bing tracking image
  1. Trailer Axles
  2. Timbren
  3. 3500 lbs
  4. Universal Fit
  5. Spindles Only
  6. Lift - 2 Inch
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K
Timbren

Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K

Part Number: TASR35HDS06
$1,286.49
Trailer Axles
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Designed for use with wide, off-road tires, this setup gives you more clearance and a smooth ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 2" lift raises deck height. Fits any trailer frame width. Great Prices for the best trailer axles from Timbren. Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K part number TASR35HDS06 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (311)
  • Q & A (0)
  • Photos

Timbren Trailer Axles - TASR35HDS06

  • 3500 lbs
  • Universal Fit
  • Spindles Only
  • Lift - 2 Inch
  • Rubber Spring Suspension
  • Timbren
  • EZ Lube Spindles

Designed for use with wide, off-road tires, this setup gives you more clearance and a smooth ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 2" lift raises deck height. Fits any trailer frame width.


Features:

  • Delivers a smooth, stable, quiet ride - regardless of load size
    • Jounce springs absorb road shock and support trailer's load
    • Rebound springs minimize body roll, rattle, and bottoming out
    • Built-in camber and toe-in reduce wear on your trailer's tires
    • Units work independently - what affects one side of your trailer won't affect the other
  • Eliminates axle beam to increase ground clearance and fit any trailer frame width
    • System replaces 1 trailer axle and suspension components
    • 2 Separate units bolt directly to your trailer's frame
  • Designed for your overlanding or off-road adventures
    • Long spindle accepts wide, off-road trailer tires
    • Robust, heavy-gauge steel construction is built to handle abuse
    • Black powder coat resists rust and corrosion
  • Raises trailer deck height for greater ground clearance
    • 2" Lift spindle is built in
  • Allows for simple bearing maintenance with built-in grease zerks


Specs:

  • Application: single- and tandem-axle trailers that use wide, off-road tires
    • Tandem-axle trailers require 2 complete systems
    • Not recommended for triple-axle trailers
  • Quantity: 2 suspension units (without hubs)
  • Weight capacity: 3,500 lbs
  • Brake flange configuration: 5 bolt
  • Bolt hole diameter: 5/8"
  • Suspension travel: 2-5/8"
  • 3-Year limited warranty


Tire, Wheel, and Hub Compatibility

  • Tire size: 35 x 12.5 x 20 or smaller
  • Wheel diameter: 20" or larger
    • This assumes a wheel with zero offset
  • Bearings (sold separately)
    • Inner: 25580
    • Outer: 14125A or 15123
  • Races (sold separately)
    • Inner: 25520
    • Outer: 142376 or 15245
  • Seal: 10-36 (sold separately)
    • Inner diameter: 2.250"
    • Outer diameter: 3.376"

Note: This Axle-Less system requires crossbeam support. If your trailer frame doesn't have a crossmember in place, you can retrofit it with one, or you can add a support by running a piece of 2" x 3" steel tubing through the square holes cut into these units. You could also add a steel reinforcement bracket to the inside of the trailer frame.


Get more ground clearance and a more comfortable ride when you're towing with Timbren's Axle-Less trailer suspension. This suspension system provides great shock absorption to comfortably get you where you need to go and to protect your precious cargo as you travel - even on rough terrain. With 2 independently operating units, you'll get better handling when making tight turns. And because this system eliminates your axle and has lift spindles built in, you'll get even greater ground clearance.


Timbren Axle-Less Suspension vs. Other Suspension Systems

There are many suspension options for your trailer or camper. So, what makes Timbren Axle-Less different?


Leaf Spring Example

Axle-Less systems are a definitive upgrade over traditional leaf springs, in part because they allow you to do away with your thru-axle, allowing for maximum clearance. As you've probably noticed, having a leaf spring suspension means that your axle will always hang at least a few inches below your trailer's frame, resulting in limited ground clearance. This may make it difficult to navigate off-road terrain.


In addition, while leaf springs do a great job of supporting an even load, they may cause your trailer to bounce and rattle when it's empty or to bottom out with a heavy load. And they don't offer any type of shock absorption for a smooth ride - unless you have upgrades built in. With Timbren's Axle-Less system, gone are the days of dealing with these annoyances - this suspension is designed for a quiet, balanced ride, whether your trailer's fully loaded or empty.


