bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. etrailer
  3. Seals
  4. Grease Seals - Double Lip
  5. 2.565 Inch O.D.
  6. 1.719 Inch I.D.
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

Item # RG06-050
Our Price: $12.04
Trailer Bearings Races Seals Caps
Shipping Weight: 0.14 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replacement grease seals. Double-lip design helps keep water out and grease in. Great Prices for the best trailer bearings races seals caps from etrailer. Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 part number RG06-050 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1202)
  • Q & A (0)
  • Photos

etrailer Trailer Bearings Races Seals Caps - RG06-050

  • Seals
  • Grease Seals - Double Lip
  • 2.565 Inch O.D.
  • 1.719 Inch I.D.
  • etrailer

Replacement grease seals. Double-lip design helps keep water out and grease in.


Features:

  • Replaces worn or damaged grease seals to help maintain optimal performance of bearings
  • Helps keep moisture out and grease in with double-lip design


Specs:

  • Inner diameter: 1.719"
  • Outer diameter: 2.565"
  • Quantity: (2) 10-19 grease seals


Inner Diameter Outer Diameter Applications
1.719" 2.565" 3,500-lb Axles

Seal Cross Reference
Dexter Transcom National NOK Chicago Rawhide
010-019-00 171255TB 473336 AD2548EO CR 17144



RG06-050 AxleTek Double Lip Grease Seal 2.565" Outer Diameter - 3,500-lb axles - Qty 2

Same as 158800, GS-1719DL, 58846, and 171255





Customer Satisfaction Score:


Customer Reviews

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 - RG06-050

Average Customer Rating:  4.8 out of 5 stars   (1201 Customer Reviews)

Replacement grease seals. Double-lip design helps keep water out and grease in.

by:

They were shipped in the same box as springs. Half of them are bent from the springs. What the heck etrailer

Etrailer Expert

Jenny N.

4/10/2023

You are right. I would be unhappy too. I will have our Customer Service team reach out to you.



by:

No one in town had these and I had no good reference numbers off of the old seal - etrailer's customer service reps helped me match up a new seal based on my axle make and bearing size and these are a perfect fit.

Wt H.

2/20/2015

Thanks for taking the time to follow up with me. Ive only put a few hundred miles of use on the trailer but everything is working great. Ive actually recommended etrailer to my father, a friend of mine and anyone at work who would listen made easier by the fact that I had everything I ordered shipped to my job instead of home. Barring an emergency situation that requires an immediate solution you have my business in the future.



by:

just packed wheel bearings on the boat. had etrailer seals in and replaced with the same. no leaks. great product and no hassle getting them

Richard K.

5/29/2023

these are the best seals for replacing and packing wheel bearing, they fit tight and allow no water to get in. The grease seals fit tight and allow no water to get in. And you cant beat the price. I always have a extra set on hand



by:

Well made the they are quite beefy



by:

Like others say great seal, good selection, fast delivery. I was a bit surprised at the E-Trailer packaging. I ordered 12 seals for 3 different SIZE trailers and all 12 were in ONE BAG. So some seals are VERY CLOSE in size to each other, like 2.33 x1.50 vs a 1.68. Needless to say you have to be a McGiver to be doing your own seals anyway, but I had to "Mike" each one and look for numbers on each & seperate for boat or Dune Buggy Trailers. Thats another thing, Taiwan & China ? And the numbers on these new seals are different than the standard Dexter Transcom National or NOK. Good thing my old seals had those numbers, these dont. Keep good NOTES ! Good Luck next owner if I sell.



by:

My son and I purchased an older tandem axle trailer so we could move a tractor we had also purchased. The trailer brakes were disconnected and inoperative, a couple of the hubs had moisture inside. We ordered new brakes bearing seals and bearings and rebuilt both axles. We received all the parts the next day, I don't know how they did it but they did.
We then loaded the tractor and all of the 3 point attachments and drove 450 miles without a problem.



by:

The seals from e trailer were an exact fit. Worked out extremely well since my original seals were discontinued by the company. This was a real lifesaver.



by:

Installation was easy. The etrailer videos are excellent and told me everything I needed to know to do this job correctly.

