Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs

See what our Experts say about this Dexter Trailer Brakes

• Replacement Trailer brakes for a River Wildwood 30KQBSS
  It sounds like your 2018 Forest River Wildwood 30KQBSS Travel Trailer has a bad brake assembly. Since you are still having issues with the trailer disconnected we can rule out a ground or wiring issues. We have both a left and right hand assembly available depending on which side of your trailer you're having problems with. For the Left Hand side you will want the Dexter Electric Brake Assembly for 4.4K Axles item # K23-462-00. For the Right Hand side you will want the Dexter Electric...
  view full answer...
• How To Confirm Fit of Dexter 4,400 lb Electric Trailer Brake Kit K23-462-463-00
  The Dexter Electric Trailer Brake Kit part # K23-462-463-00 is designed for 4,400 lb axles with a four bolt mounting flange. If this is what you have then it will work great. The axle capacity can be found on the axle tag sticker in the center of the beam. Unfortunately, we cannot look up parts for any one specific trailer. The kits is for two assemblies.
  view full answer...
• Does Going with Higher Rated Brake Assembly Give you Additional Braking Strength
  The magnets between differing trailer brake assembly capacities aren't more powerful than each other so much as they are different in sensitivity. You don't gain any power going with a higher rated assembly than you need. You actually just end up with a harder to adjust braking setup. It will seem like either the brakes are applying to hard or too soft without any middle ground. That's why your best option is to go with the exact capacity you need.
  view full answer...
  
• Left and Right Hand Brake Assembly Set for 4,400 lb Trailer Axle 2009 Keystone Sprinter
  Yes the Dexter Electric Trailer Brake Kit part # K23-462-463-00 is a left and right hand brake assembly that fits your 4,400 lb trailer axle. This would be the exact kit you'd want for your 2009 Keystone Sprinter travel trailer.
  view full answer...
• Replacement 10" x 2-1/4" Brakes for 4,400 lb Axle Capacity
  Thank you for all of the information! It sounds like you're needing the Dexter Electric Trailer Brake Kit # K23-462-463-00 which are 10" x 2-1/4" brakes rated for 4,400 lb axles. The mounting bolt pattern measures 2-7/8" apart at the top and 3-1/4" apart at the bottom as you can see in the attached photo. I'm also linking a review video for you to check out.
  view full answer...
  
• Replacement Electric Brakes For A Dexter 4,400 Pound Axle
  We have just the perfect electric trailer brakes for your Dexter Axle! The Dexter Electric Trailer Brake Kit # K23-462-463-00 comes with one left and one right brake that measure out to have a 10 inch diameter by 2-1/4 inch wide. The mounting flanges have a 4-bolt pattern, and will 14 inch to 15 inch wheels. When measuring the bolt pattern the measurement from center of top mounting stud to center of top mounting stud is 2-7/8 inches. The measurement from the center of bottom mounting...
  view full answer...
  
• Replacement Nuts for Trailer Brake Assemblies
  We sell replacement nuts for trailer brake assemblies with the part # BIK-00.
  view full answer...
• Replacement Electric Brakes for 4,200 lb Axle on Coachmen Apex Nano Trailer
  Though I would not be able to answer for parts that are on your trailer now, it is a good idea for your brakes to match your axle's weight capacity. As for a replacement, I could not find a reference to the brakes you have now, and the only replacements that fit a 10" x 2-1/4" drum have a 4-bolt mounting flange or a very specific 4-bolt flange with 2.83" x 2.83" spacing. Since the brake kit you referenced has a 4-bolt flange do you have 2.83" x 2.83" spacing or need a different size?
  view full answer...
  
• Recommended Dexter Electric Drum Brakes for 4000-lb Axles on 5th Wheel Trailer
  We have electric drum brakes rated for 4400-lb axles (and hydraulic drum brakes rated for 3750- and 5200-lb axles) but none rated for exactly 4000-lbs. For electric drum brakes in the 10 x 2-1/4-inch size for a 5th wheel the 4400-lb-rated brakes will be fine. I suggest using Dexter kit # K23-462-463-00 which is a left- and right-hand set of manual-adjust brakes with the 4-bolt mounting pattern. These work with trailer wheels from 13- to 15-inches. When you install the new brakes either...
  view full answer...
• Replacement Electric Brake Kit for 2005 Keystone Sprinter Travel Trailer
  If you have the original 4,400 lb axle on your 2005 Sprinter travel trailer then the 10" Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 # 23-454-455 is the kit that you need. If your 4,400 lb axle is made after 2009 then you need the Dexter Electric Trailer Brake Kit # K23-462-463-00 instead. Attached are some review videos for you to check out.
  view full answer...
• How to Determine if 4,400 lb Electric Brakes Fit Trailer
  We don't have a way of knowing the brakes that fit your 2005 Fleetwood Coleman Niagara trailer, but can tell you how to find out if the 4,400 lb Dexter Electric Trailer Brake Kit # K23-462-463-00 will fit. The only way to do this is to know your mounting bolt pattern and the diameter and depth of your trailer's drum. You need to have a 4-bolt mounting flange like part # 4-35, and the inside depth of your drum needs to measure 10" diameter x 2-1/4" wide. If you have those specs you will...
  view full answer...
• Replacement Brake and Hub Assemblies for Travel Trailer
  To help you with replacement drums and brake assemblies, I need more information on your 2011 Keystone Outback 260FL. I need to either know the bearing numbers and seal number or know a few spindle dimensions. The bearing numbers can be found by pulling one hub and looking at the face of the inner and outer bearing. Each one will have a number printed into the face of the bearing. The seal will also have a number printed into it. If you can't find these numbers, then we will need to...
  view full answer...
  