Torsion Axle Example

A torsion axle is a step up in terms of shock absorption, and it provides more clearance than a traditional, leaf spring suspension, but that crossbeam will still hang down some. And if your torsion axle gets damaged in any way, it can't be repaired - you'll have to replace the entire thing with a setup that matches your exact trailer frame width.


With the Axle-Less system from Timbren, you won't have a low-hanging axle beam to get in the way when you want to go off-road. The lift spindles on this setup will also raise your deck height, making navigating off-road terrain much easier. And the rubber springs and independent operation both combine to absorb shock and deliver a smooth, easy ride. In addition, the Axle-Less system can be easily maintained over time, and it will fit any trailer frame width, so you don't have to worry about potentially ordering the wrong size like you might with other systems.


Timbren Silent Ride Example

Another suspension upgrade on the market is Timbren's Silent Ride. This setup is a great option to reduce bounce and rattle because it has the same AEON rubber springs as the Axle-Less system. But the Silent Ride still requires an axle, so you won't get the same ground clearance or low deck height as you will with the Axle-Less suspension.


Timbren Axle-Less Suspension Parts

The Timbren Axle-Less suspension is designed with you in mind. All of the parts work together so you can tow your trailer comfortably - regardless of load size.


Timbren Axle-Less Suspension Parts Diagram

  1. The jounce spring supports the weight of your trailer and cargo. It easily absorbs road shock and is constructed of AEON heavy-duty, hollow rubber.
  2. The rebound spring delivers a smooth, stable ride - regardless of how much cargo is on the trailer. It controls the movement of the jounce spring to minimize trailer body roll, bounce, rattle, and bottoming out.
  3. The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame.
  4. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication.
  5. The E-Z Lube, 2" lift spindle is simple to grease. If damaged, it can be removed and replaced, saving you both time and money compared to a traditional axle.
  6. The built-in hole accepts 2" x 3" steel tubing (not included) to add support to your trailer's frame. The tubing sits higher than a trailer axle, providing additional ground clearance.

Installing the Timbren Axle-Less Suspension

Measuring Diagram

The first step in installing the Timbren Axle-Less suspension is to make sure that the mounting points for each unit are directly across from each other. The easiest way to measure this is to mark the desired mounting points on your trailer's frame. Then measure the distance between these points and the center of your trailer coupler. These measurements (A and B) need to be within 1/8" to keep your trailer frame square.


Once you have your mounting points lined up, you'll be ready to install the system. Drill 3 holes into your trailer frame at the desired mounting points. Then bolt each unit to the frame with Grade 5, 5/8" bolts (not included).


Keep Your Trailer Frame Square

Because Timbren's Axle-Less system eliminates your trailer's thru-axle, you'll have to find another way to get the crossbeam support that keeps your trailer frame square. You have a few different options to do this depending on your application and how much fabricating you're comfortable doing.


Crossmember Installation

If you're building a trailer, the best option is to begin building with the Timbren Axle-Less in mind and include a crossmember where you want to install the units on your frame. You can also retrofit an existing trailer with a crossmember.


Steel Tubing Installation

If you don't have a crossmember where you want to install the Axle-Less system (and you don't want to add one), pick up a section of 2" x 3" steel tubing from a nearby weld shop. This tubing will serve as a support to keep your trailer square. It will hang only about an inch down from your trailer frame, providing more clearance than a thru-axle.


After you've mounted both of the units to your frame, you'll need to drill 3 holes into the steel tubing and into the built-in, square holes. Then, insert the tubing through the holes and secure it with 3 bolts (not included) on each side.


Reinforcement Bracket Installation

The last option is to fabricate a reinforcement bracket that can be attached to the inside of your trailer frame and to the Axle-Less suspension. It may be a little harder to fabricate a compatible bracket than to mount steel tubing, but you may get additional clearance with this method.


Dimensions of the Timbren Axle-Less Suspension

The following diagrams show measurements taken on the Timbren Axle-Less suspension system.

