bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. TruRyde
  3. Caps
  4. Standard Grease Cap
  5. 2.441 Inch O.D.
Grease Cap, 2.44" OD Drive In - Qty 2

Grease Cap, 2.44" OD Drive In - Qty 2

Item # RG04-060
lowest price pledge
Our Price: $8.94
Trailer Bearings Races Seals Caps
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.22 lbs
Quantity: 
In Stock
Grease Cap 2.44 Inch OD Drive In
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Grease caps fit trailer hubs with 2.446" inner diameter and has corrosion-resistant zinc plating. Lowest Prices for the best trailer bearings races seals caps from TruRyde. Grease Cap, 2.44" OD Drive In - Qty 2 part number RG04-060 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (72)
  • Q & A (0)
  • Photos
  • Why etrailer?

TruRyde Trailer Bearings Races Seals Caps - RG04-060

  • Caps
  • Standard Grease Cap
  • 2.441 Inch O.D.
  • TruRyde

Grease caps fit trailer hubs with 2.446" inner diameter and has corrosion-resistant zinc plating.


Features:

  • Grease cap for trailer hubs
  • Drive-in installation
  • Corrosion-resistant zinc plating
  • 22-Gauge steel construction
  • Qty. 2 caps


Specs:

  • Quantity: 2
  • Flange diameter: 2.446"
  • Crown height: 1.03"
  • Flange length: 0.313"
  • Overall height: 1.34"


Dimensional Information

GC Diagram
Part No.Material GaugeFlange Diameter (A)Crown Height (B)Flange Length (C)Overall Height (D)
1500 Series
F001520222.446"1.03"0.313"1.34"



RG04-060 TruRyde Zinc Plated Grease Cap, 2.446" x 0.313" Flange - Qty. 2






Customer Reviews

Grease Cap, 2.44" OD Drive In - Qty 2 - RG04-060

Average Customer Rating:  4.8 out of 5 stars   (72 Customer Reviews)

Grease caps fit trailer hubs with 2.446" inner diameter and has corrosion-resistant zinc plating.

- RG04-060
by:

Perfect!!!



- RG04-060
by:

Great Communication and fast shipping



- RG04-060
by:

Fast and easy



- RG04-060
by:

I have a 1989 1 Ton Dodge Diesel pickup. My old grease caps were so bent they would not seal. Dodge does not carry them anymore. Dorman after market parts does not have them in this size either. Etrailer is the only place I could find the correct size. The lip of the grease caps I ordered were slightly mushroomed out at the very edge so they would not start into the wheel hub. By correcting that I was able to use these and they work and seal perfectly. Shipping time was minimal and the price was very reasonable. What a relief to get these after finding out that Dodge doesn't even have them anymore.



- RG04-060
by:

After measuring my existing part, I called Etrailer and was quickly connected to Nicole. I briefly explained what I needed and she asked me a few questions and made a recommendation and told me what size I needed to order based on my answers. She already knew who I was from her caller ID and she was able to place the parts in my shopping cart for when I got home. I went to the site, shopped for a few more items and I was ready to check out. The caps fit just right and I couldn't be happier with my order.



- RG04-060
by:

Order arrived ahead of schedule and packaged very well. Communications with sales staff was great, because of such a large order (100 caps) some delay was expected. I was informed of availability and expected shipping date. Thanks for great customer service.



- RG04-060
by:

These have worked out great. My original ones were missing, so when I repacked the wheel bearings, I needed new caps to install. These are well made and should last a long time. I would buy them again.



- RG04-060
by:

Just what I ordered fit great fast shipping I will always check here first for my RV parts.



- RG04-060
by:

The grease seals that I received were at a great price and better seals than the original on my 5th wheel trailer. Perfect fit just as described. I received the parts sooner than I expected. The customer service was top notch. I recommend etrailer to anyone needing parts. The product reviews and videos are great!



- RG04-060
by:

Good service



- RG04-060
by:

The whole order was perfect. I'm rebuilding the running gear on a1976 3 horse slant then remodeling the whole trailer by converting the trailer into a communications trailer for HF radio for disaster response. Front area will be living quarters. I am in our State Guard as a radio operator and also in county emergency management. This trailer will be my shelter and operating station when deployed to hurricanes and such. Since I'm spending my own funds on this, the good prices on etrailer are greatly appreciated.



