bing tracking image
  1. Trailer Brakes
  2. Dexter Axle
  3. Electric Drum Brakes
  4. 3500 lbs Axle
  5. 10 x 2-1/4 Inch Drum
  6. 14 Inch Wheel
  7. 14-1/2 Inch Wheel
  8. 15 Inch Wheel
Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K

Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K

Item # 23-468-469
lowest price pledge
Our Price: $253.71
Trailer Brakes
This item qualifies for Free Shipping
Shipping Weight: 21 lbs
Quantity: 
In Stock
Dexter Axle Trailer Brakes - 23-468-469
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 3,500-lb axles. Mounting flanges have a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fit 14" to 15" wheels. Lowest Prices for the best trailer brakes from Dexter Axle. Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K part number 23-468-469 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1832)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Brakes - 23-468-469

  • Electric Drum Brakes
  • 3500 lbs Axle
  • 10 x 2-1/4 Inch Drum
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snow Trailer
  • Utility Trailer
  • Self Adjust
  • Dexter Axle

10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 3,500-lb axles. Mounting flanges have a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fit 14" to 15" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power
    • No need for manual brake adjustments
    • Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
  • Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, mounting hardware, and plugs included


Specs:

  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange: 4 bolt
    • Mounting flange bolt hole distance: 2-7/8" apart on center
  • Wheel size: 14" and 15"
  • Axle rating: 3,500 lbs


23-468 10" Nev-R-Adjust Electric Brake Assembly for 3.5K Axles - LH

23-469 10" Nev-R-Adjust Electric Brake Assembly for 3.5K Axles - RH






Customer Reviews

Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K - 23-468-469

Average Customer Rating:  4.9 out of 5 stars   (1832 Customer Reviews)

10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 3,500-lb axles. Mounting flanges have a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fit 14" to 15" wheels.

- 23-468-469
by:

Installed these before taking a long trip up into the Colorado mountains. Amazing upgrade from my original brakes that kept locking up on me. Never having to manually adjust them is a big plus. Takes the guesswork out the picture.



- 23-468-469
by:

Replaced obsolete Warner brakes with the Dexter brake kit. Installation was incredibly easy after watching the video



- 23-468-469
by:

Not happy at all about this purchase. I have done extensive troubleshooting on these brake assemblies but they just don't provide adequate stopping power for the empty trailer much less with a load. Tried multiple vehicles even put a better quality plug than the brand new chinese one from etrailer. Telephone support twice and still no helpful suggestions.


Comments
I will have our customer service team reach out to you. I recommend breaking in the brakes. The break-in process applies to both manual adjusting and self-adjusting electric brakes. Its necessary to do this step when you install new brakes because it allows the brake shoes and magnet to seat into the drum. We have a FAQ about adjusting the brakes that covers breaking in the brakes very well.
-- Etrailer Expert Jenny N - 01/21/2022


- 23-468-469
by:

Everything fit just right wired up just fine takes a little while to break these things in but once they start biting they work really nice I did a little bit more than just replace the brakes I did the shocks, springs and equalizer then re-painted everything underneath too,pretty much rebuilt the entire suspension sure makes a difference. I'm including some before and after pictures here they're probably out of order but them's the berries folks !



- 23-468-469
by:

Excellent product. Had minor grinding to perform to weld on axle Plates. Would recommend to everyone installing brakes on a trailer. Was very surprised to have the quick turn around time from ordering and receiving. Will definitely use etrailer in the future. Thanks


Comments
best money spent on the trailer. Great products
Sam M - 11/12/2021


- 23-468-469
by:

Etrailer readily assist in finding the right parts for my repairs. These brakes were incredibly easy to install and work very well. I haven't used them long enough to know, but I hope the self adjusting feature works as good as on my other vehicles.


Comments
Still perfect after a year. etrailer continues to provide support for all my trailer needs, and I have many!
Bradford S - 04/14/2022


- 23-468-469
by:

I ordered These Dexter brakes on Sunday and had them by Wednesday. These brakes are very good quality. They came fully assembled with mounting hardware, and fit perfectly. Installing these replacement brakes is a great solution to rebuilding old worn brakes.


