan 07/26/2022
great price, service, and shipping. videos very helpful, keep u the good work.
by: Dave 09/10/2022
Simply the best !
by: Curtis03/16/2021
The spring center spacing was 74" as advertised. However, the information page made it sound like using this for my 74.5" spring spacing would be no big deal. I did manage to get it to fit but I will be watching this closely. There should be a statement on all trailer axles that stresses the importance of proper spring center distance or explain what is all involved in changing the spring mounting seat location.
by: James06/14/2022
very good axle at the right price fast shipping
by: Gerard12/03/2018
The axle was great, but I SCREWED UP the leaf springs.They understood my deli ma and sent out the springs I should have ordered. Most pleasant people I have ever dealt with.
Everything ships quick
Comments
How sweet it is
Gerard - 12/04/2019by: Mike M.07/17/2017
Part was shipped and delivered in a very timely manner. Axle was an exact replacement for what I needed. Great service, quality product. Will definitely use etrailer again when the need arises.
Comments
The axle I purchased is still getting the job done !! Thanks for making a quality product.
Mike M - 07/17/2018by: Jarod 10/28/2019
Super easy to swap out with the old axle, the bearings fit the spindles perfect. The spring perches and the axle itself were straight, would and will purchase from again!
by: Joseph04/03/2020
Both the axle and u-bolt kit installed on my trailer with no hassle at all. This is the first time I’ve order from etrailer. My order came way before the estimated delivery date, which is great for all the DIY’ers. The only complaint/suggestion that I have is to put the torque specs with the u-bolt kits. Over all the product is great.
by: Kelly02/16/2022
great axle.....I wish I ordered it from somewhere else
by: Mark P.05/05/2015
The products are first quality manufacturers and service after the sale is always very good. The staff is interested and considerate when helping to solve any technical or installation issues.
They will also work with integrity to help you choose the correct equipment application for your needs instead of trying to sell you something that you don't need.
I have recommended etrailer.com to several of my friends.
25
107
Show More Reviews
See what our Experts say about this Dexter Trailer Axles
- Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ LubeBrake flanges on 3,500 lb axles are going to be the exact same between a Dexter axle and Lippert but sometimes the Al Ko options are different. I believe you are asking about the price difference between the Dexter 3,500 lb axles part # T3584F-8974 and # T3584F-EZ-8974 though which that comes down to the spindle style. The more expensive EZ lube spindle axle has a grease fitting on the end of it that allows you to easily pump grease into it whereas the other option does not and requires...
view full answer... - Replacement 3500-lb Trailer Axle for 2007 Spree by KZ Tandem TrailerIf your KZ Spree trailer's 3500-lb-rated axles are bent from damage or from overloading them beyond their weight capacity then they should be replaced. This will not only restore the trailer's handling but it will also prevent continued issues with uneven tire wear. Usually an axle that was bent from being overloaded will result in more wear on the inside edges of the tires. A new axle has a light upward bend that levels out under load. Our two 3500-lb-rated axles without hubs are displayed...
view full answer...
- Can I use a Rectangular Axle with Round Axle on Tandem Boat TrailerI spoke with my contact at Redneck Trailer Parts and he said that yes you can use a rectangular tube axle with a round tube axle on your tandem boat trailer as long as the hub base diameter and spring center diameter are the same. You will also need to add U-Bolts. I have included a link to all of our U-Bolt kits for your to check out.
view full answer... - Trailer Tires Showing Excessive Wear on Inside Edges of TreadTypically a trailer axle will have some camber in it - some bend - such that when it is not loaded the tops of the wheels bow outward slightly, with the outside edges of the tire treads making first contact with the ground. This allows that when the trailer is loaded with weight the axle will be pushed downward to a flatter position with the tire treads level on the ground. Please refer to the linked photo showing an axle and its camber. With your trailer unloaded look at it from the rear...
view full answer...
- How to Determine Correct Replacement AxleIn order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR of your trailer. For example the Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974 you referenced has a 3,500 lb capacity and measures 89 inches from...
view full answer...
- How To Find the Correct Axle Replacement for a Four Winns Tandem Axle Boat TrailerI would love to help but in order to find the correct replacement axle for your trailer or any trailer for that matter we would need you to measure the one you have now. The needed measurements are going to be from the face of each hub and then from the center of each spring seat. If the bad axle cannot be used as a reference you can simply take these measurements with the other axle on the trailer. I have then attached for you below a list of our trailer axles which you can sort by capacity...
view full answer...
- Can Wires on Replacement Axle be Used for Electric BrakesThe brown wires on the axle # T3584F-8974 can be used to cross your electric brake power from one side to the other. You'll need to get power and ground from the trailer's 7-way to one brake assembly and then splice in the brown wires on the axle, one to power and one to ground. Then connect each of the wires to the brake on the other side of the axle. The brown wires can also be used for brake lights instead of the brakes themselves in the same fashion but not both.
view full answer... - Information Needed to Choose Replacement 3500 lb Trailer AxlesWe do offer a limited selection of 3500 lb trailer axles. To determine if any of them would be compatible with your trailer, I'd need to know the hub face to hub face dimension and the distance between the spring seat centers. I'm not familiar with the bolt pattern you mentioned, are you sure it's not a 5 lug on a 4-1/2 inch bolt circle? If you're wanting to reuse your current hubs, I'd need to know the inner and outer bearing reference numbers, and whether the trailer has brakes. I'll...
view full answer...
