bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 3 Inch
  6. Rise - 2 Inch
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

Item # 3593
Our Price: $33.45
You Save: 31%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
In Stock
Draw-Tite Fixed Ball Mount - 3593
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K part number 3593 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1915)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 3593

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 3 Inch
  • Rise - 2 Inch
  • No Ball
  • Class I
  • 2000 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with a solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 6-5/8" From center of hitch pin hole to center of ball hole
  • Rise: 2-1/8" from top of inside of hitch opening
  • Drop: 2-3/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

3593 Draw-Tite Ball Mount 2-1/8" Rise or 2-3/4" Drop - 2,000 lbs

Replaces 6803

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K - 3593

Average Customer Rating:  4.8 out of 5 stars   (1915 Customer Reviews)

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


Worked great to keep the uhaul trailer I towed level even with lowering springs on my 2017 Mazda 3 Touring


Recently purchased this item along with a 2" ball and a spare pin. Quality and fit for all items is "excellent". I have purchased from e-trailer for years and have always been pleased with product quality and the tech support has also been outstanding. Due to an incident during shipping of this order I have learned that the Customer Support from etrailer is also outstanding! I had shipping confirmation with tracking info for replacement items in less than a day from contacting them!


You’re gonna love this! I put the hitch on my Corvette to haul a small luggage trailer on long trips. The hitch works great!


Good quality. Galvanized pain is pretty rusty after one year thiugh.

Working. Galvanized pin has not corroded more. My spelling has improved since last year!
Greg - 12/12/2022


Draw bar fits loose in the receiver. makes a lot of noise on rough roads. could be a little tighter fit.


If it was not for etrailer, I would not have the hitch installed in a expedient manner. [towing company] could not come through with a installation or a hitch. Very grateful etrailer and my hitch in stock


Fit nicely in the hitch receiver and is a good height for my small boat trailer.


This part came with the trailer hitch I purchased.

It was very easy to transfer the ball from my 2" hitch and voila I am now ready to haul my trailer.

am extremely satisfied with the products I purchased. I use theTow Hitch almost daily for my bicycle rack and a trailer I have to tow. The installation was a quick and easy. I have recommended your website to about 20-25 people over the past year. Hopefully you received some business from my recommendations. Thanks for following up. Not all companies take the time.
Jim F - 07/01/2015


Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!


I was completely satisfied and very impressed thoughout my first experience with The website provided exactly the educational material I need to correctly order the products. My order was unexpectedly upgraded for faster shipment, at no cost. The only glitch was the pin and clip were missing. After calling customer service they gave me several options. I bought the pin locally and promptly credit my account for my cost. I'm glad I found and heartily recommend them!


Not very happy with getting a used or returned ball mount from, should not have any rust or dents when I buy a new one. Sending a mail to customer service for a RA#, hopefully they will correct this problem. The wiring harness I order was the other item I ordered and it was in good shape. My experience with them has been up to this point excellent.


Exactly as described, fit perfect. Seen here with ball and receiver.


The product is great quality and perfect fit. I just dont like that the pin hits the rings on the hitch because it is loose enough to move around while driving. Other than that this is great.


Outstanding service and customer support was on point.


Great quality steel and thick strong hot welds. This item was worth the money compared to lower quality products for the same price.


I've only technically used it once but drove with it for over 5,000 miles so I'd say that says something! I used it with my Prius to help tow a nine foot Uhaul trailer with my motorcycle and a bunch of other stuff from my apartment from Tennessee to Massachusetts. Quality product!


Item works well with the hitch and wiri ng!


After a year of usage (each weekend), it looks like new.


Fantastic, Carol. Everything went together beautifully. Just need to register the trailer, get a little practice driving with it and start hauling.


Sending you a pic of my lights I got from you and the hitch with the full wiring system. All works great. Thank you so much. Now it's time to go riding!!


The [online] video of the install made the installation straight forward and simple. The products are as expected.


I bought this as part of the tow package for a Honda Fit. It has the rise I needed to match my trailer. I couldn't be happier with the e-trailer experience.


Super easy to install, fast shipping and great quality products


I bought this hitch a year ago,put it on my Mitsubishi marage I pull 14' alumun boats with it works great love it,and it was easy to in stall