Comments
After replacing these brakes last year I moved about 600 miles closer to family. I installed these brake assemblies on my snowmobile trailer that I used to move all our belongings. In total I put about 7000 mi on this trailer during that move. I did not experience any issues with these brakes, not even an adjustment. I would highly recommend this product and would purchase again.
Richard B - 03/21/2022


- 23-468-469
by:

I was replacing the 20 year old electric brakes on my utility trailer and choose the Dexter Nev-R-Adjust electric trailer brake kit. The non Dexter brand cost less but after adding shipping and adding the nut kit they were the same as the Dexter brakes with free shipping and the nuts were included with the Dexter kit. This was one the easiest projects I have ever done. I had recently replaced the bearings so getting the brake drum off was a breeze. I used butt connectors with the heat shrink insulation wot connect the power to the bakes. I had thought this would be a two day project but did both sides in about 3 hours. And best of all, the new brakes function as they should, it was like I did not have electric brakes before. Again an easy and well worth it project.


Comments
It has been a year since I installed the Nev-R-Adjust electric trailer brakes and they are still doing a great job. In October Hurricane Michael struck and I have used the utility trailer more than I ever anticipated and have had zero problems from the brakes. Moving equipment & debris became a daily task.
Mitch M - 03/18/2019



- 23-468-469
by:

The trailer brake assembly is working great. I put about 6500 miles on our lance camper last year and we are getting ready for another long trip this month. I think the assembly and new drums were the best fix in my case. Thanks again



- 23-468-469
by:

These brake assemblies were an exact fit for my Dexter Axle. The kit came with everything needed to change it out, including the bolts to attach the brake backing plate. Very straightforward instructions. Fast shipping. I would recommend E-Trailer for any parts.


Comments
I recently removed the brake drums to check the brake pad wear and found the pads to be wearing evenly and no adjustment was needed. Self adjusting brakes are the way to go as an easy upgrade to the brake system.
David - 05/15/2019



- 23-468-469
by:

Up here in the Pacific Northwest, brakes will corrode and freeze up over the course of a few winters. These will restore original performance. Easy install takes an afternoon to complete, which for me included repacking the wheel bearings. Four stars instead of five because I wish the brake linings grabbed a little more aggressively.



- 23-468-469
by:

Installation was very easy, I removed the old brakes and the new went right on. Use a torque wrench to tighten the nuts. I would do the initial adjustment by hand to save time. The self adjusting feature is great, they work well.



- 23-468-469
by:

Fit is perfect. Chose to replace brakes with assemblies because trailer is 23 yrs old. Good call. The pain was getting old assemblies off. Had to cut fasteners with 4/12" grinder. New Assembly fits bolt pattern. Torqued backing bolts, repacked bearings, installed new grease seals (note buy separate) and took out for break in drive. Brakes work great. I've used assemblies in past and they are the way t go in my opinion.



- 23-468-469
by:

Replaced the Axel Teknology made in China brakes that failed due to poor grease seals with Dexter brand made in USA. All parts made in a ISO 9001 facility. MAGA! New brakes perform great.


Comments
Brakes are working great and should for a long time. See more trailer manufacturers are using Dexter now. Buy products made in the USA!
Jim - 08/15/2019



- 23-468-469
by:

I recently started trying to figure out the parts that I would need for my trailer. When I contacted etrailer the folks there were very knowledgeable and new exactly what I needed to get me up and running again. I would recommend them for your trailer needs and will not hesitate to use them in the future!



- 23-468-469
by:

Very helpful customer service. Installation was smooth and so are the brakes after about 100 mile wear in.



- 23-468-469
by:

I bought and installed Dexter self adjusting brakes on my 17 foot camp trailerabout a year ago. Installation was easy for someone like me with some auto mechanic skills. The brakes work well and I don't need to worry about periodically adjusting them.



- 23-468-469
by:

Easy to install and working great after a year. I love the self-adjusting feature! I could never get my old brakes adjusted right and it was obvious that they were not all carrying their fair share of the load when I replaced them.



- 23-468-469
by:

Good prices. Order filled and shipped quickly. I had to repair the R side backing plate. The self adjust cable came off and one shoe was on improperly. The keeper for the magnet wires was missing, so I had to use one from my old backing plate. I think maybe that backing plate was a return. I don’t like giving a below average review but what it is.


