bing tracking image
  1. Trailer Hitch Ball Mount
  2. B and W
  3. Adjustable Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 5 Inch
  6. Rise - 5 Inch
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

Our Price: $269.00
Trailer Hitch Ball Mount
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball. Great Prices for the best trailer hitch ball mount from B and W. B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black part number BWTS10038B can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3966)
  • Q & A (0)
  • Photos

B and W Trailer Hitch Ball Mount

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 5 Inch
  • Rise - 5 Inch
  • 1-7/8 Inch Ball
  • 2 Inch Ball
  • Two Balls
  • 7500 lbs GTW
  • Class IV
  • B and W
  • Steel Shank - Matte Black
  • Steel Ball

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.


Features:

  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 1-7/8" ball: 3,500 lbs
    • When used with 2" ball: 7,500 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 5"
  • Maximum rise: 5-1/2"
  • Incremental height adjustment: 1"
  • Limited lifetime warranty


An illustration shows the eleven inch clearance level needed between the ground and B and W Tow and Stow hitch.

Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.


The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.


Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.


Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.


When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.


Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.


Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.


When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.


How to Measure Drop on Adjustable Ball Mount


TS10038B B and W Stow and Tow Dual Ball Mount - Model 8 - 1-7/8" Ball and 2" Ball - Black

Item # BWTS10038B




California residents: click here


Customer Satisfaction Score:


Customer Reviews

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black - BWTS10038B

Average Customer Rating:  4.9 out of 5 stars   (3966 Customer Reviews)

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.

by:

Very nice and sturdy made Hitch. I love the streamlined design. Fast shipping



by:

Great tow hitch. Love the way it stores away in hitch and do not have to remove it.

Be careful when moving from storing to pull position, it can easily pinch your fingers



by:

Couldn't be happier with my new hitch. Excellent quality, exactly as advertised. The video explaining the characteristics and operation of the hitch was extremely helpful and answered all my concerns. I now only need one hitch for all 5 of my trailers. This was my 2nd purchase from etrailer and I highly recommend them.


Brad R.

1/20/2018

After 1 year I couldn’t be happier with my ball hitch. I recommend this hitch to anyone that pulls multiple trailers.



by:

This product is the best hitch I ever owned. It has never let me down. So versatile and easy to use. Also, I like to add the customer service from etrailer is great, friendly, knowledgeable and very helpful. I highly recommend etailer to any folks out there that are looking for the best product and company to buy from hands down.



by:

Good price, quick shipping, fits great!



by:

excellent product ball is showing signs of surface rust after going threw one winter not to bad. love the adjustibility of it. On my 07 silverado with factory receiver it is possible to still remove the ball on the back slot



by:

The stow & go hitch is very well made with good material. It is the first B&W hitch I have ever used and I just love it. It is easy to adjust and solid when hooked up.



by:

B&W makes a top of the line product, this is the third B&W I have owned. I wouldn’t settle for anything less. Well worth the money. Very versatile, does everything I need it to. I have two boats, the transition is effortless depending on what we are doing at the lake I hope it will be the last one I own. Thanks



by:

Works great! The best hitch I've ever o wned.



by:

Best hitch ,fast shipping and excellent service



by:

Love B&W hitches



by:

These items were purchased to upgrade our boat trailer and tow vehicles at work. Everything was perfect and functions as planned. Very pleased.



by:

Well built. Can be flipped so you don't bust your shin. Will last longer than the truck. Made in America.



by:

Easy install, works as advertised, stows quickly and easily.

Charles C.

8/26/2022

No issues, best hitch I have ever owned, quality product.



by:

Bought this for my husband. He LOVES it! Constructed well, easy to operate. Great product

Michele

4/16/2019

We love the hitch!



by:

Awesome hitch.

Greg

4/10/2022

Works flawlessly. Easy to adjust and tuck out of the way without removing from the truck.



by:

Heavy duty & secure.



by:

Solid, high quality product and easy to use.



by:

Easy ordering . Fast free delivery!



by:

Really good quality and design. Works as advertised and looks great on the truck.



by:

Love the adjustability, very nice produ ct.



by:

Simple. Super rugged. I really like the fold and stow component. I thought it kind of gimmicky when looking at it on line. Now that I see it on the truck, what a bonus.



by:

Awesome



by:

Awesome hitch!!



by:

Product is as ordered.


