bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 0 Inch
  6. Rise - 3 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Item # 36063
lowest price pledge
Retail:$54.89
Our Price: $23.89
You Save: 56%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
Trailer Hitch Ball Mount 36063 - Steel Shank - Gloss Black - Draw-Tite
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs part number 36063 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1702)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 36063

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 0 Inch
  • Rise - 3 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 11-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 3-18" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36063 Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

Replaces 90005

Replaces 90007




California residents: click here



Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs - 36063

Average Customer Rating:  4.8 out of 5 stars   (1702 Customer Reviews)

Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

- 36063
by:

Product: I was a little bit surprised that this drawbar has some play when installed into the hitch. I would expect it slide in and have no space for wiggling side to side. Packaging: I would give it 2 stars but don't want to affect the product itself. Package came destroyed, drawbar is scratched (or rather "one corner is sanded to bare metal"). This is how package looked when received. You guys selling heavy pieces, can you invest in packing a little bit more? p.s. The hitch I received a week early had the same problem - one side sticking out of the box, scratched.


Comments
The drawbar and the receiver tube on your hitch like any mass-produced product, has to be within a certain size tolerance. No 1-1/4 inch receiver tubes inside dimension will measure exactly 1-1/4 inches, it will always be a little bit larger. The shank of any accessory designed to fit a 1-1/4 inch receiver wont measure exactly 1-1/4 inches. If the receiver and shank were both exactly 1-1/4 inches, they would not fit together. Occasionally, youll get a hitch mounted accessory with a shank thats on the small side of tolerance used in a receiver thats on the large end of tolerance. When that happens, there will be more movement of the drawbar in the hitch. There are various anti-rattle devices available such as # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$31.79
that will tighten up the connection between the drawbar/hitch accessory and the receiver tube.
-- Etrailer Expert Mike L - 05/18/2018


- 36063
by:

Installation is self explanatory, in my case it puts the ball at the same height it was on my truck. I'm only using this for pulling a small utility trailer that I put my dirt bike in, but the construction (weld) felt solid enough for larger pulls like a small camper.


Comments
Ive pulled my dirt bike trailer all over the state with zero issues. No problems neither on or off road. Considering the lead foot I get sometimes, no signs of wear or abuse have shown, it has remained stable from day one. Thanks
Daniel - 02/18/2019



- 36063
by:

I ordered a few products at one time and, before ordering, had some questions about compatibility. My questions were answered quickly and accurately. Products arrived more quickly than expected and were in good shape (no damage). I found the product videos very helpful when shopping. My ATV isn't here yet so I can't comment on fitment.


Comments
Have had a chance to use this a handful of times. Fits my ATV perfectly and is strong. Useful for a number of pulling applications.
Steven D - 05/05/2021


- 36063
by:

The hitch was easy to install and looked as if it should have been there all along. I used it to pull my motorcycle trailer, and absolutely no problems. Alas, I sold the 2013 Beetle back to VW in January of this year over the "DieselGate" situation. I had gotten hold of a 2003 Beetle Diesel to replace it, and got a hitch from eTrailer for it. (The 2013 hitch would not work on the 2003.) Same story. Easy. And the installation videos eTrailer makes available lets you know just what and how everything needs to be done.


Comments
The entire installation on my 2003 Beetle TDI is still performing as it should. eTrailer knows towing, and always has helpful information.
NM_Bob - 05/03/2018



- 36063
by:

It looks to have been used or found on the side of a road very disappointed


Comments
I am sorry to hear about any inconvenience with your order and have sent your review and pictures to our customer service team for direct follow-up with you.
-- Etrailer Expert Laura E - 07/10/2017


- 36063
by:

Purchased Trailer Hitch, Auto Trailer Light Kit, and new Trailer LED lights kit. All shipped Quickly, installed easily, work perfectly. 5 Stars for eTrailer



- 36063
by:

My Lincoln Town Car hitch requires a extra-long and rather rare Towing attachment. etrailer is the only one I could find on the internet that had one and at a good price. Workout perfectly.



- 36063
by:

Good price and service. It pulls stuff with power and authority. When cars behind me see this drawbar, they honk their horns in awe and surprise. Families pull their children in tight as my drawbar thunders by.



- 36063
by:

wow your service it amazing since i have been ordering from you..!! thank you so much..!! tony t... ;-)



- 36063
by:

Product is exactly as expected! Service is also exceptional, same as on past orders. I wasn't in a rush, but etrailer got the order out the same day, and because I'm within 1 day UPS ground shipping in Kansas City, the order arrived the next day. I really appreciate the great communication from etrailer, I received an email to let me know it was shipped the same day the order was received, and received a second email today to confirm that it had been delivered. Very helpful! I can't recommend etrailer highly enough!