Comments
Thank you for letting us know! Our customer service team should be reaching out to you in the near future.
-- Etrailer Expert Brooke M - 10/01/2021


- 23-468-469
by:

One of the easiest brake jobs you'll have to do. Squirt a little WD40 on old nuts, or something similar, and let sit a while. Disconnect wires, undo nuts, pull assembly off. Put new assembly on, make sure they are on correct side( it matters, watch video). I ordered the nut and lock washer set, just to be sure. These came with just the nut, so you could get the washers separately. Tighten nuts to proper torque, as stated in directions, connect wires, and done. I also ordered the plug kit for adjustment window. You need two per side. These did come with them, but good for me that I ordered more, as one arrived chopped in half. Can't knock points off for that.



- 23-468-469
by:

I was blown away by how fast the brakes were delivered. I was told March 1st and they showed up February 26th! I had factory installed standard Dexter brakes before and installed the Nev-R-Adjust Dextor brakes and they were an easy swap-out. I haven't burnished in the new brakes yet but after a driving a few laps around the neighborhood they seem to work just fine.



- 23-468-469
by:

I called etrailer with little knowledge of the parts I needed for my project. I changed my boat trailer from old surge hydraulic brakes to electric. With the expert help of Bryan W. I received all the proper parts from brakes to bearings. I’m super satisfied with the support and products. I will recommend etrailer to anyone looking for great service



- 23-468-469
by:

These made it easy to retrofit my box trailer with brakes. The customer service was beyond great, thanks Robert!



- 23-468-469
by:

Well the products I ordered are OEM Dexter, so no problem with the parts. Now packaging by etrailer was sub par. All 104 pounds just loosely thrown into a big box. Box was bursting open and parts of the drum caps were dented and missing.


Comments
Sorry to hear about this. Customer Service will reach out to you.
-- Etrailer Expert Sierra K - 09/29/2021


- 23-468-469
by:

WOW! Got the exact parts I ordered, free shipping, delivered within three days and the best tracking info ever! Will definitely buy from etrailer again. Thanks!