Glenn

4/25/2023

Great replacement for old seals. I used a 2X4 block of wood to set the seals with no issues.



by:

Good to have in reserve with a seal puller, grease,etc. You can’t count on every parts place having your size.

Charles

5/4/2023

No problems,these were bought as a spare set



by:

Again a Perfect fit for my 3500lb axels



by:

Seal is a seal. No packaging. (I take the box end with the part number and staple it to the wall of my shop to 'record' the P/N for future use. Or tape it to the wall of the trailer's interior for future reference. Can't do that if there is no box.)



by:

Stacy looked up my information to make sure I got the correct parts, because I got the wrong ones before. Not from E-tailer. they were perfect and she was very pleasant to work with.



by:

Have had no trouble with these grease seals after 1 year's worth of travel with our travel trailer. Used a MIL spec grease widely used on aircraft wheel bearings.



by:

They initially sent the wrong parts but sent the correct ones when notified of the problem. The parts fit perfectly and I took the trailer on a 27 day trip across the country without any issues. The parts are still working as they should a year later.



by:

I called to order Dexter grease seals and was not informed these were a non Dexter equivalent. while they did arrive in good condition they were packaged in a bubble mailer loosely with no real protection.



by:

Much less expensive than the bearing shop here.

Jim

10/10/2023

These seals are the deep, correct ones for trailers. Worked perfectly.



by:

I grease the wheel bearings on my travel trailer each Spring and replace the grease seals each time. These grease seals are easy to install and keep the grease the bearings and the dirt out.



by:

I repack the wheel bearings on my camper every other year and these grease seals are a necessary item.



by:

Etrailer parts always fit and shipping is ok



by:

Item ordered clearly says outer diameter of 2.56. Item received not even close to what i ordered. Outer diameter was 3.7. Inner diameter 2.1. Very unsatisfied, especially after waiting three weeks for the item to be delivered. Will never order from your store again.

Etrailer Expert

Jenny N.

11/28/2022

Oh my, I am sorry that we have sent you the wrong seal. Customer Service will be in touch to assist you.



by:

Customer service is the best! One of the original seals ordered had a manufacturing error. I called and talked to Marty. The replacements were sent out immediately, Thank you



by:

Product is fine but packaging was a joke. A very large box was used and only a small amount of kraft paper was used as cushioning. Six to eight of the brake assemblies could have been put in this box. Fortunately there was no damage to my assemblies. I thought that surely this would have been corrected given the number of people that have complained about it. I guess the complaints are not getting to the correct person with the authority to make a change.



by:

Perfect replacement seal, fit the dexter hub perfectly



by:

Seals are an exact replacement for a 20+ year old seal, fit tight, install great, will purchase again if needed



by:

The double lip grease seal for 3500# trailer axle is of sturdy quality and the fit was perfect. Fast shipping from etrailer.com. Will definitely order from them again.