- 36063
by:

Excellent service great price and quality product. Would by from etrailer.com anytime. Thanks, Ralph



- 36063
by:

This product is exactly what I expected and what I needed. This company did a fantastic job and got it to me very fast, BRAVO!



- 36063
by:

I received the hitch on time and in great shape!



- 36063
by:

One year on, it is still in great shape. The paint is holding up fine in heavy use. No quality problems.



- 36063
by:

Fit on the hitch as described.



- 36063
by:

Product was as stated and good quality. Thank You etrailer.



- 36063
by:

The product came as advertised and worked fine. The price was also reasonable.



- 36063
by:

Everything I needed, mechanic installed it in about an hour.



- 36063
by:

It came in good condition.



- 36063
by:

Mine did not look new, it had a lot of chips in it , and the finish was very dull.



- 36063
by:

Very quick delivery and exactly what I needed. Thanks!!!!!!



- 36063
by:

Perfect fit.



- 36063
by:

Easy to order part arrive quicker than expected very good quality



- 36063
by:

Excellent product, quick shipping service. I would use this company again without reservations.



- 36063
by:


28
1722
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch Ball Mount



  • What Vehicles Does Trailer Hitch # 36116 and Drawbar # 36063 Fit
    The Draw-Tite Trailer Hitch, # 36116, (installation instructions linked below) will fit the following vehicles: 1983 to 1991 Mercury Colony Park Wagon 1992 to 2011 Ford Crown Victoria 1983 to 2011 Mercury Grand Marquis 1983 to 1991 Mercury Grand Marquis Wagon 1983 to 1991 Ford LTD Country Squire Wagon 1983 to 1991 Ford LTD Crown Victoria 1983 to 1991 Ford LTD Crown Victoria Wagon 1979 to 1982 Ford LTD Wagon 2003 to 2004 Mercury Marauder 1980 to 1983 Lincoln Mark VI 1979 to 1982 Mercury...
    view full answer...
  • Ball Mount with at Least 3 Inches of Drop that is Longer Than 9-3/8 Inches Long for Old Rat Trike
    Ball mount # 36063 does have to be used in the rise position only. How about ball mount # 3592. It has a drop of 2-3/4 inches and measures 9-3/4 inches from the center of the hitch pin hole to the center of the ball hole. It is designed for Class I or II hitches. This is going to be the best option out of the ball mounts we carry.
    view full answer...
  • Draw-Tite Class II Hitch for 1996 Cadillac De Ville Does Not Come with Drawbar or Pin and Clip
    I am sorry, but the Draw-Tite Class II Frame Trailer Hitch Receiver Hitch, part # 36185, for your 1996 Cadillac De Ville does not include a ball mount or pin & clip. You can purchase those parts separately. I recommend the Class II Drawbar 3-1/8 inch Rise (Kit), part # 36063. This kit includes the ball mount and pin & clip recommended for towing a trailer with your Cadillac.
    view full answer...
  • What is the recommended Draw Bar for a 1999 Cadillac DeVille
    The manufacturer recommended drawbar for your Cadillac DeVille is part number 36063 which has a 3-1/8 inch rise and 11-3/4 inch long distance between the center of the hitch pin hole and the center of the ball mount hole. When towing with a class II trailer hitch, the ball mount that is recommended by the manufacturer should be used. All class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer...
    view full answer...
  • Drawbar included with Hidden hitch, part # 90139
    The drawbar that is included with Hidden Hitch, part # 90139 (no longer available), is Class II Drawbar 3-1/8" Rise (Kit), part # 36063. It fits 1-1/4 inch, Class II hitch receivers.
    view full answer...
  • How To Find Correct Ball Mount for Towing with a Toyota Rav4
    In order to choose the correct ball mount height for a Toyota Rav4 you simply need to measure from the ground to the top of the inside edge of the receiver tube and then from the ground to the bottom of the coupler on the trailer while level. This will be different for every vehicle and trailer combo so the best option to ensure you can tow level and with multiple trailers if you ever wish to switch would be to go with the etrailer Ball Mount Kit for 2" Hitches part # 989900 since it has...
    view full answer...
  • Ball Mount Recommendation For Class ll Hitch On 1996 Buick Estate Wagon
    One of the drawbars we offer for a Class ll hitch that fits a 1996 Buick Estate Wagon hitch is the Draw-Tite Ball Mount, part # 36063. This ball mount fits a 1-1/4 inch receiver opening and uses a hitch ball that has a 3/4 inch shank. This ball mount has a 3-1/8 inch rise from the top of the receiver tube. The hitch ball I recommend is part # 19258. This is a 2 inch ball with a 3/4 inch shank diameter.
    view full answer...
  • Correct Ball Mount for a 1995 Buick Riviera
