bing tracking image
  1. Trailer Fenders
  2. etrailer
  3. 14 Inch Wheels
  4. 15 Inch Wheels
  5. For Single-Axle Trailers
  6. Steel
Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1

Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1

Item # HP36VR
Our Price: $72.84
You Save: 10%
Trailer Fenders
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. 16-Gauge, cold-rolled steel is built to last. Bolt or weld onto your trailer. Great Prices for the best trailer fenders from etrailer. Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 part number HP36VR can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2301)
  • Q & A (0)
  • Photos

etrailer Trailer Fenders - HP36VR

  • 14 Inch Wheels
  • 15 Inch Wheels
  • For Single-Axle Trailers
  • Steel
  • 32 Inch Long
  • Bolt-On
  • Weld-On
  • 9 Inch Wide
  • No Step
  • etrailer

9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. 16-Gauge, cold-rolled steel is built to last. Bolt or weld onto your trailer.


  • Rounded fender with backing plate covers 1 tire on your single-axle trailer
    • Fender blocks road debris from hitting other vehicles and helps protect your trailer's cargo
    • Backing plate adds extra protection for the side of your trailer
  • 1" Wide outer edge is rounded
  • Sturdy, 16-gauge, cold-rolled steel construction
    • Prime and paint the fender to get corrosion protection and to match your trailer's finish
  • Weld-on or bolt-on installation
    • Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
  • Made in the USA


  • Application: single-axle trailers with 14" to 15" diameter wheels
  • Dimensions: 32" long x 9" wide x 15" tall
  • Quantity: 1 fender
  • Weight: 15 lbs
  • 1-Year limited warranty

Note: Do not use the backing plate to mount the fender to your trailer.

Tips for Replacing and Installing Trailer Fenders

  • Do your best to match the dimensions of the new fender to your old one.
    • If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
  • As with all trailer maintenance, don't forget to chock your wheels before getting started.
  • For a bolt-on fender, use your existing mounting hardware, if possible.
    • The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
  • If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
  • Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
  • Before you start drilling, position the fender where you need it and center it over your wheel well.
    • Mark where you need to drill (measure twice, drill once).
  • Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.

MFS00018 Single Axle Rounded Trailer Fender with Backing Plate - Cold Rolled Steel - 14" to 15" Wheels - Quantity 1

Replaces etrailer MFS00225 and F9X32-1RWB

Customer Satisfaction Score:

Customer Reviews

Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 - HP36VR

Average Customer Rating:  4.8 out of 5 stars   (2301 Customer Reviews)

9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. 16-Gauge, cold-rolled steel is built to last. Bolt or weld onto your trailer.


Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.


As expected. Worked great for my projec t.

Guzzi O.


The fenders are working great! No complaints.


The fender was good quality & it seemed priced right.
The standard shipping was pretty quick. Only 3 days from ordering. And pretty much across the nation.
The packaging was a little lacking. Put in a box with no packing. Slight dented. But not enough to call them. Although one of the fenders I ordered a few years ago had to be sent back.
All in all … a great company to deal with!
Customer support is wonderful!


The fenders were a perfect fit and much more heavy duty then the originals. I am very pleased. Thank you etrailer.


I have not mounted these fenders yet, but they arrived on time and in good condition. They are certainly heavy duty and I am sure they will work well for this restoration project.

As always, the service from was excellent.


I don't usually write reviews, but my experience working with has been exceptional! I like dealing with a company that has a real human being answer their phone and etrailer does that. I had ordered the wrong parts for a trailer and dreaded the return activities. Sharon O was very helpful and got the replacement parts sent out the same day we talked. She also sent me a pdf that I was able to print and use as a UPS label to return the wrong parts I had ordered. All I had to do was take the package to a UPS office. ( even paid for the shipping charge and deducted the amount from the refund for the parts I returned.)


I purchased a boat trailer with no fenders (the originals rusted out and were removed) and these turned out to be perfect. Very sturdy and well built.


Perfect fit. I lent my trailer out. Well, you know what happened. Fender got ripped off.


never heard of etrailer before. was a simple google search of the fender size I needed. very reasonable price. I ended up paying for shipping but it was still cheaper than ordering a fender from a local TSC. Easy check out and fast delivery of product. would use again!


Very high quality. Rebuilt a trailer that had been sitting on the ranch full of junk for 15 years. Had a mobile home axle and wheels on it. eTrailer had the perfect size fender. ready to prep needed.

