Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI Laboratories for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (300 Customer Reviews)
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.An excellent choice for my kayak trailer project. 2000# rated and a great match for the other components, springs, hangers and spring mounts.
I purchased two of these axles to replace my old square ones. They appear to be good quality but they arrived damaged. The grease fittings on the ends were smashed because packaging wasn't adequate. I've emailed back and forth and was shipped the wrong parts for replacement. In the end I was told I'd have to cut the spindles off and replace them. All I need is new grease zerks that thread on the ends of the axles. Be prepared to purchase these on your own because customer service is subpar on a remedy and the way they package them for shipping does not prevent damage.
Katrina B.
8/12/2022
Its a shame that the end zerk fittings have arrived damaged. We recommend that the most cost efficient way to correct this, would be to replace the zerk fittings with part # Gzerk. I have sent this information over to our customer service department for them to get into contact with you.
Axle and hubs worked great for repairing our boat trailer. Awesome customer service and follow-up!!
Lynda
5/22/2024
No issues and No problems. Great follow-up!!
the axle was good bad measuring on my part center to center holes was 1/2 inch off i had to lengthen the mounting holes, other than that (my fault ) it was great
The axle is of great quality, I had to have mine fabricated a bit to match the old spring seats.but I wouldn't hesitate to buy the axle. The shipping and customer service is top notch from etrailer. Excellent products, services and shipping...
Just what I ordered, had to modify to fit my 1720lb Harbor Freight trailer as far as the spring seats. I knew that going in so no big deal. Great help and info from the order person.
Matched it up with bigger tires and etrailer finders!!!
The original axle on my trailer suffered a catastrophic event, making it absolutely unusable. The replacement from etrailer fit like a glove and installed in a very reasonable amount of time. I couldn’t be happier.
Axle worked just as it should. The best things about this company are their selection, speed of processing and communication. The best customer service of any company. Ashley was extremely helpful and quick to answer my questions. Terrific service company
Easy assembly and works great
Would give it a 5 except one of the grease fittings was damaged in shipping. The axle should be shipped without the grease fittings attached. Shippers stand the axle on end, crushing the fittings on the end.
Jenny N.
4/13/2023
Oh I am sorry that the grease zerk fitting did not make it through shipping. I will have our Customer Service team reach out to you so that we can have it taken care of.
Great product
It’s going to workout great I was surprised how fast it came
Used as an axle on my wood splitter and it is really great. Makes it very easy to move around now.
Quality piece at a reasonable price, th anks!
After a slight delay on my part I finally completed my project. I owe the overall success of this project to Terri, and Lori..They were so great in assisting me with my return thus ensuring I finally ordered the right parts for my smoker. Quality of products was Excellent...
Excellent help from Lori and Teri BIG KUDOS Thanks,
Poor packaging for shipping of the axle. Was just rapped in thin plastic. Both ends were exposed. Not sure how nothing was damaged. The hubs came separately and boxed as expected.
The product was received as advertised and in good condition.
The price was competitive and service was exception.
I have purchased from etrailer in the past and will continue to in the future.
Fast and free shipping!
As far as expediting my order it was the best service ive had, i ordered my axle on sunday eve and it was ready to go that night. I wont be engaging my trailer project until spring but if its as good as other items i have ordered from etrailer then ill be very happy. Thank you
Excellent service, plus your website is really easy to find my parts that I was looking for it.
One of the easiest transactions I have done and fits absolutely perfect, thanks so much and will recommend etrailer for any parts needed. Fast shipping as well
Fast,easy, quality, priced right I can’t say anything else. Thank you.
Excellent product, easy installation!
Exactly what I needed and it takes a routine beating on the trails.
Works very wellness
Do you have a question about this Trailer Axle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
8/12/2022
I see that our customer service department is working on this with you. In order for us to better assist you, we will need some more information.