bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 1 Inch
  6. Rise - 1 Inch
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs

Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs

Item # C45019
Retail:$36.23
Our Price: $21.17
You Save: 42%
Trailer Hitch Ball Mount
Orders above $50 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Product Expert Chris R

Is this right for you? Product Expert Chris R says:

Yes, if you:

  • If you plan on towing heavier trailers
  • If you want a bit more versatility with your ball mount
  • If you aren't quite sure what kind of rise or drop you need to tow level

No, if you:

  • If you don't tow too often
  • If you just want a solid ball mount that gets the job done
  • If you have a smaller tow vehicle that can't quite pull a tank
Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Great Prices for the best trailer hitch ball mount from CURT. Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs part number C45019 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (1857)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch Ball Mount - C45019

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 1 Inch
  • Rise - 1 Inch
  • No Ball
  • Class I
  • 2000 lbs GTW
  • CURT
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Both drop and rise positions available to ensure level towing
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Ball hole diameter: 3/4"
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Drop: 1-1/4" from top of inside of hitch opening


How to Measure Drop on Standard Ball Mount

D-227 45019 Curt Ball Mount - 1-1/4" - Class I





Customer Satisfaction Score:


Customer Reviews

Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019

Average Customer Rating:  4.8 out of 5 stars   (1857 Customer Reviews)

Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.

by:

Quick easy installation when less than an hour and a half basic tools little different than the video cuz it was a little bit different of the year but still just as easy looks great on the car highly recommended




by:

The hitch fit and bolted up perfectly!




by:

Great Product, Great Price, and Great Service.....What more could one ask for!!!!




by:

I purchased two drawbars for my Polaris ATV. Good quality and very fast shipping from etrailer.




by:

This is the second hitch I have purchased from etrailer and, again, it was a perfect fit. Everything I buy from here is exactly what they say it is and exactly what I was needing.

I will always recommend etrailer, they have never let me down.

Gene
Houston Texas area.


Comments
All is good. All products are performing as expected and wanted. As usual I am more than satisfied with every product I have purchased from you. I also suggest to others they buy from you asbI have always had good experiences.
Gene - 04/13/2018


by:

This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.




by:

Just what the doctor ordered. Have not welded hitch up yet, however, the arts that I needed are what I received. Prompt service, shipping and due to accuracy of description- perfect and thank you all involved.


Comments
After welding receiver and installing on bike. Have towed trailer several thousand miles with no problems. Thanks again for the great parts and follow up to make sure I am still happy
BigDick - 08/13/2016


by:

I ordered a receiver for my Honda Civic and got a great price, I received my order in 3 days and was able to install it without much hassle by watching a video on YouTube. I then ordered three more items. I needed them in 3 days so I could pick up the trailer I wanted to buy. I received all the items in time. Unfortunately I found that I had got the wrong wiring harness. It turned out ok because I was able to pick up my trailer before nighttime and when I called Emily to ask about the mix up she simply emailed me instructions to return the wrong harness and I am now ordering the correct one. So far they've made everything easy and at a good price. I'm very pleased.




by:

All the items in my order arrived today. Thanks for your continued follow-up on this order and the speedy shipping once you had the item on hand. I also appreciated the installation video and pictures on etrailer. com. I routinely recommend that my customers reference your website for install instructions and product explanation videos. Keep up the good worK.




by:

very good product and easy to install thank you very much I recommend this product and by the way the service is very good thank you




by:

The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.




by:

I'm giving this company an excellent review. We received our product and one part of it was 1/8 of an inch from fitting properly. I called customer service and the lady I spoke with was very helpful. They went through all the hitches like this that they had and figured out the problem. She sent me a new one free and it worked great! Thanks for the awesome service!




by:

Getting the rectangular washers and their bolts into the proper place in the framerails... an hour and a half. Mounting the hitch and trimming the heat shield...ten minutes! Couldn't have done it without the guide wires.




by:

Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.




by:

I always find what I need at etrailer! They sell top quality products and always ship fast.
Thanks!