    I am not sure which draw bar you have, but the recommended draw bar for your vehicle and trailer hitch is the Class II Draw bar 3-1/8 inch Rise, part # 36061. None of the hitches or draw bars we carry have tapered receivers or shanks, so the only thing I can think of is that you have a Class 1 hitch and a Class 2 draw bar which are not compatible with each other even though they have the same 1-1/4 inch by 1-1/4 inch shank. . The Class 2 shank will not fit in a Class 1 hitch, but a class...
    view full answer...
  • Recommended Ball Mount Compatible With 1998 Cadillac DeVille
    Based on the confirmed fit trailer hitch receivers we have for your 1998 Cadillac DeVille, I assume you have a 1-1/4 inch receiver opening. Because of how far back this sits from the bumper, I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs # 36063. With this ball mount you can use # 19258 for a 2 inch hitch ball or # 19257 for a 1-7/8 inch ball.
    view full answer...
  • Ball Mount Recommendation for Draw Tite Hitch for a 1996 Lincoln Town Car
    The hitch part # 36116 is a Class II hitch that has the part # 36063 as the recommended ball mount which has a 3-1/8 inch rise. If there was a Class II hitch compatible ball mount that had a 3-1/4 inch rise available you could use it, but we do not carry one. That being said, the difference between the two sizes would not be hardly noticeable so the 3-1/8 should work just fine. For a 2 inch ball you would need part # 19258, or for a 1-7/8 inch ball part # 19257.
    view full answer...
  • Do I Modify My Auto Level Housing to Install a Draw-Tite Hitch # 36309 on my 2000 Buick Le Sabre
    In order to install this Draw-Tite Receiver Hitch, part # 36309, you will need to remove the rearmost fastener which secures the load leveling control housing to the frame rail and discard it. You will then trim the load leveling control housing around where the previously removed fastener was. See the picture to the right for further clarification. Some other items you may need: Draw Bar # 36063 Ball # 19258 or 19256 Trailer Wiring # 119176KIT
    view full answer...
    Image 1 for
  • Can a Trailer Hitch Be Installed on a 1997 Mercury Sable by a Mechanic
    I would recommend the Draw-Tite Class II 1-1/4 Inch Hitch, part # 36252, for your 1997 Mercury Sable. This hitch has a maximum gross trailer weight capacity of 3,500 lbs and a tongue weight capacity of 300 lbs. You will need the recommended ball mount, part # 36063. You will also need a hitch ball like the Tow Ready 2 Inch Hitch Ball, part # 19258, and the Tow Ready T-One Wiring Harness, part # 118333. I am including a link to the installation instructions on the wiring harness. Anybody...
    view full answer...
  • Using a 36078 Class II Drop Drawbar as a Rise Instead of a Drop
    The drawbar you mentioned is not intended to be used in the rise position and would only create a 3-1/2 inch rise. We do carry a 5 inch and a 3-1/8 inch rise drawbar (see links below) that will fit the Class II hitch. These drawbars all have a tongue weight capacity of 300 lbs and a towing capacity of 3500 lbs. Keep in mind that if you need a significantly higher or lower drawbar to tow (you are not able to use the manufacturer's recommended drawbar for the hitch), you will void the manufacturer's...
    view full answer...
  • Hitch Recommendation for a 1998 Oldsmobile 88
    The Draw-Tite Trailer Hitch Receiver # 36211 that you referenced is confirmed to fit your 1998 Oldsmobile 88. This hitch has capacities of 3,500 total trailer weight plus 300 lbs tongue weight, your trailer will need to weight less than this. Also, you need to check the owners manual of your vehicle as well to determine the capacities listed for your vehicle and be sure not to exceed the lower of the two ratings. To complete your towing setup you may also be interested in the following...
    view full answer...
  • Is Drilling Involved when Installing Trailer Hitch # 36116 on a 1983 to 2010 Ford Crown Victoria
    For the 1983 to 2010 Ford Crown Victoria, Sedan and Wagon, you will need to drill 4 holes in the frame in order to install Draw-Tite Trailer Hitch, # 36116. I have included a link to the installation details. Step 4 in the instructions explains the required drilling. I have also included a link to a video showing installation on a similar vehicle, a 1992 Lincoln Town Car. The main difference on the Town Car and other vehicles compatible with this hitch is that on the Town Car there are...
    view full answer...
  • Recommended Equipment for Towing a Small Trailer with a Chrysler LHS
    We offer a Class II hitch, part number 36170, available for your vehicle. The hitch is rated to tow 3,500 lbs and has a tongue weight capacity of 300 lbs. I would recommend checking the gross weight of the trailer, with it fully loaded to find your tongue weight. If your weight is under 300 lbs, then this hitch will accommodate your trailer application. You will also need the ballmount, part # 36063 and the 2 inch Ball, part # 19258, as well as a pin and clip, part # PC2 or a hitch lock,...
