bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 2 Inch
  6. Rise - 0 Inch
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Item # D210
Retail:$104.95
Our Price: $65.07
Trailer Hitch Ball Mount
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing. Great Prices for the best trailer hitch ball mount from CURT. Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs part number D210 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (220)
  • Q & A (0)
  • Photos

CURT Trailer Hitch Ball Mount - D210

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 2 Inch
  • Rise - 0 Inch
  • No Ball
  • 7500 lbs GTW
  • Class III
  • CURT
  • Built-In Dual Hitch
  • Steel Shank - Gloss Black
  • 1 Inch Ball Hole Diameter

Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball
  • 2" Square receiver allows you to carry hitch accessories while you tow
    • Perfect for a bike rack or cargo carrier
  • Sturdy steel is black powder coated for corrosion resistance
  • Hitch pin and clip included - hitch lock sold separately
  • Assembled in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Ball mount
    • Gross towing weight: 7,500 lbs
    • Tongue weight: 750 lbs
    • Ball hole diameter: 1"
    • Drop: 2-1/4" from top of inside of vehicle's hitch opening to top of ball platform
    • Length: 12-1/2" from center of hitch pin hole to center of ball hole
  • Accessory receiver size: 2" x 2"
    • Tongue weight: 750 lbs
    • 7-1/2" Extension from center of hitch pin hole to center of accessory receiver's hitch pin hole
    • 3-9/16" From top of shank to bottom of accessory receiver
  • Pin hole diameters: 5/8"
  • Limited lifetime warranty


Notes:

  • The receiver portion of this unit is designed for hitch-mounted accessories only.
  • Do not use with an additional ball mount to tow a trailer.
  • When mounting an accessory in this receiver, your hitch's tongue weight capacity will be reduced by 50 percent.
  • When using both the ball mount and the receiver the tongue weight capacity is not affected.

Dimensions

How to Measure Drop on Standard Ball Mount

45810 Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs





Customer Satisfaction Score:


Customer Reviews

Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs - D210

Average Customer Rating:  4.7 out of 5 stars   (220 Customer Reviews)

Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.

by:

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

John

1/27/2024

I actually was never able to use it. It was bought to use with my car dolly and bike rack. It turned out the car dolly hitch was in the way of the bike receptor. So I have a brand new, never used receptor.

Etrailer Expert

Mike L.

1/27/2024

@John It sounds like your tow dolly has a surge coupler. If your towed vehicle has a hitch on it, you might be able to carry the bikes on the back of the vehicle depending on which bike rack you have.


by:

Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.



by:

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack.

The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

Ray H.

12/22/2021

Great solution for taking our bikes camping while towing our trailer



by:

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

Debbie

4/22/2022

Excellent. This has been an awesome product.



by:

Once the bike rack and the ball are installed there is only 3" of space for the trailer coupler to attach to the ball. Mine open hitch height is 4 ½”, most others are similar. I cannot think of any trailer/rack combination that this could even be used for. The only way it could be used would be to hitch up the trailer then attach the rack then load the rack over the trailer. Not a good or safe proposition. The only way to detach the trailer would be to unload the rack and then remove it from the mount.

Etrailer Expert

Jenny N.

11/3/2021

Thank you for your feedback. The solution that I have would be to switch to a hitch mounted tow bar that slides into the RV receiver - making sure that the brand matches base plate - and then you could use a hitch adapter like part # RM-077-6. You would also want to make sure that the tow bar was as level as possible.



by:

I have been looking for a light up trailer hitch for a long time. So when I saw this one from etrailer I was very happy. I ordered it and it came in few days.
I also purchased the Curt Multipurpose Ball Mount with 2" Receiver so I could mount the light and still be able to tow with out switching them out. Both Product's are perfect for my needs. Your company is the best and I would definitely recommend Etrailer to others.
Thanks for the great service!



by:

Installed on my 2006 GMC Envoy. Mounted a Bump Step with a self installed camera. Now have full access for adding my trailer as needed.

Stephen E.

