bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. TruRyde
  3. Caps
  4. EZ Lube Grease Cap
  5. 1.98 Inch O.D.
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
TruRyde

2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1

Part Number: DC200L-DCRP
In Stock
$6.43
Retail:$8.94
You Save: 28%
Trailer Bearings Races Seals Caps
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
2" Lubed Dust Cap and Rubber Plug Great Prices for the best trailer bearings races seals caps from TruRyde. 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1 part number DC200L-DCRP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (428)
  • Q & A (0)
  • Videos (2)
  • Photos

TruRyde Trailer Bearings Races Seals Caps - DC200L-DCRP

  • Caps
  • EZ Lube Grease Cap
  • 1.98 Inch O.D.
  • TruRyde

2" Lubed Dust Cap and Rubber Plug


Features:

  • Fits EZ lube spindle
  • Construction: 22 gauge, zinc coated steel
  • Dimensions: 1.99" x 1.40" x 1.18"
  • Includes rubber plug


DC-200L + DC-RP 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1





Video of 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Review Replacement Race for 02475 Bearing

Speaker 1: Today we're going to take you through the rebuild process on a couple of hubs. We've got an idler hub, and here we've got a hub and drum assembly. Works with electric rigs, but this can also work for just standard discs, if you've got a disc brake style setup.Basically what we're going to show you is how to get all of the bearings out. How to remove the seal. How to remove the race's if they're damaged, then get them replaced in the proper manner. We'll show you how to use an easy loop hub, which we have here.The first thing we are going to need to do is, get the grease cap off the end.

It can have either a rubber plug in it like this one does, or it can be a solid metal cap.These are pressed fit in there, basically by tapping on them on the back side. To remove them, a deadbolt hammer is typically what we're going to use. We're just going to start tapping as we go around. You'll see a little separation start right here, and slowly it'll work it's way off.Now the next step's going to vary a little bit depending on your axle setup. Do you see this is going to have a keeper that goes around the nut.

And that prevents that from being backed off, or removed. A lot of times you'll have a castle nut, which will have just little tabs that stick off, and there will be a cotter pin that passes through it. Just depending on your application, you need to get the keeper for the nut off. This style we just kind of pry out. A cotter pin you would just remove of course.Once we have that off ...

We'll start to take off the nut here, and the washer that's in behind it. Now yours should look a whole lot more dirty than this. There should be a lot of grease packed in, and through the hub, this one's brand new. We thought it'd be nice to show you the components before the grease was on .. Of our washer that comes off.And then here we're going to have our outer bearing.

