Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle
(1569 reviews)
Price: $12.12
In Stock
Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle
Item # BK2-100
Retail:$27.90
Our Price: $12.12
You Save: 57%
Orders above $50 qualify for Free Shipping
In Stock
- All Info
- Reviews (1569)
- Q & A (533)
- Photos
- Why etrailer?
etrailer Trailer Bearings Races Seals Caps - BK2-100
- Bearings
- Standard Bearings
- Bearing Kits
- 3500 lbs Axle
- Bearing L44649 and L68149
- etrailer
- Race L68111 and L44610
Contains everything needed to repack one hub on your Lippert, Dexter, or Al-Ko 3,500-lb axle.
Features:
- Contains everything needed to repack one hub on your Lippert, Dexter, or Al-Ko 3,500-lb axle
- Includes:
- 1 Outer bearing (L44649)
- 1 Inner bearing (L68149)
- 1 Inner cup (L68111)
- 1 Outer cup (L44610)
- 1 Grease seal (10-19)
- 1 Cotter pin
- 1 Tang washer for EZ-Lube spindles
| Seal | ||||||
BK2-100 Hub Bearing Kit for 3,500 lb Axles - Lippert, Dexter, and Al-Ko, #84 Spindle
Customer Reviews
Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle - BK2-100
Average Customer Rating: 4.8 out of 5 stars (1569 Customer Reviews)
Contains everything needed to repack one hub on your Lippert, Dexter, or Al-Ko 3,500-lb axle.
- BK2-100
Arctic P - 06/14/2020
by: Arctic Patmigan06/12/2019
Bearing and seal kit are a great quality purchase, they fit perfectly and have been running trouble free for a year now. Will definitely use this kit again when it is time to replace the bearings in my utility trailer or boat trailer. I recommend using the Buddy Bearing grease hub with this Bearing & Seal pack.
Comments
This product has proven I made the best choice to keep my utility trailer rolling trouble free.
Arctic P - 06/14/2020
- BK2-100
by: Courtney C.05/15/2021
This kit went on great on my 2003 Shoreland’r single axle with disc brakes. My brakes were completely inoperable so there was a huge difference on the post-project test ride. I had to replumb my hard brake lines on the axle and I needed to make some pretty sharp bends to dodge the springs.
- BK2-100
Brooke M - 09/15/2021
by: Mark09/06/2021
Inner bearing races are the wrong outside diameter. The bearing on the right is the one that came out of the trailer, the one on the left is the one that came in the bearing kit. The new one was too big to seat in the wheel, despite being the same part number. I bought one locally (same part number), and it went in perfectly. Disappointed that I waited almost 2 weeks to get these kits, and was unable to use the races.
Comments
Thank you for your review and bringing this to our attention. Our customer service team should be reaching out to you in the near future.
-- Brooke M - 09/15/2021
- BK2-100
by: Chris10/31/2021
I wasn't able to find this bearing kit locally anywhere, everyone is out of stock due to this Covid BS. I've used etrailer before with very good results, so I ordered them there for my boat trailer. They were out of stock also but they accepted my order. I had regular emails with the status and got the bearings pretty quick. Installed today. A+ guys! Thank you
- BK2-100
by: Richard11/17/2021
packaged with parts together, fit well on the axle, came in a timely way as expressed by etrailer, have used this kit in the past, would recommend others to experience these kits, very satisfied with etrailer and staff
- BK2-100
Thomas M - 09/09/2021
by: Thomas09/08/2020
Order arrived promptly as described. Thanks Etrailer
Comments
We have put a few thousand miles on since replacing the bearings. No issues so far.
Thomas M - 09/09/2021
- BK2-100
by: Ricky11/18/2021
Excellent working with etrailer. They knew what I needed and guided me to the most cost effective product. In addition I was given the opportunity to decide if I wanted to wait on one part that would be on back order for a couple weeks.
- BK2-100
by: Jim10/19/2021
We have ORDERED A FEW THINGS FROM ETRAILER in the past weeks due to a suspension spring snapped on our trailer. etrailer is helpful and seem to know their stuff. Thanks to all from those who help with and take orders, those who pack and ship what we buy, everyone involved.... much appreciated... thnx 1,000,000
- BK2-100
by: Norman06/28/2021
I ordered the Dexter nev-er-adjust electric trailer brake and bearing kit's for my Aliner. The installation was easy thanks to your instructional video's. The delivery was fast and everything fit perfectly. I took one twelve hundred mile trip and had no issues. I also ordered the Brophy ball mount because it was long enough for me to drop my tailgate without hitting the hitch crank. Thanks
- BK2-100
by: Darin11/22/2021
ETrailer is a good company to order from. They have what you need and it arrives very quickly. They also communicate the status of your order from start to finish. I wish everyone did business like this.