25
3538
Show More Reviews

See what our Experts say about this B and W Trailer Hitch Ball Mount

  • Recommended Rear Suspension Enhancement For A 2022 Jeep Gladiator To Prevent Sagging While Towing
    Choosing the correct rear suspension enhancement for your 2022 Jeep Gladiator will depend on how much sag you are actually getting and if you want to have something that is adjustable or not. The SumoSprings Solo Custom Helper Springs # SS62XR will be the more heavy duty option as it can offer up to 1,800 pounds of support (at 50% compression), but once it's on, it's on. There is no way to adjust it to a lower setting when you are not towing, so it will affect the ride. This isn't going...
    view full answer...
  • Ball Mount Recommendation for 2006 Ford F-150 to Cover Basically All Trailers
    The B and W Tow N Stow Ball Mount part # BWTS10038B that you referenced would be what I would recommend. This comes with the two more popular ball sizes of 2 inch and 1-7/8 inch which are more common on lighter duty trailers and has ability to do up to a 5 inch drop. If you wanted maximum flexibility though we have a three ball version of this with the part # BWTS10048B which also includes the 2-5/16 inch ball size. This would cover everything and would be a really solid option too.
    view full answer...
  • Recommended Ball Mount to Tow a 2022 Volkswagen Atlas
    It's possible, Rafael, but it looks like the GVWR of your Atlas ranges just a bit over 6,000 lbs which I personally wouldn't be comfortable with. So with that said, I'd recommend using a bit beefier ball mount like the B&W Tow & Stow 2-Ball Mount # BWTS10038B which has a 7.5K capacity and has 5" of drop or 5 1/2" rise depending on what you need.
    view full answer...
  • Parts Needed to Tow a Trailer with a 2007 Honda Pilot
    On your 2007 Honda Pilot the parts you mentioned can all be used for towing a trailer. The Curt Class III Trailer Hitch Receiver # 13328 is confirmed to fit and will work great for you. The wiring harness # C55336 is the correct part for your Pilot. However, it isn't designed to be mounted under the bumper of the vehicle. It's generally stored inside the rear compartment and then ran out of the closed rear hatch when in use. The thick rubber seal along the hatch doesn't damage the...
    view full answer...
  • Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2016 Toyota Tacoma
    The best trailer hitch that fits your 2016 Toyota Tacoma is the Curt # C13264. It's a Class III, 2 inch hitch that bolts right onto the truck's frame. All of the necessary hardware is included. If you're going to be towing with your truck you'll need wiring as well. The Curt T-Connector # C56349 wiring harness provides you with a 4-way trailer connector. It plugs into the truck's wiring behind both rear tail lights and then has a single wire ran to the battery. You can mount the connector...
    view full answer...
  • Height Adjustable 2 Ball Hitch With 1-7/8 and 2 Balls Available in Black
    We have the B&W Tow & Stow 2-Ball Mount # BWTS10038B. This adjustable ball mount can have a drop as much as 5" or a rise to 5-1/2". It has a 1-7/8" ball with a 3,500lb capacity and a 2" ball with a 7,500lb capacity. It is also has a matte black finish like what you are looking for. I do recommend using the InfiniteRule Locking Pins # 34061775-D to secure the entire assembly to your vehicle. These 4 locking pins are keyed alike and designed specifically to be used with the B&W Tow & Stow...
    view full answer...
  • Ball Mount Recommendation for Use with etrailer hitch e78KR for 2007 Honda Element
    The key when picking out a ball mount is to go with one that allows the trailer to be towed level. Without knowing the height of the coupler on your trailers I can't know what would work best, but I do have a solution that will work. The part # BWTS10038B is an adjustable ball mount that has two ball sizes. 2 inch hitch ball and a 1-7/8 inch hitch ball which would be what you'd most likely find on a smaller trailer. If you already have the Curt Ball mount, you will need to determine the...
    view full answer...
  • Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer
    There are three trailer wiring harnesses that fit the 2011 Jeep Liberty. The Tekonsha # 118554, Curt # C56334, and a Hopkins # HM11142485. All three provide a 4-way connector and install by plugging in behind both tail lights. There is also a hot lead wire that will be run to the battery and a fuse to be installed. Everything for the install is included with each harness. Then the connector will is stowed beneath the Jeep near the trailer hitch. Of the three I recommend the Tekonsha...