Axle-Less dimensions front view

A B C D E F
14-5/16" 136-11/16" 1-1/2" 6-1/4" 5-3/8" 5"


Axle-Less dimensions top view

G H I J K L
5-5/8" 8" 5-3/4" 2-1/4" 3-1/4" 5-1/4"




ASR35HDS06 Axleless Trailer Suspension System by Timbren for Off-Road Tires - 2" Lift Long Spindle - Without Hubs - 3,500 lbs HD

Installation Details TASR35HDS06 Installation instructionsAlternate Instructions TASR35HDS06 Installation instructions




Customer Reviews

Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K - TASR35HDS06

Average Customer Rating:  4.6 out of 5 stars   (311 Customer Reviews)

Designed for use with wide, off-road tires, this setup gives you more clearance and a smooth ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 2" lift raises deck height. Fits any trailer frame width.

by:

We made an amazing creation out of those two axle-less axles.
We made a large fuel cell that is used for offroad use and it has worked excellent this entire time.
They are really great products and we would love to work with them again.
Actually, we do a ton of social media stuff and youtube and if you ever have interest in sending us products to build content around, I would love to have the opportunity!
Thanks,
Michael Brandt
Garage Bound, LLC (On Youtube and Instagram and all the other socials)



by:

We buy a number of things from E trailer and have always found there support and online cataloging very helpfull.



by:

Very smooth ride. Still working to fine tune the alignment but seems like a solid suspension system.



by:



by:



by:



by:



by:

Very smooth pull. I'm very impressed on how the trailer pulls. My traditional axle trailer seemed to bounce a lot on the highway which made a lot of noise, but with the Timbren Axle-less that I installed on a new trailer, the trailer is so smooth and way less noise.
Great product.



by:

Installed the Timbren Axle-less suspension a little over a year ago and approximately 5000 miles ago. I have been extremely satisfied with the installation and performance thus far and have had no issues. I also chose to install an optional crossmember for more strength using a 1/4" thick piece of 2x3 steel. I had to increase the weight capacity of my campers suspension due to renovating the interior completely and adding more weight. I also strengthened the frame to accommodate the extra weight. In addition to installing the Timbren 5200LB system I installed new 12" electric brakes and upgraded to 225/75R15 tires with E load range rating.



by:

I am satisfied with the overall craftmanship of the product. But I was disappointed with the welding on the spindles. none of the weld splatter was buffed off, and the welds looked gobbed on, unlike all the other welds which look good.



by:

The axle-less suspension worked very well for my boat trailer. The suspension was easy to attach to the trailer frame and provided a lower profile than the traditional leaf spring and axle system.



by:

The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.



by:

Huge improvement over the factory leaf springs. The suspension is so nice and quiet, I forget I’m towing. Very rust proof as well with many dips in saltwater with no signs of oxidation. Not the easiest to install but it’s nice to have the option to either weld or bolt on and replaceable spindles insure the suspension will likely outlast the rest of the trailer.



by:

Purchased 2 sets of the Timbren 1200 Axle-less systems for upgrading the suspension on an older 30' ft glider trailer. Single axle with small (13") tires made towing tough due to porpoising, dragging on drive entrances do to poor flotation; also German made and metric, no repair parts. GVW 2000 lbs equated to bouncy ride.

Dual sets now allow the trailer to ride over bumps and sharp inclines easily, smoothly, little bounce on country roads; porpoising is history. My glider now rides securely, safely, quietly.

Install time 4 1/2 hours (includes head-scratching). Results are outstanding, units are totally solid. Recommend the square tube interconnect, easy and quick - trailer frame was on the light side, so a precautionary fix. Clean look underneath.

Ordered 5 wheels w/tires, very nice.

Helpful neighbor so impressed he ordered a HD single set for his new DIY snowmobile trailer.

Customer satisfaction 100%, from phone order, online support, product information, immediate shipping, install instructions, followup... HIGHLY RECOMMENDED!



by:

The service from etrailer has been great! They have been very helpful through the entire purchasing process. My one star is due to the quality of the product. First, for something as heavy duty as these are, you’d expect better packaging. On arrival, one of the spindles was sticking out of the box and the hand holds were torn on one of the other boxes. I was a little worried what I might find in the damaged box but everything seems to be intact. The disappointing part is the quality of the welds. For the price you are spending on these, I would expect a higher quality of fabrication. There is undercut in the welds that hold the three support plates together and big ol sloppy welds every where else. Unsure of what to do as my trailer has been designed around this suspension system.



by:

Trailer suspension and disk brake performance is outstanding big big difference over leaf spring and electric drum brakes.
Installation required modifications to the frame to monut the timbren suspension



by:

I purchased the 3500 lb. set w/4" drop. Wish they made a 2" drop. Install was fairly easy, but most of your time will be consumed with alignment measurements, acquiring shims, and making adjustments. I was lucky to have a very square trailer frame. However, the "slop" in the all of the mounting bolts (especially, the spindle mounts) is more than the 1/8" window they specify. You will want to preload all bolts before tightening, and then measure for alignment/toe-in. The units are supposed to have camber built-in, but it's not near enough (more shims). Also, this suspension has more travel then the documents indicated. I had to re-mount my fenders 1" higher to keep the tires front hitting. When fully loaded, you might have 1" of travel left. All that being said, the ride is better than I anticipated. It's less bouncy than a torsion axle, and very quiet. If I was building a trailer from scratch, I would use this system, again.



by:

I used these axles in a different way than most would. I needed a trailer that was small, could handle tight switch-backs, carry 600 lbs and be light. I had this idea and as a retired design engineer I saw a great possibility in this axle. I have made four of these trailers now, one as a camp trailer, 2 for trail work for State Parks and one as a utility trailer.



by:

I rebuilt a 4 x 8 trailer using the Timbren Axle-Less Trailer Leaf Spring Suspension and it works great. I would recommend it to others.



by:

They have more pros than cons, but the second set I bought broke the flat plate that holds the spindle at about 8 months. The steel quality seemed less than I would expect since it basically peeled it back like a pop can as you can see in the pictures. Otherwise I like the clearance and ride. They last 2-3 years where the torsion axles I replaced would wear out in 4 months after driving down rough gravel roads. There is a grade zerk on the underside which I didn't realize until I bought the second set. That would have helped the first set last longer had I known about it.



by:

It is important to know that your wheels are going to sit very tight to the trailer frame. I needed to add an extension to the hub for it to clear the sides of the camper I built.



by:

These units install easily, are well made, and perform great! The trailer doesn't bounce around like you see a lot of trailers do while traveling down a bumpy road. I traveled some unpaved roads with no issues. I am certainly glad I went axleless. I installed with 15" tires. Problem is I didn't go big enough.

I intended to install on an existing trailer that I had. Changed my mind and built a new trailer. The new trailer came in heavier than I had planned. 2k pound capacity is now too small. I have to watch what I load the trailer with so I don't over load the suspension. I intend on buying the 3500 pound units when I have the money.



by:

Timbren saved our RV road trip! The leafs on the axle on our 2018 Jayco TT came apart while driving in Maryland. We tried going to the manufacturer, but they were useless. Going to a RV mechanic meant being grounded for at least 2 months. Then we found Timbren. With the help of Timbren's excellent staff we purchased axle-less system through etrailer, who made sure we got as quick as possible. It came ahead of schedule, my husband installed the Timbren system and we were back on the road! The axle-less system is better than the original manufacturers. If you plan on taking your RV or TT farther than 100 miles GET THIS INSTALLED and get it through etrailer.



by:

This suspension system did EXACTLY what I wanted. I replaced the leaf springs, axle/hubs on my small trailer. The new suspension improved the capacity, lowered the bed 4+inches, improved ground clearance and allowed me to rebalance the trailer all WITHOUT having to have any welding done. Everything needs to be measured very exactly and the alignment technique is fairly cumbersome and takes a bit of time. In the end, I have a quiet, steady, strong, low riding trailer. What more could you ask for



by:

The order came in on time and the customer service at etrailer.com (Ashley) and Sean from Tmbren was outstanding. They both were very helpful in my choosing the right product for my needs. The axle less suspension's performance is absolutely superb. It vastly improves ride quality. I am using it on a teardrop camper that often goes on gravel roads and the raddling sound from the leaf axles was horrible. A couple of points to consider before you settle on the axle less suspension: keep in mind that you will lose some hight of the trailer. While you will gain clearance from the lack of the axle, the suspension will make the trailer sit lower than before.i had to lower my hitch by an inch to maintain the trailer leveled. Also it does appear to compress at higher rate than the leaf springs, which makes it softer but easier to reach it's limit. Overall this product is absolutely a must if you are looking to improve the safety and the quality of your towing.