- BK2-100
by: Michael10/11/2021
Needed to replace bearings on trailer hub and wasn't sure what size to get so Jesse fixed me up in a few minutes. After receiving bearings I installed them in a few minutes and they were a perfect fit. Thanks for your help Jesse :)
- BK2-100
by: Tony C.09/17/2015
Perfect kit for 3500 lb axles. Replaced all 4 inner and outer bearings and fortunately only had to replace 2 outer races. But still can't beat the price for this kit versus ordering parts separately. Also ordered the Powerbuilt Deluxe Bearing Packer (ALL648594) to speed things along. Finished the project with Grease Caps, 1.986" OD EZ Lube (RG04-040) and the matching Dust Cap Driver Tool - Small - for 1.986" Grease Caps (290-99). Photo after first hub completed.
- BK2-100
Ralph P - 09/24/2021
by: Ralph09/23/2020
I had order these for my brothers trailer and install them, they performed great.
Comments
After dozens of trips to the landfill, the tires are performing great.
Ralph P - 09/24/2021
- BK2-100
by: Daniel08/14/2021
Works great to swap them out on dexter 3500lb axles. Everything I needed except grease. Still going a year later no issues. Ready to repack again. I repack manually.
- BK2-100
by: Bob C.03/06/2014
The bearing kit was intended for a Dexter 3500lb EZ-Lube torque flex axle w/ electric brakes. When I ordered, I asked eTrailer to ensure I had ordered the proper parts, but after they shipped them, they told me that they could not verify what they'd fit, and the only way to be sure was to disassemble my axle and records the part numbers FIRST. Fortunately, the parts fit perfectly, Too bad eTrailer doesn't have a cross-reference parts list for what parts actually fit what. Having to disassemble things before ordering makes the device unusable until the parts are received. Fortunately, eTrailer shipped my parts 2-Day Priority, and I had them in jig-time. This is not my first eTrailer purchase and I am very happy with their service and prices.
- BK2-100
by: LeeinAz09/13/2017
After ready so many good reviews my expectations of etrailer were high and was sadly dissappointed when my trailer bearing replacement kit showed up 3 days late and with all the pieces loose in small bubble wrap envelope. I expected better packaging for something so crucial that Im relying on. And the parts were all thrown together carelessly. Will be closely inspecting everthing and hoping for no damage. Will be returning if there is! Dissappointed...
- BK2-100
by: Wheel beg/seal kit06/09/2019
Purchased travel trailer wheel bearings and seals For 10k overhaul. Easier and cheaper to repack and replace vs. cleaning and repacking. Seals will be destroyed anyway while repacking
- BK2-100
by: Craig07/09/2021
Everything arrived and was exactly what I had ordered. Bearings have been hard to find lately. Keep this in mind when ordering. Etrailer offered me a single bearing because the kit was on back order. I wasnt in a hurry so I waited instead. It was thoughtful of them to extend that offer. You don't get service like this anywhere. I will always do here first. Thanks for great service!
- BK2-100
by: Brian D.09/15/2015
I bought these as spares for my Eagle Ultra Utility trailer. They appear to be exact matches to the existing set. I was very pleased with the price for the complete kit. E-trailer got them to me fast along with my other items. I will keep the bearings with me on the road for peace of mind.
- BK2-100
Chris - 03/22/2021
by: Chris03/21/2020
First I'd like to say the I've ordered about 5 or 6 items off of etrailer in the last 6 years or so. The way they do business is outstanding. Very streamlined and efficient. As far as the bearing set I just purchased, It's hard to give a rating of the quality of them. They are bearings. They look fine. Took about a week to arrive, but I chose economy shipping. I'm sure if I paid for a quicker service they undoubtedly would have arrived sooner. I wasn't in a hurry. Alway a pleasure doing business with etrailer.
Comments
Product is fine, works as expected
Chris - 03/22/2021
- BK2-100
by: Terry11/09/2021
Bearings and seal worked out great. 3,000 mile trip to the Florida key's and back with no issues.