- RG04-060
by:

The two sets of axle grease covers/caps I'd ordered arrived promptly and fit the axles perfectly. The website was easy to order from and provided good product lines to choose from. The product item videos were of great assistance. Thanks



- RG04-060
by:

I am not sure if its the drum (hub) or the center cap but it would not stay on unless I used silicon to "glue" it in. Its a temporary item anyway until I install bearing buddies anyway.



- RG04-060
by:

2.44" O.D. dust cap used on a thirty five year old Woods rotary cutter. Easy to find on your website by size and very easy to order. Received within 3 days by snail mail. Easier than going to a parts store. Will use etrailer again. Thanks



- RG04-060
by:

Easy to order, quick to ship



- RG04-060
by:

Great products and fast shipping. I use my trailer daily and etrailer keeps me rolling !!!!



- RG04-060
by:

They're shiny and they fit. Not much more one can ask from a new pair of grease caps.



- RG04-060
by:

Could not find match for old rhino mower cups locally. Found these on etrailer and they are perfect fit. Shipping was quick



- RG04-060
by:

Looked for the grease dust cap at my local auto parts and nobody had anything that would fit. Thanks to etrailer they had what I needed.



- RG04-060
by:

I bought these caps for my Dexter 42 series axles on my trailer. They fit perfectly.



- RG04-060
by:

Parts were delivered on time and fit perfectly. Have always had great service from etrailer.



- RG04-060
by:

Did get this one



- RG04-060
by:

Not much to say about grease caps. Order was a breeze and delivery was prompt, so you can call me happy



- RG04-060
by:

The grease caps fit great on my trailer . THANKS



- RG04-060
by:

Fit my Dexter axles perfectly. fast delivery service and I was kept informed of shipment the whole way!