25
309
Show More Reviews

See what our Experts say about this Timbren Trailer Axles

  • Brake And Hub/Drum Assemblies For The Timbren Axle-less Trailer Suspension # TASR35HDS06
    The Dexter Electric Trailer Brake Kit w/ Parking Brakes # 23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension # TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ and etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K use the same bearing and sizes but only the etrailer # AKHD-655-6-EZ-K has the correct size grease seal. For parking brakes we really don't have much of a selection besides the Dexter Breakaway...
    view full answer...
  • Replacement Axle-Less System With Lift for 2022 Forest River Rockwood Mini Lite Travel Trailer
    We do have an axle-less system that will provide your 2022 Rockwood Mini Lite with additional clearance. The Timbren Axle-Less Trailer Suspension System is what you need. Based on what I have found, you have 3,500 lb axles on your travel trailer. I recommend verifying this information to be sure. Assuming that is correct we have the following options: -Heavy-Duty 2" Lift Spindle - Standard Tires # TASR35HDS07 -Heavy-Duty 2" Lift Spindle - Off-Road Tires # TASR35HDS06 -Heavy-Duty 4" Lift...
    view full answer...
  • Recommended Idler Hubs for Timbren Heavy-Duty Axle-Less Trailer Suspension 3,500 lbs
    In order to add an idler hub (no brakes) to the Timbren Heavy-Duty Axle-Less Trailer Suspension part # TASR35HDS06 you'd need to use either the Dexter Trailer Idler Hub Assembly part # 8-213-5UC1-EZ which has a 6 on 5-1/2" bolt pattern or the Dexter Trailer Idler Hub Assembly part # 8-231-9UC1-EZ which has a 8 on 6-1/2" bolt pattern. Please note, if you go with the former you'll need a different grease seal, the Grease Seal part # GS-2250DL. I have attached some of our wheel/tire options...
    view full answer...
  • Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" Lift
    The hubs that fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 use inner bearing # 25580, outer bearing # 15123, and a grease seal with a 2-1/4" inner diameter. For regular hub use part # AKIHUB-655-6-EZ-K but if you are wanting to incorporate brakes then you want hub and drum part # AKHD-655-6-EZ-K with the brakes # AKEBRK-7-SA for electric or # AKFBBRK-7 for hydraulic. I have attached some installation videos that you can reference as well.
    view full answer...
  • Parts Needed to Add 6 Lug Hub/Drums to Timbren Axle Less Kit TASR35HDS06
    For a hub drum with the 6 lug bolt pattern you are wanting that fits the Timbren Axle Less part # TASR35HDS06 you would want the part # AKHD-655-6-EZ-K and then for self adjusting brake assemblies you'd want the part # AKEBRK-7-SA.
    view full answer...
  • Recommended Timbren Axle-Less Suspension System To Replace Dexter Torflex On 2011 Jayco Jay
    Because you have axles mounted with a Norco bracket, you will not be able to lift your axles. You can increase your tire and wheel sizes to give you a little extra height within the limits of your current system. My recommendation is to change your axles out and use the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR35HDS05. This will lift your axle 4 inches and give you the Aeon Rubber suspension. If you prefer a 2 inch lift, you...
    view full answer...
  • Recommended Timbren Axle Less System and Hub with 5 on 5-1/2 Bolt Pattern
    I have a solution for you but you'll need to use a different Timbren system. The item # TASR35HDS06 does not have a matching 5 on 5-1/2 lug pattern hub or hub and drum assembly. Instead you will want to use the Timbren Axle-Less Trailer Suspension System item # ASR3500S06. This system also has a 3,500 lbs capacity with a 4" lift instead of 2". This system will also save you some money. The item # ASR3500S06 4" lift will be great for an off-road trailer. For a compatible hub you will...
    view full answer...
  • Recommended Timbren Axle-Less Suspension W/ 8 on 6-1/2" Bolt Pattern For M101A2 Trailer
    I would be happy to help! There are a few different systems that will work with hubs that have the 6 on 5-1/2" bolt pattern, and the correct one will be dependent on the axle rating of your current axle. More than likely you will want the Timbren Heavy-Duty Axle-Less Trailer Suspension - 2" Lift Spindle - Off-Road Tires - 3,500 lbs # TASR35HDS06 which has 3500lb rating but uses larger 5200lb hubs so you can have the 8 on 6-1/2" bolt pattern you are wanting, and is designed specifically...
    view full answer...
  • Timbren 3,500 Pound Axle-Less Trailer Suspension System to Work with Hydraulic Handbrake
    We offer three heavy-duty off-road Timbren systems for 3,500 pound axles: Straight spindles # ASR35HDS01 2 inch lift # TASR35HDS06 4 inch lift # ASR35HDS02 I've linked our selection of hub and drum assemblies that will fit the Timbren systems so you can choose the correct bolt pattern.
    view full answer...
  • Recommended Hub/Drum for Timbren 3,500 Lb Axle-Less Trailer Suspension System