- Castle Nut Torque Spec for Trailer AxleWhen installing the castle nut on the end of the spindle, there is no specific torque rating. The nut is ran down until there is no side to side play in the hub, and then backed off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle. If you click on the video link I provided, and fast forward to the 4:45 minute mark, you can see the procedure.
view full answer... - Locating Replacement Axle for Clipper 16RBD TrailerBased on my research, it looks like your Clipper 16RBD trailer should have a 3,500 pound axle, however I do recommend verifying this. In order to pick out a replacement axle, you will also need to measure the hub-face-to-hub-face length on the existing unit, along with the spring-center-to-spring-center length. For example, the Dexter Trailer Axle Beam # T3584F-8974 has a 3,500 pound capacity, an 89 inch hub face length, and a 74 inch spring center length. I have attached an image that...
view full answer...
- Can Tandem Axle Trailer Have Axles With Two Different Weight Capacities?It is a good idea for both axles on a tandem axle trailer to have the same rating. Even if the 6,000 lb capacity of your axles is rated high enough for your trailer, if you have a load heavier than 2,500 lbs sitting over your 2,500 lb rated axle it will not be able to handle it. I recommend replacing that axle with one rated for 3,500 lbs such as # T3584F-8974. This axle measures 89" from hub face to hub face and 74" from spring center to spring center. You will need to know those two...
view full answer...
- Replacement Axle for 1968 Shasta CamperI assume this is a replacement axle, so in order to choose the correct one, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added, with A being the hub face dimensions and B the spring center dimensions. For example, the Dexter Trailer Axle Beam # T3584F-8974 is 89" hub face to hub face and 74" spring center to spring center with a weight capacity of 3,500 lbs. Additionally, the axle may not be...
view full answer...
- Does Two Axles Rated for 7,000 lbs Equal 14,000 lbs Capacity?Yes, if your trailer has two axles that are rated for 7,000 lbs then they would have a 14,000 lb capacity. However, there should be an identifying stamp somewhere on the trailer that has its capacity on it. You would need to follow whatever the lowest rated component on your trailer is in terms of capacity.
view full answer... - Dimensions of Spindle on 3,500 Pound Dexter Trailer AxleThe spindles on the Dexter Axle # T3584F-8974 has the following measurements: A 1.75 inches B 1.719 inches C 1.378 inches D 1.063 inches E 1 inch
view full answer...
- What Does Dexter Trailer Axle # T3584F-8974 WeighThe Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974 that you referenced weighs 34 lbs.
view full answer... - How To Find Correct Replacement Axle for Forest River SurveyorI don't know what axle your trailer uses either unfortunately but if you can take a bit of time to measure the exact spring center length, hub face length, and note the weight capacity on the axle tag you can determine fit for yourself matching the above up with an option below such as the Dexter Trailer Axle Beam part # T3584F-8974 which has a 3,500 lb capacity and measures 89" at the hub face and 74" at the spring center.
view full answer... - How to Choose Correct Replacement Axle For TrailerI believe the video you are referring to is quite old and just an example on how to replace an axle; we don't offer a UGT axle, and you should also never use a mobile home axle on a trailer. The reason for that is mobile home axles are one-time uses designed to get a mobile home from Point A to Point B and that's it. I can tell you what you need to know in order to get a replacement axle though. First, you will need to know the dimensions of your current axle's hub face to hub face and...
view full answer... - How to Determine Correct Replacement Axle & Leaf Springs For Enclosed TrailerWe can help you determine how to find the correct replacement axle and leaf springs for your enclosed trailer, but there aren't specs for a 2005 6x12 trailer that we can offer. So let's start with the axle, and in order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle...
view full answer... - Picking Out Replacement Axle for TrailerIf only the axle is bent then you can go with just a new axle and reuse all of the other components like the hubs, bearings, brake assemblies, etc. To pick out the correct replacement axle you will need to get the hub face to hub face dimension of your axle as well as the spring seat center to spring seat center and the axle weight capacity. I don't have a way to look that up so you'd have to get me that info and I can see if it's an axle we carry or one that you'd have to order locally....
view full answer... - What Information Do I Need To Find A Replacement Axle For My Small Boat TrailerYou can check your existing axle to see if it has any information stamped or stickered to it with the rating, part number, and/or serial number. We can use this information to find out the necessary dimensions for a replacement axle. If you cannot find this information, you can measure the hub face to hub face distance, the spring center to spring center distance, axle diameter, and bolt pattern for this axle. Since you say this axle is on a small boat trailer, you probably have an axle...
view full answer... - How To Choose the Correct Replacement 3,500 Lb Axle for a TrailerIn order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did to help others...
view full answer... - How To Choose the Correct Replacement Axle for a Trail-Lite by R-VisionIn order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did to help others...
view full answer... - How To Choose the Correct Replacement Axle for a Trailer with Dexter AxlesIn order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did to help others...
view full answer... - No Replacement Hub Exists so How to Find New AxleI'm guessing that's quite a bit older, as a hub that uses those bearings does not exist, so you have to replace your axle. In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center, The other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR of your trailer. For example, the Dexter Trailer Axle # T3584F-8974...
view full answer...
Do you have a question about this Trailer Axle?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer axle information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
DeAnne T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Mike S
Installed by:
Jeff D
Video Edited:
Chris R
Video Edited:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.