Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
(403 reviews)
Price: $36.10
In Stock
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
Item # C45154
Retail:$60.17
Our Price: $36.10
You Save: 40%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (403)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45154
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 4 Inch
- Rise - 0 Inch
- 2 Inch Ball
- One Ball
- 7500 lbs GTW
- Class III
- CURT
- Steel Shank - Gloss Black
- Steel Ball
8-1/4" Long ball mount features a permanently welded hitch ball that cannot be stolen or loosened. 2" Diameter hitch ball is chrome plated. Pin and clip included. Ball mount can be used in the drop position only. Fits 2" hitches.
Features:
- Ball mount with permanently attached ball lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Hitch ball provides connection point for your trailer's coupler
- Hitch ball is welded to ball mount platform - no need to torque
- Prevents theft of the hitch ball
- Eliminates loosening of the hitch ball for a strong and secure towing setup
- Sturdy steel construction with rust-resistant finishes
- Black powder coat finish on ball mount
- Chrome-plated hitch ball
- Pin and clip included - hitch lock sold separately
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Ball size: 2"
- Length: 8-1/4" from center of hitch pin hole to center of ball
- Drop: 4" from top of inside of hitch opening
- Limited lifetime warranty
45154 Curt Loaded Ball Mount w/ Welded Ball - 2" Square Ball Mount with 2" Chrome Hitch Ball - 4" Drop
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs - C45154
Average Customer Rating: 4.9 out of 5 stars (403 Customer Reviews)
8-1/4" Long ball mount features a permanently welded hitch ball that cannot be stolen or loosened. 2" Diameter hitch ball is chrome plated. Pin and clip included. Ball mount can be used in the drop position only. Fits 2" hitches.by: Sully07/24/2023
All of the products I've have bought for my trailer project from etrailer have been great. My go-to place for anything trailer related!
by: Pauline 09/06/2023
Perfect drop and keeps our RV trailer level. Good quality and shows no sign of wear.
by: Phil 10/05/2023
Haven't set this up yet but quality feels good. User error on my part as this is not a ball I can replace but the flat bed I plan on buying for my motorcycle is a 2" so not a big deal and the price was a decent buy.
by: David11/19/2021
This Fusion ball mount has the correct drop for a 2020 Chevrolet Traverse. Fits nicely in factory hitch. Completely happy with its performance.
by: Wes 07/06/2023
Wow! Fast delivery, easy install. I saved lots of money and time. Thank you. I have already recommended etrailer to several people.
by: George10/18/2022
would definitely give these items and more importantly your sales and service. 5 stars
My new F150 has a taller tailgate and the hitch receiver is farther under the bumper than my old ‘06 F250. It is also a little higher off the ground.
One picture shows how the tailgate hits tongue Jack on my utility trailer.
The ball was 8” from the receiver. The extension and new 4” drop ball mount move the ball to 14”.
So now the tailgate can open completely. Of course I needed to lengthen the chains and wiring pigtail. The trailer is only rated for 2900 lbs so it won’t exceed the decrease in load rating.
by: Mike S08/23/2019
This was the right set up for my 2018 4Runner. Works great. As a footnote, I now have a second vehicle for towing (2019 Tundra 4X4). Using the measuring process provided by etrailer folks, I found the same ball works great on the Tundra.
Thanks!
by: John 08/17/2023
Fit perfectly
by: Dennis L.06/20/2017
I haven't used this yet, but will be shortly. I had a 2" drop ball mount that served double duty for my utility trailer and our pop-up camper. I had a small extension welded onto my previous mount for a friction sway-controller that I used with the pop-up. We sold the pop-up a couple of weeks ago, and I figured that it would be worth setting the new owner up right with the correct ball mount that also accommodates the sway-controller.
Also, where I was towing with a 2003 Ford Explorer with an aftermarket hitch before, I now have a 2013 Explorer with the factory tow package and the receiver is tucked up higher. This makes my utility trailer tongue-high and not handle the highways so well. The 3 1/2" drop should cure this.
Again, as always, the service and shipping from etrailer.com are top notch.
Dennis L.
