Curt Class II Euro Style Drawbar with 2" Ball - 5-1/8" Rise - 3,500 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Does Curt Trailer Hitch for 2000 Lincoln Town Car Come with the Mounting Hardware
  Yes, all of the hardware needed for installation is included with Curt trailer hitch # C12130. If you plan on doing some towing you can use the nifty Curt Euro ball mount # C45592 for a 2 inch ball or # C45591 for a 1-7/8 inch ball. And for trailer wiring you can use # C59496 to add a 4-Way flat to the rear of the vehicle.
  view full answer...
• Curt Euro Ball Mount Recommendation with 1-7/8 inch Diameter Hitch Ball
  Yes, Curt does have a Euro ball mount that has a 1-7/8 inch hitch ball. For that we have the part # C45571 which has a rise of 2-5/8 inches. Or for a rise of 3-1/8 inches you'd want the part # C45561.
  view full answer...
• Recommended Euro Style Drawbar with 7 Rise
  I may have a solution for you, but we don't have any Euro style drawbars with a 7" rise and after doing some digging I'm not quite sure they are available that tall . With that said, you may be able to use the Curt # C45591 which has a 5-1/8" rise. This would be the closest solution to the 7" you're looking for. If you were willing to use a non-Euro style draw bar, you could use the Brophy # BM96, which has a 5" rise from the top of the shank to the top of the ball mount platform. You...
  view full answer...
  
• Curt Class II Euro Style Drawbar # C45592
  After speaking to my contact at Curt, I found the most height extension you can achieve with the Curt Class II Euro Style Drawbar # C45592 for your 2011 Volkswagen Golf is with the Curt Class II Drawbar # C45015. This is a 5-1/8 inch rise drawbar which provides a total height increase of 2 inches for any cargo you would tow with your vehicle.
  view full answer...
• Hitch and Trailer Lights Wiring Harness for 2022 Kia Soul
  For your 2022 Kia Soul, as long as it's not the 1.6L Turbo model, I highly recommend the Draw-Tite Class III Trailer Hitch # DT25GR. This is because it offers a 2" receiver which will open the door up to many more options when it comes to hitch-mounted accessories like a bike rack or cargo carrier. It's also going to provide a much sturdier attachment point to your trailer. For your lighting needs, I suggest the Curt T-Connector Vehicle Wiring Harness, # C89KR. With this option you can...
  view full answer...
  
• How is the Rise Measured for Curt Euro Style Ball Mounts
  On Curt Euro ball mount # C45592 we are measuring from the top of the shank to the point below the ball where it starts to go straight up and down. I have linked a video that should clarify this for you. Curt must be measuring to the top of the ball.
  view full answer...
  
• Recommendation For Trailer Hitch and Wiring on a 2022 Toyota Prius
  I recommend the Curt Trailer Hitch Receiver, # C11473. This is a Class I, 1-1/4" hitch that works well for light-duty towing. It is a bolt-on installation so no welding is required and comes complete with needed hardware for installation. It is rated for 200 lbs. of tongue weight and 2,000 lbs. max gross trailer weight. This will work well for towing your boat or carrying a bike rack. For needed wiring, I suggest the Curt T-Connector, # C69KR. With this, you can easily install a 4-way...
  view full answer...
• Dimension From Pin Hole to End of Ball Mount # C45592
  The distance from the center of the pin hole to the end of the shank that slides into the hitch is 1-7/8 inches.
  view full answer...
  
• How to Select the Correct Rise or Drop for a Euro Style Drawbar on 2017 Subaru Outback
  Thank you for the dimensions; you correctly measured from the ground to the top of the hitch on your 2017 Subaru Outback, though the other measurement is from the ground to the bottom of the coupler. Assuming your coupler is roughly 2 inches tall, from the ground to the bottom of the coupler would be approximately 18 inches. Since the top of your hitch is 15 inches, you need a drawbar that gives you about 3 inches of rise. For Euro Style drawbars rise is measured to the beginning of the...
  view full answer...
  
• Recommended Euro-Style Ball Mount for a 2015 Nissan Altima with Curt Class I Trailer Hitch
  The recommended 2 inch Euro style ball mount for Curt trailer hitch # C11352 on a 2015 Nissan Altima is # C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it starts to bend up is 3 inches. This will work because the rear bumper on the Altima tapers upward above the hitch receiver. At 6-1/2 inches out from the center of the hitch pin hole, where the shank starts to bend straight up, it is at a height...
  view full answer...
  