- BK2-100
by: Jason R.05/07/2020
Best customer service ever!!!!! Was trying to get boat ready for a trip to the coast and found that the original brake pad backing had deteriorated due to saltwater. I also found I had two wheel seals leaking. Got on etrailer.com and found the parts I needed with ease. I ordered everything I needed and had them overnighted at 4:36pm on a Tuesday. Customer service called 30 minutes later to apologize and said that my order was placed after the orders for the day had been sent out. They promised they would do everything they could but it would probably be the next day before they could send them out and I might not get them until Thursday. I completely understood and was not upset. Well, the next morning (Wednesday) by 10am my parts were sitting on my porch!!!! Not sure how they made it happen but thank you to whoever did. The parts were top notch and the stainless steel backing brake pads and stainless lug nuts were just why I needed! Top notch and will never buy trailer parts from anywhere else. Thank you and now I’m going fishing a day early! Boats in the water thanks to etrailer!
- BK2-100
by: Robert10/25/2021
Disappointed with packaging, tumbling around in a paper envelope with nothing packed for protection in transport.
- BK2-100
by: David09/22/2021
Quality products, order was correct and delivered as promised. My new go to place for my trailer parts. Thanks ETrailer.
- BK2-100
by: Billy08/14/2021
Quality products at a reasonable price. I chose economy shipping and it took forever to ship and get here but that was my choice. Etrailer carries a wide selection of parts and I will use them again.
30
1585
Show More Reviews
Ask the Experts about this etrailer Trailer Bearings Races Seals Caps
- Electric Brakes for 10 x 2-1/4 Drums on 3,500 lb Axle & How to Determine Correct BearingsLet's start with the brake assemblies, which you were kind enough to give the dimensions on for the drum, as well as the axle capacity, which are the most important things. For self-adjusting electric brakes I recommend the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA. These brakes will fit your brake mounting flange and fit your 10" x 2-1/4" drum; you will simply need the Mounting Hardware for 10" Brake Assemblies # BRKH10B. As for the bearings, the most likely kit...
view full answer...![Image 1 for]()
- Replacement Bearing Kit for Lippert 3500lb AxleThe Bearing Kit # BK2-100 is the correct kit for your Lippert 3500lb axle. This will include the inner and outer races and bearings with a new grease seal, cotter pin and tang washer. I recommend using a Bearing Packer # PTW1218 with LubriMatic LMX Industrial Strength Grease # L11390 for the new bearings. This will ensure that you get grease throughout the bearing before installation.
view full answer... - Wheel Bearing Kit for Dexter 5 Lug Trailer with 3500-lb AxlesFor your Dexter 3500-lb 5 Lug axles you will need # BK2-100 . This kit comes complete with all of the bearings and seals you need to replace on 1 hub.
view full answer... - Replacement Trailer Brake Magnet and Assemblies for Dexter 12,000 lb Trailer AxleFor a 12,000 lb Dexter axle the correct replacement brake magnets would be the part # BP01-306 which can work on either side of the trailer. Or for all new assemblies you'd want the part # 23-442-443 which is one for each side. These come with magnets so you wouldn't need those as well.
view full answer... - Replacement Bearings and Seals for Lippert 4,400 Lb AxleThe Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 or just the Grease Seal part # RG06-050.
view full answer... - Replacement Bearings, Seals, and Races for Unique #84 Spindle/HubAccording to the part numbers you gave it looks like you need outer bearing # L44649 with the matching race # L44610, inner bearing # L68149 with the matching race # L68111, and then the grease seal # 168233 which has an inner diameter of 1.688" and outer diameter of 2.332" which fits unique #84 spindle/hub combinations. This seal has the same dimensions of a 16667 seal that is commonly used on a vehicle. The bearing kit # BK2-100 that you referenced has all of the bearings and races...
view full answer... - Weight Capacity of Dexter P-12 Model SLR AxleI reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing # L68149, outer bearing # L44649, and the grease seal # 58846. All of these can be found in the kit # BK2-100 if you are needing to replace your bearings and seals.
view full answer...![Image 1 for]()
- Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel TrailerThe Bearing Kit # BK2-100 should contain all the correct bearing, seals and races for 1 wheel. I always recommend pulling one hub apart and confirming the correct spindle. These fit the most commonly used axles under your 2014 Forest River R-Pod 179 but that is not a guarantee as manufacturers sometimes change components or the part were changed by a previous owner (See Picture and Article). A Seal Puller # PTW1219 will help you remove the old seal off the hub. The 7-Piece Installation...
