Save Up To 60% on HOT Independence Day Deals!
Grease cap fits trailer hubs with 1.988" inner diameter and has corrosion-resistant zinc plating.
Features:
Specs:
Dimensional Information
| Part No. | Material Gauge | Flange Diameter (A) | Crown Height (B) | Flange Length (C) | Overall Height (D) |
|---|---|---|---|---|---|
| 1500 Series | |||||
| F001518 | 22 | 1.988" | 0.94" | 0.218" | 1.156" |
Average Customer Rating: 4.7 out of 5 stars (158 Customer Reviews)
Grease cap fits trailer hubs with 1.988" inner diameter and has corrosion-resistant zinc plating.Like the fact that everything comes greased and ready for immediate installation. Perfect replacement!
It all started about 10 years ago when I purchased a custom built trailer. The trailer is great, but one of the stub axle/wheel kits they put on was missing a race. By the time I got the trailer home -- about 7 miles -- the dust cap was missing. Later I pulled off the wheel and noticed the race was gone and I replaced it and the bearing. I purchased several dust caps locally, all of which were supposed to fit. None of the ones off my old vehicles would work. After losing several more caps, I ordered these. Thinking I would lose them fairly quick, I ordered extras. When the box arrived, I examined the caps and was pleased with the quality. I took the beer can off the wheel and carefully hammered a new cap on. Well, now after pulling the trailer a lot, on many bumpy and bad roads, this cap has not loosened a bit. I highly recommend these caps.
TMBFarm - 12/12/2018It fit snug and is keeping the water out
Standard dust covers to replace bent on es
the cap was machined slightly larger diameter then the one that it replaced. It was difficult to install but with some modification it is doing the job.
Couldn't be happier !!
I went to {online store] and took old one in with me, they had to order it in and $XX.00 freight to boot. It showed up wrong and they wouldn't credit the freight back.
I went online and order here and no problems and received sooner than expected.
Top customer service and yes, now marked in my favorites for future use.
Share a smile
CERNdog
The grease caps were available on etrailer.com. The ordering was simple and easy. They arrived earlier than expected and exactly as we wanted. They work on our trailer. We would order from etrailer.com again.
Great quality products and very fast service! Thank You!
I ordered 3 Taskmaster 4.80-12 Bias Trailer Tire with 12" White Mod Wheel - 4 on 4 - Load Range C (Item # TTWAS12B4WMHP) on a Saturday. To my surprise they shipped them right away. The packaging was perfect and the wheels look strong and well made. This little kit trailer (cargo box is 60"x40"x24") has once been in a 3000 mile trip around the West, and the 8" wheels where almost 20 years old so I decided to get fresh tires and ordered the 12" wheels. I'll probably have to give the fenders a little more clearance but that's OK. I'm very happy with the product and service. Thank you guys!
Great service. The parts were here in two days. Best part they were less than half the price even with shipping than the local auto stores and big box retailers were asking for.
Fast ship. Very thorough shipping info.
The cap fits my trailer. Keeps the grease in and dirt out. It's a cap, what more can I say.
Had to dimple the dust caps as they were to small to fit tight. Other wise they should do the job. Other than for ever getting delivered long time.
I measured the hub and order the grease cap. It was installed using a piece of PVC pipe and a dead blow hammer and it sealed tight and looks great.
RWJ - 09/30/2015All the products were exactly what I needed to repair my trailer. After a little glitch in the order I contacted customer service and the problem was immediately resolved. I will definitely be shopping again when/if I need parts.
Thank you so much for replacing the damaged components in such a timely manner! The grease caps have been installed and the boat is in the water. I have been using etrailer for quite a while and have never been disappointed. This is my "go to" vendor for all of my trailer/towing issues.
They fit my hubs and keep the grease in for a good price. Not much else to say. I did go to the hardware store and get a pipe fitting to drive them in so I didn't dent them during installation.
Good value. A little tighter fitting than original ones on Dexter 2,200lb axle, so a bit tough to install. Plain silver steel, no etrailer.com markings on them, fine by me. I wish they were a bit beefier, but that's how it goes these days.
Nice tight fit. Easily installed with Dust Cap Driver Tool #290-991. I may be possible to install these undented without it, but the driver tool made it a very quick job.
It was gone after one short road trip.
The bearings and race i have ordered are the perfect fir for our trailer. They are the identical match for the 1969 dilly, verry pleased with the price overall great kit. I would defiantly recommend to anyone replacing bearings and races for the 1969 dilly.
Thanks for the phone support. Product delivered as promised, looks great, unfortunately it is not the correct size for an old vehicle I have. I was given the wrong size, should have measured myself. I am keeping the parts to use on older trailer. Will call to see if you have correct size soon, thanks again.
These came with a bearing kit I ordered for my trailer and they don't fit. My trailer dates back to the 60;s and the hubs are cast aluminum and, apparently almost impossible to find parts for.
It Was Great. It Got Here Before I Ordered It. Perfect Fit.
This is a fine grease cap. It slightly too large to fit my Quality Trailer Products Accu-Lube 3500# hubs, however, that is not the fault of e-trailer.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.