bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 0 Inch
  6. Rise - 4 Inch
Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs

Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs

Item # C45023
lowest price pledge
Retail:$46.04
Our Price: $32.31
You Save: 30%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Corrosion-resistant ball mount is 11-1/2" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. Lowest Prices for the best trailer hitch ball mount from CURT. Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs part number C45023 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1751)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch Ball Mount - C45023

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 0 Inch
  • Rise - 4 Inch
  • No Ball
  • Class I
  • 2000 lbs GTW
  • CURT
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Corrosion-resistant ball mount is 11-1/2" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Drawbar can be used in rise position only
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Ball hole diameter: 3/4"
  • Length: 11-1/2" from center of hitch pin hole to center of ball hole
  • Rise: 3-3/4" from top of inside of hitch opening


How to Measure Drop on Standard Ball Mount

D-231 45023 Curt Ball Mount - 1-1/4" - Class I






Customer Reviews

Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs - C45023

Average Customer Rating:  4.8 out of 5 stars   (1748 Customer Reviews)

Corrosion-resistant ball mount is 11-1/2" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.

by:

High quality products!
“NOAH E” helped
me selecting the right set up! Great customer service highly recommended!!



by:

E-Trailer fits like a glove and is so easy to install. Thanks



by:

Bought for '13 wrx for kayak trailer. Solid build. Quality from Curt and etrailer.



by:

Just what I needed. Fast delivery.



by:

This was such an awesome experience!!! My husband and I stumbled across etrailer.com when we searched onlline on how to install a hitch. We then purchased all the materials needed directly from the website. Neither of us know a whole lot about cars but were able to easily install the hitch and wiring by watching the video and the paper instructions sent with the products. The part of this experience I am MOST impressed by is when I got a call shortly after placing my online order to let me know that what I had originally purchased was not compatible with each other. She then continued to efficiently and successfully modify my order to all the right products needed and I didn’t have to do a thing! If that’s not great customer service then I don’t know what is!!! Without that phone call, I would have received incompatible products and been in a real pickle due to time constraints. THANK YOU SO MUCH ETRAILER! You guys rock! Because of you, I now have so much more confidence in doing self-maintenance on my car.



by:

Very impressive. I needed just this drawbar's length and rise, and it seems to me to be a Class II instead of Class I. My old (too short) drawbar (also from Curt) had a tubular body and I was impressed that this one is of solid barstock. My gross trailer weight is less than 400 lbs, so this drawbar might be considered overkill--if indeed there is such a thing in trailer-world. My receiver is also made by Curt. Overall, I'm very happy with Curt's stuff. For what it's worth, I also slammed on a Hitch-Vise from Hitch Rider to keep the rattle of such a long drawbar down. It was worth the $$. I think eTrailer should add the Hitch-Vise to their line of already neat stuff.



by:

Everything I've ever ordered from ETrailer been of the highest quality, the highest in customer service and shipping etc. keep up the good work!


Comments
Excellent, it’s just what I needed.
Bill F - 02/25/2018


by:

Excellent fit



by:

This was great. I have a Sienna with low height. THis was perfect to raise the height to a useable level for my trailer. I am very pleased. And delivery time was perfect!



by:

Great fit and good rise. It puts my trailer at the right height. It looks to be well made and has a good finish.



by:

Recieved ahead of schedule, installed as the video showed.
Just as I expected.
Thank you
JW



by:

Great fit. Perfect height. Thanks


Comments
Products all are great. Use o tow MIX trailers
Ken - 01/30/2019


by:

Great as advertised



by:

It fit, was the right length and worked as advertised.



by:

Just what i expected



by:



by:

Fast shipping item was just what it said it was



by:



by:

VERY SATIFIED



by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


I installed this on my 2015 Honda Accord for the purpose of pulling my small aluminum fishing boat and trailer. Works great!



by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


I received what was ordered but it seems like it will be too low for a trailer. I called the company, and the lady was very professional. She verified that I had the correct part and sent info to me on measuring rise & drop for the hitch. I haven't purchased a trailer yet so I will re-order if needed.



by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


Used on my 1999 Dodge Intrepid's CURT 12006 Class II 1.25 in. Receiver Hitch: 350lbsTW/3500 lbs GTW. I use this Curt Class II Drawbar - 3-7/8" Rise - 11-1/4" Long - 3,500 lbs to tow a 3,500+ GTW dual axle trailer. I have used it with the trailer FULLY loaded and it performs EXCELLENT. You have to make sure the trailer is loaded correctly so as not to put too much down force on the tongue/drawbar. I was skeptical that the SOLID 1.25" bar would not take the load, but it is super strong. I chuck it in the trunk when not in use to protect passerby's shins, but it sticks out far enough clear the Intrepid's bumper, and is solid with a 2" ball (required a bushing). etrailer got it out fast at a good price! I would totally purchase this again from them.


