Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
(2394 reviews)
Price: $42.80
In Stock
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Item # 2753
Our Price: $42.80
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2394)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch Ball Mount - 2753
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 4 Inch
- Rise - 3 Inch
- No Ball
- 7500 lbs GTW
- Class III
- Draw-Tite
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Sturdy steel ball mount with hollow shank measures 9" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Angle-cut end on shank allows for easy installation and removal
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction with a hollow shank
- Black powder coat finish covers a-coat base for superior rust protection
- Hitch pin and clip included
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Length: 9" from center of hitch pin hole to center of ball hole
- 4-1/2" From center of hitch pin hole to closest edge of ball platform
- Rise: 2-3/4" from top of inside of hitch opening
- Drop: 4" from top of inside of hitch opening
- Ball hole diameter: 1"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
2953 Draw-Tite Ball Mount 2-3/4" Rise or 4" Drop - 7,500 lbs
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K - 2753
Average Customer Rating: 4.9 out of 5 stars (2394 Customer Reviews)
Sturdy steel ball mount with hollow shank measures 9" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.by: Matt10/23/2023
Great Customer service I received my product however parts were missing. I contacted them after hours to inform them. And I received Email inquiring what was missing. The very next day I received another e-mail and thy are sending Me the missing parts. mind you this was over a weekend. Great Customer Service.
by: Tom Weatherholt10/03/2014
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done.
Now we can pull our Sunfish Sailboat any where the car will go.
by: Matthew 06/17/2023
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
by: Nick J.04/17/2017
I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount.
The service has been outstanding. This is the place to go.
by: Karry05/15/2020
Purchased to use on my 2020 Yamaha Drive 2 golf cart hitch. I ordered this and an 18” receiver extension. When I placed my online order I received a phone call the next morning asking if was aware that the extension and the receiver hitch were different sizes and would not work together. I was very grateful for the call as I had not realized I had ordered items that would not fit together. Great Customer Service!!!
by: John07/24/2023
The parts worked perfectly. Look forward to using them for real, off road in the Maine north woods.
by: Mark B.04/02/2016
I purchased hitch number 87506 And (2) 2753 ball mounts. The installation was very easy, the entire job took 20 to 30 minutes. I would recommend etrailer.com to anyone looking for a new hitch for their vehicles.
by: William 11/02/2023
Strong and dependable
by: Mike L01/07/2012
Well-made, but take note this mount has a 1" hole. I had intended to get a class III ball mount with 3/4" hole. I had to get a new ball because my old one has a 3/4" shank. And a new wrench because my 12 inch crescent wrench is too small for this new nut.
by: Matt D.04/04/2017
Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.
Matt D.
4/5/2018
Amazing customer service as usual!I love your products, they are heavily road tested and working excellently! I got a friend to buy a trailer hitch too, since it was so easy!
by: Kenneth05/21/2018
You have a great website the product was easy to find and well-defined your price with shipping beat the local prices in my area. The shipping was fast and delivered right to my door. Oh yeah the online tracking of the package was really great. Thank you etrailer.
by: Eric B.08/18/2011
New ball mount/ball and tires/wheels worked like a charm. Everything arrived on time. I'll be getting all my trailer/towing gear from etrailer.com.
Renewed gear hauler set for new adventures. Thanks etrailer!
by: scott09/15/2017
first time I have ever ordered from etrailers,,,,,FANTASTIC SERVICE!!!!!!!!!!!!!!!! FAST FAST SHIPPING!!!!!!!!!!!!!!!! to me 5+ stars all the way around,,, if I ever need anything again and etrailers has it I will order again,,,, could not ask for better,,, I don't get excited about to many companies but etrailers is top notch
by: Pete 01/15/2023
Used it to raise the hitch ball to level out my camping trailer while towing. It works.
by: Matthew07/15/2023
Never used it
by: Juergen07/14/2023
As good as it could get.
by: Kevin05/25/2018
This worked great with my Curt hitch for Subaru Outback 2016. It was a right height for the uhaual trailer as I had to use this as a raise rather than drop. Also, the staff at etrailer was very helpful.
Kevin
7/26/2019
Still doing great!
by: Ray12/18/2014
My F150 had an OEM 4 pin trailer plug and hitch.
The 118242 - 7 pin connector with wiring harness is the ticket. The hardest part of the install was dropping the spare tire. The plugs connect directly to the factory plugs and the harness length is the correct length.
The 3035-P brake controller connector harness was just as easy. Plugs right in to the OEM plug next to the ECM connector and the other end into the brake controller.