25
72
Show More Reviews

See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps



  • How to Determine the Correct Replacement Dust Caps for a 2011 Haulmark Cargo Trailer
    To determine the correct dust caps for your trailer you will need to measure the inner diameter of the hub/drum where the cap fits. The measurement has to be as accurate as possible so you will need to use digital or dial calipers. If that measurement is 2.446 inches then cap set # RG04-060 will fit. I also can most likely figure out the correct one by going by the outer bearing number. You will not have to remove the hub/drum to get the number. You should be able to see it by removing...
    view full answer...
  • How to Remove Dust Cap on Snowbear Utility Trailer
    The dust or grease caps on your Snowbear Utility Trailer should just pop out and in. I recommend using a flat head screwdriver to pry them out or tap them from side to side with a hammer. Then to install new ones, you can just gently hammer them in. If you are still needing replacement grease caps, you will want to measure the inner diameter of the hub where the cap fits. I recommend using a digital caliper like # PTW80157 to get the most accurate measurement possible. For example, the...
    view full answer...
  • Which Grease Caps for a 1987 Coleman Sequoria Pop-Up Camper
    You will need to measure the inside diameter (ID) of the cap mounting surface on your hub to match the outside diameter (OD) of the grease cap. You will then be able to select the proper style cap with the proper OD for your trailer hub. You can also find the correct grease cap if you can find the hub assembly part number or the bearing part numbers, inner and outer. the grease seal part number would help also.
    view full answer...
  • Cap Recommendation to Hub Bore 2.44 inches
    The closest cap we have to the size you mentioned woudl be the part # RG04-060 which is designed fit a hub bore of 2.44 inches which would be a tiny bit too big for the dimension you listed. The other sizes we offer are either much bigger or much smaller.
    view full answer...
  • Grease Cap With 2.4 - 2.5 Outer Diameter
    We have an option that is close to the measurements you took with the Grease Cap, 2.44" OD Drive In # RG04-060. While this isn't the exact measurement you have, the 2.44" outer diameter is so close that I at least wanted to mention it as a possible option for you.
    view full answer...
  • Recommended 2" Dust Caps for a 1994 Coleman Destiny Trailer
    From what I could find out about the part number 4714A0621, it looks like it is a 2 inch diameter standard grease cap. So with that being said, the TruRyde 1.988" OD Drive In Grease Cap # RG04-020 will be what I suggest. These will fit your hubs nice and securely.
    view full answer...
  • Recommended Grease Cap That Fits Dexter Axle Trailer Hub and Drum Assembly # 42656
    The grease cap that will work with the Dexter Axle Trailer Hub and Drum Assembly, part # 42656 is part # RG04-060. These grease caps have a 2.446 inch O.D. and are made of 22-gauge zinc-coated steel.
    view full answer...
  • Replacement Grease Cap and Wheel Studs for a RV Trailer Hub with ALKO Electric Brakes
    The grease cap part number that you referenced cross references to a drive in cap with a 2.44 inch outside diameter. If you have a standard cap then the Grease Cap, 2.44 inch OD Drive In, item # RG04-060, is the correct part. If you have a grease fitting in the end of the spindle then the Grease Cap, 2.44 inch OD Drive In with Plug, item # RG04-080, would be the correct part. These parts are correct only if the 092101 part you mentioned is correct. The correct inner and outer bearing part...
    view full answer...
  • Purpose of Grease Caps and How to Measure to Get Correct Size
    The purpose of the grease cap is to protect the bearing and the axle from any dirt getting into the bearing, which would then damage the bearing, hub and axle. So it is a good idea to have caps on your axle. To get the correct size cap you would need to measure the inside diameter of the cap mounting surface on your hub. Then that measurement would match up to the cap size outside diameter. The sizes of caps only vary by a small amount so the measurement has to very accurate. Some of the...
    view full answer...
  • Can Double-Lip Grease Seals Be Substituted for Standard Seals
    You can replace a standard grease seal with one of the Bearing Buddy seals like # BB60002, even if you do not care to use the Bearing Buddy protectors, so long as the seal inner and outer diameters match the dimensions required by your spindle and hub bore. These seals are the double-lip type that can withstand the higher grease pressure inside the hub bore when a Bearing Buddy grease cap is installed but they will provide durable service even if this is not the case. They will also work...
    view full answer...
  • Which Grease Caps fit Trailer Hub Part # 8-201-5
    For hub 8-201-5 you will need 2.44 inch OD drive in caps. We have several caps available for this size like part # RG04-060, which is a standard cap, or part # RG04-080, which have removable plugs for checking grease or bearings.
    view full answer...
  • Replacement Bearing Cover Options for Bri-Mar Dump Trailer
    You will need one of two sizes depending on the axle capacity of your Bri-Mar dump trailer. If you have 7,000 lbs or 8,000 lbs axles, then you will need part # 21-43-1 and # DC-RP if you have EZ Lube spindles (grease zerk on the end) or you can use part # RG04-100 if you have standard spindles. If you have 5,200 lbs or 6,000 lbs axles, then you will want part # RG04-080 if you have EZ Lube spindles or part # RG04-060 if you have standard spindles.
    view full answer...
  • Grease Seals and Dust Caps for AL-KO Trailer Hubs with 25580 and 15123 Bearings
    The most grease seal associated with hubs that use the bearings you have specified is # GS-2250DL for 1 seal or # RG06-070 for a pair. For a grease cap you will likely need a 2.44 inch cap as that is the size associated with the hubs that use the bearings you mentioned. If the spindle has a grease fitting at the end use # RG04-080. If the spindles do not have grease fittings use # RG04-060.
