1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 6 Inch
  6. Rise - 5 Inch
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs

Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs

lowest price pledge
Retail:$42.70
Our Price: $24.62
You Save: 42%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 10 lbs
Quantity: 
Draw-Tite Steel Shank - Gloss Black Trailer Hitch Ball Mount - 40346
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs part number 40346 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1836)
  • Q & A (34)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 6 Inch
  • Rise - 5 Inch
  • Draw-Tite
  • No Ball
  • Class III
  • 6000 lbs GTW
  • Steel Shank - Gloss Black
  • 1 Inch Ball Hole Diameter

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Sturdy steel construction with hollow shank
  • Both drop and rise positions available to ensure level towing
  • Hitch pin and clip or hitch lock sold separately


Specs:

  • Application: 2" x 2" trailer hitch receiver
  • Gross towing weight: 6,000 lbs
  • Tongue weight: 600 lbs
  • Length: 10-1/4" from center of hitch pin hole to center of ball hole
  • Rise: 4-3/4" from top of inside of hitch opening
  • Drop: 6" from top of inside of hitch opening
  • Ball hole diameter: 1"


How to Measure Drop on Standard Ball Mount


40346 Ball Mount 4-3/4" Rise or 6" Drop, 6,000 lbs

Replaces 80240

Item # 40346




California residents: click here



Customer Reviews

Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs - 40346

Average Customer Rating:  4.9 out of 5 stars   (1836 Customer Reviews)

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole.

- 40346
by:

Products came sooner than expected with it being so close to the holiday. Everything has gone together as expected. I included a photo of where the hitch height is on our 2013 Dodge Grand Caravan which I would have appreciated while deciding on which products to purchase. Thank you!



- 40346
by:

I have never been so happy to have bought this product. Its has gone way past my expectations. Easy to install, and has held up and pull so much more then I ever thought it could. The staff at etrailer has been awesome, the service has been awesome, I will continue to do business here.



- 40346
by:

This high quality ball mount is perfect for my 2019 GMC Terrain. Thanks for the great products and wonderful service.



- 40346
by:

Not a problem with the product. Just between the receiver and the trailer hitch assembly, there wasn't any pin to hold the pieces together. I was hoping it was all complete, but now I have to find the pin the holds everything together when towing. Not an end of world, but an annoyance.


Comments
The pin and clip and not included with this ball mount. They are available separately as part # PC3
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
$12.15
.
-- Etrailer Expert Victoria B - 09/26/2019


- 40346
by:

Appears well made and hopefully work as advertised



- 40346
by:

Good to buy a product that's EXACTLY as described. The 4 3/4" rise is what I needed. I previously bought a "Curt" mount from a local store and the actual rise was a full 1/2" different than what the decal on the mount stated. This DrawTite has clean looking welds and a nice finish. Angled cut makes inserting smooth. I appreciate that the large sticky decal peels off cleanly.



- 40346
by:

Well made, nice coating and fits perfectly of course. I have a tall truck and needed to match my OHV hauler and this was a perfect choice and is the perfect height. I appreciate that etrailer always has what I need - always the perfect product.



- 40346
by:

etrailer selection, prices and customer service are always excellent...and this order reminded me that speedy shipping is another of their strengths. Thanks!



- 40346
by:

I had trouble finding a 4-3/4" rise at any local stores. Etrailer shipped it out in a reasonable amount of time. Using this to pull a small trailer behind a Toyota Sienna and needed the 4-3/4" rise. Packaging needs some thought. 2" ball was coming out the side of the box when it was received.



- 40346
by:

Ball mount and ball came in only 3 days after placing order. Product is in perfect condition & I will use it this Monday towing my boat.


Comments
Trailer hitch has performed like a champ. Towed my boat flawlessly. The installation was very easy to do. Only problem was the dirt in the cars threads which had to be tapped out but that was not the hitch installations problem.
John H - 10/22/2017



- 40346
by:

Well made and looks good



- 40346
by:



- 40346
by:



- 40346
by:



- 40346
by:

Ashley was able to help us order what we needed for our hitch quickly and easily. Also available on the website was a link that showed how to install the hitch and attach the wiring.



- 40346
by:



- 40346
by:



- 40346
by:



- 40346
by:

Parts were shipped right away. The order was exactly what I ordered and good quality. When I need additional parts this IS where I will shop. Thanks for the great commutation and customer service.



- 40346
by:

It raises the back of my 2014 Sedona and allows me to pull my Casita camper higher off the ground. Glad I bought it.



- 40346
by:

Came as described. Finish was good.



- 40346
by:

Just got it installed so haven’t pulled with it yet but seems to be perfect from what I can tell.



- 40346
by:

I have to take it to someone to screw the ball on to get it to the appropriate torque but..... seems very solid!!!! I wish it could have come already put together.



- 40346
by:

Nice product...



- 40346
by:

This product is well built. Exactly what I ordered.