6/21/2018
A good, solid ball mount. I could have gone for slightly more, but this works well.
by: John08/10/2022
Economical offering that installed as easy as expected. Seems to be a decent sized gap between the hitch and the receiver, will likely lead to some noise as it moves around given all the play, but not dissimilar from prior purchases. Sure it will do just fine. Like that the ball came torqued and permanently installed, suits my needs perfectly.
by: Malcolm 04/26/2023
Good delivery time and quality product.
by: Arlin T.03/22/2018
etrailer has been a blessing. They review my situation and help me with the correct product. I only use my C45154 when I'm ready to tow a trailer. Other than that, I've my 2018 Super Bowl Championship Team cover. Philly Philly.
by: Dennis 03/31/2020
I have wanted a trailer hitch for years but I never realized how easy it was to order and install myself. I ordered the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75235 and the Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 3-1/2" Drop - 7,500 lbs - C45154. They were both delivered 6 days after my order in perfect condition and I watched the video to learn how to install them. It took me less than 30 minutes and all I needed was a 17mm and 19mm socket wrench. So easy, would definitely recommend!!
by: Christopher12/29/2018
My order consist of products from well known companys - Curt and Master Locks which are all Quality Made. I bought these items before picking up my Trailer,so to have ready for hookup. After looking at products ,they are new from the companys and ready to be used.I may have to update my Review after using products for 6 -12 months.,I did buy alike keys not knowing i couldn't get same keys for Hitch and Coupler,so i called Etrailer and they will Credit me back that amount.,Other than this no problem,yet. I'm thinking these products will last me for a very long time.
by: Bob S07/03/2021
Great hitch for general light duty use. The gentle drop is perfect for pulling the jet skis and the occasional U-Haul trailer in-route to the dump. The receiver pin and clip are nice adds but I prefer a locking pin to keep the tongue and hitch ball on MY truck. Five star city this product.
by: John W05/03/2019
I am really impressed with etrailer.com. I ordered , with ease, several items and received them all within a few days. I ordered a hitch extender, a tire cover for my spare, several locks, and caps for my trailer’s wheels.Each product is well made and everything is exactly as I expected. Best online company I have ever dealt with. I will definitely use them for all future trailer needs.
by: Ian S.11/01/2016
Just a simple hitch ball in the drop and size I needed. Always good pricing and quick shipping with etrailer!
by: John06/04/2021
I’m very pleased. You guys are, by far, the BEST!
I really wanted a quality ‘Curt’ hitch set-up for my SUV.
You made the shopping easy, with quick order/ shipping turn-around. I really appreciate the quality of your services.
by: Gladys04/19/2019
Great product,great price,look forward to installation.Fast friendly service too.
Gladys
4/20/2020
works fine,best price too,great company to buy from !!!
by: John S08/23/2018
Very satisfied with the ball mount and ease of ordering. I was having trouble finding a 7500 lb rated stinger with a four inch drop locally. Jumped on etrailer.com and found exactly what I wanted at an great price.
by: Corey 08/12/2022
The product was just what I needed and the customer service and delivery was amazing. Great people to work with.
by: Northern Guy08/29/2018
Have used etrailer on many occasions and as always the service, shipping , and quality of products are just what I am looking for. So happy to have their products and expertise available, thanks to all.
by: Doreen O05/10/2017
My husband is happy with the hitch and excited that we got it so soon.
25
450
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- How to Pick Out Ball Mount for 2020 Toyota TacomaI attached a help article that details exactly how to pick out the correct ball mount for your towing setup with your 2020 Toyota Tacoma but I can't tell you exactly what you'd need without more info. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom...
view full answer... - Recommended Ball Mount For Towing a U-Haul Trailer With a Vehicle Receiver Height of 23" I recommend using the Curt Fusion Ball Mount # C45154 for towing the U-Haul trailer with your SUV. This ball mount has a 4" drop to help level the trailer. It is important to level the trailer as best as possible when towing. Having the trailer level will help reduce the chances of the contents moving around and will help prevent damage to the trailer if the rear of the trailer is to close to the ground. It can also prevent you from being able to back into some driveways on hills if the...
view full answer... - Solution for Bouncing Trailer with Low Tongue WeightA weight distribution system wouldn't really help much in your situation. What you can do to help with the bounce is try moving weight up near the front of the trailer so that you can get the tongue weight of the trailer to be 10-15 percent of the total trailer weight. Getting the trailer as level as possible will also help. If your trailer is sitting nose high currently then that will also contribute to the bouncing. The part # C45154 is a 3 inch drop ball mount with a 2 inch hitch ball....
view full answer... - Comparing The Curt C45056 And C45154 Ball MountsThe difference between the # C45056 and the # C45154 is that the # C45154 is a fusion ball mount. Meaning the ball is permanent and can not be removed from the draw bar. The # C45056 has a removable ball. This allows it to be used in either the drop or rise position. Also, if you ever had a need to swap it out for a 1-7/8" or 2-5/16" ball you will be able to do so. Other than that they are virtually identical with a 7.5K capacity. If you will only ever be towing one horse trailer that uses...