• Brake Assemblies for Rockwood Signature Ultra Lite 5th Wheel with ALKO 4K Torsion Axles
  Based on my research, it looks like your 2006 Rockwood Signature Ultra Lite camper has a tandem axle setup and the axles are 4,000 lb AL-KO torsion axles.There should be a label on the axle listing the manufacturer and the weight rating of the axle so that you can confirm these are the axles on your trailer. From there we will want to measure the brake assembly's mounting flange to make sure we get the correct replacement assemblies. We'll need to measure the top bolts center to center,...
  view full answer...
  
• Replacement Trailer Brakes for Tandem 3,700 lb Axle Trailer
  Trailer brakes can definitely wear faster depending on the style of driving and the terrain, but that sounds like excessive wear. You should get way more than 3,000 miles out of a set of brakes. With your axles you must be using the 4,400 lb assemblies instead of the 3,500 lb assemblies. For the replacements I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K # K23-478-479 or the manual assemblies # K23-462-463-00. If your brake...
  view full answer...
• Replacement Trailer Brake Assemblies With 4-Bolt Holes Spread 2-7/8" on Top and 3-1/4" on Bottom
  It sounds like you need the Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 or Dexter Electric Trailer Brake Kit # K23-462-463-00 for your 5th wheel trailer. These 10" x 2-1/4" brake assemblies are for 4,400lb axles and have a bolt mounting pattern of 2-7/8" on the top bolts, 3-1/4" on the bottom bolts and 3" from the top to the bottom bolts. All measurements are bolt hole center to bolt hole center. The Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 is my recommendation...
  view full answer...
  
• Replacement Brake Assemblies for AL KO 4,400 Trailer Axle
  For 4,400 AL KO trailer axles the correct replacement brake assemblies are part # K23-478-00 for the left hand side and part # K23-479-00 for the right hand side. It is much easier to just replace the assemblies instead of trying to individually replace all of the components. It often ends up costing about the same as well.
  view full answer...
• Replacement Brakes for a 2011 Jayco Jay Flight G2 32BHDS
  It looks like the gross weight rating of your Jayco Jay Flight G2 32BHDS is 9,950 pounds. I am thinking that it has two 5,200 pound axles OR two 4,400 pound axles because they assume the tow vehicle is supporting 13 percent of the trailer tongue weight. If they are 5,200 pound axles then you would need 12 inch brakes with a 5 bolt mounting pattern such as # AKEBRK-6. If they are 4,400 pound axles then you would need 10 inch brakes with a 4 bolt mounting pattern such as # K23-462-463-00. You...
  view full answer...
• Replacement Brake Assemblies for Trailer with 4,400 lb Axles
  We don't have the brake pads you would need but we do have replacement assemblies with part # K23-462-463-00 which comes with a left and right assembly for your axle.
  view full answer...
• How Thick Are Brake Shoes of Dexter Electric Trailer Brake Kit For 4400lb Axles K23-462-463-00?
  The brake shoes on the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs # K23-462-463-00 needed for your 4400lb trailer axle measure .18" thick, and if measuring the braking material and the metal backing plate measures .29" thick. I included a video of the # K23-462-463-00 for you to take a look at.
  view full answer...
• Replacement Trailer Brakes with Parking Brake
  I have a set of Dexter electric brakes that will fit your trailer with parking brakes # K23-086-087-00, however they are rated for 3,500 lbs. This is a right and left side kit. Deciding on this kit will be determined how much you tow on your trailer. The # K23-086-087-00 provides parking brakes. For the front axle you can use # 23-468-469 which is also a pair for left and right assemblies.
  view full answer...
• 10" Electric Trailer Brake Assemblies For 4,400LB Axles With 3-1/4" Lower Bolts and 2-7/8" Top Bolts
  The Dexter Electric Trailer Brake Kit # K23-462-463-00 and Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 for 4,400LB axles have a similar bolt pattern. They have 2-7/8" measured on the top 2 bolts and 3-1/4" spread on the bottom 2 bolts, so either the numbers got entered in the wrong order or someone may have flipped the axle rather than using the proper Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. The brakes are still the 10" diameter by 2-1/4" wide.
  view full answer...
  
• Adjustable Electric Trailer Brakes for 4,400 lb Axle
  Thank you for the photo, which has your axle's capacity at 4,400 lbs; what that means is the correct self-adjusting trailer brakes are the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs # K23-478-479. If instead you were referring to brakes which are manually adjustable then you would need the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs # K23-462-463-00; you would also need the Brake Adjustment...
  view full answer...
  
• Replacement Electric Brakes for a Dexter 4,400 Pound Trailer Axle
  There should be a tag or information stamped into the axle. It sounds like you have the D44 axle which is a 4,400 pound Dexter axle. If it was made after May 1, 2009 then Dexter lists brakes # K23-462-463-00 as the correct brakes for the axle. If the axle was made before May 1, 2009 then the correct brakes are # 23-454-455.
  view full answer...
• Do 4400-lb Electric Drum Brakes Use Same Mounting Pattern as 3500-lb Brakes
  All of our 10 x 2-1/4-inch electric drum brakes for 3500-lb axles use a 4-bolt mounting pattern and this is the same as the 4400-lbs brakes we offer such as Dexter self-adjusting brakes # K23-478-479 and standard brakes # K23-462-463-00.
  view full answer...

Do you have a question about this Trailer Brake?