Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336

See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• Difference Between RG06-050 and Timken TMK58ZR Grease Seal
  The only difference between the # RG06-050 and Timken # TMK58ZR is the brand and quantity. Timken is typically considered to be a high quality brand, particularly for their USA made bearings. The # RG06-050 comes with two seals so it is the better value. Outside of that, they are both the standard 10-19 grease seal you would find on your typical 3,500 lb axle.
  view full answer...
• Replacement Bearing Kit For A 3,500 Pound Axle With Dexter Vault System
  Hi Danny, Evangeline asked if I could get you helped out as she is climbing around the roof of an RV at the moment and couldn't get to a computer, so here I am. Let's get into it. Since you have a 3,500 pound axle with Dexter's Vault system, you are going to need our # BK2-100 bearing kit. This is specifically comprised of bearings, races, a tang washer, and a cotter pin, and a seal for your size axle/spindle. However, the Vault System does throw a small wrench in the preverbal spokes. The...
  view full answer...
• Replacement Wheel Bearings, Races, and Grease Seal For Dexter 3K Axle 410980-09
  Without having the exact serial number for your axle these are the bearings and seal your Dexter 3,000lb axle will most likely use. You will want to verify this with either taking apart one of the hubs or sending me your serial number on the axle tube. Inner Bearing # TMK56FR Inner Race # TMK95FR Outer Bearing # TMK29FR Outer Race # TMK55FR Grease Seal # TMK58ZR
  view full answer...
• Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
  Hey Dave, yes the Timken grease seal part # TMK58ZR is a replacement for what you have now. I would go with the Timken but we also do carry your exact part number replacement with the part # 58846.
  view full answer...
• Replacement Seal for Cool Hub on a 2000 Ranger Bass Boat Trailer
  Hey Mike, thanks for reaching out! I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal # TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end. I don't know what O-Ring sits behind your cap but if you can give me some dimensions I can see if we have one for you.
  view full answer...
• Recommended Replacement For A Sealand 210 RV Toilet
  Hey Chris, To replace your Sealand 210 RV toilet you'll need to measure your rough-in. This is the space from the flange bolts that mount the toilet to the floor over to the wall behind the toilet. Once we know how much clearance you have we can pick out the correct fit.
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?