bing tracking image
  1. Trailer Axles
  2. etrailer
  3. 3500 lbs
  4. 95 Inch Long
  5. 80 Inch Long
  6. Spindles Only
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs

Item # e83GR
Retail:$342.86
Our Price: $326.27
You Save: $16.59
Trailer Axles
Shipping Weight: 42 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from etrailer. Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs part number e83GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (156)
  • Q & A (0)
  • Photos

etrailer Trailer Axles - e83GR

  • 3500 lbs
  • 95 Inch Long
  • 80 Inch Long
  • Spindles Only
  • Drop - 4 Inch
  • Leaf Spring Suspension
  • No Hubs
  • etrailer
  • Easy Lube Spindles

Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
  • 4" Drop, Easy Grease spindles
    • Lowered axle beam provides lower deck height for easier loading and unloading
    • Patented welding process prevents spindle failure with 40% stronger welds
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • CSA, QAI, and SAE-N certified
  • Lifetime technical support from the experts at etrailer.com
  • Made in the USA


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Axle diameter: 2-3/8"
  • Spindle drop: 4"
  • Spindle/hub compatibility:
    • Bearings: L68149 inner, L44649 outer
    • Seal: 58846, inner diameter 1.719"
  • Limited lifetime warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


etrailer Axles

etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



e83GR etrailer by AxleTek Replacement Axle Beam - 4" Drop - Easy Grease - 95" Hub Face - 80" Spring Center - 3,500 lbs





Customer Satisfaction Score:


Customer Reviews

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs - e83GR

Average Customer Rating:  4.8 out of 5 stars   (156 Customer Reviews)

Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

by:

Very easy installation. Everything fit perfect.

Tom

11/20/2023

The new axle solved the tire wear problem. I hit a pothole on Hwy 18 the shook the motorhome so bad I stopped and checked all the tires. Tells you something about Washington roads. Everything looked OK. But after 300 miles the left front tire was worn out. I have about 5,000 miles on the new axle and the tires still look new. The axle was very easy to replace.

Etrailer Expert

Mike L.

11/20/2023

@Tom A bent axle will certainly cause uneven tire wear, we're glad the replacement is working well for you!


by:

I needed to replace my 3500lb drop axle. etrailer.com website is easy to navigate. I found a new axle, the price was reasonable, free shipping, it arrived in a few days and fit perfectly. I’m totally happy with the axle and the service I received from etrailer. I will definitely use them again.



by:

Very good product



by:

Arrived quickly was easy to install, has been going strong for a year now.



by:

Excellent and delivered faster



by:

matches what I have and Arrived overnit e.



by:

Richard

1/7/2024

After a year of use and abuse the trailer still rolling straight, not a single issue .



by:

Bolted right in. great fit. Shipped fas t.



by:



by:



by:

Great



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.



by: 11/30/2023

Welds looked good however the assembler failed to rotationally align the weld on spindle/brake mounts properly. One was about 3 degrees off and the other side was an 9.5 degrees from the 12 oclock position. Not sure about the thickness of the tube. Kind of strange to look at when the top of the brake system is not at 12 oclock. Found this after I removed the spring pads on this 2.1 degree camber axle so I had to jig the tube to fine zero toe to locate the new pads as the 2.1 camber tube changes wheel alignment depending on the bend/ springpad relationship. Not sure the AVG JOE is going to be able to move the spring pads when the brake mounts can't be used as a reliable ref point. If the toe is off from improper pad rotational location. the trailer will eat tires at best or worse cause a loss of controlled tracking and someone could get get killed.



by:

So far performing well. Have not been able to use trailer yet as much as I wanted to, don't use the grease nipples. Its easy to regrease without.


25
155
Show More Reviews

See what our Experts say about this etrailer Trailer Axles

  • Diameter of Trailer Axle Beam with Easy Grease Spindles e83GR
    The Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long # e83GR is a standard 3,500 lb axle. This means that the axle tube is 2-3/8" in diameter.
    view full answer...
  • How to Figure Out Which Trailer Axle Will Fit My Trailer
    Though we should have a replacement axle available for you, I was unable to find any info on what came on your 1987 Pacific Trailer, unfortunately. With that being said, you will need to find a few things. First you will need to measure from the center of one spring seat to the center of the other and then from hub face to hub face. This will get you the needed lengths, but you will need a couple more things to find the correct one. Next will be the capacity needed. We have axles rated...
    view full answer...
  • Recommended 3,500 Lb Dexter Axle 94" Long at Hub Face
    The best option we have for you with the specs you mentioned is the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 which has a 3,500 lb weight capacity and measures 95" long at the hub face and 80" at the spring center. The hub face is measured from the outermost face of each hub from one side to the other and the spring center is measured from the center of one to the center of the other. The spring seats however can actually be moved where you need them via cutting the...
    view full answer...
  • Recommended 3500 LBS 95" Axle and Replacement Spring Seats for a 78" Spring Center
    I have a solution for you but it will involve moving your spring seats. We have a 95" axle with a 3,500 lbs capacity but it has an 80" spring center. It is the Dexter Trailer Axle Beam with E-Z Lube Spindles item # 7359765. You can easily remove the spring seats and replace them with the item # TRSS238 and place them at 78".
    view full answer...
  • How to Determine Correct Replacement Axle For Boat Trailer
    There are individual parts you can use for your boat trailer but no type of suspension rebuild kit, no. Starting with the axle, to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center; I have added a link below to a video which walks you through how to measure. The other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR...
    view full answer...
  • Does the etrailer Trailer Axle Beam with Easy Grease Spindles # e83GR Have Brake Flanges?
    The etrailer Trailer Axle Beam with Easy Grease Spindles # e83GR does have brake flanges which will allow you to add brakes at any time. It does not come with a hub so you can choose a set of idler hubs like the Dexter Trailer Idler Hub Assembly # 84545UC1-EZ which has the more common 5 on 4-1/2" lug pattern, or go ahead and install the brakes and hubs now. If you need help selecting the correct hub and brake assemblies please let me know what wheel lug pattern you want to have and...
    view full answer...
  • Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
    It appears that the #84 E-Z Lube Spindle # TRU87FR is the correct spindle for your axle. You can confirm that this is the correct part by verifying the measurements of the spindle and brake flange. The landing for the grease seal is 1.719, the inner bearing is 1.378" and the outer bearing is 1.063". The brake flange bolts are 2-7/8" on center vertically and horizontally. This will also have a grease zerk allowing you to more easily fill your spindle and bearings with grease. Depending...
    view full answer...
    Image 1 for
  • Recommended Timbren Axle Less Kit For Travel Trailer
    Though we do not carry torsion axles on our site I do recommend switching to The Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 pounds # TASR35HDS04. This system will replace your current axle and suspension system and is a good alternative because we don't carry torsion axles and the right size is not available. The Timbren system fits any frame width and can be bolted on or welded on for installation. The Timbren system has an easier installation...
    view full answer...
  • 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
    You will be able to keep your wheels and tires by selecting one of our axles from the list below. All have the 95" hub face with the 80" spring center. Two of the axles are Dexter and two are our etrailer brand with a straight axle and 4" drop axle option on both. All the axles are underslung which you can use the Over Under Kit # K71-384-00 to mount in an over-slung orientation. Dexter Trailer Axle Beam # 7359765 Dexter Trailer Axle Beam with 4" Drop # 7685269 etrailer Trailer Axle Beam...
    view full answer...

Do you have a question about this Trailer Axle?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video by:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Carrie F
Updated by:
Carrie F
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924