    The Timbren Heavy-Duty Axle-Less Trailer Suspension is offered with a straight spindle using part # ASR35HDS01 and a 2" lift spindle using part # TASR35HDS06. They both use the same brake mounting flanges but the bearings are different. The straight spindles use a 25580 inner/LM67048 outer bearing and the lift spindles use a 25580 inner/15123 outer bearing. For a braking assembly on either spindle I recommend the Electric Trailer Brake Kit part # AKEBRK-7-SA which are self adjusting brakes...
    view full answer...
  • What is Suspension Travel of Timbren Axle Less Kit
    The deflection or suspension travel that the Timbren Axle Less kit part # A35RS545E has is 1-3/4 inches. So from unloaded to fully loaded the suspension can move a total of 1-3/4 inches and the distance from the frame to spindle center would be 4 inches unloaded and then 2-1/4 inches loaded. The lifted version part # TASR35HDS06 has a total of 2-5/8 inch of deflection and would sit a total of 5-3/8 inches from frame unloaded.
    view full answer...
    Image 1 for
  • Timbren Axle-less Suspension System Regular Trailer Tire Compatibility With Off-Road Tire Spindles
    The Timbren Axle-Less Suspension System # TASR35HDS06 for off-road tires, does not mean you can't use regular tires. They have the brake flanges located for either regular tires or wider off-road tires to use. The spindles are slightly longer to allow for off-road tires if you so choose. Regular width trailer tires will work just fine on these spindles. I've linked the page to your other options if you so choose, but these are the only 2 inch lift available. There is a 4 inch lift...
    view full answer...
  • Replacement Axle Solution for 3,500 lb Torsion Axle
    While we don't have the exact axle you are looking for we do have the Timbren Axle Less kit part # TASR35HDS06 which is an axle-less design that basically attaches directly to the trailer frame. This has a 2 inch lift built into it as well to help with ground clearance.
    view full answer...
  • Replacing an 80" Long 4" x 4' Square Axle On A Sea-Doo Trailer
    We do have a potential option for you. I will start by saying that we do not carry a direct replacement for that axle, as we do not carry any square tube axles. The closest thing we have length-wise is the Dexter Trailer 5.2K Axle Beam # 8327816, which is 86-1/2" long, when measured from hub-face to hub-face. So this may be a bit too long to be a viable option. A better option is to go with an axle-less setup like the Timbren Axle-Less Trailer Suspension # TASR35HDS06. This system will...
    view full answer...
  • Recommended Timbren Axle-Less Trailer Suspension for Forest River R-Pod RP-177
    The gross vehicle weight rating (GVWR) of a Forest River R-Pod RP-177 is 3,728 lbs therefore I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension part # TASR35HDS06 which has a 3,500 lb rating. I do understand this is less than the GVWR but that's the case for nearly every trailer as you still must factor in tongue weight. This system will also provide a 2" lift and the ability to add larger off-road tires. I have attached for you below new brakes and hubs/drums. Dexter Electric...
    view full answer...
  • Adding a Braking Axle to a 4x8 Trailer
    I do have an excellent option for you but it isn't a traditional axle. I recommend going with a Timbren axle-less system such as # TASR35HDS06 which takes the place of an axle beam. It will also replace the suspension with rubber suspension parts that won't wear out or corrode. This system and others do have brake mounting flanges. I wasn't sure which capacity you would want so the one above is rated for 3,500 pounds. Then you could use hub and drum # 8-201-9UC3-EZ and brakes # AKEBRK-7-SA. I...
    view full answer...
  • Idler Hub Compatible With Timbren Axle-Less Suspension System
    I can get you a hub assembly that fits, but the Idler Hub Assembly # 84655UC1-EZ will NOT work with the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06. Instead, you're going to need a hub and drum assembly with this suspension and the correct fit is Hub and Drum Assembly # AKHD-655-6-EZ-K. This assembly is compatible with the Timbren's EZ Lube spindle and uses the correct inner bearing # 25580, outer bearing # 15123 and grease seal # GS-2250DL
    view full answer...
  • Can Timbren Axle Less System # TASR35HDS06 be Used with Standard Pressure Trailer Tires
    The Timbren Axle Less system part # TASR35HDS06 that you referenced can work on trailers that use standard style trailer tire pressures. Since this kit was designed for the off-road enthusiast it is capable of being used with the low pressure off-road tires but realistically it will work just fine with your tires as well.
    view full answer...

Do you have a question about this Trailer Axle?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Ryan F
Updated by:
Ryan F
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.