Comments
Still working great!
Blake T - 07/16/2017


by:

Every thing about the product was as shown. Just was surprised the pin to attach to the existing mount was not included. Just assumed it would be with hitch because it will not work without the pin. Now have to make a trip to find a pin.




by:

Fast delivery. Though the square tube walls where thicker Like Resse hitch receiver is. But it should be fine. The people at Curt know how to produce a item that can meet the requirments for the purpose its intendent to. My spelling is not the greatest.




by:

Had to machine down and repaint to fit hitch. Poor control by hitch or mount manufacturers. Still great etrailer service.




by:

Loved the hitch looks good on the Accord! Installed the hitch in 15 minutes, spent two hours on the wiring. Ordered with the European ball, very sexy!




by:

Receiver insert made of square tube and the drop part of solid steel stock.




by:

Good craftsmanship and finish. Perfect fit. Exactly what I expected.
e trailer was easy to order from and delivery was very timely.




by:

Needed a stinger for my ATV to move a dump cart. Can't go wrong with Curt products.

Great communications and FAST shipping, and the price was right!

All GOOD!!!




by:

I have ordered from Etrailer in the past an once again a superior job shipping was on time products came neatly packed and still looked in the new condition one would expect to see once again awesome job everyone




by:

C45019 Will be used with my short Harbor Freight trailer for lawn mower.

C45024 will be used on a stripped down boat trailer to haul 12' kayak.




by:

The fit is perfect and now my trailer will run level. It should make for a better ride.