Continue to pull that. We're gonig to have our inner bearing here. That sits in the backside of the hub. And we didn't put it in yet, we will show you how to put it in. But a seal would typically be covering the backside here. We'll show you how to use a seal removal tool, or another tool. To get that pried up and out. To get an access to that inner bearing.Now for a drum style like this, that process for disassembly is going to be just the same. One thing to keep in mind if you're using a disc brake setup. You'll have to remove the caliper before the disc is going to come off.Now once we have the spindle exposed, as we said this is going to be really greasy. We want to get all the grease removed, and the first thing we'll do is inspect it. We want to make sure that it looks just like what we have here. Everything's nice and smooth. We don't see any kind of discoloration, or any marring on the metal. Indicating that our bearing's got hot.If you do have any of those symptoms, at this point it's time to replace those bearings. You don't want to repack them. Get new bearings, and put in there. You might have a bearing that's come apart in here. Another surface to ensure is in good condition, is where your seal is going to go. That helps seal all the grease inside of our hub. With a damaged or broken seal, that grease is going to seep out. Either out of the hub, or in this case into our brake assembly.Now if your axle has brakes, we're also going to check the disc. Make sure it doesn't have any issues, or your hub. And this is going to be a hub and drum assembly. The brakes are going to ride on this machine surface. You're going to check that for signs of excessive heat, discoloration, or cracking. And this is our magnet surface. We'll check that surface for the same issues.Now inside the hub regardless if it's a disc brake, it's a drum brake like this. Or just a standard idler style hub. You're going to have an outer race. Would be right here, it's a small tapered piece of metal your bearing sits in, and rotates on. That's basically the outer portion of the bearing.You have the same thing here on the backside. This is called the inner race. Now if those show any signs of wear, overheating, or cracking. Those are also something we'll need to replace, which we'll show you how to do in just a minute.Now, with your brake assembly exposed, if you do have electric brakes like we have here. It's a good idea to check all the components for wear, cracking, maybe missing pieces. Check your pad thickness to make sure those are in good shape. Basically if you have a non working brake assembly and you put everything back together, you're just going to have to take it apart and do it all over again to get back to the brake assembly. This gives you a really good option to be able to change them out.And most applications are going to use a four, or maybe a five bolt flange to hold them in place. And you'll just remove the lock nuts, or sometimes you'll have a hex nut with a lock washer. You want to remove those, and then simply slide your assembly off after you cut the wiring.The friction material itself should also be checked for any kinds of cracking, or overheating. If you have any grease inside the system at all, it's likely it's gotten on those pads. It's a good idea to get those changed. Now as far as the removal of the races go, it's going to be just the same whether we're using an idler style hub like we have here. A drum brake like we have here. You can basically see where the idler is, here in the middle of the hub. It's going to go all the way around there, and we just have this extra material here to provide our braking surface.Now if you're doing a disc brake style job again, it's going to be just the same here with the races living inside of the actual hub portion. You'll just have the discs there for the brakes to make contact. We're going to use this little bit smaller one, it's a little bit easier to manage to show you how to get these out. We've talked about where the races are. The outer here, the inner being closer to the inside, but on the backside of the race there's a little lip. That lip's meant to stick out just a little bit further than the hub, and provide us an area to put our tool on, and help to drive that out.If you look all the way through there on that inner race, you'll see that little lip that sticks out just from the hub slightly, and it gives us enough area to use our tool on. Now generally to remove these you're going to use a punch, similar to this. Some guys will use a screwdriver. Or a piece of pipe. If you have a piece of pipe that's small enough to fit inside of that diameter, you can take that down through and allow it to rest on that lip.Use our punch, and then just need a hammer. And we'll start working that out. We're going to tap all the way around. Kind of equally, and evenly apply the force to get it to come on out of the bottom for us.You can see now as it starts to come out there's going to be a little gap created between the hub and the race. And we can just keep going, bringing it on out. Then you can inspect the inside of the hub surface there. Make sure no damage or anything has occurred, and repeat that same process for the outer race if you plan on removing and replacing that one.Now in the outer flat edge, you can see we're going to have our tapered edge on this side. If we roll our race over to the flat side, typically there's going to be a manufacturers part number on there. That will help you identify which race it is, that you need to go back in your system. If those are rubbed off, worn off, if you can't read them. You can measure the outside, to outside diameter of the race here. It's a good idea to use a micrometer to get it exact.Now here's your basic micrometer. And again, the outside of the race is what we're going to need to measure. You want to go . I set the thickest point there. Looks like this one's going to be about 1.98. That's going to be the measurement you'll want to supply.Now while we've got this out, let's also look at the proper way to measure our bearing. Instead of the outside for the bearing, we need to measure the inside diameter. That's going to be pretty simple. Let's pull that out, find the largest measurement we can. Which here, looks like it's going to be 1.03. With that information, we'll be able to get the correct bearing, and the correct race, so they'll fit together properly and make a full bearing kit for us.Now here's the race, we're going to show you how to get this put back in. Basically just going to press fit inside of our hubs. We need to get it down on there. Kind of like that. And you'll have a couple options. A lot of times you're going to see do it yourself or at homer, just going to use a wooden block. Just place it on there. That's going to get you started, but at that point you'll struggle in getting it to go all the way down into it's seat.Now to take care of that problem, there are several seal drivers that are available. Seal and race drivers that are available out there on the market. It's designed to fit down inside of our race, inside of our hub and get it down there where it needs to go. This is part number ptw83020, has several different sizes, even if you have multiple trailers it's going to do the job.Now the side with the angle on it, is designed to fit down inside of our race. If we use the other side, that's going to be for driving your seal into place. Just want to hold it, and take it on in with your hammer. You'll see, you just want to insure that our race is all the way up against that line on the hub where it's supposed to mate to.Now when it comes time to