    view full answer...
  • Replacement for 2.5" Outer Diameter Grease Cap on 2014 Maxum Dump Trailer
    The closest thing we have to a 2.5" measurement is the # F001515 which is 2.567" or the # RG04-060 at 2.446". I'm not sure how you measured your existing grease caps, but I recommend using a digital caliper like the # PTW80157 to get the most precise measurement possible. More than likely you will be able to use the # F001515 since you want to be on the larger side for a snug fit and it is a drive in installation. I would remeasure just to be sure.
    view full answer...
  • What Grease Cap Will Fit On The Dexter Complete E-Z Lube Hub and Drum Assembly, # 8-201-5UC3-EZ
    The grease cap for the Dexter Complete E-Z Lube Hub and Drum Assembly, # 8-201-5UC3-EZ, is the TruRyde Grease Cap, # RG04-080. The Fulton Grease Cap, # F001527, will not fit. It is not the right size and it is not made for the EZ Lube axle. If you do not have the EZ Lube axle the TruRyde Grease Cap, # RG04-060 would be the correct grease cap.
    view full answer...
  • Finding a Hub for a Very Old Trailer with 6 Lug Bolt Pattern # 1779 inner and # 2788 Outer Bearings
    I did some research and found that the 2,600 lb Hub, # 22834, takes the # 1779 outer bearing and # 2788 inner bearing and would use the # 29031 grease seal. This hub has a 6 bolt on 5-1/2 inch bolt pattern. This sounds like the hub you have, and replacement parts are available. Along with the parts mentioned above you may need grease caps, # RG04-060, and races, # 1729 and # 2729, to complete parts needed to repair one of your existing hubs. When doing my research I found that no other...
    view full answer...
  • Grease Caps Available that Fit a 2.44 Diameter
    We do have a variety of grease caps that fit the 2.44 inch diameter that you reference; our selection has been linked for you to filter through. Among the options we have the non-threaded Bearing Buddy Bearing Protectors # BB2441, the threaded option # BB2441T-SS, as well as traditional grease caps for EZ Lube spindles # RG04-080, and non-EZ Lube spindles # RG04-060. Each of these part numbers come in a quantity of 2 and the prices can be found on the product pages. If you are talking...
    view full answer...
  • Replacement Brakes and Hub Assemblies for Lippert 5,200 Pound Axle
    For your trailer the drums you need are # 8-201-5. They're designed to fit bearings # 25580 and # LM67048 with the 2-1/4 inch seal # GS-2250DL. For brakes I recommend # AKEBRK-7-SA. Both the left and right sides are included. They are side specific so you'll want to pay attention to the labels when installing. They're self-adjusting brakes so they'll need to be adjusted when you install them and then never again. The grease cap to fit the hubs is # RG04-080 if you have E-Z lube axles...
    view full answer...
  • Converting From Disc Brakes to Electric Brakes on 1977 Airstream Sovereign 31
    In order to verify if this is the correct hub and drum assembly you will need to check the bearing numbers. If the numbers are too worn, you will need to measure using a digital caliper like the # PTW80157. I have attached a photo of where you need to measure on your spindle. We will assume you have this information since you already removed your hub and drum. The Dexter Trailer Hub and Drum Assembly # 8-201-5 is for 5,200 lbs axles and has a 6 on 5-1/2 bolt pattern. This uses a # 25580...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hub and Drum Recommendation for Replacing Hub with Bearings 25580, LM67048
    Actually the bearing info you listed indicates you have a very standard number 42 spindle which we have plenty of fits for. Only issue is that you'd need to go with a 6 on 5-1/2 bolt pattern. So for that you'd want the part # 8-201-5 with the bearing kit # BK3-300 and grease cap # RG04-060. Then for brake assemblies part # AKEBRK-7-SA which is a kit for both sides of the axle.
    view full answer...
  • Does Hub Bore Have Any Bearing on Wheel Center Cap
    You can use any center cap that fits the wheel's pilot hole with the Dexter Trailer Hub and Drum for 5,200-lb and 6,000-lb Axles - 12" Diameter - 6 on 5-1/2" # 42656. The size of the hub bore is 2.446" and that matters simply in regards to the grease cap, for which you'd need Grease Cap # RG04-060. For a wheel, let's say as an example you used the Aluminum Jaguar Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 # LHSJ311, which has a 4.25" pilot diameter. For that you can use the Lionshead Trailer...
    view full answer...
  • Parts Needed for Hub and Drum Assembly for Rebuilt Trailer
    If you have hub and drum assembly # 8-174-5UC3, which you referenced, the assembly comes with the bearing sand seals. However, the replacement parts are: # 25580 Inner bearing # 15123 Outer bearing # RG06-090 seals # RG04-060 Grease Cap # 15245 Race # 916N lug nuts The lug nuts won't need washers. We do not sell backing plates separately. If you need backing plates and brake shoes, you are better off pricewise to purchase a new brake assembly like # AKEBRK-7R-SA and # AKEBRK-7L-SA. If...
    view full answer...
  • Recommended Disc Brake Components for Nuwa Hitchhiker 5th Wheel Trailer Conversion
    For your Nuwa Hitchhiker 5th wheel, I recommend you start with the Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 # KHR12D. For this assembly you will need the bearing kit # Bearing Kit # BK3-100. For your grease caps you will need # RG04-060 which come in sets. For your calipers, I recommend the Kodiak Disc Brake Caliper - Dacromet# KDBC225DAC along with the mounting bracket # KCMB12D and brake pads # K225CP. For your brake lines and your Electric Over Hydraulic actuator, I recommend...
    view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer bearings races seals caps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer bearings races seals cap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.