Nice drawbar, good price.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Does the Draw-Tite Class II Ball Mount # 3593 Use a 5/8 Inch Diameter Hitch Pin
    Class I and II accessories like the Draw-Tite Class I Ball Mount you referenced all use a 1/2 inch hitch pin or lock. Class III, IV and V hitches use the thicker 5/8 inch diameter hitch pin or lock. For your Class I accessory, I typically recommend a stainless locking hitch pin, like part # 40106.
    view full answer...
  • Install 3593 draw bar in the up or down position on a 2005 Honda Element
    The orientation your Class I Drawbar, part 3593 will depend on the height of the trailer coupler. With the trailer level, measure from the coupler down to the ground. This is the approximate height you'll need the trailer ball to be. You'll want to install the drawbar so that the trailer ball is as close to this height as possible. Due to the fairly low bumper height of the Element, you'll probably need to install it in the 'up' position.
    view full answer...
  • Dimensions of the Shank of the Draw-Tite Drawbar for 1-1/4" Hitch # 3593
    The shank of the Draw-Tite Drawbar for 1-1/4" Hitch # 3593 measures 1-1/4 inches tall by 1-1/4 inches wide.
    view full answer...
    Image 1 for
  • Why Can't Class II Accessories Be Used with Class I Trailer Hitch Receiver
    Both Class I and Class II trailer hitches have the same 1-1/4 inch receiever opening, however a Class II hitch will have higher towing and tongue weight capacities. The primary issue with using a Class II accessory in a Class I hitch is that many Class I hitch receivers actually have a built-in tab/stopper inside the receiver that physically prevent a Class II accessory from fitting. Trailer hitch manufacturers do this in order to keep a Class I hitch from being overloaded, since a Class...
    view full answer...
  • How to Pick Out the Correct Ball Mount
    I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height is...
    view full answer...
  • How to Pick Out the Correct Ball Mount for 2015 Honda Civic
    The best way to determine which amount of rise or drop you need from a ball mount (in order to keep your hitched trailer level for the best handling) is to measure as outlined in the linked article. Since the same wheel size could have more than one tire size on it that does not give you the best method for choosing a ball mount. For the Class I hitch on your 2015 Honda Civic you can refer to the linked page to see all ball mounts.
    view full answer...
  • Are Ball Mounts Sold Separately from Trailer Hitches
    Sounds like you are looking for a ball mount. We carry quite a few of them actually. But when you buy one you want to go with one that allows the trailer to be towed as level as possible. I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will...
    view full answer...
  • Is There a Standard Required Clearance for Ball Mount to Vehicle Bumper
    There really isn't a specific range for what you are asking about. You basically want the trailer to be able to move as you turn without interfering with the vehicle bumper. Normally that's not an issue and what people end up more concerned with is the correct rise drop. Having the hitch opening recessed 3 inches is pretty standard for towing applications. Ball mounts typically stick out around 9 inches or so which gives the trailer plenty of clearance to pivot around.
    view full answer...
  • How To Choose Correct Ball Mount for 1-1/4" Trailer Hitch
    In order to choose the correct ball mount you need to measure the distance from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler while the trailer is level. If the vehicle is higher than the trailer you need a drop but if it's lower you'll need a rise. I have attached a full list of ball mount options below for a 1-1/4" trailer hitch.
    view full answer...
  • What is the Correct 1-7/8 Inch Diameter Ball for Draw-Tite Ball Mount # 3593
    We have many different 1-7/8 inch diameter balls. The recommended 1-7/8 inch ball for ball mount # 3593 is # 19256. Any ball that has a 3/4 inch diameter shank will fit.
    view full answer...
  • Difference in Class I and Class II Ball Mounts and Can They Interchange
    The correct ball mount or draw bar for the Hidden Hitch Class I 1-1/4 Inch Hitch, part # 24812, on your 2010 Toyota Matrix will be Draw-Tite Ball Mount, part # 3593. When towing with a Class I or Class II trailer hitch, the ball mount that is recommended by the hitch manufacturer should be used. All Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer will void the warranty. A...
    view full answer...
  • Recommended Ball Mount for the Draw-Tite # 24866 on a 2011 Volkswagen Jetta Sportwagen
    Actually Draw-Tite states in the installation instructions for the Draw-Tite # 24866 that the recommended ball mount should only be used in the rise position. So you are totally fine to do so. The recommended ball mount is Sportframe Drawbar # 3593 that has a 2-1/8 inch rise or a 2-3/4 inch drop. Its important that you only use this ball mount in the rise position otherwise you will void the warranty.
    view full answer...
    Image 1 for
  • Is Ball Mount Included With Hidden Hitch # 60823 for a 2005 Subaru Impreza
    The Hidden Hitch Trailer Receiver # 60823 (no longer available) does come with a drawbar, pin and clip. The drawbar that is included is the Sportframe # 3593. In this application, the drawbar can only be used in the rise mode. The rise mode is 2-1/8 inches. If you need a ball to mount on your drawbar, I have attached a link with all the 3/4 inch shank diameter choices. Check your owners manual for weight capacity limitations.