The PK12711U-26 - 7 pin bracket and hardware kit fastens directly the OEM bracket that is on the hitch. My truck had an OEM 4 pin trailer towing set up with the hitch. The OEM hitch had the bracket welded on it to attach the 7 pin mounting bracket to it.
These kits make this install very easy and professional looking.
If I have one complaint, the hardware kit to attach the 7 pin connector bracket is set up to fasten the bracket directly to the bumper with 2 - self tapping screws provided in the kit. The kit also includes 4 #12 machine screws with toothed washer nuts to attached the 7 pin connector to the bracket. This is fine if your truck hitch doesn't have an attaching bracket welded to it. The kit should included in it 6 #12 machine screws and nuts along with the 2 self tapping screws. Since my OEM hitch actually had a bracket welded to it to attach the 7 pin bracket to it, I had to use two other #12 screws and nuts to attach the 7 pin bracket to the OEM bracket on the hitch. Not a big deal, just a thought.
It took me about 2 hours, start to finish to install the 7 pin connector, trailer controller, and add the two relays in the OEM relay/fuse box under the hood.
I highly recommend these kits.
by: Virgil 03/08/2023
The hitch works well (as it should!) with no problems.
by: John R.05/09/2018
I chose the Draw tight Max Frame Trailer Hitch for its known quality, i like it comes powder coated to reduce unsightly rust and to keep that fresh look.
I chose the this hitch for my all around light and heavy duty needs.
The Draw Tight Ball Mount is a quality enhancement to this hitch.
I chose the 2" chrome ball for its quality and appearance.
The Curt C55515 wire connector was the best choice for my lighting needs.
by: Videos are spot on!08/12/2013
Purchased Hidden Hitch Class 3, 2" hitch for my 2007 Honda CRV along with wiring harness and ball mount. Not the handiest person in the world but after installing this hitch, my handy-ego has been inflated. The videos on the website are spot on and are a huge resource for installation. Support during the sale and after were much appreciated. This is one of my top five e-commerce experiences. Well done etrailer.com!
by: David B01/25/2014
From all appearances, seems to be a solid mount. I will be using this to tow a duel motorcycle trailer. I needed the specific rise to level out a loaded trailer.
David B.
1/27/2015
This is a follow-up review of the mount. At first it was a little too snug for my Valley Hitch, but that may be the rust built up in the square receiver. So after cleaning it out with a file, and greasing the mount, it slid into the hitch just fine. Ive hauled the bike twice, and I can say that this heavy piece of metal will get the job done nicely. Its heavy, well built, and fits. It accepted a 2 ball with no problems. You wont be dissatisfied - but if you are, then there is probably no pleasing you *joking*
by: Todd C.07/25/2017
I bought a hitch, stinger, ball and wiring harness for my 2004 Toyota Sienna. It was delivered fast, it was the right stuff, and it fit, just like it was supposed to. It really was as easy to install as it looked in your video. The video was immensely helpful too. The video showed me exactly what I needed to know to get my hitch installed correctly and it gave me the confidence to order online and do it myself. The only drawback is a loss of ground clearance but you warned me fair and square up front about that, so I can hardly complain. Thank you, that was a good investment.
by: RDB09/03/2013
Found this ball mount to work as intended but seems to have a little too much play in my Curtis hitch. It moves around in the hitch some and I wish the fit was a little tighter. However, this is not a safety issue or anything just something I noticed. Also not crazy about the fact that this mount is "Made in China" and would rather have purchased a Made in USA ball mount if possible. However, the mount does seem pretty solidly built and will do the intended job.
by: Ralph03/02/2021
Videos extremely helpful.Product was all and even more than expected. The hitch went on without a HITCH, Sorry, couldn't help it. this is how it turned out. would buy again in a heart beat. Thanks
25
2385
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount
- How to Pick Out Correct Rise/Drop Ball Mount When TowingI attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. This is not something that is vehicle specific. It depends on the hitch height and the height of the trailer coupler. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer...
view full answer... - How to Pick Out a Ball Mount for a 2015 Wrangler Unlimited with Factory HitchPicking out the correct ball mount for a hitch is pretty easy, but it does require you to go with one that will allow the trailer to tow as level as possible. To see how to pick out the correct rise/drop ball mount check out the help article I attached. Once you figure out how much rise/drop you would need you would want to check out the other link I attached that will take you to our page that has all of the ball mounts we offer. Once you select the amount of rise/drop you need from...