pack your bearings you're going to have several different ways of doing this. You can just use your hand, is the traditional method. That's going to be the method probably reserved for the very occasional trailer work kind of situation. If you do it once or twice a year, probably get away with it that way.Next you would go to a, kind of a sandwich funnel style almost. If you look inside of there, you can see the bearing. It's located between the two pieces. Just use a grease gun. Start filling that with grease, and that's going to fill our bearing for us. And the third, with this one you're just going to place your bearing down and in. It should be pretty close to center. And then we've got our cone her that's going to go down and secure that.Now I think this style, wastes a little bit more grease than what this style will. This has a dust cap. You can see, you can keep your grease in there, put your dust cap on there and save it for later use. This will be if your going to do it every couple years. And this particular style would be if you're a more regular user.Let's start by showing you how to use a bearing packer. Similar to this. Again, we've just got our grease inaudible 00:11:07 here on the top. And then just slowly start to fill it. Now I like this style quite a bit. I think even regular users might enjoy it, because you can get a really quick visual look at that bearing. You're not going to have to overdo it, or have to much grease.You can kind of see in there now, we're starting to get grease to come out of it. Couple more pumps, we'll be good. You can see we've got grease coming out all the way around. Where all of our bearings are. Got a little bit of excess there. Just take that around the outside of it. And then we should be able to lift it off. And now you can see what we we're talking about. Just a little bit of excess there, that you're just going to wind up wasting.Now we'll take our bearing, we're going to place it right down in our race. And then we'll cap off the back with our seal. Right now our seal's going to fit in just like our race did. It's going to have a little bit of a pressure fit to it. Now very often in this situation, I see people using the four by four method. Kind of here, just placing that on and tapping it. As an option though, if you do have one of these. You can see that's designed to fit right on the top of the seal. And help drive it in.The biggest thing here is, just going to be getting it driven in squarely. You can see, this side's in a little bit further than this side. I'm going to start this side first. Now since we didn't have the opportunity to show you before, we're going to take a look at pulling a seal. Now this is a seal puller, we carry this on our website part number ptw1219. This is meant to hook underneath the seal. And then you kind of pull up on it, and just like our race you'll have to work all the way around that edge. Just bringing it out a little at a time.If you don't have that available. Another option would be a screwdriver. You just kind of get that under the seal, and turn it. And see, that'll allow you to also pop that out. We've taken care of our race. Our inner bearing. Our seal. The last component, before we put our hub back in place is going to be our outer bearing. Now with this bearing, I'll show you the hand packing method.This is definitely . Slightly dirtier method than the bearing packer. When we get grease on our hand we want to look at the larger side of the bearing. This is the smaller side. We have a larger side In between the inside and outside there's a gap. We can see our rollers in there. We want to grab that, and use that gap and shove grease inside of it. Now this is going to take a little bit, you want to work in the same spot until you get the grease pushed all the way through. We can see on the top there we've got a little bit starting to come through.And once we push it in the bottom, and you see it start coming out the of the top in those little drips, it's going to indicate that, that section's fully packed. Just need to work all the way around their outside edge now and do the same thing. Alright, once that's all the way around . The bearing will be ready for use.Now one more thing I like to do. We can see our inner bearing there, and our outer bearing. Well between the two, got a pretty big gap in there. If you'll take a . Pretty good amount of grease. We're just going to go all the way around. See how we can go all the way around the inside and just line that really well. The more grease we have in here, the less chance we have of any moisture getting in there, which can cause corrosion, rust, pitting. Pretty much things we do not like when it comes to bearings, races, and hubs.Put plenty of grease in there. And then this one does have the easy lube spindle, that'll even fill it in more. Now we can get our assembly slid on. I like to keep my thumbs on that outer bearing, just to prevent it from . inaudible 00:15:28 pushed off there. Now we can put on the original hardware that we removed, in taking off our hub the first time. In our case, we had our washer and our nut.Now most commonly you'll see pliers similar to this being used. We basically want to get that tightened down. Once it's fully tightened down you'll feel some resistance in the hub. We back it off just slightly. That'll give us a little bit more freedom of motion there. Something you don't want however . Is any movement in, or out on your hub. You want to be sure that everything is compressed, and you don't have what's called end play. Which would be the play in and out.Once we've got that set, then you'll put on whatever tight keeper yours came with. Get that put back in place. Now with an easy lube style hub, you're going to place your grease gun on the end, and then you can just fill the remainder of that hub up.Now for your typical applications, you're either going to have a solid cap, or a cap that'll have a rubber plug in it. A solid cap's going to be for an axle without the grease inaudible 00:16:51 here on the end. Goes on there. Just knock it on with your rubber mallet. Same with the one with the plug. Just gives you a removable area there, be able to cap that off.We'll show you how to put that on. Now as alternatives as well, a lot of times on boat trailers and marine kind of situations. You'll see a bearing buddy. This is going to apply a little bit of pressure on the grease, you'll fill it up. This kind of comes out just a little bit. That applies constant pressure on the grease to make sure we don't have any air, or anything like that. Then there is also an oil bath hub available. Now this is going to be for use with seals that are going to be designed specifically for oil bath use. You'll have to change that seal.We're using a double lip seal. There are also single lip seals available. Of course a double lip seal is going to give you just a little additional security. Keep that in mind when you order. But let's get this knocked on there now so you can see how that works. We just want to take the cap, we're going to center it. This is going to be very similar to what we did with the seal. And then just gently start tapping it around the outside. And it'll seep down on there for you.It's really going to be the same thing that you'll do with any of the end caps. Now with this side done, it's a good idea to take care of all the other hubs. Get them all on the same maintenance schedule. And as long as you'll periodically check the grease, take your trailer out for a trip occasionally. Just to keep everything lubricated. It should extend the life of these parts, and give us years of good service.