25
1202
Show More Reviews

See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

  • Is Sealant Needed When Replacing Grease Seals and Dust Caps
    Sealant is not required when installing a grease seal, like # RG06-050 you referenced. The cap will not need a sealant either. See the help article I've attached that explains the entire process of replacing bearings, races, and seals. I've also attached a video on repacking bearings and installing grease seals you may find helpful.
    view full answer...
  • How to Pick Out Replacement Grease Seal for # GL-1719DL
    To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed....
    view full answer...
    Image 1 for
  • Are the Grease Seals part # RG06-050 Double Lip Seals
    Yes, the Grease Seals part # RG06-050 are double lip seals that do have the spring that holds the seal against the spindle. I attached a video on bearing repacking and grease seal installation that you might find informative as well.
    view full answer...
    Image 1 for
  • Replacement Grease Seals For Trailer With 3,500 Lb Axle
    It sounds like you have a 3,500 lb axle and are replacing the bearing seals. The closest seals to that size we offer are the TruRyde Seals for Trailer Bearings, part # RG06-050. These have an inside diameter of 1.719 and outside diameter of 2.565. I was unable to find the number you referenced, but the seal I mentioned above is a replacement for a Transcom part number 171255TB.
    view full answer...
  • Replacement Seal for Trailer Hub with Bearings L68149 and L44649
    For your seal dimensions that you listed the replacement seal part # RG06-050 that you mentioned.
    view full answer...
  • How To Determine Replacement Grease Seals On Fifth Wheel Trailer
    The TruRyde Grease Seals, part # RG06-050 are used on 3,500 lb axles. The inner diameter of the seal is 1.719 inches and the outer diameter is 2.565 inches. If that matches the dimensions of your spindle and your hub, then these will work great for you. You can also remove the seal from your hub and spindle and see if you can find the numbers as shown in the attached photo. If you cannot find the numbers on your seals, you can remove a hub from your axle and use a digital caliper like...
    view full answer...
    Image 1 for
  • Replacement Grease Seal for a NAPA 17144 Seal
    The seal that your mentioned and seal set # RG06-050 have the same inner and outer diameters so yes, you can use set # RG06-050 in place of 17144.
    view full answer...
  • Does Part RG06-050 Include a Pair of Seals
    Part # RG06-050 is a set of 2 grease seals for a 3500-lb axle. You will need one seal for each hub on your axle so one kit will work for your single axle trailer. These seals have an inner diameter of 1.719-inches (which matches up to the spindle's diameter) and an outer diameter of 2.565-inches (which matches up to the hub's inner bore diameter). The linked diagram may be helpful. This set of grease seals cross-references with the following other brands of seal: Dexter 010-019-00, Transcom...
    view full answer...
    Image 1 for
  • How to Pick Out Trailer Hub Grease Seal
    I cannot find any info on a seal with the part number TCM 40-3123 but I can help you pick out a hub seal. To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link to a page that has all of the grease seals we carry. You will need...
    view full answer...
  • How to Determine Which Replacement Grease Seals for 1997 Jayco 1207KB Travel Trailer
    The easiest way to determine which seals you have would be the positively identify the hub you have. Many times there'll be a casting number on the hub, like 8-247 for instance. If you reply with the casting number, I'd be happy to recommend the proper grease seal. Another way would be to provide me with the reference numbers from the inner and outer wheel bearing, along with the diameter of the spindle surface where the seal rides and the diameter of the hub bore on the inside of the...
    view full answer...
    Image 1 for
  • How To Find the Correct Replacement for a Victor 83187 Grease Seal
    I don't have any reference to the Vistor 83187 Grease Seal therefore in order to find a replacement for this you will need to measure the inner diameter (I.D.) and outer diameter (O.D.) with a digital caliper to the nearest thousandth of an inch. Once you have these two measurements you can then match them up to one of the options I have attached a list of for you below.
    view full answer...
  • Replacement Seal Recommendation for Dexter 010-004-00
    We have the exact seal you would need. For a pair you would want the part # RG06-050. This is a double lip seal that would work great for you. Double lip seals aren't only for EZ lube spindles. They are just basically a better sealing design than single lips seals and are a good idea for all hubs. Typically it's marine applications that have to have them since they do a better job keep water out but we still recommend them for everyone as there is basically no down side to using them.
    view full answer...
  • Replacement for Dexter Grease Seal 010-019-00