view full answer... - Recommended Curt Ball Mount without Hitch Ball with 4 Inch Drop and 7,500 Pound CapacityThe Curt Class III Ball Mount # C45042 referenced in your question includes a pre-torqued 2-5/16 inch hitch ball. This exact ball mount is not available from the manufacturer without the hitch ball, but I do have an option that should work well. I recommend taking a look at the Curt Ball Mount # C45154. This 2 inch ball mount features a drop of 3-3/4 inches or a rise of 2-1/2 inches. It features the same 7,500 pound towing capacity as the Curt unit you were looking at but also has a nice...
view full answer... - Difference Between Standard and Fusion 2" Curt Hitch Ball MountsThe Curt Class III Ball Mount # C45056 comes with a standard 2" hitch ball that can be removed and used in the drop or rise position with the ball mount while the Curt Fusion Ball Mount # C45154 has the 2" hitch ball welded to the platform so it can only be used in the drop position. The Fusion looks a little cleaner but it does lose that rise position so I recommend going with the standard # C45056 just in case you ever need to remove the hitch ball and reinstall it on the other side...
view full answer... - How to Choose a Ball Mount for a 2018 Toyota 4RunnerIn order to choose the correct ball mount for your new 2018 Toyota 4Runner you will first need to measure from the ground to the top inside edge of your trailer hitch and then from the ground to the bottom of the coupler on your trailer while level. The difference between the two measurements will tell you the correct amount of rise/drop you need to look for in a ball mount. Once you obtain these measurements you can either let me know what they are so I can make a recommendation or use...
view full answer... - Can Curt Fusion Ball Mount be Used In The Rise PositionThe Curt Fusion Ball Mount for 2" Hitches # C45154 is not meant to be used in the rise position because the hitch ball is stationary. However, we have better alternatives. One of our most popular products is the etrailer.com Ball Mount Kit for 2" Hitches # 989900. it includes everything needed to tow multiple trailers, even of different heights. It includes a ball mount with 3/4" rise or 2" drop and another ball mount with 2-3/4" rise or 4" drop. Also includes a 1 7/8" and 2" trailer...
view full answer... - Curt Ball Mount with Drop Near 3-1/4 inchThe closest we have is the Curt part # C45230 which has a drop of 3-5/8 inches or the # C45154 which has a 3-1/2 inch drop and a 2 inch ball or part # C45151 which has the same drop and a 1-7/8 inch hitch ball.
view full answer... - Can I Replace Rear Panel on 2022 Cadillac XT4 with Draw-Tite Hitch InstalledYes, once the Draw-Tite Max-Frame Trailer Hitch Receiver # 76266 is installed on your 2022 Cadillac XT4 you'll be able to place that rear bumper fascia cover back over it for an OEM look. I'm attaching an installation video and some photos for you to check out about this. If you're planning on doing some towing with this hitch then I also recommend picking up the T-One Wiring # 118795, the Mount Bracket # 18144, and the Ball Mount Kit # C45154. Attached are some additional videos for...
view full answer...
- Is There a Hitch for the Elite Model of the 2022 Honda Passport?The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13421 is a confirmed fit for all models of the 2022 Honda Passport including the Elite. If you are planning on towing then you will need the Curt T-Connector Wiring Harness item # C56291, the Mounting Bracket item # 18140, and a ball mount kit like the Curt Fusion Ball Mount Kit item # C45154.
view full answer... - 2014 Mercedes-Benz GLK250 Trailer Hitch and Wiring RecommendationsFor your 2014 Mercedes-Benz GLK250 we have the Curt Trailer Hitch # C13155 and then for wiring you can either use the Tekonsha ZCI # 119250KIT which uses clamps to sense when to send the signals to your trailer so you aren't cutting into your OEM wiring. Then to complete your towing setup you need a ball mount kit like the Curt Fusion # C45154. Attached are some videos for you to check out.
view full answer... - Will 2022 Honda Passport Hands Free Liftgate Still Work with Trailer Hitch InstalledThe Honda sensor kit you're talking about is a relocation kit so the hands-free liftgate will function as normal with a hitch installed. You can install either the Curt # C13421 or Draw-Tite # 76290 hitch on your 2022 Honda Passport and it shouldn't completely cover those sensors though. You should be able to just kick to either side of the receiver for the sensors to pick up your foot as opposed to swiping under the bumper like normal. The adapter kit is separate from the OEM hitch (although...
view full answer...