Customer Satisfaction Score:


Customer Reviews

2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1 - DC200L-DCRP

Average Customer Rating:  4.7 out of 5 stars   (427 Customer Reviews)

2" Lubed Dust Cap and Rubber Plug

by:

Ordered 15 Dust Caps 2/ rubber plug, all different sizes. I had 15 Dust Caps and plugs, thrown in 1 box. Not one is labeled, basically useless to me. Not happy at all.

Etrailer Expert

Jenny N.

6/14/2024

Yes, unfortunately the grease caps do not typically come with individual labels. The easiest way to distinguish between them will be to measure the outer diameter to determine their sizes.



by:

Great price and fast delivery (using the cheapest delivery option). Comparable part was available locally at TSC for more than double your cost including shipping!!

eTrailer is always there with a huge selection, outstanding technical info to ensure I'm ordering what I need, a great price, quick shipment, quality parts and the best customer service - thank you!

Jake

10/15/2023

Installed these on a boat trailer, immediately took the boat out of state and have used it many times sense with no issues. As always, eTrailer comes through with great options at the best prices. Thank you!



by:

Fit Perfectly



by:

I received the parts in a very short while and they are installed, and the trailer hubs are like new! Will always shop etrailer when I need parts. I was even sent installation videos.Great company!

William N.

7/24/2023

works perfect.



by:

Maybe they're tight enough to be waterproof but I would have thought they would come with some type of seal around the flange since They do get used on boat trailers.

Etrailer Expert

Jenny N.

8/3/2022

I wanted to reach out to you in regards to your review on the grease caps. I would not say that they are waterproof however they generally tight enough for a boat trailer. I did want to confirm that you do have the EZ lube spindles on your trailer.

Dennis B.

7/28/2023

I havent had any bearing issues, but grease them the first of each month and do get water out of the bearings. I do have the EZ lube spindles.



by:

Exactly what I needed. Great price. Kind of hard to find locally.



by:

Better than the OEM Dust Caps! And as always great customer service and support! Thanks etrailer.com and George J!



by:

Great quality



by:

worked perfect



by:

I hate to leave a poor review but I discovered this spring that all 4 of my dust caps are rusty on the inside after launching and hauling out my boat one time.
The rubber plugs don't fit tight enough.
I contacted customer service and was told those parts are only warranted for 90 days so I am out of luck.
Hope I don't have to replace all my wheel bearings now.