view full answer...![Image 1 for]()
- Replacement Bearing Kit for 1988 EZ Loader Trailer with BT 150/151 Straight SpindleThe correct replacement bearing kit for your 1988 EZ Loader trailer with the BT straight spindle is our part # BK1-150. This kit includes the inner/outer bearings to fit your 1-1/16" spindle shaft size, races, cotter pin and spindle washer. For the correct grease seal, you'll need to use # 13194, since the one included with the # BK1-150 kit is not the correct size.
view full answer...![Image 1 for]()
- Tongue Washer Compatibility with Trailer Spindle and Tapered BearingsThe Tang Replacement Spindle Washer # 5-71 or the Washer Spindle Tongue # 165863 will fit into the groove of your spindle to keep the washer and nut from rotating. This gives you a similar outcome to the tang style washer that uses the cotter pin to hold it, but the idea is the stabilization of that washer that will keep slight pressure on the flat side of the tapered bearing to hold it in place. This is one style similar to a D style washer as well like Spindle Nut Kit for EZ Lube Axles...
view full answer... - Converting Brakes of 1994 Jayco Eagle to Electric DrumReplacing the hub/drums on your trailer will not change the length of the axle at all. Thankfully the hub manufacturers we carry all have the same overall length for the hubs so there's no need to worry about that. The hub/drum part # 8-173-16UC3-EZ would work great on your spindle as long as it has a diameter of 1.063 inch where the bearings ride. The brake assemblies part # 23-47-48 would fit this as well. A great way to upgrade your trailer to a 7-way would be with the 7-way upgrade...
view full answer... - Replacement EZ Loadr Boat Trailer BearingsBased on your VIN I believe you have a 3,700 lb axle but unfortunately cannot confirm. If you have 10 inch hubs then that would help confirm. For that axle you would use # L44649 bearing and # L68149 bearing along with seal # 010-180-00. The best way to confirm is actually to pull a hub and look at the numbers on the face of the bearings. Based on what I could find the above is the correct fit.
view full answer... - Replacement Bearings, Races and Seals for 2009 K-Z Spree 5TH WheelWe offer a great kit for you with all of those items included. Bearing Kit # BK2-100 includes both inner and outer bearings, races and a grease seal. This is a per hub kit so for your 2009 KZ Spree 265RLS 5TH Wheel so if you are replacing all your bearings you will want to order 4 of these kits. You can add on the Bearing Buddy Bearing Protectors # BB1980A-SS in place of your grease caps to protect your bearings by keeping water out and ensuring enough grease is in the hub. These protect...
view full answer... - Bearing Kit with Caps, Castle Nuts, and Lug Nuts for Hub with L68149 and L44649 BearingsFor a kit that includes the bearings, races, and seal you'd want the part # BK2-100 for each hub. Then for caps you'd want the part # DC200L-DCRP. For a castle nut # 165686 and for lug nuts # AM90070.
view full answer... - Trailer Hub and Bearings for 2017 Winnebago Micro Mini 1700BH Your 2017 Winnebago Micro Minnie 1700BH has a 3,500 lb axle, so for just the bearing kit you will need the Bearing Kit # BK2-100. For a replacement hub and drum the correct part is the Dexter Trailer Hub and Drum Assembly # 84546UC3. Then for grease I recommend the LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11380. And for a bearing packer I recommend the Bearing Packer # PTW1218 or # ALL647646.
view full answer... - Bearing Kit that Fits Lippert 3,500 lb Trailer Axle 402767Since the Lippert trailer axle 402767 is a 3,500 lb trailer axle the bearing kit part # BK2-100 is the correct fit for it.
view full answer... - Bearings & Seals For 3,500 lb Dexter AL-KO Hub We do have the exact bearing kit you need for your 3,500 lb Dexter AL-KO hub and drum, which is the following: - Bearing Kit # BK2-100 This includes the proper bearings, races, and grease seal for your hub.
view full answer... - Brake Assemblies for Dexter 10k Trailer Axles of 1999 Eager BeaverIs there a capacity listed anywhere on the axle? I can give Dexter the serial number of your axle but it may take a couple days and if you could get me the diameter of your axles or the capacity I could much quicker get you what you need.
view full answer... - Bearing Kit for #84 Spindle, L44649/L68149 Bearings & EZ Loader Trailer 3700# AxelYes, we have these items individually as well as in kit. The EZ-loader’s Bearing Repair Kit you referenced is 2ea L44649 Bearings (Outer) - L44610 Races (Outer) - L68149 Bearings (Inner) - L68110 Races (Inner) and AD2527E Seals (2.33" OD). We have the Bearing Kit for #84 Spindle, L44649/L68149 Bearings # BK2-100. This kit contains 1 each Bearing L44649 (outer bearing) and L68149 (Inner bearing) and 1 each inner/outer race L44610 and L68111. Plus Double Lip Seal seal 10-19, tang washer...