Comments
I stand by my review completely. Super rigid drawbar and powder coating has held up well. Not much to go wrong with it and I am still amazed at its strength.
Christian v - 06/10/2019


by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


I'm very glad to have gotten this hitch, in the year I've had it it's allowed me to trailer motorcycles twice and move myself, saving terrific money over renting a truck. I only wish I had ordered it sooner.
Installation wasn't terribly difficult, though breaking loose the bolts where the hitch installs would likely have been quite unpleasant if I didn't have an 18" wrench handle.



by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


Fantastic vehicle-specific hitch! I had it unpacked and installed in half an hour and most of that time was finding tools! Instructions were clear and simple, and I couldn't be happier with my purchase!



by:

Review from a similar Curt Drawbar in Trailer Hitch Ball Mount


I am an infrequent trailer user, but getting my daughter home from college was necessary in March. This drawbar fits my hitch and utility trailer well, did exactly what it is supposed to do, and was the last thing to be concerned about right then. I have a '11 Mini Countryman S with a Class II receiver from Mini Fini, (which cost twice as much as a Curt) where the hole is flush with the fake grille near the bottom of the bumper cover, so I needed the long bar to reach out past the bumper. The Curt receiver for that car hangs visible underneath the bumper (ugly), which also increases the lever arm on the receiver beam and would have needed an even taller rise. (Curt take note!) All just part of the kit to create an occasional 1 ton pickup out of my Mini, leaving the "bed" at home most of the time.


25
1750
Show More Reviews

Ask the Experts about this CURT Trailer Hitch Ball Mount



  • Recommendation 1-1/4 Inch Drawbar with 3-1/2 Inch Rise on 2015 Nissan Altima
    We have a 3-3/4 inch rise that works great with your trailer, item # C45023 . It's the Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long - 2,000 lbs drawbar. It is slightly taller than your desired rise. But once the trailer is hooked up, the weight will bring it down closer to that 3.5 inch you were looking for. Also, this drawbar is a Class I which suits your hitch. We have a review video for this product that I've included. You could use a Class II drawbar with your Class I hitch since...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Kia Rondo
    Yes, you can tow a trailer with your 2008 Kia Rondo. I found a copy of the owner's manual online and found the following towing capacities. First, if the trailer does NOT have brakes models with the 2.4 or 2.7 liter motor can tow 1,000 pounds. If the trailer does have brakes then the 2.4 can tow 1,500 pounds and the 2.7 can tow 2,000 pounds. The tongue weight capacity for the 2.4 liter is 150 pounds regardless of whether or not the trailer has brakes. And for the 2.7 liter it is 200 pounds. I...
    view full answer...
  • How to Determine the Rise/Drop of Class I Ball Mounts
    There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that of the receiver, you'll need a ball mount with a rise. If the coupler height is smaller than that of the...
    view full answer...
    Image 1 for
  • Determining Which Drop/Rise Ball Mount will be Needed to Transport my Coleman Popup Camper
    I can help you figure out what which ball mount you will need for your Mazda and Coleman popup camper. There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that...
    view full answer...
  • Interchangeable Ball Set for a Curt Class I Trailer Hitch and Ball Mount for a 2008 Mini Cooper S
    The Curt trailer hitch for a 2009 Mini Cooper S is # C11130, which is a Class-1 hitch with a 1-1/4" square receiver opening. This is for hardtop or convertible, but not for models with a single center exhaust. You will need a ball mount and tow bar to tow a small trailer. I recommend the Curt # C45023 mount and a Curt # C40018 hitch ball with a 3/4" diameter shank. For wiring use kit # 119190KIT. I have linked the wiring instructions as well.
    view full answer...
  • Trailer Hitch Receiver and 4-Way Wiring Harness Needed To Tow a Utility Trailer with 2022 Kia Seltos
    First you will need a Curt Trailer Hitch Receiver # C65FR to attach to your 2022 Kia Seltos. This class I receiver has a 1-1/4" receiver tube and is capable of supporting up to 200lbs of tongue weight and 2,000lbs trailer capacity. Be sure not to exceed the towing capability of your Seltos given by Kia. A Tekonsha T-One Vehicle Wiring Harness # TK49FR will allow you to plug into your factory tail light wiring so that you do not need to splice into your tail light harness. You will need...
    view full answer...
    Image 1 for
  • 2021 Kia Soul Trailer Hitch and Wiring Recommendations for Towing a Trailer
    To get your 2021 Kia Soul ready to tow a trailer you're going to need a trailer hitch, wiring kit for the trailer lights, and a ball mount kit. Please note that when I looked up the online owner's manual for your 2021 Kia Soul it stated that Kia does not recommend towing with your vehicle. If you choose to still do so I recommend using the parts mentioned below. I recommend going with the Curt Trailer Hitch Receiver # C67FR and T-Connector Wiring # C89KR for the parts that install on your...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.