by:

Too small for the 7k axle. Could not use them.



by:

Easy to figure out the right part on the website and fast shipping. This was my fourth or fifth time using etrailer.com and I will continue being a regular customer.



by:

Product work well.



by:

The product is good, the shipment was fast, but it’s too bad they are just a bit small. Turns out I need a 2” not 1.99” cap.



by:

Recieved order fast perfect fit..I will recommend etrailer to all friends& family. Thanks



by:

fits great quick ship



by:

The exact items I needed were shipped immediately arrived on time just great easy service. Thanks. I will order again.



by:

Not what I was expecting. Lubed dust cap leads one to believe it has a grease fitting to lube bearings!!

Etrailer Expert

Jenny N.

3/20/2023

I wonder if you are thinking of Bearing Buddies? These caps are meant to be used with EZ lube spindles that have the grease zerk fittings built in. If you do not have an EZ lube spindle, then you can add a Bearing Buddie such as part # BB1980A. It would fit the 1.98 inch hub bore and provide the grease zerk to add grease to the bearings. Or if you are looking for a stainless-steel option part # BB1980A-SS is also available.



by:

Exact replacement, trouble free.



by:

Fast shipping. Perfect fit for my hub



by:

Axle grease caps; easy to install on my boat trailer. They have been on over a year, seal out the water and dust, no grease leaking out on the rims. Very happy with them.

Elaine K.

6/18/2018

Its been over a year and seals still look like new. I live on a gravel road and travel 30 miles to my favorite lake at least 2 times a week. No leakage of grease, no water in bearings. Would order these again.



by:

Best Price I could find for these, should of bought a few extra although I doubt they will ever fall out. The fitment was pretty extreme on my trailer, it took me a while to get one of them on but I dont think these caps have to do with that issue. It is good thought because they wont fall off. I did have one of the rubber ends rip after 500 miles of towing, not sure if too much grease caused it to rip or just got a fluke one. Would recommend order a few pairs of the just the rubber caps to keeps as spares in case this happens, you lose one, etc.

Etrailer Expert

Laura E.

11/28/2017

Great idea, Brian! The replacement rubber cap Item DC-RP can be found on our site, as well.



by:

Good prices and good parts



by:

fits perfectly and works well



by:

Interesting mix between a axle cover and buddy bearing . it really fills with a lot of grease jury’s out if I like them have done very little road work with the loaded trailer

