Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 10,000 lbs.
Features:
Specs:
Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
Average Customer Rating: 4.9 out of 5 stars (585 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 10,000 lbs.My wife purchased the 2.5 inch B&W hitch for a gift but I needed the 2 inch. Julie was very helpful with the return process and ordering the correct 2 inch Tow and Stow hitch. I received the new hitch in 2 days and love it. The fit is perfect and looks great on me 2020 GMC AT4.
Etrailer.com is top shelf. They are the only store I use for my trailer needs.
I bought this for our GMC AT4. So happy that I did. No more worrying about dropping the tailgate down and hitting the hitch. And no more walking behind the truck and hitting your shin!
I absolutely love this hitch. It looks great and it allows me to use my truck to its fullest. I couldnt be happier.
It’s a great solid product. But the pins rust real quick and they become hard to removed to stow it out of the way.
Katrina D.
4/24/2024
I deeply apologize for the delay in my response. I have gotten in contact with the manufacturer and they have responded that the pin that you can get to replace is part #BW23FR. They are 5/8” pins. These pins are stainless steel and should not be rusting. I would advise that you clean inside the Tow & Stow holes and make sure you are greasing the pins with white lithium grease.
Excellent purchase and experience. Fast delivery.
This is third one i have bought my last one got stolen and yea i had a lock on it.
I didn’t receive a receiver lock not sure if it was included with product.
This is a well built hitch. It works like it's supposed to with my multipro tailgate, and it looks really neat on my 2024 GMC 1500 Sierra SLT.
Great, quick process for payment and fast delivery.
This is my second hitch on a different truck. Absolutely love the versatility and durability of the hitch itself.
Great fit right out of the box. I was surprised there was not a pin to attach it to the truck. Other than that, it was an easy install. Works great.
just what i was looking for!
Great product and works great with multipro tailgate
Great hitch, it's heavy and well made. Keep the pins greased to make it easier to adjust height. I typically remove and keep under the rear seat when I am not using it. My fear is my boys will play with it and open the multi pro gate into the hitch. Really like having the option to use all 3 ball sizes, no more searching for the 1 7/8".
Awesome heavy duty trailer hitch should never have to buy another hitch for the rest of my life.. also purchased the the locks to secure the hitch from Any theft. An added protection of insurance..
I’m sure it has saved my tailgate several times. I did flip the ball slide upside down so that I don’t have to fold it under for the tailgate not to hit. Only negative is the price and after a year it is starting to raddle.
man it is heavy i could hardly pick it up as it should be. its nice to be able to leave it on my truck and never take it off and not hit my shin on it when i walk by just need to get a lock pin for it because someone would steal it for sure. Great pease of workmen ship
Exactly what I wanted and received it a lot sooner then I expected
Very well built with tight tolerances which should reduce or stop rattles noise.
Love this hitch. Made two adjustments: the college emblem and using one pin for both bolts. Only thing that would make this better is a slightly longer pin so that it could go fully through the lower bolt.
This hitch is very practical, especially for GM vehicles that are equipped with the tail gates that has the step up. Also, it has a clean look and gets lots of compliments.
Works great got here quick.
Delivered early. Package was as promised. Communication from paul b was great.
This is exactly what I needed for my truck. It works with the tailgate, and stows away when not in use.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim
7/25/2022
The 3 ball Tow and Stow is an excellent hitch.