37
1899
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Brakes



  • Dexter Never Adjust Brakes Initial Adjustment on Tandem Axle Trialer
    The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 are not designed to be manually adjusted in the way you are describing. There isn't really a way to back off the adjustment because they are designed to automatically adjust as needed to maintain correct tension. For adjustment, you should take the trailer to a safe level location where you can hit the electric brake controller hard a few times. To adjust the brakes, the initial...
    view full answer...
  • Self-Adjusting Electric Drum Brakes Suitable for 17-Inch Wheels
    Dexter Nev-R-Adjust 10 x 2-1/4-inch Electric Trailer Brake Kit # 23-468-469 will work with 13-, 14- and 15-inch trailer wheels. It is not compatible with 17-inch wheels. Self-adjusting electric drum brakes that are compatible with 17-inch wheels are shown on the linked page. These are rated for use with axles having 7K to 15K weight ratings. Note that these are all larger diameter and wider brakes that the 10 x 2-1/4-inch Dexter kit. Be sure to choose a kit based on your axle weight...
    view full answer...
    Image 1 for
  • One Dexter Nev-R Adjust Electric Brake Assembly Locking Up On Gooseneck Trailer W/ 7000lb Axles
    Since you only have one tire locking up on your triple axle gooseneck trailer it sounds like the Dexter Nev-R Adjust Brake Assembly could have a short close to the assembly locking up. I recommend checking the connectors and wiring for the assembly locking up for any damage, exposed wire, or a loose connector that could be causing your issue. If the connectors and wiring are all secure and have no damage, I recommend checking the brake assembly on the opposite side to ensure you are getting...
    view full answer...
  • Dexter Self Adjusting Brake Assemblies for 2006 Casita Travel Trailer with 3,500 lb Axle
    I don't know which specific 2006 Casita travel trailer you have, but if your Dexter axle is a 3,500 lb capacity axle then the brake kit part # 23-468-469 that you referenced would be the correct kit. Typically you can find the axle capacity on a plate near the coupler of the trailer with the VIN or you can measure the diameter of the axle. If it's 2-3/8 inch in diameter then you do have a 3,500 lb axle and this kit is the correct setup.
    view full answer...
  • Brake Shoe Thickness and When to Replace Dexter 3,500 Brake Pads
    I went out into our warehouse to measure the pad thickness of a Dexter 3,500 10 by 2-1/4 inch brake assembly like the part # 23-468-469 and just the brake pad portion of the shoe measured .18 of an inch. The entire shoe thickness was .29 of an inch and the metal portion of the shoe measured .11 of an inch. Dexter says they need to be replaced when the pad material gets down to 1/16 of an inch (.0625) or less.
    view full answer...
  • Replacement Brake Assembly Set for Lippert 3,500 lb Trailer Axle
    The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 that you referenced would be exactly what you need for the 3,500 lb Lippert axle you have on your trailer. This is a set that includes a left and right hand side plus they are self adjusting which is nice.
    view full answer...
  • Can Dexter Electric Brakes be Used in Saltwater and Freshwater
    Yes, electric brakes like the # 23-468-469 can be used on boat trailers that see salt water and fresh water. It's a smart idea to unplug the trailer wiring before backing the boat into the water but we realize most people do not do this. The part # 23-468-469 that you referenced is a set of self adjusting brake assemblies that fit 3,500 lb axles that are 10 inch in diameter.
    view full answer...
  • Troubleshooting Weak New Brakes on Trailer Rear Axle
    Since it sounds like you performed the initial brake adjustment correctly and have given them a bit of time to self-adjust by simply pulling the trailer, the issue you are having may be coming from a weak ground. I recommend checking both brake assemblies on the rear axle to make sure the ground wires are securely connected to a clean, bare metal surface on the trailer frame. Make sure there aren't any exposed areas on the wiring around the assemblies that need to be replaced. Also just...
    view full answer...
  • How to Pick Out Replacement Axle for Trailer
    The numbers you mentioned aren't part numbers so they would not give me enough info to let you know what you'd need as a replacement. You are going to need to measure your current axles in a few places to get the correct one. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well. I also attached a link to a page with...
    view full answer...
    Image 1 for
  • How to Pick Out Replacement Brake Assemblies for 2012 Forest River 6502 Vibe
    I'd need to know the capacity of the axle(s) on your trailer as well as the diameter of the drums. Most likely you have 10 inch brake assemblies and would want the part # 23-468-469 for a pair of left and right assemblies that are self-adjusting. These are 3,500 lb axle assemblies that self adjust instead of requiring you to adjust the brake tightness.
    view full answer...
    Image 1 for
  • Recommended Electric Brake Assemblies for 2005 Jayco EXP Trailer
    Based on my research, it does appear that your 2005 Jayco trailer is equipped with 3,500 pound axles. With this in mind, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 referenced in your question is most likely the correct assembly. You will just want to measure the diameter and depth of your existing drums to ensure these will fit. These brake assemblies measure 10 inches in diameter and 2-1/4 inches deep. These assemblies also have a 4 bolt mounting flange pattern. You...
    view full answer...
    Image 1 for
  • Trailer Brake Assemblies for 2008 Forest River Car Hauler
    There is a way for you to find the brake assemblies which are going to work for you, though we would be unable to do so with just your VIN. In order to find the correct assemblies, you would need to know your axle's weight capacity, the size of your wheels, your mounting flange bolt pattern and the inside diameter and depth of your hub. For example, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 is for 3,500 lb axles with 13", 14" or 15" wheels with a 4 bolt mounting flange...
    view full answer...
