Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 21,000 lbs with the 2-5/16" ball.
Features:
Specs:
Note:
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (2507 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 21,000 lbs with the 2-5/16" ball.Fast shipping and well packaged.B&W hitches are top notch. I would definitely recommend to a friend.
I have a F250, and the 4 1/2 inch drop works fine.
Versitile great secure hitch.
Excellent hitch! Highly recommend this ! Excellent service!
Great hitch! Folds up and stows below the receiver. Nice setup!
Nice hitch, a little sloppy tolerances. Definitely pinch points when adjusting the ball height and stowing. Count your fingers before and after.
The fastway hitch locks will work on the receiver, but not long enough to replace the pins on the ball adjustment.
I love the product and have owned a few B &W hitches. The only negative about this one was my wife bought it for me and didnt know the difference but purchased one that fits a 3/4 ton truck and not my half ton truck. Even with this I will be buying more B & W hitches, only I will be purchasing them myself.
Love etrailer!!!!
This is an outstanding very durable heavy duty hitch! There’s no doubt it won’t last the life of my vehicle excellent purchase!
Excellent service. Hitch was described perfectly, received prior to original due date. Would definitely recommend. Thank You
With so many companies online selling hitches, I never know which company to pick! Rest assure that etrailer is the real deal!!! For sure will do business again with no hesitation.
I have had this for over a year now and use it on a regular basis with the F350. It stands up to its reputation and is as sturdy and reliable as I could have hoped for. Highly recommended!!
Haven't used it yet just arrived today seems well built, made in the USA a definite plus
Order was easy, delivery was quick, looks good.
Purchased for eldest son. Expert handling by all staff I encountered. Great product made in the USA.
I Received my Hitch quickly. That thing is a TANK ! It is sturdier than I expected. It is highly adaptable. I can tow anything that mounts to a bumper
Everything was delivered quickly and as described. Great to work with
Excellent product.
Fast delivery!
I haven’t used it yet but it looks well built.
Excellent
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.