Langford J.


Great! No Complaints after a year on the ranch.


You can weld or bolt on these fenders. I’ve opted to have them weld by my local muffler shop, I used two jack stands on each end to place and level. I like them and I would recommend to others.


Package arrived promptly and without damage. Ordered the fenders with the backing already on.
Attachment was simple and easy with the MIG. Note that the backing that is on the fender is spot welded. It required further tack welds between each spot weld to keep it from vibrating. Overall, a good sturdy fender that should last.


They are good to go.


Great product at a great price...
definitely use etrailer aagain



Still going strong!!! I dont really beat on my stuff. I was given a trailer that had seen better days, I rebuilt most of the mechanicals on it & its still serving me well…Thanks for the follow up though…


These fenders are solid and well built.
4 stars instead of five because I ordered a receiver hitch and it was packaged with the fenders and caused some minor cosmetic damage.
I also added some welds to the back plate as it was minimally spot welded in only a couple spots.


Even better quality than I expected, very well built


We search for a replaceable fender for our trailer. We were surprised what a wide stock of trailer parts offered by e trailer. They were able to provide an excellent match for my trailer fender. Brittany was extremely customer focused and made it easy to get the fender to me. This was one of the easiest buying experiences working with Brittany. We would not hesitate to buy from e etrailer again. The fender arrived yesterday in perfect condition and is an exact match to what we needed. Thanks Brittany!!


High quality, fairly priced, totally sa tisfied!


First quality easy to install i weld,no surprises


Perfect fit. Will be reinforcing the welds on the back plate but not a big deal.


Wanted to paint and install prior to sending feedback. Quite satisfied. Well made fenders. Easy install. Look great. Sturdy.

Michael K.


As well as when I purchased the fenders and installed them. Ive towed this trailer 6,000 miles since install. Working quite well.


I thought the fenders were excellent! And I believe I paid a great price. I replaced the fenders on a 12 foot utility trailer that has 15" tires. I thought they fit well, and I bolted them on (even though I understand your not supposed to.) I used a solvent to remove the oil from the fenders, primed them, and painted them. I was grateful that they were not rusty when I received them. Good job everyone. No dents in packaging and delivery either. Again, good job.


I’m so proud of my self on making the right choice and purchase from ETRAILER, large inventory, fast delivery, quality products and best of all competitive affordable prices
I ordered wheel fenders and they fit perfectly just a couple of coats of paint and done.
Most recommend for all your hauling needs


This is not my first time ordering from here and I don’t expect it to be my last, very good quality and fast shipping. Thank you


Could have had a few welding plates spot welded on. Had to be very careful not to burn thru when welding to trailer. Worked great.

