Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
(13 reviews)
Price: $20.21
In Stock
Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
Item # BB60010
Retail:$56.45
Our Price: $20.21
You Save: 64%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
Bearing Buddy Trailer Bearings Races Seals Caps - BB60010
- Seals
- Grease Seals - Double Lip
- 2.360 Inch O.D.
- 1.875 Inch I.D.
- Bearing Buddy
Minimize grease leakage and maximize the life of your trailer's grease seals by switching to this smooth-operating system. The high-quality neoprene seals ride on consistently greased stainless steel rings for easy, free movement.
Features:
- Maintains a smoothly operating grease seal system
- Reduces grease leakage caused by rough seal surfaces
- Lasts longer than typical grease seals by minimizing wear and tear
- Works with Bearing Buddy bearing protectors (sold separately)
- Bearing Buddy maintains grease pressure, ensuring smooth operation of ring and seal
- Constructed of high-quality, durable materials that can withstand high pressure
- Includes stainless steel seal ring; O-ring; neoprene, double-lip grease seal; and installation instructions
- Made in USA
Specs:
- Application: trailer spindles with L68149 inner bearing and Bearing Buddy models with 1.810" hub bore
- Grease seal dimensions:
- Inner diameter: 1.875"
- Outer diameter: 2.360"
- Seal ring dimensions:
- Inner diameter: 1.377"
- Outer diameter: 1.875"
- Kit includes all parts necessary for 2 hubs
The high-quality seal in this unique kit is made of neoprene, a flexible, synthetic rubber that remains stable even at high temperatures. Unlike typical grease seals, which wear as they ride along rough surfaces, this neoprene seal rides on a smooth, durable stainless steel ring. By using this grease seal set along with your Bearing Buddy bearing protector, you can be sure that the seal and ring always have adequate grease for fluid operation.
Note: If your axle spindles already have permanent, stainless steel surface rings, you do not need this spindle seal system.
60010 Bearing Buddy Spindle Seal Kit 10
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy - BB60010
Average Customer Rating: 5.0 out of 5 stars (13 Customer Reviews)
Minimize grease leakage and maximize the life of your trailer's grease seals by switching to this smooth-operating system. The high-quality neoprene seals ride on consistently greased stainless steel rings for easy, free movement.by: Todd P10/09/2019
I was extremely surprised with the positive response with their customer service, error on my part ordering the wrong part. Extremely quick delivery exchange (2days) living on the Canadian West Coast.
The brakes are doing their job great, easy installation using etrailer tutorial videos. Great company will use again.
by: Don 07/14/2022
This is for a boat trailer that is 49 years old and it is not easy to find the correct parts.
by: Gilbert 08/21/2022
Product is excellent. Getting correct size of kit is difficult on website. CALL them with your old race & cone size & numbers to avoid mistakes.
by: Dennis 10/30/2022
Happy it came as ordered
by: James Peltier06/12/2014
The product I ordered was correct. The installation went normal. I will recommend etrailer to everyone and will use this site again. Thx
by: Nathan 02/27/2021
Correct size, quality as expected
by: Ed12/03/2018
Everything worked as expected.
Shipped promptly.
Happy Customer -- Will shop again.
by: Bill 05/04/2017
All parts fit and performed as expected
by: LAKESIDE05/03/2017
GREAT CUSTOMER SERVICE. SHIPPING WAS FA ST.
by: Peter Kotlarek03/29/2017
Very helpful support staff.
by: Charlie08/20/2018
The item is what I expected.
by: Sung09/04/2022
by: Charlie 12/16/2021
13
13
See what our Experts say about this Bearing Buddy Trailer Bearings Races Seals Caps
- Troubleshooting Disc Brake Calipers that Don't Line Up with Rotors After Seal Saver InstallFirst thing you want to do is verify that you have installed the Bearing Buddy Seal Saver kit part # BB60010 that you referenced like the video I attached demonstrates. When properly installed the seal saver kit would not push the hub out any further preventing the brake mounting flange from installing properly. What I suspect is happening if the Seal Saver is installed properly is that you need to compress the pistons of the caliper more to allow it to slip over the rotor. Using a c-clamp...