view full answer... - Does Suspension Sag Need to be Considered When Picking Out Ball Mount Rise DropSometimes suspension sag from the tongue weight of a trailer will be enough that you'd want to compensate by using a ball mount with less drop. Typically though if the sag is excessive you are probably towing more weight than you should be. Since typically it's not possible to get the exact amount of rise/drop from the ball mount that you'd need to totally match the dimensions of the trailer I recommend going with a ball mount that is the next size higher to compensate for that. I attached...
view full answer... - Determining Rise or Drop Needed on Ball Mount for 2012 Honda Pilot Pulling BBQ Trailer In order to determine what drop, if any, is needed on a ball mount to tow your Meadow Creek BBQ trailer level with your Honda Pilot, you will just need to take a quick measurement on both the Pilot and the trailer. Starting on your Honda Pilot with it parked on level ground, take a measurement from the ground to the top of the hitch receiver. Then on the trailer, measure from the ground to the bottom of the coupler. If the measurement you took on the vehicle is greater, you know you need...
view full answer... - Which Ballmount Should I use on my 2 Inch Hitch on My 2006 Toyota SiennaOne of the most important things to keep in mind when towing a trailer is keeping the vehicle and the trailer level. You could choose a ball mount that has the proper rise or drop to keep the trailer level. 17 inches is a good rule of thumb since most trailers have a 17 inch coupler height. Measure from the ground to the top of the receiver opening. Subtract that number from 17. If it is a positive number, you need a ball mount with a rise of that number. If it is a negative number, you...
view full answer... - Can Ball Mount be Used Upside Down to Use in Rise Position A great majority of standard ball mounts are designed so that they can be used in either the drop or rise position. Using a ball mount like the Draw-Tite # 2753 that you were looking at in the rise position is just a matter of turning it upside down like what you mentioned. This does not typically have any effect on the weight capacity or integrity of the ball mount. With that being said, it's hard for me to say for certain that this is the case with your particular ball mount without...
view full answer... - Can I Use a Ball Mount Upside Down to Create a Rise Instead of a DropMost ball mounts, like the Draw-Tite # 2753 can be used in both a rise (upside down) and drop (standard) position. I'm not seeing any Curt ball mount with a part number 45836, but as I mentioned, most ball mounts are designed to be used either way. You will want to measure to determine if you need a rise or drop, so I've linked a helpful article we did on the process so you can determine exactly how much rise/drop you need. I've also linked all of our regular ball mounts that fit in 2"...
view full answer... - Which Ball Mount and Ball for a 1997 Chevy Silverado to Tow a 14 Foot BoatThe size of the ball needed will depend on the trailer coupler. Contact the seller and ask what size ball the coupler requires. It should be stamped or engraved on the coupler. The proper ball mount will depend on the hitch height and the coupler height. Again you would need to contact the seller about the coupler height, but you can measure your hitch height. Basically, you will measure from the ground to the top of the inside of the hitch opening and the seller will measure from the...
view full answer... - How to Pick out the Correct Rise/Drop Ball Mount for a 2012 Jeep Wrangler UnlimitedYou need to take one more measurement to determine what rise/drop ball mount you need. You need to take your trailer to level ground, use the jack to adjust the trailer so that it sits as level as possible and then measure from the bottom lip of the coupler to the ground and then you need to take the difference between that figure and the 21 inches from the top of the coupler to the ground to determine what rise/drop ball mount you need. I attached an FAQ article on how to do this also.
view full answer... - Picking Out Ball Mount Rise/Drop for Ford F-150 Towing CamperIn order to pick out the correct rise/drop ball mount for a towing setup you want to pick the ball mount that will allow your trailer to be towed as level as possible. Since trailers are made with various heights there is no one single ball mount that would work for every application. Instead you will need to take a couple measurements on your trailer and tow vehicle so that you can pick out the correct one for you application. Check out the FAQ article I attached for more info on how...
view full answer... - How Do I Know How High The Ball Should Sit Above the GroundThis will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty trailers are 16-17 inches in coupler height, so we recommend ball mounts on the hitch pages that will give that particular vehicle 16-17 inches on the ball mount. The ball mount that provides 16-17 inches height for a 2008 Hyundai Entourage...
view full answer... - Can the Draw-Tite 2753 be Used in the Rise Position?The Draw-Tite 2 inch ball mount # 2753 can be used in the drop or rise position. When flipped to the rise position, you will get 2 3/4.
view full answer... - How to Pick Out a Ball Mount to Tow a Boat Trailer LevelSounds like you are looking for the correct rise/drop ball mount to allow you to tow your boat trailer level. What you will need to do is measure your trailer from the coupler to the ground when the trailer is level and then measure from the top of the hitch opening to the ground. Whatever the difference is the correct rise/drop you would need. Once you know what you need you will need to check out the link I attached that has all of the ball mounts we carry where you will be able to select...
view full answer... - Dimensions of Draw-Tite Ball Mount 2753I went to our warehouse to measure the Draw-Tite Ball Mount # 2753 for the dimension you asked for. Please refer to the linked photo I prepared for you.
view full answer...
