Replace the oil/grease cap, O-ring, and plug on your 9K-15K axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Easy access side port lets you add or drain lube without removing cap. Black e-coat finish.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Valcrum universal threaded aluminum oil bath or grease cap for the 9,000 pound to 15,000 pound axles. Now, this part here replaces the oil bath or grease cap, the O-ring, and the plug on these axles. It works on the 9,000 pound axles manufactured after October 1st, 1989, works on 10,000 pound axles and 12,000 and 15,000 pound heavy duty axles. This part will include the cap, a watertight O-ring seal, and the magnetic vent plug. This is a direct replacement for the Dexter or Valcrum oil caps.
The Dexter numbers it replaces is 21-36, 21-036, or the K71-148-00. The Valcrum it fits is the ST-400 manufactured after 08 of 2019. Now, this cap function is either an oil bath or a grease cap. We mentioned the magnetic vent plug right here. If I flip it around, if you look in the middle, it has a rare earth magnet installed in there.
This will attract damaging metal particles so it helps identify problems before they become critical. The cap itself is an aluminum alloy body, has a nice black e-coat finish to resist corrosion, also helps dissipate the heat. And the lens right up front here is a clear viewing lens, so it lets you quickly check the oil level. The port over here, this is an easy to access side port that'll let you fill or drain the lubricant without removing the cap. And the O-ring right here and then the gasket underneath the front cap here will provide a nice tight seal.
This threaded cap installs very easily. And the thread outer diameter on this, if we measure straight across, would be four inches. But that should do it for the review on the Valcrum universal threaded aluminum oil bath or grease cap for the 9,000 pound to 15,000 pound axles.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Replace the oil/grease cap, O-ring, and plug on your 9K-15K axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Easy access side port lets you add or drain lube without removing cap. Black e-coat finish.
Great doing business! Exactly what I ne eded
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.