    view full answer...
  • How Will I Know What Size Ball Mount Receiver I Need Without Having A Trailer Yet?
    Looking at the different trailer hitch receivers that we offer I see that most will have a hitch height of 12-16" on the 2008 Honda Odyssey. We do list the heights of the receivers in our installation videos. If you do not yet have a receiver I recommend our etrailer Trailer Hitch Receiver # e98862. This receiver will have a height of 14" and a 2" receiver. The 2" receiver is great because it will give you more ball mount options as well as hitch accessories. Most 5'x8' trailers will...
    view full answer...
  • Parts Needed to Install a 7-way Trailer Connector and Tow a Trailer with a 2009 Toyota Tacoma
    Yes, you can install a 7-way trailer connector on your 2009 Toyota Tacoma. There's a couple of options depending on your trailer. First you're going to need to start with a 4-way flat connector like you've already found. I suggest the Curt # C55513 which plugs into your truck's wiring either behind the taillights or the rear bumper. Once you have the 4-way, if your trailer does not have brakes you can use an adapter, # 37185, to go from the 4-way to provide a 7-way. However, installing...
    view full answer...
  • Recommended Ball Mounts Compatible with 2" EcoHitch Hidden Receiver # 306-X7194 On a 2015 Prius c
    The EcoHitch Hidden Trailer Hitch Receiver # 306-X7194 for your 2015 Toyota Prius c has a 2" receiver that we measured to have a hitch height of 11-1/2". With this you can use either a fixed ball mount like the Curt # C45100 that has a 6" rise which would fit on a trailer with a hitch height near 15-1/2". You will need either a 1-7/8" # C40002 or 2" # 40038 ball. If you intend to pull different trailers that can have different hitch heights an Adjustable Ball Mount # BWTS10038B will allow...
    view full answer...
  • Trailer Hitch Recommendation for 2014 Mercedes GL 450
    The Curt Trailer Hitch Receiver # C13190 is a confirmed fit for your 2014 Mercedes-Benz GL 450 as long as you don't have the Active Curve System on your 4matic. It is a bolt on installation with complete hardware kit and instructions included. The Active Curve System is a sophisticated leveraging action of the car's suspension that reduces leans in turns by allowing all four wheels to work independently ensuring they are on the ground at the same time. They system uses electrohydraulic...
    view full answer...
  • Which Draw-Tite Trailer Hitch Receiver Fits a 2013 Ford Edge SEL with Dual Exhaust
    The Draw-Tite Trailer Hitch Receiver # 75728 is for the Ford Edge Sport and will not fit your 2013 Ford Edge SEL. On you SEL model instead you need Draw-Tite # 75992. It is designed to fit models with dual exhaust. I've attached a picture of the hitch on an SEL with dual exhaust that I found in the install details. I've also linked the install details and an install video for you. If you're going to be towing with your Edge the wiring harness to fit is # 118515. It plugs into the...
    view full answer...
    Image 1 for
  • B&W Tow & Stow 2-Ball Mount Compatible With Multi Pro Tailgate on a 2023 GMC Sierra 1500
    You need the B&W Tow & Stow 2-Ball Mount # BW29FR since you have the Multi Pro tailgate on your 2023 GMC Sierra 1500. This will clear the tailgate when the hitch ball is flipped into the stow position unlike the Mount # BWTS10038B you found. We do have the 2" Hitch Cap Sensor # C57VV you can add to your sierra if you use a standard ball mount or the system you found. This will prevent that portion of the tailgate from opening when a ball mount is inserted into the receiver.
    view full answer...
  • Trailer Wiring Harness for 2017 Hyundai Santa Fe Limited without the Factory Tow Package
    The wiring harness confirmed to fit your 2017 Hyundai Santa Fe Limited is # C56184. I've linked a video of the install on a 2014 Tucson which is a similar process to your Santa Fe. The Curt # C13153 is the trailer hitch I suggest for you. This install video is also linked. You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once...
    view full answer...
  • Installing a 7-Way Trailer Connector and Other Parts to Tow a Trailer with a 2017 Kia Sorento
    To install a 7-way trailer connector on the back of your 2017 Kia Sorento you'll first need a 4-way connector. Use # 118583 which installs by plugging in behind the Kia's tail lights. If your trailer does not have brakes you can use the 4-way with # 37185 and just cap off the wires you don't need. If your trailer has brakes once you have the 4-way installed use our # ETBC7 kit to install the 7-way. This will also include everything you need for the electric brake controller. For the...