- Can Draw Tite Ball Mount # 2753 be Used in the Rise PositionYes, you can use the ball mount part # 2753 in the rise position (upside down) to gain additional height. When this is in the rise position you have a rise of 2-3/4 inches. For more info on to pick out the correct rise/drop ball mount check out the help article I attached. Basically you want to go with the correct rise/drop that will allow your trailer to sit as level as possible.
view full answer... - Distance from Pin Hole to Rear of Ball Mount 2753The distance you are looking for is 2-3/4 inches.
view full answer...
- Inverting Ball Mount to Work With Taller Trailer Couplers for Level TowingBall mounts like # 2753 can absolutely be inverted to gain height. This is referred to as a rise instead of a drop, meaning there is a measurement from the inside top of the receiver tube on your trailer hitch to the bottom of your trailer coupler when level. That difference will either be a rise or drop and will determine the ball mount needed for you to tow level. I've attached an article to assist further. I've linked the page to all our fixed mount ball mounts as well as the adjustable...
view full answer...
- Right Ball Mount Rise For A 2003 Ford F-150I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height is...
view full answer... - What is the Recommended Ball Mount for a 2006 Nissan Titan LE King Cab 4-Wheel DriveThe recommended ball mount for the 2006 Nissan Titan is Ball Mount, # 2753. However, you could use a different ball mount if you need more rise or drop to tow the trailer. To determine the correct rise or drop you will need, there are 2 easy measurements that need to be made. First, park the truck on level ground. Measure from the ground up to the top of the receiver opening. Next, you will need to have the trailer on level ground. Measure from the ground up to the bottom of the coupler...
view full answer... - Choosing the Correct Ball Mount for a 2008 Toyota Sienna Towing a 2003 Coleman Santa Fe TrailerTo find the correct ball mount for your 2008 Toyota Sienna and 2003 Coleman Santa Fe tent trailer, there are a couple of measurements you will need to take. First, Measure the hitch height from the ground to the top of the receiver opening on the trailer hitch. Make sure your van is parked on level ground. Next, measure the trailer coupler height from the ground to the bottom of the trailers coupler. Again, the measurement is most accurate when on level ground. The trailer will also need...
view full answer... - Proper Size Drop Ballmount for Towing a Boat and Trailer behind a Ford F-250 Super Duty 4x4In order to determine what size drop you need will you to measure two things, the height of the coupler on the trailer and the height of the hitch. To measure the coupler height, you will measure from the ground to the bottom edge of the coupler. Do this on level ground with the trailer level. On the truck, you will measure from the ground to the top of the receiver opening, again with truck level on level ground. If the truck is taller, then you will need a drop equal to the difference....
view full answer... - How to Choose the Correct Ball Mount for 2000 Toyota Sienna Towing Sailboat TrailerChoosing the correct ball mount to tow your boat trailer with your 2000 Sienna is a simple process. They key is to select a ball mount with the rise or drop needed to keep your trailer frame level when it is hitched to the vehicle. A level trailer will handle better. The linked article will be helpful to you. Your Sienna can be fitted with either a 1-1/4-inch Class II or a 2-inch Class III hitch. First you need to confirm which size you have. There should be a safety sticker on the hitch...
view full answer... - Recommended Ball Mount for a 2004 Toyota Sienna LEThe recommended ballmount for your vehicle is part # 2753. This ballmount will place your hitch ball at the most common trailer height for towing with your 2004 Toyota Sienna Van. You may want to double check that this would have the correct height for you, however, because it is just based on the most common trailer height. You may be interested in our information on measuring for the correct ballmount.
view full answer... - Which is Better Slightly Nose High or Nose Low TrailerIn most cases it's a bit safer to go on the slightly lower nose height setting instead of slightly higher since higher can sometimes cause sway. But if the vehicle is going to squat quite a bit from the weight of the trailer then the higher would work better which would be the case with the 4 inch drop ball mount part # 2753.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Randy B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Mike S
Video by:
Kathleen M
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tom W.
11/13/2015
Works great.