view full answer...![Image 1 for]()
- Info Needed to Determine Replacement Bearings for TrailerSometimes we can find that info with just the year and model but typically it's easiest to look at the axle and let me know what the capacity is. In the worst case scenario you'd need to take the hub off and get either the bearing numbers or the diameter of the spindle where the bearings and seal ride.
view full answer... - Can Bearing Kit BK2-100 be Used on Trailer that Had D-Washer on Spindle NutIf everything but the tang washer of the bearing kit # BK2-100 matches what you have you could go with it and then just reuse the washer you have now and you'd be fine. As long as you didn't lose yours it would work great. We do have just a D-washer by itself with part # 5-23. Or you could piece together your own kit too with just parts you need. The bearings would be # L44649 and # L68149, and the races would be # L44610 and # L68111. The seal would then be the # RG06-050.
view full answer...![Image 1 for]()
- How To Determine Which Bearing Kit Fits A Specific TrailerI would be happy to help you find the correct bearing kit for your trailer, but unfortunately we do not have a way to look this up by the VIN. Instead there are a few different options to get the information. If you can send me a picture of the axle tag located on the center of the axle I can use that to determine the bearing combination. If the axle tag is missing/unreadable then you will need to remove one hub and look for the bearing number stamped in the face of each bearing as...
view full answer...![Image 1 for]()
- Availability of Replacement Hub with LM12749 Inner and JL26749 Outer BearingI checked our inventory and it looks like we do not offer a hub with an outer bearing that will match the outer bearing dimension on your trailer spindle. That probably means you'll have a really hard time finding replacement parts, since we do carry a large selection for the most popular set-ups on the road today. The only solution I could offer would be to replace your axle altogether with one whose spindles are more common and for which parts are readily available today. If you're...
view full answer...![Image 1 for]()
![Image 2 for]()
- Correct Bearing Kit for Winnebago Micro Mini with 3,700 Lb AxleThe 3,500 lb and 3,700 lb axles use the same bearings and seals. Therefore, you can use the Bearing Kit for #84 Spindle part # BK2-100.
view full answer... - Stainless Steel Kodiak Disc Brakes for 3,500 Pound # 84 SpindleA #84 spindle, like # TRU24FR , is a spindle for a 3,500 pound axle that has inner bearing # L68149 and outer bearing # L44649. The bearing kit that fits is # BK2-100. To replace your brakes and hubs you'll need the Kodiak Stainless Steel Brake Kit # K2R35S with hubs # KH84545S. You'll also need the bearing kit # BK2-100 that I mentioned earlier.
view full answer...![Image 1 for]()
- Which Hub, Drum and Brakes Do I Need for 3500-lbs Axle with L44649 Outer BearingI may have a solution for you, but there is not an L44549 bearing; it's possible that you mean the # L44649, which is a fairly common bearing and can be found in many hubs that fit on 3500-lbs axles. For a 3,500 lb axle with outer bearing # L44649 and inner bearing # L68149 (1.378" inner diameter) you could use the Bearing Kit # BK2-100 or get a complete hub and drum assembly with the Trailer Hub and Drum Assembly # AKHD-545-35-K; this hub and drum has a 5 on 4-1/2" bolt pattern, which...
view full answer... - Bearing Kit for EZ Loader Boat TrailerFor your VIN that starts with 1ZE the correct bearing kit is the part # BK2-100.
view full answer... - Replacement Bearing Kit for a 2018 Grand Design Imagine 2800BHThe correct replacement wheel bearing kit or your 2018 Grand Design Imagine 2800BH should be the Bearing Kit for #84 Spindles part # BK2-100. This bearing kit comes with one L68149 inner bearing, one L44649 outer bearing, the corresponding races, a 10-19 grease seal, a tang washer, and a cotter pin. This will be everything that you need to rebuild the hubs on your Dexter 3,500 lb axle. You will need one kit per hub. Please note that in order to ensure you have the bearings properly...
view full answer... - Bearing Kit for 3500 Pound Dexter AxlesWith a 3,500 pound Dexter axle your bearings are # L44649 for the outer and # L68149 for the inner. So you were looking at the correct bearing kit with part # BK2-100.
view full answer...![Image 1 for]()
Do you have a question about this Trailer Bearings Races Seals Cap?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer bearings races seals caps for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer bearings races seals cap information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Alexander C
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.