Fp

11/12/2020

As advertised


25
427
Show More Reviews

See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps

  • Replacement Grease Cap and Center Cap For a 2020 Grand Design Imagine 2500RL Travel Trailer
    Based on the information and images I could find on your 2020 Grand Design 2500RL you will need the Grease Cap # DC200L-DCRP. This fits an inner hub diameter of 1.99" which is most common on your 3,500lb axles. For the center cap I recommend the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug # LHCS102-SI60C. This is stainless steel to prevent corrosion and chrome flaking. It has a removable plug to make it easier to access the grease zerk on the spindle.
    view full answer...
  • Grease Cap for a Kodiak Hub-and-Rotor Assembly
    For the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs item # KHR10D you will want the 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1 item # DC200L-DCRP if you need one or the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 item # RG04-040 if you need two.
    view full answer...
  • Replacement EZ-Lube Grease Cap for Kodiak KH84545S
    The correct EZ-Lube grease cap for the Kodiak # KH84545S would be the TruRyde 2 inch # DC200L-DCRP. This is made of 22 gauge, zinc coated steel giving it good corrosion resistance.
    view full answer...
  • What Bearing Buddy Fits The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K?
    The Bearing Buddy Bearing Protectors # BB1980A-SS are the correct replacement for the Cap # DC200L-DCRP included with our Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K.
    view full answer...
  • Replacement Bearing Kit ad EZ Lube Grease Cap for Lippert 136214 Hub/Drum
    According to my research your Lippert 136214 hub uses the same parts as a 3,500 lb hub so you need the following: - Hub Bearing Kit - 3,500 lb with #84 Spindle # BK2-100 - 2" Lubed Dust Cap & Rubber Plug # DC200L-DCRP You'll need 1 of each kit per hub.
    view full answer...
  • Replacement Interior Wear Components For Dexter 8-248 Idler Hub
    Your Dexter 8-248 Hub # 845475UC1 uses the following interior parts. Inner Bearing # L68149 Inner Race # L68111 Outer Bearing # L44649 Outer Race # L44610 Grease Seal # 58846 Grease # L11390 Depending of if you have a standard spindle or E-Z lube spindle there are different grease caps available. Grease Cap # F001518 standard spindle Bearing Buddy # BB1980A upgrade to standard spindle Grease Cap # DC200L-DCRP for E-Z lube spindle And finally there are different nut retainer based...
    view full answer...
    Image 1 for
  • What is The Difference In The Dexter Trailer Hub/Drum Assemblies # 84656UC3 & # 84656UC3-EZ?
    You are correct the only difference in the Dexter Trailer Hub and Drum Assemblies # 84656UC3 and # 84656UC3-EZ is the grease cap. The Kit # 84656UC3-EZ uses an EZ Lube # DC200L-DCRP cap while the other has a standard Grease Cap # F001518 spindles without a grease cap.
    view full answer...
  • Replacement Grease Cap With Rubber Plug For 3,500LB Trailer Axle Hub
    Yes, we do offer the Lubed Dust Cap & Rubber Plug # DC200L-DCRP which is the size used on the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ you are looking at. It will fit a hub bore of 1.98", if your hub bore for the cap is a different size please let me know so I can find you the correct cap.
    view full answer...
  • Does Grease Cap DC200L-DCRP fit Kodiak Hub/Rotor KHR10D
    Yes the cap part # DC200L-DCRP that you referenced does fit the Kodiak hub part # KHR10D that you also mentioned.
    view full answer...
  • Replacement Bearing and Seal Kit for a Dexter 8-248 Idler Hub
    The Dexter 8-248 is a 3,500 lbs idler hub which uses the # L44649 outer # L68149 inner bearing and a 10-19 grease seal. For bearings/races/seals, you'd need the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle item # BK2-100. If you need replacement dust caps, use item # RG04-020 for a standard spindle (sold in pairs) or item # DC200L-DCRP for an E-Z Lube spindle which is sold individually.
    view full answer...
  • How to Determine the Correct Size Grease Caps for a Southwest Kendall Trailer
    In order to determine the correct size grease cap, the best thing to do would be to take apart one of the hubs and get the outer bearing and race numbers. You can also get the hub bore inner diameter using dial calipers for the most accurate measurement. I have included a video on removing a hub below. This will determine the correct size you need whether it is the DC200L-DCRP, # RG04-040, or another size. I have included a link to our grease cap main page below. I went out to the warehouse...
    view full answer...
  • Replacement Bearing Kit for Reliable Brand H-1000 Series Hub
    I did some checking and your Reliable Brand, H-1000 Series hub is a 3,500 lb axle hub so for a bearing kit you would want the # BK2-100. For a dust cover you would then want the part # DC200L-DCRP.
    view full answer...
  • Replacement Dust Cap for Lippert 4,400 lb EZ Lube 176207 Axle
    I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap # DC200L-DCRP or get it in a 2-pack as part # RG04-040.
    view full answer...
  • How To Verify The Correct Size Hub Grease Caps For A Trailer Axle on Boat Trailer