- Will the Trailer Hitch and Wiring be Different for a 2021 Sante Fe Hybrid?You are correct. The Curt # C34ER will install the exact same way on your 2021 Hyundai Santa Fe as a Kia Sorrento. This will also fit any trim options, including the Hybrid. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat # CU94FR has much the same fitment specifications. This plug and play harness will take no time to get installed and will get you on your way. The last part you will need to complete your towing set up, will be a ball mount. You will need to confirm how...
view full answer... - Curt Ball Mount RecommendationThe Curt Fusion Ball Mount for 2" Hitches, # C45154, is a great fit for your 3-1/2 inch drop. You may also want to consider an adjustable ball mount like Curt's Adjustable 2-Vall Mount, # C45902. An adjustable ball mount will allow you to adjust rise or drop for most trailers without needing multiple mounts. I also attached an FAQ on how to pick the correct rise/drop ball mount.
view full answer... - Options for a 2 Inch Ball Mount that Comes with a 2-5/16 Inch BallThe ball mounts that have a ball welded on are all either 2 inch or 1-7/8 inch diameter balls. We have some ball mounts that come with a 2-5/16 inch ball bolted on: # C45331 # C45332 # C45041 # C45042
view full answer... - Ball Mount Recommendation for 2008 Chevy Colorado that Needs 2.875 inch DropSince not every possible drop/rise is available from ball mounts the best choice is to go with the drop/rise that gets you as close to the needed figure as possible while considering some suspension sag from the trailer's tongue weight. So considering all of that a 2 inch drop is going to be the best choice for you like the ball mount part # D-4. Once the tongue weight of your trailer is on the rear of the vehicle this will put the trailer right at level. For a 2 inch ball to fit this...
view full answer... - Availability of a Ball Mount with a 3-Inch Drop and 3/4 Inch Ball Hole DiameterI have two options for you to consider The Curt ball mount # C45220 will have a 2-3/8 inch drop and ball hole diameter of 1-inch. It's the closest to the 3-inch drop you referenced but currently there isn't any with a 3-inch drop only. The gross towing weight of the Curt ball mount is 7,500 pounds and tongue weight is 750 pounds. You can use a hitch ball bushing # 320000 to reduce the diameter of the hitch ball hole from 1-inch to 3/4 inch. See the picture I included. Another fixed ball...
view full answer...
- What All is Need for Flat Towing a 2014 Mazda CX-5?To tow your 2014 Mazda CX-5 behind your motorhome, it will require a few things. First, your CX-5 must be equipped with standard front-wheel drive. If your Mazda CX-5 has AWD, it should get towed with all four wheels off of the ground. Next, the Demco Kar Kaddy X Tow Dolly # DM9713093 will have disc brakes, offering superior stopping abilities. The tilting bed frame also allows for easy loading and unloading of the vehicle. The only downside to this option will be that it takes up a fair...
view full answer... - Measuring for Correct Ball Mount on 2017 Chevy ColoradoBased on your measurements you are looking for a 4-1/4 or 4 inch drop for your ball mount. I've attached an article to assist. If you want a fixed mount ball mount, I recommend the4 Curt Class III Ball Mount with 2" Ball - 4" Drop - 7,500 lbs # C45056 if your trailer has a 2 inch ball coupler. If the coupler fits a 2-5/16 inch ball, then I recommend # C45042 instead. These will work well for towing 7,500 lbs with a 750 lbs tongue weight. Anything beyond that should use a weight distribution...
view full answer... - Recommended Hitch and Towing Package for 2012 Jeep Liberty to Transport Little Guy TrailerGreat news! I can help outfit your 2012 Jeep Liberty to be able to tow your Little Guy Trailer. First let's start with a trailer hitch for your vehicle. I recommend the Class III Draw-Tite Max Frame # 75578. I have linked an installation video on a similar model to yours for you to check out, the two vehicles are from the same generation so they should look exactly the same. Next, it sounds like your vehicle did not come with the factory 7-way so you will need to install a 4-way like...
view full answer...
- Availability of Hitch Ball Welded to Ball MountWe actually have exactly what you are looking for - no modification needed! I have attached a link to our selection of ball mounts that have 1 hitch ball included, like the Curt # C45154 rated for 7,500 lbs. You can filter through the options to find the correct ball mount for you application. If you would rather have a completely powder coated option with multiple hitch balls I recommend using the B&W Triple Tow Tri-Ball Mount for 2" Hitches # BWBMTT31004. This features 3 hitch balls...
view full answer... - Ball Mount and Roof Rack for 2015 Ford EscapeLet's start with the ball mount; since your Escape has a towing package and a hitch, you should start with a ball mount. You mentioned a Class II hitch so I am assuming your receiver is 1-1/4". As for the correct rise or drop, since your camper company specified 16 inches to the top of the ball you'll only need to measure from the ground to the top of your hitch receiver and find the difference between the two measurements. If the height of your hitch is greater, you will need a ball...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Mike S
Updated by:
Noah M
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David S.
11/20/2022
This ball mount has seen a lot of use and is doing great. No issues, just normal wear.