Show More Reviews

See what our Experts say about this etrailer Trailer Fenders

  • Why Isnt the etrailer Trailer Fender # HP36VR Galvanized
    This Etrailer Trailer Fender # HP36VR is not galvanized. The reason for that is that these fenders are a weld-on application and it is not recommended you weld galvanized steel for health reasons. Painting the fender after it is installed would be your best option.
    view full answer...
  • What Are the Dimensions of the Single Axle Trailer Fender
    The measurements we've provided for the Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 # HP36VR were taken from outside edge to outside edge of the bottoms of the fender (32"), from the top of the arch to the floor when sitting flat (15") and the backing plate itself (12"). I've also linked a photo of these dimensions and the review video where Jeff shows these measurements in real time.
    view full answer...
    Image 1 for
  • How Tall is the Backing Plate of the Single Axle Trailer Fender HP36VR
    The backing plate of the # HP36VR measures 12". I was able to pull this part from our warehouse and measure it to confirm.
    view full answer...
    Image 1 for
  • Replacement Steel Fender for 1994 Procraft Single Axle Boat Trailer
    Your trailer appears to have steel fenders and we do offer these as well as tough ABS plastic types and aluminum fenders too. You can see all replacement trailer fenders on the linked page. Just click on your trailer's wheel diameter and your preferred material to narrow down the products displayed. We do not carry exact trailer-specific replacement fenders but between all the types and sizes we carry you should be able to find a suitable part. For example, for a steel fender with backing...
    view full answer...
    Image 1 for
  • Removing Rust from Metal Trailer Fenders For Paint Prep
    The trailer fender part # HP36VR that you referenced is raw steel so it's going to rust if it's exposed to moisture. When you go to paint yours I would take some steel wool to the rusty areas to get it all off and then prime and paint it whatever color you like and you'll be good! You might even see if you can find a spray paint that has a primer in it already to eliminate that step. Most paints are good to use on metal surfaces too so it shouldn't be super hard to find what you would need.
    view full answer...
  • Recommended Replacement Trailer Fender for a 2003 Haulmark Trailer
    You can certainly email me your photos of your Haulmark trailer's fender to help me determine which replacement would be the best fit. But you will also need to confirm the dimensions of the fender since Haulmark has made many different trailer models over the years and even just within their 2003 model year. Fender specs are not included on their website. In the meantime you can review the linked page to see all of our replacement trailer fenders. You can click on the wheel size first,...
    view full answer...
  • Availability of Fenders for Use as Replacements on 1988 Jeep Comanche Pickup with Dump Body
    We carry general-purpose replacement trailer fenders including plastic, aluminum and steel products, all of which are shown on the linked page. You can click on the filters on the page to select your required length dimension (32-inches long overall), your wheel (not tire) diameter, and the preferred material. For example, in a 32-inch length steel fender with a backing plate and radius lip that will work with a 15-inch wheel you could use Redline # HP36VR. This fender measures 32 L x...
    view full answer...
  • Replacement Fenders for 2001 Single-Axle Vent Trailer with 15-Inch Wheels
    We can offer you a choice of steel, aluminum or even bracket-mount plastic replacement fenders that will work on your single-axle trailer with 15-inch wheels. You also have a choice of fenders that include steps if you like. The linked page will show you all trailer fenders that will work with 15-inch wheels and the filters on the page will let you sort the results based on your preferred material, features and installation method. If you prefer a weld-on steel fender without a step we...
    view full answer...
  • Availability of Back Plate for etrailer Single Axle Trailer Fender # HP66VR
    The etrailer brand Single Axle Trailer Fender # HP66VR referenced in your question is designed for a direct weld-on installation without using any other components. Because of this, there are no available backing plates or other type of installation hardware available for these fenders. The fender has a 1 inch radius lip on the front and a 90-degree-angled back for flush mounting. We also offer the etrailer Single Axle Trailer Fender # HP36VR with a backing plate. This is a weld-on application...
    view full answer...
  • Availability of Large Diameter Trailer Rim Fender
    The fenders we offer for the 16 inch diameter wheels like the part # HP46VR are not offered with backing plates, BUT the fender for 14-15 inch wheels part # HP36VR does have a backing plate. This fender is only 4 inches shorter and 1-3/4 inches narrower.
    view full answer...
  • Aluminum Fender Recommendation For Trailer
    We do offer an aluminum trailer fender but it does not feature the backing used for mounting like part # HP36VR. The aluminum fender we carry is part # HP96VR. The installation of this fender is done by drilling and using mounting screws in the lip of the fender. I have attached a link to a video that shows how these fenders are installer.
    view full answer...
  • Is the Steel 14-15 Single Axle Trailer Fender Offered with a Backing
    The Single Axle Trailer Fender part # HP29VR is offered with a backing using part # HP36VR.
    view full answer...
  • Can etrailer Aluminum Tread Plate Trailer Fender Fit Boat Trailer
    The etrailer brand Aluminum Tread Plate Trailer Fender, part # HP96VR measures 10 inches wide by 33 inches long by 17 inches tall and is designed for 13 to 15 inch wheels. This is a weld-on or bolt-on application. To install on your boat trailer you will need to consider how it is to be attached, and how much of a mounting surface you have. I have attached a link to an installation video for this fender you can check out. I recommend using a professional welder if that is the route you...