6/17/2021

Absolutely still in love with this product!



by:

We use this on a luggage carrier on a Mercury Grand Marquis. My son hauls lawn mowers on the rack and it works great. Very well made



by:

Delivery was fast. Arrived in well packed box. Installed product with no issues at all. Works great and as advertised. Will be towing a travel trailer and needed a connection for a bike rack. When all installed, have plenty of room for placing bikes on bike rack. Really like this product!



by:

Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.



by:

Extremely heavy duty. I will be towing a small aluminum boat behind our camper, and will build a 2 X 2 tube assembly to carry the spare tire on. I needed something to help carry my trailer spare as the hitch on the camper is mounted in such a way that I couldn't hang my spare tire on the bumper. This assures a way to carry the spare as well as tow my fishing boat!
Mike

Mike H.

11/15/2018

A year later, still functioning as designed. I found my hitch pin hole to be slightly off but was able to make it fit. Still hauling the boat and carrier.



by:

This multi hitch receiver fits our needs great. We need to use it for hooking up our pop-camper and for our bike rack. With this receiver, we can now take our bikes with us and not have to mount the bikes on the camper.

The delivery time was fast. We ordered this on a Sunday evening and we received it on Wednesday.

The only thing that we would change is that if the top receiver was about an half inch or more higher, then we would have more than enough clearance for our camper locking part, but there is enough clearance to make this system work.

Stefan

6/14/2013

how many bikes does your bike rack hold? and, have you noticed any problems with turning sharp corners and your bikes coming into contact with your tent trailer?

Patrick B.

6/18/2013

I will send Chad an email about your question. If he has anything to add, it will appear below his original review so keep an eye there. Turning ability is going to vary greatly depending on trailer shape and size, as well as the bike rack used and the shape and size of the bikes themselves. Also remember, this ball mount has a tongue weight capacity of 750 pounds. That means the tongue weight of the trailer, the weight of the bike rack and the weight of the bikes has to be less than 750 pounds or the tongue weight capacity of the vehicles hitch, whichever is less. If you need to carry 4 bikes and have a pretty hefty camper, this may not be the best solution. You can always contact us and let us know what you need to accomplish and we can certainly help you find a solution.


by:

This is a heavy duty receiver it will work great for towing a trailer and having the ability to add a bike rack or cargo carrier. Etrailers coustomer service is outstanding always easy to order and fast shipping with great prices.

Rhk

2/6/2018

The receiver is still working great no problems or issues are all.



by:

Disappointing. Although the manufacturing quality is consistent with Curt's normally high standards, the design leaves everything to be desired. There is not enough clearance above the trailer tongue coupler latch to mount a bike rack. Even if you somehow manage to overcome this, most bike racks won't clear a telescoping jack stand. I should have sent this one back!

Etrailer Expert

Sierra K.

10/14/2021

A very valid issue. It can be done, but you will have to measure carefully to see if this piece will work with your set up. The measurement is 3 and 9 sixteenths of an inch from the top of shank to bottom of the accessory receiver. I recommend getting a bike rack with a rise as this will be the best option for you.



by:

Great product, but did not fit on my 2014 Traverse. The top receiver would rub on my fiberglass bumper of the Traverse and therefore only half the pin hole would line up with the receiver. Plus my 4 bike rack would not fit between car and pop up camper then.

Kelly B.

6/19/2018

Works wonderfully. Use it a lot and couldn’t be happier .



by:

WOW! This piece of gear is built so solid that it is never a worry hooked up to my motorhome, towing a two wheel dolly with a Jetta Diesel Sportwagon and a 4 place bike rack in the upper reciever!

The turn around time between order and delivery was very quick and I was kept aprised of shipping during the entire time.

Thanks!

Anonymous

9/9/2015

It appears that other comments say that in order to remove the car dolly from the ball, you have to remove the bike carrier. This seems to make the whole thing not very good. You do not mention this problem. It appears from the comments, the problem relates to the lack of space between the two receivers



by:

This was just what I was looking for to raise my cargo carrier above the level of my car exhaust and will work for my bike rack as well (not at the same time). It will also allow more room to open the rear lift gate. Product appears to be of high quality but I haven't had a chance to use it yet. Shipping was fast.