view full answer... - What is the Difference in the BB60010 and the BB60002The Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy part # BB60010 has a seal outer diameter of 2.360" while the Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy part # BB60002 has a seal outer diameter of 2.560". To determine your needs measure the back side of your hub where the grease seal presses in and go with the set that matches your hub.
view full answer... - Need a Grease Seal With Inner Diameter of 1.845 Inches and Outer Diameter of 2.442 InchesWe offer a range of grease seals in various sizes. These can be seen on the link provided. You can select parts based on the seal inner and outer diameters or you can use the bearing number from your trailer to search for a grease seal. I have attached two photos, which show where such part numbers are typically found and where to measure the spindle and hub bore to obtain accurate inner and outer seal diameters. The trouble with measuring the original seals is that they may have been...
view full answer...
- Can Spindle Grease Seal Set # BB60010 Work on E-Z Lube Spindle Yes, as long as your existing hub uses the # L68149 inner bearing and the included grease seal matches the dimensions on your current unit (1.875 inch inner diameter and 2.360 inch outer diameter) the Spindle Grease Seal Set # BB60010 will work great on your E-Z Lube Spindle. You do not have to have a Bearing Buddy in place for this to fit and work well. It will provide you with a smooth operating grease seal system in conjunction with the integrated grease zerks on your spindles. I have...
view full answer... - Replacement Seal for a Vortex 81022 Hub on a 2006 Ranger TrailerWith your hub having a # L68149 inner bearing, the Spindle Grease Seal Set for LM67048 Inner Bearing # BB60007 will end up being a bit too small. However, we do have an option that will suite your needs better. The Spindle Grease Seal Set for L68149 Inner Bearing # BB60010 is designed to be used in unison with the # L68149 inner bearing and will fit your spindle and hub better.
view full answer... - Trailer Hub Grease Seal with Inner Diameter of 1.719 inchFor trailer hub seals that have an inner diameter of 1.719 inches the correct grease seal would normally be the part # RG06-050 which has an outer diameter of 2.565 inch.
view full answer... - Correct Seal For 2.562 Boat TrailerAfter running the numbers the Seal Set # BB60010 you were looking at is for the L68149 Inner Bearing or the 1.810 Bearing Buddy. I don't think that is what you're looking for. I found this Seal Set # BB60002 which is for LM48548 or L68149 Inner Bearing and also for a 1.980, 1.968 or 2.562 Bearing Buddy. The 2.562 matches the seal number you provide and this is the best match I could find on our site. I've included a video Randy made to help you with the install!
view full answer... - Bearing, Race and Grease Seal Kit for 3500 lb AxleWe sure do. You'll need the # BK2-100 which provides an L44649 and L68149 bearing assembly, a L44610 and an L68111 race and a 10-19 grease seal (same as the GS-1917 you mentioned). The tang washer and cotter pin are also included. Each kit provides part for one hub. For a tandem axle trailer, you'll need 4 kits. The Bearing Buddy bearing protectors are sold in pairs as part # BB24SR. For a tandem axle trailer, you'll need two pairs.
view full answer... - Replacement 171255 Grease Seal and Bearings For 1990 EZ Loader TrailerThe replacement 171255 grease seal for your 1990 EZ Loader trailer is part # 58846 which measures 1.719 inner diameter and 2.565 outer diameter for a 3,500 lb axle. We do not carry a Bearing Buddy grease seal kit that has the correct diameter seal. The Bearing Buddy kit part # BB60010 has a larger diameter seal that will not fit your spindle.
view full answer...
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
Expert Research:
Mike L
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Nathan
2/28/2022
Drove across the country with zero issues