    Grease Seal # RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.
    view full answer...
  • Grease Seal for 1993 Wells Cargo With 3500 lb Axle and L68149 Inner Bearing
    The # RG06-050 seal you referenced is compatible with the L68149 inner bearing, but you should confirm it to be sure. To be absolutely sure, you can get the number off of your existing seals, if they are not torn up. If you look at the photo I have edited for you, you can see where the reference number is located. You might need a magnifier to see the numbers. If the number is not readable, you can use an accurate measuring device like a digital caliper to measure the diameter of the spindle...
    view full answer...
    Image 1 for
  • Replacement Grease Seal for Trailer Hub with Number P06887
    Based on the dimensions you listed the seals part # RG06-050 that you referenced will work great. These are close enough and are a double lip seal as well.
    view full answer...
    Image 1 for
  • Replacement Grease Seal for AL-KO Axle/Hub 08700
    The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern so for a grease seal you'd want the part # RG06-050.
    view full answer...
  • Correct Replacement for a 010-019-00 Grease Seal
    The correct replacement grease seal for your Dexter hub is the Grease Seal # RG06-050. This has been cross referenced and confirmed to be the correct replacement.
    view full answer...
  • Replacement for Dexter 010-019-00 Grease Seal
    The Grease Seal # RG06-050 is indeed the correct replacement for the Dexter 010-019-00. As far as the quality differences go between the 2 products we don't really have any apples to apples comparison information explaining the differences. We can look at the over 600+ reviews that give them a 4.8 out of 5 star rating. Many reviewers do attest to switching to them from Dexter seals and being happier. And there are many reviewers who came back after 1 year and still gave the product 5 stars.
    view full answer...
  • Install Video for Grease Seal on 3,500 lb Trailer Axle Hub
    Yes, if you check out the attached install video on this page you'll see how a 10-19 grease seal like our part # RG06-050 gets installed.
    view full answer...
  • Grease Seals for Boat Trailer to Replace Original NOK AC7269E Seals
    I was not able to find any specs on a NOK AC7269E seal but thank you for the photo. We do offer both single- and double-lip grease seals in a range of dimensions. Since I could not cross-reference your seal part number you can use our linked page for grease seals to find a suitable replacement. You'll just need to take precise measurements of your trailer's spindle at point B as shown in the linked diagram and of your hub's inner bore. These two dimensions match up to the inner and outer...
    view full answer...
    Image 1 for Image 2 for
  • Are Grease Seals RG06-050 a Direct Replacement for Timken Seals 171255
    You are correct, the Grease Seals 10-19 pair, part # RG06-050, are the direct replacement for the Timken seals 171255. You can view some additional information on replacing trailer hub components at the links provided.
    view full answer...
  • Replacement Grease Seals for 1994 Shorelander Boat Trailer with L44649 Bearings
    The grease seals you will need for your 1994 Shorelander Boat Trailer is the Tru Ryde Grease Seals # RG06-050. These seals are made to fit with L44649 bearings. These seals have the retainer spring referenced in your manual. The presence of the retainer spring is what makes the # RG06-050 double-lip grease seal. I attached an installation video for these grease seals you may want to check out.
    view full answer...
  • Installing Seal to Replace TCM 171255VB Trailer Seal
    The old seal you have pictured is certainly a single lip seal. Which can be replaced by a double lip like # RG06-050. A double lip seal basically means the seal has a spring to reinforce the rubber seal. From the looks of your pictures the one that isn't fitting the same doesn't appear to be a typical trailer grease seal. I see what you mean because the rubber seal does look to be going the other direction and that could cause an issue with grease leaking if it doesn't make a tight...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • My New Grease Seal Depth Is Different From The Depth Of The Original Grease Seal, Is This Okay?
    It would appear the the new seal SKR 17144 is a single lip seal and the Grease Seal # RG06-050 that you originally had is a double lip seal. That is the only difference that I can find on the seals. The double lip is better at keeping dirt and water out and the clean grease in. You will have a little play between the grease seal and the inner bearing on the hub, without it the bearings could cause damage to the grease seal. Once you slide the hub onto the spindle the grease seal will...
    view full answer...


< Previous
123. . .17



Do you have a question about this Trailer Bearings Races Seals Cap?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Zack K
Video Edited:
Zack K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.