Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty, sturdy steel ball mount measures 9-5/8" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be reviewing part number BWBMHD30012. This is the B&W Heavy-Duty Ball Mount with a 3 inch rise or a 4 inch drop, it's rated at 16,000 pounds. It's ball mount is going to let you hook up your trailer to your tow vehicle. The shank will slide into your vehicle's hitch receiver and the ball platform is going to provide a good mounting point for your hitch ball which is sold separately. This is made from a sturdy steel construction. You can see here at the rear that we have a solid shank, there's hollow shank or cut out back here. This is a solid sturdy steel piece. It is corrosion resistant and it's coated in a high gloss black powder coated finish. Now both the drop and the rise position are available to ensure level towing and a hitch pin and clip or a hitch lock is require and sold separately.
You can refer to the Ball Mount's product page and look underneath the related products on the right hand side of your screen to view this . to view this item. This ball mount is made in the USA and is designed to fit a 2 inch by 2 inch trailer hitch receiver. It has a gross towing weight of 16,000 pounds with a max towing weight of 16,000. Now I'm going to measure from the center of our hitch pin hole to the center of the ball hole and we're going to get a measurement of 9 and 5/8 of an inch. Now this ball mount provides a rise of 3 inches and a drop of 4 inches. We'll go ahead and show that.
The drop is measured from the inside top edge of the receiver tube, it's also equivalent to the hut of the shank to the top of the ball platform. I'll place the ruler on here and if you can picture an imaginary line coming off the top of the shank, it's going to hit at about the 4 inch mark, giving us the 4 inch drop. Now we rotate this to the rise position and we'll take that same measurement from the shank to the top of the ball platform and we're going to get a rise of about 3 inches. Our shank from the end to the top edge has a measurement of 6 inches. This ball mount does have an inch and a quarter ball hole diameter. In selecting your ball accessories you want to make sure that it doesn't exceed that measurement and again, this has a gross towing weight of 16,000 pounds.
I'll go ahead and slide it into the receiver hitch just to show you how to install. All you need to do is slide the shank of your ball mount into the opening of the hitch, line up your pin holes and then insert your pin and clip. Just like that, you're all loaded up and you're set to go. Now to flip it over to the rise position, you'd remove the pin and clip, flip it over and reinsert it and install it just the way I showed you in the drop position. That will compete today's review of part number BWBMHD30012. The B&W Heavy-Duty Ball Mount with a 3 inch rise or a 4 inch drop. .
Average Customer Rating: 4.9 out of 5 stars (131 Customer Reviews)
Heavy-duty, sturdy steel ball mount measures 9-5/8" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.Nice heavy duty ball mount. Would highly recommend for heavy duty use.
We have always been very satisfied with the quality of the products and prompt delivery with eTrailer.
Fast shipping. The heavy duty ball mount and ball is excellent quality and exactly as described, heavy duty! Thanks e-trailer!
Great service!
Extremely heavy duty hitch!!! Very plea sed
Great
Great products at fair prices. Fast shipping too! Thanks again!!
Delivered promptly and quality was what I expected.
Well built and heavy hitch.
Was needing a 7-8 inch ride for my camper that could sustain a GVW of at least 5000 lbs. Let me say, it’s a hard to find item. Thankfully I called Etraer and with some research, found me the perfect ball mount. It’s heavy duty for a reasonable price.
Solid!!! Excellent receiver for my HD 2&5/16 ball. Excited to use it on my old 3/4 ton truck moving my heavy trailers around.
This is nice. I have been looking for a high quality made in USA product and I found it.
The hitch ball mount is very well built, and it's a solid build, not hollowed out like most. This item is a buy if you prefer a quality product.
Thanks etrailer,
Thanks for the help and support.
This 16,000 lb hitch and 30,000 lb ball keep me legal in the weigh stations. Pulling 800 mile runs through the mountains safe and sound.
Welds seem fine. Build seems to match s pecs.
I had to flip this upside down and put a hitch ball on this to get it to work with my Dodge Journey and my camper. It's held up without issue for a half-dozen camper pulls. I wish the paint hadn't already started flaking off at the receiver end, but that's to be expected when you connect metal to metal. The other parts of this haven't started flaking yet after a year so hopefully it continues to hold up.
It works fine.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim S.
8/18/2021
We remain very satisfied with all of your products.