• What is the Ground Clearance with a CURT Trailer Hitch Installed on a 2012 Volkswagen Eos
  I spoke with my contact at CURT regarding trailer hitch # 11090. What you can do is measure from the bottom of the vehicle frame straight down 8-1/2 inches. This is where the bottom of the receiver will be when the hitch is installed. So if you measure from that point to the ground (on level ground) that will give you the ground clearance measurement. If you used a ball mount with a 5 inch rise and a ball that is 2 inches tall, add seven inches to get a general idea of where the top of...
  view full answer...
• Trailer Hitch Recommendation for 2015 Mazda 3
  I'm unaware of a Class II hitch available for the 2015 Mazda 3. A Class I hitch, like the Draw-Tite # 24914 would have a 2000 lb towing/200 lb tongue weight capacity. This hitch would handle a 1000 lb trailer with no problem, but since the hitch capacity is lower than the 2500 lb towing capacity of the vehicle, you'll be limited to the capacity of the hitch. I was unable to find reference to the 2500 lb towing capacity you mentioned. In the US version of the owners manual, Mazda doesn't...
  view full answer...
• Does Coupler Latch Need Adjustment to Use Euro-Style Ball Mount Like # C45592
  By 'clasp', I assume you're speaking about the latching mechanism on the trailer coupler. If your current coupler is compatible with a 2 inch trailer ball, it will operate just fine with the Curt Euro Style Ball, part # C45592. As long as the ball diameter is compatible with the coupler, you shouldn't need to adjust anything.
  view full answer...
• Ball Mount to Fit Hitch of 2018 Subaru Crosstrek
  The Curt ball mount part # C45592 only fits Class II 1-1/4 inch trailer hitches. If you happen to have a factory hitch on your 2018 Subaru Crosstrek that was Class II this would work but if you had a Class I 1-1/4 or a 2 inch hitch like the # 76209 we have as a fit for your vehicle it would not fit. We only offer 2 inch hitches for your vehicle like this one so if you have that size we have the part # EBMK4 which you might be interested in. It's got a 4 inch rise and a ball that has interchangeable...
  view full answer...
• Ball Mount Option for 2-inch Receiver on 2022 Volvo V60 Cross Country
  Although we don't have a ball mount that offers the exact rise and length you mention, we offer an option that can get really close. The Curt # C84WR aluminum ball mount offers a 3 inch rise and is 8-1/2 inches long, measured from center hitch pin hole to the center of the hole where the ball attaches. The fact that the ball mount is 1/3 of an inch less in rise and 3-1/2 inches longer than what you're looking for shouldn't cause any problems. The ball mount doesn't include a hitch pin....
  view full answer...
• Fit and Compatibility of European Style Ball Mount with 2 Inch Hitch Ball
  The European style ball mount like # C45592 will work well in place of the standard fixed style ball mount. These are normally only compatible with 1-1/4 inch receiver openings. You would follow the same rise sizes based on your needs. I've attached an article to assist. The biggest difference is the integrated ball and the lack of a drop. The standard fixed style mounts can allow the rise or drop to tow level. The European style is a cleaner look if you only will use the rise position.
  view full answer...
• Recommended Trailer Hitch Receiver, Ball Mount and Wiring For a 2013 Chrysler 200
  With the Curt Trailer Hitch Receiver # C11133 on your 2013 Chrysler 200, Curt recommends using one of the following ball mounts. First is the Curt Class II Drawbar # C45522 with either a 1-7/8" Ball # C40001 or 2" Ball # C40018. Or you can choose one of their Euro Style Ball Mounts with a 1-7/8" # C45591 or 2" # C45592 ball. Whichever you choose you will need a Curt Hitch Pin and Clip # F-4 to secure it in your receiver. You will also need a Vehicle Wiring Harness # C56211 to control...
  view full answer...
• Ball Mount Recommendation for 2012 Chevrolet Cruze With 1-1/4 Inch Trailer Hitch
  We have a couple different style ball mounts that will work with the hitch on your Cruze. For a standard ball mount I recommend the Curt, part # C45522. This ball mount has a 3-7/8 inch rise to help provide a bit more ground clearance. For a 1-7/8 inch hitch ball I recommend part # C40001, and for a 2-inch ball I recommend part # C40018. If you like the looks of the Euro ball mounts I recommend part # C45592 that comes with a 2-inch hitch ball and I recommend part # C45591 for a 1-7/8...
  view full answer...
• 2" Euro Style Ball Mount Hitch With Tallest Rise
  Sorry it took so long to get back with you Rob. I had to investigate this as we do have the 2" # C45592 version of the 1-7/8" # C45591 Euro ball mount. The 1-7/8" you found was incorrectly measured to the top of the ball which is why the rise was different at 6-5/8" than the 2" at 5-1/8" to where the ball is attached to the mount at the bottom. These are also the largest amount of rise we offer in a euro style ball mount.
  view full answer...
• What is the Tongue Weight of the Curt Class II Euro Style Drawbar # S45592
  The maximum tongue weight of the Curt Class II Euro Style Drawbar # S45592 is 350 pounds, and the Gross (maximum) trailer weight is 3,500 pounds. This ball mount is intended to be used on a 1-1/4 inch Class II hitch receiver. Please check your vehicle owners manual, and your hitch specifications to make sure either the tongue weight , or towing weight of your system does not exceed the lowest rated component. I have included a video of this ballmount for your reference.
  view full answer...
• Can a Euro Style Ball Mount Work with a Class I Hitch Receiver
  Currently, all the Euro ball mounts we currently offer are Class II rated. Any Class II rated Euro ball mounts like # C45592 will not fit on Class I trailer hitches unless it's a Curt Class I hitch. The reason is because Class I trailer hitches are tested and rated with specific ball mounts for the hitch and if you use a ball mount not recommended by the manufacturer will void the warranty. I included a informative article about ball mounts for you as well.
  view full answer...
• Fit of Curt Class II Euro Style Ball Mount on Hitch for 2007 Mazda 3
  Your 2007 Mazdaspeed 3 would use a Class I hitch like the Draw-Tite # 24816. The Draw-Tite Class I hitche has a stop punched into the receiver tubes that prevent a Class II accessory like the ball mount you referenced from being slid in far enough for the hitch pin holes from lining up. The # C45592 ball mount would be compatible with a Curt Class I hitch, but unfortunately the # C11386 Class I hitch is compatible with the standard Mazda 3, but not the Mazdaspeed model. If you were wanting...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?