Doug T.

7/19/2016

Ive had the receiver about a year now and have used it several times. Its well built and and works for what I purchased it for.



by:

I have never seen a hitch like this one, that I found on etrailer.com. I saw this hitch, and knew it would be perfect for my side by side, and it is. I can hook up to a small trailer, and then unhook, and slide in a feeder in the top receiver, and feed the roads of our hunting lease. This thing is perfect!!

Stan O.

6/15/2019

Perfect!



by:

Maximize fun with this accessory! Made kayak trailer towing with a hitch mount bike rack easy and efficient.

Tampa D.

10/15/2017

Working great. Still going strong.



by:

I originally thought this would work for a pop up camper and adding the bike rack. We have a Thule rack with a Jayco camper. It does not work at all for this set up. However, the product is excellant quality and delivery was prompt. I would recommend it for some other type of set up but not what I described above. I have to send it back.

Tom

9/1/2015

Does this not work due to the turning problem with the bikes coming in contact with the trailer or propane tank? I was thinking of getting this but not if that is the problem.

Etrailer Expert

Rachael H.

9/1/2015

The effectiveness of the Curt Multi-Purpose ball mount # D210 used for both hitch mounted accessories is dependent on the configuration of the trailer, cargo on the trailer, and the hitch mounted accessories. Using this with a bike rack is always interesting and you have to account for the hitch location on the towing vehicle, the configuration of the bikes, and the trailer set up. It is very easy for turning radius to be effected by all of these things. We do have other options such as towing bike racks and trailer mounted bike racks that you might consider. I have provided links to both of these product categories for you to view and see what may work best for your specific application.


by:

Very good service and shipping was on time. Good value for the quality of the ball mount receiver. I tow a car dolly behind my motor home and needed a place to mount my spare tire. Like the fact it's made in the US. very well built.

John H.

2/2/2018

I often dolly tow our vehicle behind our motorhome, but I cannot attach or detach the dolly from the ball mount without removing the bike rack mount receiver first, due to the height and the ball mount . I cannot release the tongue trailer coupler lever. Too tight of clearance. I wish the ball drop was at least 6 inches. This would allow for the dolly tongue trailer coupler lever to come all the way up without contacting the bottom of the bike rack or spare tire carrier receiver.



by:

This worked perfectly for me to haul my small pop up camper and my bike rack. It is very sturdy and easy to install and remove. I usually take it off at the campground so I can get my other supplies out of the back of my SUV without knocking my shins on it.

Deborah

4/11/2019

I still use this and love the ability to take both my camper and bikes this way.



by:

I bought the Curt D210 Multipurpose Ball mount to raise the level of a Kuat platform bike rack with extender for 4 bikes from my Drawtite hitch on a 2007 Toyota Sienna.
Service from eTrailer was superb, the mount is extremely well-built, and it fits my Sienna/hitch like a glove.
We used the rack with 4 road bikes on two trips this week-end and it worked flawlessly; not even a minor scrape through many driveways and turn-ins.
The system does move the rack back a few inches; 50.5" from the bumper, so we needed a red flag on the end (at least in MO). This is the only nit in an otherwise great product.



by:

This product would have been perfect if the manufacturer made the upper accessory hitch higher from the lower ball. As it is, if you have an accessory mounted, you have to remove it to be able to unhitch the trailer since you cannot open the lock. Makes for a very awkward trailer and accessory combo. If you think you can keep your bike rack attached, drop off the trailer and go biking.....think again. You must remove bikes, remove bike rack, disconnect trailer and reinstall bike rack and bikes. Really????? Either the drop for the ball should have been a bigger drop or upper hitch higher.



by:

Bought this product so that we could use the top hitch for our bike rack, while towing our Jeep behind the motor home with the bottom hitch. It has worked out very well, is a very strong, solid hitch. only one issue, barely worth mentioning, but the fit between the tow bar and the bike rack is tight. However, it does work great and there are no real issues with it-very happy!