    view full answer...
  • Recommended Fender and Fender Marker Light for a 2016 1/2 RPOD 180
    We can most likely help with the needed lights as what we carry is from the same suppliers that the OEM's use. If you can provide a part number that would be helpful, or forward an image of the light showing any visible markings. Same with the fender, while we will not carry RV specific body parts, we do have a selection of fenders available such as the Single Axle Trailer Fender w/ Backing Plate, # HP36VR. If you can provide measurements we can suggest a replacement.
    view full answer...
  • How to Determine Fender For Cargo Trailer
    Possibly, but we don't have any way of knowing what fenders are on your cargo trailer or a way to look up a VIN. To find the right fender you need to know your wheel size and also measure your current fenders to get the closest possible replacement. For example if you have 14" or 15" wheels and a fender that measures close to 32" long x 9" wide x 15" tall you'd use the Trailer Fender # HP36VR. I have added a link below to our entire selection of fenders.
    view full answer...
  • Replacement Single Axle Fender for my 15" Trailer Tire
    I have linked the options I have in the 32" size range. I do not have anything that is in the 33.5" range. The most common are the 32" and 36". Of the options available the Single Axle Trailer Fender with Backing part # HP36VR seems to be the closest match.
    view full answer...
  • Dimensions of Fender for 14 inch Trailer Wheel
    Some tow dolly fenders are plastic and some might be metal. It really depends as there isn't an industry standard for that. For example we have the Fulton plastic fender for 14 inch wheels part # F008554 which is 9.7" wide x 31.3" long x 12.75" tall.
    view full answer...
  • Availability of Trailer Fender Similar to part # CE17920 with Welded on Back Plate
    The closest fender we offer to the part # CE17920 that has a welded back plate on it is the part # HP36VR which is a few inches longer. It's dimensions are 9" Wide x 32" long x 15" tall.
    view full answer...
  • Can Marine Carpet Be Added To Backing Plate On Single Axle Trailer Fender HP36VR?
    It sure can! The backing plate on the Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 # HP36VR you were looking at measure 12" tall as shown in the included diagram so you will just need to select marine grade carpet that is 12" or close in width. I recommend the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide # CE11349 which is 18" wide so you will have plenty of material to work with. I included videos of the products...
    view full answer...
    Image 1 for
  • Availability of Replacement Trailer Fender with Attached Lighting
    We do offer a wide range of replacement trailer fenders in plastic, steel and aluminum for many different wheel sizes ranging from 8- to 16-1/2-inches. The linked page will let you choose your wheel size, fender material and fender style, such as one with an included step. Simply click on the filters to narrow the results based on your needs. The fenders we sell are general-purpose replacements intended to work in a variety of applications and so we may not offer an exact match to your...
    view full answer...
  • Availability of Backing Plates for Mounting etrailer Trailer Fender # HP66VR
    The USA-made etrailer brand Trailer Fender # HP66VR is intended for direct weld-on installation without use of any other components. The outside edge of the 16-gauge steel fender has a 1-inch-radius lip and the inside edge (that part that welds on to your trailer) has a straight 90-degree angle. Because these fenders are intended for weld-on installation there are no backing plates or any other type of installation hardware. These fenders are suitable for use with 16 - 16.5-inch diameter...
    view full answer...
  • Installation of Steel Fender on 15 Inch Wheel
    The Single Axle Trailer Fender - 90-Degree Back - Steel - 15" to 16" Wheels - Qty 1 # HP46VR will use Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2 # CE26098G-2 instead of a backing plate. If you want the backing plate you would instead use the Single Axle Trailer Fender with Backing - Cold Rolled Steel - 14" to 15" Wheels - Qty 1 # HP36VR if you have 15 inch wheels.
    view full answer...
  • Recommended Brackets for etrailer Single Axle Trailer Fenders to Use With 15 Inch Wheels
    For the etrailer Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels, # HP46VR, I called the manufacturer because we don't carry a bracket for that width of fender. The manufacturer says that for that wide a fender, they don't have a bracket and that you'd have to have it custom fabricated. The closest thing we have would be the Smith Galvanized Steel Mounting Brackets for Trailer Fender- 13, 14, and 15 Inch Wheels, # CE26098G-2. This may give you some ideas on what you would...
    view full answer...
  • Replacement Fender for 1988 Featherlite Trailer
    We do offer a range of replacement trailer fenders, in steel, aluminum and plastic, and the link on the right will take you to our main page where you can see all types available. We offer fenders with or without steps and in a variety of colors and types that either weld on, bolt on or mount with a bracket. You can select your wheel size by clicking on the appropriate link at the top of the page and you can then use the filters in the left margin to find a fender that is suitable for...
    view full answer...

< Previous

Do you have a question about this Trailer Fender?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jacob H
Installed by:
Jacob H
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Alexander C
Written by:
Alexander C
Employee Thomas T
Video by:
Thomas T
Employee Carrie F
Updated by:
Carrie F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.