25
1857
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount

  • How Much Does the Curt Trailer Hitch # C45019 Weigh
    I spoke with my contact at Curt and he informed me that this Curt Trailer Hitch without the drawbar, part # C45019, weighs approximately 50 pounds.
    view full answer...
  • How Thick is the Steel Used to Make the Shank of Curt Ball Mount # C45019
    The wall thickness of the Curt ball mount # C45019 is 1/4 inch. It can vary slightly because of the black powder coating.
    view full answer...
  • Can A Ball Mount be Flipped for the Correct Amount of Rise/Drop
    The Curt Class I Drawbar part # C45019 can be installed right side up which will give you a rise of 5/8" or upside down which will give you a drop of 1-1/4". However, the above ball mount is only rated for use with trailers up to 2,000 lbs therefore I cannot recommend you use this ball mount to tow a 2,500 lb trailer. For a similar ball mount with equal rise/drop, I recommend the Draw Tite Drawbar part # 36053 which is rated for use with trailers up to 3,500 lbs. I have attached a review...
    view full answer...
  • Dimensions For 1-1/4" Ball Mounts From Ends Of Mount To Receiver Hitch Pins
    Here are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar # 36051 8-3/8" and 1-15/16". Curt Class II Drawbar # C45519 10-3/4" and 1-1/2". Draw Tite Drawbar # 36053 11-1/16" and 2". Curt Class I Drawbar # C45019 10-7/8" and 1-7/16".
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Interchangeable Hitch Ball and Ball Mount Recommendation for a 1-1/4 inch Hitch
    Sounds like you are looking for a multi-ball ball mount similar to the part # PS80425 but for a 1-1/4 inch hitch instead. I have a solution for you, but there are no ball mounts like that for the 1-1/4 inch hitches. Instead you would need a ball mount like the part # C45019 which fits 1-1/4 inch hitches and then an interchangeable ball set like part # 800B.
    view full answer...
  • Is Curt Trailer Hitch Receiver Compatible with 2010 Mini John Cooper Works Clubman R55
    The Curt trailer hitch receiver, part # C11387, fits all models of the 2010 Mini Cooper Clubman including your John Cooper Works Clubman R55. The hitch installs behind the bumper fascia and the exhaust isn't in the way at all. I've linked a video of the install process on a 2013 Clubman as well as the install details. Since the receiver tube is behind the license plate I recommend also adding our fold down license plate holder, part # 8802. Also, Curt requires that you use a support...
    view full answer...
  • Will Loaded Hollywood Racks Over-the-Top Rack Interfere with Trailer Towed by 2014 Subaru Forester
    There are a few factors that will determine how far back the bikes will be from the rear of your 2014 Subaru Forester. The bike in the last position could be as much as 36 inches from the end of the vehicle to the furthest out part of the bike. You can adjust the cradles to bring the bikes closer towards the vehicle. And you can also use a longer ball mount so that the trailer is a little further back. If you have the factory Class I Subaru hitch then you could use ball mount # C45019...
    view full answer...
  • Ball Mount and Hitch Ball to Fit Curt Class I Trailer Hitch Receiver
    The Curt Trailer Hitch Receiver # C11169 is a Class I hitch so it will use a Class I, 1-1/4 inch ball mount. The size of the hitch ball you need will depend on the exact ball mount you choose. For example, if you use the Curt Ball Mount # C45019 it has a 3/4 inch ball hole diameter so you can use # C40001 for a 1-7/8 inch ball or # C40018 for a 2 inch ball. Both have a 3/4 inch shank. When choosing a ball mount you'll want to make sure you get one with the rise or drop you need based...
    view full answer...
  • Recommended Ball Mount for Harley Davidson with 1-1/4 Inch Hitch Receiver
    We currently do not carry any stainless steel or chrome ball mounts for the 1-1/4 inch receiver size. We do however have many options that have the black power coat similar to the frame of your Harley Davidson and chrome hitch ball options to give you that chrome accent. I recommend the Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs # C45147 or the euro ball style ball mount # C45552. Both of these give you a 2 inch hitch ball. If you want the 1-7/8 inch...
    view full answer...
  • What Is The Class Rating And SAE Certification Of The Curt Class I Trailer Hitch Receiver, # C11387
    The Curt Class I Trailer Hitch Receiver, # C11387, is a Class I hitch with a SAE J684 Certification. I called the supplier (Curt) about the SAE certification and they said the J684 certification is a federally mandated certification that has to be on all trailer hitches. The Curt Class I Trailer Hitch Receiver, # C11387, will fit the 2008 Mini Clubman. It has a gross towing weight of 2,000 lbs. and a tongue weight of 200 lbs. If this hitch is used for non-trailer loads, like bike racks...
    view full answer...
  • Recommended Trailer Hitch For 2009 Mini Cooper S Clubman
    The trailer hitch that is confirmed to fit your 2009 Mini Cooper S Clubman is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11387. If you will be using this hitch for towing, I recommend the Curt ball mount # C45019 along with hitch ball # C40001 for 1-7/8 inch or # C40018 for 2 inch diameter. You will also need a pin and clip like # F-4. For wiring, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will protect...
    view full answer...
  • Recommended Trailer Hitch For 2012 Chevrolet Sonic
    There were two models of the Chevrolet Sonic lt in 2012. One is a 4-door sedan and the other model is a 5-door hatchback. If you have a 4-door sedan then the trailer hitch I recommend is part # 24876. This is a Class l trailer hitch and it has a 1-1/4 inch receiver opening. For a 5-door hatchback I recommend part # 24878. This is also a Class l hitch with a 1-1/4 inch receiver opening. I recommend the Draw-Tite trailer hitches because a stabilizing strap like part # 18050 is not required...
    view full answer...
  • Curt Trailer Hitch For 1999 Honda Civic Hatchback
    The # C11209 measures 6-1/8 inch of clearance from the mounting surface on the frame to the bottom of the safety chain loops under the hitch receiver opening. You can measure from the frame downward to see where you will wind up with the bottom of the hitch. This is a Class l hitch, it has a 2,000-lb towing capacity and a 1-1/4 inch receiver opening. You will want to make sure you do not exceed the towing capacity of your Civic. Curt requires that a stabilizing strap like part # 18050...
    view full answer...
  • Does Curt Hitch C11448 Fit a 2017 Audi A4 All Road
    We do offer a 1-1/4-inch light-duty Class I hitch for the 2017 Audi A4 Allroad. My technical contact at Curt confirmed that their Class I hitch # C11448 is a fit and will work well. If you are planning on towing I recommend a ball mount like part # C45019. This ball mount has a 5/8 inch rise or 1-1/4 inch drop and measures 9-3/4 inches long. For a hitch pin and clip you can use part # F-4. For a 1-7/8 inch hitch ball I recommend part # C40001 and for a 2-inch ball I recommend part # C40018....
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2017 Audi A4 Avant
    The Curt Trailer Hitch Receiver, part # C11448 is a confirmed fit for your 2017 A4. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I recommend the Draw-Tite Sportframe Trailer Hitch, part # DT24950 over the Curt hitch because Curt requires the use of a stabilizer strap like part # 18050 for all non-trailer loads. It can be very difficult to find a good attach point on some vehicles. If you are planning on towing I recommend a ball mount like part # C45019. This ball...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830