25
220
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount

  • How to Use 6" Drop Ball Mount and Hitch Bike Rack on 2017 Chevy Tahoe
    I have an alternative solution for you but it will look a little different than the Curt Multipurpose Ball Mount # D210 as the 2" drop you're seeing is pretty standard. To tow your trailer and carry your Thule bike rack I recommend checking out the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-204 which gives you the upper receiver as well as a 5" drop for the lowest receiver. If you have a ball mount with a 1" drop then that's what you'll use for this application, otherwise...
    view full answer...
  • Hitch Adapter For Towing Boat Trailer & Using Bike Rack
    Yes, there is a hitch adapter that allows you to both tow your trailer and use a hitch-mounted bike rack. This is from Curt, and is the following part number: - Curt Multipurpose Ball Mount with 2" Receiver # D210 The # D210 has a 7,500 lb towing capacity and 750 lb tongue weight capacity which should be more than enough for your boat trailer and bike rack. It comes with a pin and clip but if you also need a hitch ball the correct part is 2" Hitch Ball # 40038.
    view full answer...
  • Hitch Adapter to Allowing Towing and Cargo Carrier Installation
    You can use Curt Multipurpose Ball Mount part # D210 to both tow your boat trailer AND use your hitch cargo carrier. Please refer to the linked photo. This item has 500-lbs tongue weight capacity for the receiver and 750-lbs for the ball mount part you'll use to tow. Please note that when mounting an accessory in this receiver, your hitch's tongue weight capacity will be reduced by 50 percent. For a hitch ball you can use # 19260 for a 1-7/8-inch, # 63845 for a 2-inch or # 63847 for a...
    view full answer...
    Image 1 for
  • Fit of Swagman XTC-2 2-Bike Platform Rack # S64670 on 2006 Honda CR-V
    You can confirm compatibility of the Swagman XTC-2 Bike Rack # S64670 with the rear-mounted spare tire on your 2006 Honda CR-V by taking one easy measurement from the hitch pin hole on your hitch to the rear-most edge of the spare tire. The linked article illustrates how to take this measurement. The XTC-2 provides 8-inches of clearance from the hitch pin hole to the closest edge of the first wheel hoop and 15-inches to the upright bar. When unloaded it can fold down to provide rear-of-vehicle...
    view full answer...
    Image 1 for
  • Towing a Pop-Up Camper and Carrying Bikes at the Same Time on a 2015 Dodge Grand Caravan
    First, you would be limited to the 345 pounds tongue weight as specified in the manual for your 2015 Dodge Grand Caravan. Also, the use of a dual receiver will reduce the tongue weight capacity of the hitch by 50 percent from 345 pounds to 172.5 pounds. The combined tongue weight of the trailer and loaded bike rack could then not exceed 172.5 pounds. Since the dry tongue weight of the trailer is 245 pounds you would be over capacity. But what will work is a multipurpose ball mount # D210....
    view full answer...
  • High Rise Ball for Use with D210 Ball Mount on a 2011 Nissan Murano and Viking 2107 Camping Trailer
    It really depends on what the tongue weight is going to be once the trailer is loaded and you have the accessory in the # D210 ball mount and loaded. Given that using the receiver part of the D210 means you are adding tongue weight going with the 2 inch high rise ball, # C40034, is going to be the better option. The D210 ball mount has 2 hitch pin holes; one at the shank and one at the accessory receiver. It takes a 5/8 inch pin such as # PC3 for a regular pin or # 7683 for a locking pin. I...
    view full answer...
  • Available Hitch Adapters for Use with Accessory Carriers While Towing
    The Curt Multipurpose Ball Mount # D210 is not offered with different amounts of drop from the ball platform to the receiver opening. It comes only in this particular size which, importantly, does not reduce your hitch's capacity the way most other adapters do. We do offer Curt's Dual Receiver Tube Adapter # D-192 which provides two 2-inch receiver opening, a top one for use with accessories like bike and cargo carriers and a bottom one that accepts either a tow bar shank or a 2-inch ball...
    view full answer...
  • Recommended Ball Mount with Drop for Towing and Receiver for Other Accessory
