In-stock alternatives that can ship today
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (162 Customer Reviews)
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
This Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs units is a beast. My personnel feeling for my application it is a bit of over kill but I'm glad I purchased it as I will never have an issue with this item in towing my boat or anything.
Ball mount is awesome! Just what I needed, my aftermarket bumper has a long step that wont allow a normal hitch to work. It sits underneath the step, the only thing that would of work is a ball mount with more of a drop. Then my trailer would of dragged on the ground. I don't have a lift on my F150. I forgot to take some before photos but I have the after photos and its just awesome. Hope this helps!
Great ball mount. Reached out the perfect distance for our big rear bumper, while keeping it to a class IV rating. Only used it a couple times but so far it's perfect for our needs and the quality doesn't appear to be cheap. Thanks etrailer for quick shipment and excellent service.
this is heavy duty and perfect for my setup. I highly recommend this hitch.
Great prices very good customer service shipping is excellent I buy most my truck and r v parts here why look anywhere else
The receiver on our Kubota is kind of tucked up under the bed. With the shorter hitches, it is hard to get to quickly to pull the clevis and drop a feed trough. This is especially important when you have 100 hungry momma cows breathing down your neck looking for more grain. This solved the concern by getting the hitch out where I could quickly get to it.
Will I think the box that arrived with out the hitch in it is poorly designed. The box appears to have a defect in the corner allowing the trailer hitch to escape from its transportation container.
I was looking for an extended ballmount for my dually as a regualr size ballmount with a 2" drop would not clear my heavy duty bumper. I have a 6" drop but it is too low for my new car hauler trailer. After finding this Brophy ball mount, BH20, I ordered it right away. I was pleasantly surprised to receive it in only a few days. I expected to get it in about a week. This ballmount is just as described. Solid, heavy-duty(10K lbs. with a 1K lb. tongue weight) and fits great. See my before and after pics. The extension is enough to clear my bumper while using a 2" drop. Thanks, etrailer!
The order process with Etrailer was exceptional - quick, easy and seamless. I haven’t been able to use the hitch ball mount yet but it seems to be exactly as described. Solidly built with good welds and a significant coating.
Solid, heavy duty. I’m impressed. No bounce or rattle.
Thank goodness for an extended length ball mount. I recently purchased a new 2 horse bumperpull trailer, and the tail gate was interfering with the jack post. Not acceptable! I looked for the highest quality extended length ball mount and found it with this product. Problem solved see pic. ARRIVED IN 2 DAYS! Thank you eTrailer.
The product is as advertised but dealing with etrailer was excellent. They picked my part and shipped immediately. 5 star service from them. Thanks Andrew
Great mount, excellent quality and price, we ours to move a 34ft rigid inflatable boat on a dual axle trailer (GTW 8,500lbs) around South Florida. Never a problem and choice and service from etrailer couldn't be easier-thanks!
I needed a longer ball mount to clear my tailgate and this did the trick.
Jane S. Was the best customer service person helping me acquire the right hitch and lock. Very patient and knowledgeable about your products.
Just the right length to get past the bumper on motor home to be able to pull boat trailer.
This ball mount has been very handy, we tow a enclosed trailer behind our Motorhome and with a shorter ball mount our trailer on tight turns would touch the back corners of the motorhome. But haven’t had that problem any more with this mount, the couple extra inches in length solved our problem. Plus with a weight rating of 10k lbs it has plenty of strength to handle our trailer being loaded up with all our toys (atv & side by side)
Excellent price. Super fast ship. Will use again
Butch - 11/07/2021Heavy duty and exactly as advertised. Long enough to allow me to open my tailgate with the travel trailer still connected.
Just what I wanted. I've been using it to tow a 2 axle trailer weighing 10k. It has been perfect. Before this long ball mount I would get a small amount of deflection using a 10k rated hollow tube mount. With this one, even at the same 10k rating there is no deflection of the solid steel bar. I have a camper on the truck that fits in the bed with no over hang, I like to keep the custom trailer away from the camper Jack's when making tight turns. This is the best I've found.
Jeff M - 01/06/2018I bought a trailer to haul my wife's car from New Hampshire to Florida in the fall and back in the spring. Everything worked great except my truck tailgate hit the crank on the trailer and could not open fully. I needed a longer than standard ball mount. Looked at all the usual suspect without luck. Finally I found Dena at etrailer, a live and helpful person on the phone. How old style! I explained my problem and she located the perfect product and got it to me fast. The ball is now about 4" further from the end of the truck and my problem is solved. Thanks!
The receiver on my Newmar Rv is set back under the rv and my stock receiver would not work. The extended shaft on this hitch allows me to pull a trailer.
We use a 2008 GMC Denali with a tandem axle 16 foot trailer built with extra one foot on the ball mount. When used with the BH20 reciver we can turn the truck all the way to the left or right with out any issues! Great for our lawn care business for getting in and out of our customers.
David J - 06/02/2017The products were perfect for my use. I can now drop my tailgate while the trailer is hooked up. However, more importantly the service was excellent. I recieved the order earlier than expected thanks to a free shipping upgrade. I will not buy my towing and trailer needs anywhere else.
Quality mount. The long shank solved issue of limited tight turning with spare tire mounted on V of trailer.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.