    view full answer...
  • Ground Clearance Requirements for my 2021 GMC Yukon
    There is not a rule on how much clearance you need. It really comes down to the terrain you are driving over. For general use however having 10-11 inches of clearance will be sufficient when using the B&W Tow & Stow 2-Ball Mount part # BWTS10038B. There are several vehicles on the market where their hitches sit within 7 or 8 inches of the ground with out issues.
    view full answer...
  • Parts Needed to Tow a Trailer with Brakes Using a 2016 Hyundai Santa Fe
    The Curt trailer hitch receivers for the 2016 Hyundai Santa Fe are # C13152 if you have a Sport model or # C13153 if you have an SE or Limited. I've attached videos of both being installed. In order to connect to the Flagstaff's 7-way and power the brakes you'll first need a 4-way wiring harness on the Hyundai. The Curt # C56184 will work regardless of which model your Santa Fe is. This install video is also attached. Then you'll use our # ETBC7 kit to convert the 4-way to a 7-way....
    view full answer...
  • Trailer Hitch Receiver Confirmed to Fit a 2017 Ford Explorer
    We do have trailer hitch receivers to fit your 2017 Ford Explorer but the Draw-Tite # 75278 will not fit. It's for several different models of GM vans. Instead you'll want to use Draw-Tite # 76034 on your Explorer. I've linked an install video for you. If you're going to be towing a trailer you'll also need a wiring harness. I recommend the Tekonsha 4-way # 118540. You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch...
    view full answer...
  • Will Spare Fit With Trailer Hitch Receiver Installed on a 2017 Hyundai Santa Fe Sport 2.0t Ultimate
    Both the Draw-Tite # 75772 and Curt # C13152 trailer hitch receivers for your 2017 Hyundai Santa Fe Sport require the spare tire to be temporarily removed for installation. Once installed the hitches fit with the spare tire. If you look at the videos I've attached the spare tire is put back in place and that is the 2017 Sport 2.0t Ultimate like yours. Between the two hitches I recommend the Curt because of the higher weight capacity. If you're going to be towing with your Hyundai you...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring Harness for Towing with 2017 Jeep Cherokee Trailhawk
    For your 2017 Jeep Cherokee Trailhawk I recommend the Curt # C13172. This is a Class III, 2 inch hitch that's custom designed for your Jeep. A 2 inch receiver has a higher towing capacity than a small hitch and will fit a lot more accessories like bike racks and cargo carriers if you ever choose to use them. The wiring harness # 118605 will provide a 4-way trailer connector. It plugs in behind both tail lights then has one hot wire that connects to the Jeep's battery. to secure the...
    view full answer...
  • Recommended 2 Inch Class III Trailer Hitch Receiver For 2017 Chevy Equinox With Factory Tow Package
    For your 2017 Chevy Equinox V6 with factory tow package, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" # e98865. This hitch will bolt directly to your frame and bumper support brace. I've attached a video to help. The factory hitch will simply be changed out. Since we are changing the hitch receiver opening, I recommend getting a ball mount to match. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black # BWTS10038B...
    view full answer...
  • Parts Needed to Tow a Trailer with a 2008 Honda Odyssey
    We don't have complete towing packages for vehicles but I can recommend the parts you'll need to tow a trailer with your 2008 Honda Odyssey. I recommend the Draw-Tite Trailer Hitch Receiver # 75270. It's a 2 inch, Class III hitch that's custom designed for your van. I suggest the Class III hitch because it will have higher ratings and be more compatible with accessories. Then the wiring harness # 118438 will provide you with a 4-way trailer connector. It plugs into a connector located...
    view full answer...
  • Parts Needed to Install a 7-Way Trailer Connector and Tow a Trailer with a 2004 Jeep Liberty
    To install the 7-way trailer connector on your 2004 Jeep Liberty you'll first need a 4-way connector. Use # 118524. It easily installs by plugging in behind both tail lights and includes a powered ModuLite to reduce the strain on your Jeep's wiring. Once you have a 4-way you can install a 7-way. If the trailer doesn't have brakes you can use an adapter like # 37185 and just cap off the unused wires. If you want to power the trailer's brakes then you'll need to install a fully functioning...
    view full answer...


< Previous
123. . .5




Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.