    The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 does not come in any other drop. If you need more than the 2 inch drop, then your only option to also have the bike rack receiver is to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise # 325-GH-224. These stacked receivers will allow you to tow as well as use a bike carrier or cargo carrier.
    view full answer...
  • Carrying Bikes While Towing a Pop Up Camper with a 2003 Dodge Ram
    We do have a few different items that you could use to tow the pop up and carry bikes at the same time but the Roadmaster dual receiver # RM-077-2 is only for flat towing (towing a vehicle behind a motor home). The first option you have is to use a towing bike rack. We have several different options for towing bike racks and I have included a link to them for you. The towing racks we carry handle from 2 to 4 bikes depending on the model. Some require an extra long ball mount and will say...
    view full answer...
  • Compatibility of Curt Multipurpose Ball Mount with Hitch Height Adapter
    You can use the Curt # D210 with an adapter, but it will reduce the tongue capacity of your trailer hitch receiver by 50%. If that is acceptable with your combination then I recommend the Malone 2" Dual Purpose Hitch Receiver # MPG544 which will give you 7-1/2 inches of height difference.
    view full answer...
  • How to Carry a Hitch Bike Rack and Tow Trailer at the Same Time
    The first thing to consider for the Malone Dual Hitch Extender # MPG544 is that it will cut the capacities of the hitch it is used on in half. So you will need to determine how much capacity you would need for your bikes/rack and trailer and then compare that to half of the capacity that your vehicle's hitch has. With that being said the product itself has it's own capacities as well. It has a 4,000 max trailer weight and a 400 lb tongue weight capacity. A better option for you might...
    view full answer...
  • Can BikeBase Trailer Tongue Adapter for BikeWing Carrier Work on Ball Mount
    You actually already mentioned the better option in your question, because I do not recommend using the BikeBase Trailer Tongue Adapter for BikeWing Carrier # LC731157 with the BikeWing 2 Bike Carrier for BikeBase or Bump-It Mounting Adapter # LC731137 on an extended length ball mount. The issue is that it is meant to fit 2" to 4" trailer tongues and I can't guarantee that this is going to be secure enough around a ball mount that fits in a 2" receiver. Instead, if you have the necessary...
    view full answer...
  • Recommendation To Reduce Bike Rack Sway When Using Curt Multipurpose Ball Mount # D210
    While the Yakima HoldUp Bike Rack # Y02443 has an anti-rattle setup you will also want to add one to the Curt Multipurpose Ball Mount # D210. The Curt Anti-Rattle Kit # C69HR will fit into the hollow shank on the Multipurpose Ball Mount and allow you to eliminate that play in your receiver.
    view full answer...
  • Will Ball Mount Adapter D210 and Wheel Chair Carrier FHG69ZR Clear Spare of Mazda CX-5
    If you use the # FHG69ZR you will have 8-1/2" from the hitch pin hole. You will not need the extension part # D210 since you only need 4-1/2".
    view full answer...
  • Will Two 30 Inch Wide Kayaks Fit on Lower Deck of Yakima EasyRider Trailer
    I don't believe your two 30 inch wide kayaks will fit on the bottom deck of the Yakima EasyRider Double Decker Trailer # Y08129 . I confirmed through my contact at Yakima that the width of the bottom deck is 54 inches inside to inside of the 2 inch diameter tubing that make up the frame. Because the bottom deck has a height of 21 inches, you would not be able to fit your 30 inch wide kayaks on their side, as you mentioned. You could, however, fit one on the bottom and a second or third...
    view full answer...
    Image 1 for Image 2 for
  • Front Mount Hitch and 4-Bike Rack Recommendations for a 2015 Ford Expedition 4x4
    Curt front mount receiver # C31068 will fit your 2015 Ford Expedition 4x4. According to our data owner's of the 2015 Ford Expedition frequently purchase the Yakima LongHaul # Y02476. Other popular options include the RidgeBack # Y02458 and Hitching Post Pro # TH934XTR. I have linked videos on all of these racks. There are a couple of things to consider when carrying bikes at the front of a vehicle. The bikes could obstruct the front lights on the vehicle and restrict airflow to the motor....
    view full answer...
  • Can the Winch Mount Plate # C31010 be Used with the Multipurpose Ball Mount # D210