    view full answer...
  • Recommend Hitch and Wiring For 1997 Toyota Tacoma
    I do have an option for you but the Draw-Tite Trailer Hitch Receiver part # 36116 is designed to fit certain years of the Lincoln Town Cars and Mercury Grand Marquis so it will not fit the Toyota. The part # 36063 the sticker references is a ball mount that is recommended for use with the hitch determined by Draw-Tite. For a 1997 Toyota Tacoma, I recommend Curt Trailer Hitch Receiver part # 13013 which is a custom fit design for the Toyota Tacoma that will not require any drilling to...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring for a 1988 Buick Estate Wagon
    First, if you have a 1988 Buick Century wagon then there are no trailer hitches that will fit it. But if you have the full size Buick Estate Wagon then trailer hitch # 36105 will fit. We haven't had the chance to install this hitch on a vehicle to take that measurement. But take a look at the diagram showing the hitch's position under the vehicle. It is recessed a good amount. The picture is also in the instructions I have linked. There is no welding required for installation. The hitch...
    view full answer...
    Image 1 for
  • What is the Difference Between 2008 Buick Lucerne Special and Super Models and Regular Models
    The Super and Special are trim and packages that the 2008 Buick Lucerne could come with. The CXL Special Edition will have a chrome grille and chrome clad 17 inch wheels and a badge on the trunk that indicates it is a Special model. The Super can be identified by a rear spoiler. If you have a Special or Super model, hitch # 36502 will fit. For a different model 2008 Buick Lucerne the comparable Draw-Tite hitch is # 36309. I have included a link to the installation instructions and a video...
    view full answer...
  • Available Trailer Hitch Receiver Sizes for 2000 Buick LaSabre
    All of the trailer hitches we carry that have been determined to fit the 2000 Buick LeSabre are Class II hitches and have a 1-1/4 inch hitch receiver. We do not have a hitch for the 2000 LeSabre that has a 2 inch hitch receiver. If you are looking to do some light towing, I recommend the Draw-Tite Class II Frame Receiver Hitch # 36309. The recommended ball mount for this trailer hitch is # 36063. You will also want a hitch ball, like a 2 inch hitch ball # 19258 or a 1-7/8 inch hitch ball...
    view full answer...
  • Replacement Installation Hardware for Draw-Tite # 36105 on 1985 Chevy Caprice Station Wagon
    We can certainly help you with that! You'll need the replacement hardware kit, part # RHK. Follow the link I've provided. When you're on the product page, type the part number # 36105 and the manufacturer Draw-Tite into the proper fields. Hitch installation hardware is a one-time use item only. If you'll be using the hitch for towing, you'll want to check your owner's manual to determine the towing capacity. You'll need the following to complete your towing system: 4 pole trailer connector,...
    view full answer...
    Image 1 for
  • Trailer Hitch for 1998 Cadillac DeVille to Allow Towing Small Utility Trailer
    We do offer one trailer hitch receiver for your 1998 Cadillac DeVille, part # 36267 from Draw-Tite. This is a 1-1/4-inch Class II hitch with 300-lb tongue weight and 3500-lb towing capacities. You will want to check your DeVille's owner's manual or speak to a local Cadillac dealership to confirm that the vehicle is rated to tow a trailer. It is possible that the hitch and car have different capacities, and when this is the case the lower-rated item determines the overall capacity for the...
    view full answer...
  • Hitch, Ball Mount and Wiring Recommendation For 1997 Lincoln Continental
    I do have an option for your 1997 Lincoln Continental but the Curt Trailer Hitch Receiver part # C12130 is a fit for 1981 - 2011 Lincoln Town Cars not Continentals. I recommend Draw-Tite Class II Frame Receiver Hitch part # 36252 for the 1997 Lincoln Continental. I have attached an installation video for your reference. There is not a custom fit wiring harness available for the Lincoln Continental so you would need Curt Powered Tail Light Converter part # C59236 which would need to...
    view full answer...
  • Does Draw Tite Trailer Hitch 41116 Fit 1999 Mercury Grand Marquis
    The Draw Tite hitch part # 41116 is a confirmed fit for your 1996 Mercury Grand Marquis. For a ball mount you'd need the part # 36063, for a 1-7/8 inch hitch ball part # 19257, for 2 inch ball part # 19258, then for trailer wiring # 119190KIT.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.