    The best way to ensure that you get the correct size is to use a Digital Caliper # PTW80157 to measure the hub bore diameter on your 2007 Sea Doo Speedster trailer. The 1.98" hub bore is the most common size on the smaller axles found under boat trailers carrying the weight of your Sea Doo. The Grease Cap # F001518 is the basic cap for standard spindles in the 1.98" size. The Lubed Dust Cap & Rubber Plug # DC200L-DCRP fits your EZ lube spindles that have a grease zerk on the spindle...
    view full answer...
    Image 1 for
  • Replacement Axles for Boat Trailer With Tandem 3500 lb Axles
    Although we can get pretty close to the dimensions you mentioned, we don't offer an axle that matches the hub face distance exactly. The closest match would be # 7359765 which has a 95 inch hub face to hub face distance. Going with this axle would extend each wheel an inch and a half further out away from the trailer frame which could work for you. The spring seats are at 80 inches on center, but you could grind them off and tack replacement spring seats like # TRSS238 in at the correct...
    view full answer...
  • Finding Replacement Bearing Sizes for 2006 EZLoader Trailer
    I spoke with EZLoader, who gave me your bearing sizes. The inner bearing is # LM48548, which measures 1.375 inches. Its matching race is # LM48510. The outer bearing is # L44649, which measures 1.063 inches. Its matching race is # L44610. You can also purchase a grease seal set, # BB60002. We also offer grease caps for 1.98 inch hub bores, such as the standard grease cap # RG04-020, and the EZ Lube grease cap # DC200L-DCRP. I've attached several review videos of these products for...
    view full answer...
  • Replacement Dust Cap for Lippert 4,400 lb Trailer Axle
    We've checked with Lippert in the past and for their 4,400 lb trailer axles the correct dust cap is the part # DC200L-DCRP that you referenced.
    view full answer...
  • Kodiak Disc Brake Assembly for 3,500 lb Axle Compatibility with Spindle Dimensions
    The Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - 3,500 lbs # K2HR35DKG will fit spindles that measure 1.063 inches at the outer bearing, 1.378 inches at the inner bearing, and 1.719 inches at the seal location. It also fits brake flanges that have the 4 bolt mounting pattern. Unfortunately the photo you sent with dimensions did not come through, so I can't see if they are compatible. If you have further questions please let me know.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Dexter 8-248 Hub, Races, Bearings and Grease Seals For Boat Trailer
    The Dexter 8-248 is a 3500 lb idler hub which uses the L44649 outer/L68149 inner bearing and a 10-19 grease seal. The bearings cross reference to the A4 and A17 bearings you mentioned and the 10-19 seal cross references to the 171255 seal. For bearings/races/seals, you'd need the # BK2-100 kit. For a replacement galvanized hub (which is what you'd want to use on a boat trailer), use # AKIHUB-545-35-G-EZ-K. The races are pre-installed, which is a good thing because installing the races...
    view full answer...
  • Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
    The Bearing Kit # BK2-100 should contain all the correct bearing, seals and races for 1 wheel. I always recommend pulling one hub apart and confirming the correct spindle. These fit the most commonly used axles under your 2014 Forest River R-Pod 179 but that is not a guarantee as manufacturers sometimes change components or the part were changed by a previous owner (See Picture and Article). A Seal Puller # PTW1219 will help you remove the old seal off the hub. The 7-Piece Installation...
    view full answer...
    Image 1 for
  • Outside Dimensions of Trailer Dust Cover
    The best way to determine which dust cap to consider is by taking apart one of the hubs and to get the numbers off the outer bearing and race. You can also get the hub bore inner diameter using dial calipers to get that measurement. I have linked you to our grease cap product page. The dimensions for the Lubed Dust Cap & Rubber Plug, part # DC200L-DCRP, that you referenced in your question are. Outside diameter is 1.99 inches. The inner diameter of the top hole for the rubber plug is 1.18...
    view full answer...
    Image 1 for
  • Bearing Kit for Redline 1-1/4 Inch Diameter Spindle
    The correct bearing kit for spindle # TRU44FR would be # BK1-150, along with grease cap # DC200L-DCRP. I have attached links to video reviews of each product for you.
    view full answer...
  • How to Pick Out Replace Grease Cap for Trailer Hub
    You will want to use a dial caliper or micrometer to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer.
    view full answer...
    Image 1 for
  • Cause for Grease on Front Tires of Motorhome That Just Had New Brakes Installed
    When packing a hub's bearings with grease prior to reinstalling it on the spindles (which would be perfectly normal after servicing the brakes) it is possible to over-fill the hub with too much grease. Its human nature: if some grease is good (it sure is) then more "must be better". More often than not this accidental over-filling of the hubs with too much grease occurs with the do-it-yourselfer but it can happen to the best of us, even a pro. When a hub is over-filled with bearing grease...
    view full answer...


< Previous



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Ryan G
Installed by:
Ryan G
Employee Joshua S
Video by:
Joshua S
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924