Get rid of annoying drips with this handy rubber railing. Sticks in place to function like a gutter, diverting rain away from any trouble spots where running water is giving you problems. Adhesive backing is pre-applied for an easy DIY install.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna a look at this 10-foot-long, stick-on drip rail rubber seal for RVs and enclosed trailers. I wanna zoom in just to show you what the seal looks like. You can see it is a drip rail rubber seal which will help divert water away from the doors, windows, and slide-outs on your RV or enclosed trailer. It is designed to shield the adhesive from runoff while providing a flush-mounted look.
If you really look real close the actual adhesive right here is recessed in and then it has a little skirt at the top. So when this is installed, this will actually cover it to keep anything from getting to that seal or to the adhesive. This will protect the RV from extreme weather and pests. It is constructed of an EPDM dense rubber so will not shrink, crack, or fade over time. And it is resistant to UV and ozone exposure.
As we've mentioned, if you look on the back here, it has the peel and stick installation with a pre-applied 3M adhesive backing. Basically you just simply peel off this backing paper and then apply the seal. It does come with the two alcohol prep pads for cleaning the surface for applying the seal and the dimension on this is 10 foot in length. It is a 1/2 inch wide and the height is 7/8 of an inch tall. This part is made in the USA.
But that should do it for the review on the 10-foot-long, stick-on drip rail rubber seal for RVs and enclosed trailers..
Average Customer Rating: 5.0 out of 5 stars (8 Customer Reviews)
Get rid of annoying drips with this handy rubber railing. Sticks in place to function like a gutter, diverting rain away from any trouble spots where running water is giving you problems. Adhesive backing is pre-applied for an easy DIY install.We had a repair and needed to replace drip edge around top of window. Fast and great product.
We have added this trim to our Homemade Happiness camper we built. Have no had any issues with the trim, fit was great, easy to apply and no leaking over joints of roof and side walls to camper that are covered with fiberglass and resin, primer and paint.
After one year, still good to go. etrailer is the Best!!!
The product help channel rain away from my RV windows. It works wells doing just that.
Do you have a question about this Trailer Door Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.