    view full answer...
  • Compatibility of Draw-Tite Class I Trailer Hitch w/ 2016 Honda Accord Touring Model w/ Dual Exhaust
    The Draw-Tite Class I trailer hitch, part # 24899 is indeed compatible with your 2016 Honda Accord Touring model with dual exhaust. Minor modifications will be necessary to install the hitch. In some cases, the access hole in the frame member might need to be enlarged slightly to allow the installation hardware to be fished through the frame. The heat shields are temporarily removed, then reattached, the shield might need to be bent or trimmed to clear the fasteners. If the vehicle has...
    view full answer...
  • Availability of Replacement End Caps for Thule Square Roof Rack Load Bars
    We do indeed offer replacement end caps for the square load bars used by your Thule Crossroad roof rack. You'd want part # 853-3593, and the caps are sold individually.
    view full answer...
  • What is the Correct Ball Mount for a Draw-Tite Trailer hitch # 24815
    The Draw-Tite Trailer Hitch, # 24815, is a Class I trailer hitch. Only Class I accessories will fit. The reason is that Class I trailer hitches have a built in stop that will only allow Class I accessories so you do not accidentally overload the hitch. You can see this stop in the 4th picture on the product page. Also, with any Class I or II trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer otherwise you will void the warranty. The correct ball mount...
    view full answer...
  • Replacement End Caps For Thule Rectangular Roof Rack load Bars
    The replacement end caps you need for your Thule rectangular load bars is part # 853-3593. This comes with 1 cap and will fit well on your Thule roof rack.
    view full answer...
  • Do Thule Load Bars Come with End Caps
    If you were purchasing an entire roof system from Thule the end caps typically come with the foot pack. If you are purchasing just the load bars and need end caps I recommend # 853-3593 which has a quantity of 1 Thule End Cap.
    view full answer...
  • Replacement Endcap Option For Thule Short-Roof Adapter Kit
    The Thule Short-Roof Adapter has been discontinued but we previously confirmed the cap for Thule roof rack square load bars # 853-3593 works well as a replacement. I was able to fit the 853-3593 over the end of the short-roof adapter bar.
    view full answer...
    Image 1 for Image 2 for
  • Why Won't My 1-1/4 inch Ball Mount Slide Into a Class I Hitch
    It sounds like you have a Class I hitch and are trying to use a Class II drawbar with it. Class I hitches are designed to do exactly what you are trying to do, prevent the use of a Class II accessory by not letting the holes line up. This is to prevent overloading the hitch. I attached an FAQ on hitch classifications for you to check out also. The correct ball mount to use with your Draw Tite Hitch part # 24915 would be the Sportframe Draw Bar part # 3593.
    view full answer...
  • My Draw Bar Will Not Fit All the Way Inside My Draw-Tite Hitch 24812 on my Pontiac Vibe
    The stop inside the hitch is not to force customers to purchase certain brand products, but to ensure that a Class II draw bar is not inserted into a Class I hitch. The Draw-Tite hitch you have, part # 24812, is a Class I hitch so if the welded stop inside is preventing the draw bar from going all the way in, you have a Class II drawbar. The recommended draw bar for this particular hitch is part # 3593. This draw bar will fit your hitch and will be at the proper height for trailers that...
    view full answer...
  • Trailer is not Level When Towing with Recommended Drawbar
    The instructions (see link below) state that the drawbar must be used in the rise position only, for your Pontiac Vibe. Drawbar 3593 has a rise of 2-1/8 inches, and only the drawbar recommended for a Class I hitch should be used. The manufacturer tests for crash safety on Class I and Class II hitches and their recommendation should be followed. If your drawbar is in the correct position and the trailer is still not level you may need to haul that particular trailer with another vehicle....
    view full answer...
  • Which Drawbar and Ball Should be used on a 2006 Honda CR-V for a 2,000 Gross Trailer Weight
    Distance from hitch pin hole to clear the spare tire usually only applies to bike carriers. It does not matter in the case of a draw bar or ball mount. The recommended ball mount for your vehicle is part # 3593 that you have referenced. It has a 2000 pound gross trailer weight capacity and a 200 tongue weight capacity and uses a ball with a 3/4 diameter shank. You could use part # 19258, which has a 3500 pound gross trailer weight capacity. Double check the owner manual for your Honda...
    view full answer...
  • The Correct Drawbar for a 2003 Volkswagen Jetta with a Class I Hitch
    For your 2003 VW Jetta, the drawbar, # 36051, will not work because Class II accessories are designed with a feature that keeps them from being used in a lower class hitch. So you will need to use the Sportframe Drawbar, # 3593, instead. I pulled all the recommended hitches for your vehicle and this is the drawbar that is recommended as the proper fit for those hitches. There is not, necessarily, a recommended length. The limiting factor is the gross trailer weight and tongue weight capacity....
    view full answer...

< Previous
123. . .31

Do you have a question about this Trailer Hitch Ball Mount?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Chris R
Video Edited:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.