  • Should I Use 10 or 12 Inch Brakes on a Trailer with 3,500 Pound Axles and 16 Inch Rims
    Brakes are designed to fit the hubs that fit the axles not the rims. So you want to stick with 3,500 pound, 10 inch brakes like the Dexter Nev-R-Adjust, part # 23-468-469. Larger 12 inch brakes won't fit your hubs. It is more common to see 15 inch rims on a 3,500 pound axle but a long as your bolt pattern matches and you have the clearance 16 inch rims can work. But even the larger rims use the same size brakes because they're using the same size hubs.
    view full answer...
  • Replacement 10 inch Brake Assembly Recommendation for Trailer
    Thanks for the picture and dimensions of the assemblies you have on your trailer. From that info I know that the Dexter left and right hand assemblies part # 23-468-469 would fit and work well. These are self adjusting brake assemblies too which is nice as they don't require you to ever have to adjust them.
    view full answer...
  • What is Torque Value for Installing 10 inch Dexter Brake Assemblies on Trailer
    I called my contact at Dexter about the 10 inch Nev-R-Adjust brakes like part # 23-468-469. They told me when you are installing the brake assemblies to the brake mounting flange, the torque should be between 45 and 50 ft lbs.
    view full answer...
  • Self-Adjusting Brakes Will Not Lock Up Trailer After Fresh Install
    It does take a few good and hard stops at full power (12 volts) in order to set the braking adjustment on a set of self-adjusting braking assemblies. That said, I would first make sure you are getting a full 12 volts out of your brake controller first. In order to do this you will need to turn the power settings up to max, usually with a knob or buttons on the exterior of the unit. Once you have power at the max settings have a friend apply the manual override which is usually a bar or...
    view full answer...
  • How to Pick Out Brake Assemblies for Toy Hauler
    I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # 23-468-469 is a 10 inch by 2-1/4 inch thick brake assembly set. You also want to determine what the bolt pattern is of your assembly...
    view full answer...
    Image 1 for
  • Trailer Brake Assembly Installation to Ensure Correct Side of Trailer
    If you install the brakes on the opposite side, they will not work to the same capacity but you will still get some braking. You will want to make sure you correct the problem so that you can get correct braking and not prematurely wear down your brake shoes and magnet. The brake magnets will move the brake shoes against the inner wall of the drums. This is a mechanical movement that puts the correct pressure of the smaller brake shoe (on front side) and larger brake shoe (on back side)....
    view full answer...
    Image 1 for
  • Troubleshooting Weak Braking After Installing New Dexter Electric Brakes on Trailer
    If you have self-adjusting assemblies like the Dexter Nev-R-Adjust Brake Kit # 23-468-469 installed on your trailer, they will indeed continue to adjust as you pull the trailer around. It does sound like you performed the initial manual adjustment correctly, so you should see improved performance as you continue to use them. Driving around in a parking lot and using the brake controller's manual override like you mentioned is a good way to do this. Otherwise, since the brakes were recently...
    view full answer...
  • New Dexter Nev-R-Adjust Trailer Brakes are Not Locking Up
    You are not wrong but at the same time you do not want trailer brakes to lock up. The brakes you have, # 23-468-469, are self-adjusting but it takes some time for the shoes to extend out far enough for normal braking. This is why we recommend making an initial adjustment at the time of installation. That way you don't have to wait for them to adjust out themselves. After this initial adjustment you won't have to adjust them again. I have included a link to a video that shows how to make...
    view full answer...
  • Replacement Dexter 3,500 lb Trailer Brake Assemblies
    Due to the amount of rust on your trailer brake assemblies it's a good idea to replace them since it sounds like they aren't working well and are rusting to the point that they might fail altogether soon. For a set of self-adjusting brake assemblies for your Dexter 3,500 lb axles the Dexter Nev-R-Adjust kit part # 23-468-469 would be your best option. Once installed they might feel a little weak at first but once you apply the brakes a few times they'll tension themselves to the proper...
    view full answer...
    Image 1 for
  • Difference Between Dexter Trailer Brake Assemblies and Other Brands
    Biggest difference is the Dexter assemblies part # 23-468-469 are made in the US and have basically the best reputation for trailer brake assemblies. If you are looking for the nicest setup that would be the most reliable this would be the route I would recommend.
    view full answer...
  • Self Adjusting Brake Assembly Recommendation for 2011 Komfort Trailblazer
    Yes, you definitely can replace your current 10 inch brake assemblies with self-adjusting assemblies. The part # 23-468-469 that you referenced would be exactly what you would need. This pair will fit and give you self adjusting brake assemblies. If at first the brakes seem weak what you will want to do is apply them several times while the trailer is moving so that they tension themselves properly. Once you do that they'll never need any type of adjustment.
    view full answer...
    Image 1 for
  • Can Different Brand Brakes Be Used On Front and Rear Axle
    Yes, you can absolutely use the Dexter Nev-R-Adjust Brake Kit # 23-468-469 on one axle and a different brand, like Lippert, on the other. You can even use manual adjusting brakes on one axle and self adjusting brakes on the other; this will not cause any issues as long as you use the same style on each individual axle. I've attached a helpful installation video for you at the bottom of the page.
    view full answer...


< Previous
123. . .14



Do you have a question about this Trailer Brake?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer brakes for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer brake information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Kathleen M
Video Edited:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.