    Using the Curt Multipurpose Ball Mount # D210 to tow a motorcycle trailer and the Winch Mount Plate # C31010 to pull the motorcycle onto the trailer is a great idea! The multipurpose ball mount has a Gross Trailer Weight (GTW) rating of 7,500 lbs and a Tongue Weight (TW) rating of 750 lbs. That is a combination of both the ball mount and the 2nd receiver so you will want to make sure that you stay within those weight capacities. I have attached some review videos for you to check out...
    view full answer...
    Image 1 for Image 2 for
  • Will Swagman Original 4 Bike Rack Fit 2005 Chevy Tahoe While Towing 2005 Rockwood Premium Camper
    The solution for the ability to use the Swagman Original 4 Bike Rack # S64675 on your 2005 Chevy Tahoe, and tow your 2005 Rockwood Premium Camper is going to come in the form of a new ball mount. The Curt Multipurpose Ball Mount # D210, can tow a trailer and carry an accessory, such as a bike rack simultaneously, however, this application will depend upon the towing capacity of your vehicle and weight of your trailer. I have attached a short video describing the # D210. To determine if...
    view full answer...
    Image 1 for Image 2 for
  • How to Carry Cargo Carrier While Towing a Trailer
    We do have an easy solution for you to use a cargo carrier and tow at the same time, though you would not be able to put a hitch ball on a cargo carrier because they do not have the strength to tow a trailer. To carry your extra gear while you go camping what you can use is the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 which allows you to use a hitch ball to tow and has a receiver on top for a cargo carrier such as the Curt # C18113. For a...
    view full answer...
    Image 1 for
  • Can Hole Be Drilled In Top Of Curt Multipurpose Ball Mount For Hitch Ball
    There are a couple reasons you cannot drill a hole in the Curt Multipurpose Ball Mount, part # D210. First, you would void any warranty for the mount and probably the accessory you want to use with the ball mounted in the # D210. Secondly, the top receiver opening is not designed for a hitch ball. It is made to be used with an accessory like a cargo carrier or a bike carrier. The bottom hitch ball mount is the only part of the item that is designed to be used with a trailer. I have attached...
    view full answer...
    Image 1 for
  • Height of Vertical Square Tube on RockyMounts BackStage 2 Bike Rack # RKY10002
    From the center of the hitch pin hole to the top of that small vertical post at the end of the shank on the RockyMounts BackStage # RKY10002 there is a distance of 4-3/8 inches. I have attached an image to assist. You can use this measurement to ensure the tailgate on your Tacoma will drop all the way down with the rack attached and the platform swung away to the side. I have included a short video demonstration on this carrier that you can check out as well.
    view full answer...
    Image 1 for
  • Can a Dual Hitch Adapter and Hitch Extender Be Used Together For Towing with a Bike Rack
    I do have an option for you but you cannot use multiple hitch adapters together like the dual hitch adapter part # D-192 and the hitch extender part # C45791 for example. This would create too weak of a connection point and would limit your towing capacity to almost nothing. If you need to tow a trailer and haul a bike rack at the same time a much better option for you would be with the Curt Multipurpose Ball Mount part # D210 or the Jack-It 2 Bike Rack part # LC429756. If you have a bumper...
    view full answer...
  • Can Curt Multipurpose Ball Mount Be Used for Flat Towing a 2020 Chevy Equinox
    Yes, the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 has a weight capacity of 7,500 lbs which is more than enough for the weight of your 2020 Chevy Equinox. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components just let me know and I can make some additional recommendations for you.
    view full answer...
  • Can the Roadmaster Dual Hitch Receiver Adapters Be Used for Towing
    The Roadmaster Dual Hitch Receiver Adapters like the 10" part # RM-077-10 cannot be used for towing per Roadmaster. The only similar option we have for towing is something the Curt Multipurpose Ball Mount with 2" Receiver part # D210 or Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part # 325-GH-214. The Gen-Y option will be better since you can still adjust the height of the hitch ball and there's an offset for clearance.
    view full answer...


< Previous
123. . .24




Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Shane T
Installed by:
Shane T
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.