27
1871
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch Ball Mount

  • 6 inch Drop Ball Mount Recommendation for Truck Towing Motorcycle Trailer
    When determining how much drop you need from a ball mount you have to measure from the top of the hitch opening to the ground and then from the bottom of the coupler lip on the trailer down to the ground when it is sitting level. So since you measured from the bottom of the 2 inch hitch and got 17 inches that would mean you need a drop of 6 inches actually. For a ball mount you then would want the part # 40346 which has a 6 inch drop. For a hitch ball with a 2 inch diameter you...
    view full answer...
  • Ball Mount Storage Bag for Hidden Hitch Ball Mount with 6 Inch Drop
    The etrailer.com Ball Mount Bag # ETBMB is 16-1/4" long x 5-1/4" high x 4" wide and may fit your Hidden Hitch 80240 our part # 40346 ball mount at an angle. Another option is the Rightline Gear Custom Roll Bar Storage Bag - Jeep - Water-Resistant - Black # RL100J70-B which is large enough to handle your ball mount and is durable.
    view full answer...
    Image 1 for
  • What Size Hitch Pin for Use with Ball Mount # 40346
    A standard 5/8 inch pin like the part # PC3 would be what you would need with the Draw Tite ball mount part # 40346.
    view full answer...
  • Is Fascia Trimming Required to Install Draw-Tite Hitch on 2020 Honda Passport
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 can be installed on your 2020 Honda Passport by simply raising the hitch into position and tightening the included hardware to the specs listed in the installation instructions. This is one of the easiest and simplest hitch installations and does not require any modifications to the fascia, bumper or any other part of your vehicle. To complete the trailer towing package on your 2020 Passport, you may consider the following products: T-One...
    view full answer...
    Image 1 for
  • Installation Difficulty and Hitch Recommendation for 2021 Toyota RAV4
    Of the hitches available for the 2021 Toyota RAV4, I'd recommend the US made Curt class III hitch, part # C13416. The installation wouldn't be too difficult for somebody with average mechanical ability, you can take a look at the installation video which should give you a pretty good idea if this is something you'd feel comfortable attempting yourself. The only specialty tools needed would be a torque wrench and a 19mm crow foot adapter (the video will show the adapter, in case you've...
    view full answer...
  • Trailer Hitch Recommendation for 2012 Toyota Sienna
    I've linked you to the available hitch part numbers for your 2012 Sienna. May I make a Recommendation? I'd personally choose a Class III hitch like the Curt part # C13343. 2 Inch Class III hitches have a much better selection of hitch mounted accessories available than the smaller 1-1/4 inch Class II hitches do. The game changer about the # C13343 is that it uses a concealed cross tube, which means that the only portion of the hitch that's visible is the receiver tube and the safety...
    view full answer...
    Image 1 for
  • Recommended Ball Mounts For Curt RockerBall Shock Absorbing Ball
    I may have an option for you but the Curt RockerBall Shock Absorbing 2" Hitch Ball part # C40047 is a 2" ball with a 1" diameter shank so this will not work for your ball mount with a 5/8" hole. If you would like to switch out your ball mount you can use the RockerBall with a ball mount with a 1" diameter I have attached a couple of ball mounts below that will work with the Rockerball since I am not sure how much rise/drop you need in a ball mount. Draw-Tite Ball Mount for 2" Hitches...
    view full answer...
  • Trailer Hitch and Install Recommendation for 2016 BMW X3
    We don't have any specific recommendations, but any trusted mechanic would usually be able to complete a hitch installation without difficulty. However, a mostly-concealed design hitch like the Draw-Tite # 76226 you'd looked at would require that the bumper and bumper cover which is a pretty extensive process. Because of that, your local body shop would be a better choice as they'd be more familiar with removing and reinstalling parts like bumper covers/fascia. If you'll be using the...
    view full answer...
  • Class III Trailer Hitch Fit for 2018 Jeep Renegade Altitude
    The Curt class III hitch you'd looked at, part # C13269 fits all models of the 2018 Jeep Renegade as confirmed by Curt, so it'll work perfectly on your Renegade Altitude. If you'll be towing with the hitch, you'll need a few additional items to complete your towing system. For a trailer wiring harness, use # 118651. For a ball mount, use # 40346 along with a # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 19261 or # 63845 for a 2 inch.
    view full answer...
  • Ball Mount With 5 Inches of Rise for Trailer Hitch on 2019 Chevy Equinox
    Since the Class III Draw-Tite hitch # 76419 on your 2019 Chevy Equinox measures 11 inches to the top of the receiver and the bottom of your utility trailer's coupler is 16 inches you will need a ball mount that gives you 5 inches of rise. For that you can use the Draw-Tite Ball Mount # 40346, which will fit your 2 inch receiver and has plenty of capacity at 6,000 lbs. You will also need Pin and Clip # PC3 or Trailer Hitch Lock # e98880 to secure the ball mount to your hitch as well as...
    view full answer...
  • 2 Inch Hitch for 2013 Ford Fusion
    We do indeed offer a hitch for the 2013 Fusion, part # 306-X7239. The only install video we have shows the hitch being installed on a 2020 Ford Fusion, but EcoHitch does confirm that the # 306-X7239 hitch fits all models of the 2013-2016 Fusion, and all models of the 2013-2020 Fusion except for the sport. If you'll be towing with the hitch, you'll need a trailer wiring harness like # 118574, a ball mount like part # 40346, a # PC3 hitch pin and for a 1-7/8 inch trailer ball, part # 19261...
    view full answer...
  • Does The Curt RockerBall Shock Absorbing Hitch Ball Have More Of A Rise Compared To A Standard Ball
    You are correct the Curt RockerBall Shock Absorbing 2" Hitch Ball - 1" Diameter Shank - Chrome - 7.5K part # C40047 does have a rise. On a standard hitch ball it sits flush with the ball mount but the RockerBall has the included height of the shock absorber which makes it about 1-1/2" taller than a standard ball. This is important when choosing a ball mount. You want to choose a ball mount that has an additional 2" of drop if your ball mount is in the drop position. For example if your...
    view full answer...
    Image 1 for
  • Ball Mount Recommendation for 2016 Toyota RAV4 Hybrid
    The Draw-Tite # 2753 will give you just shy of 3 inches of rise. The next step up from that as far as rise goes would be the Curt # D-28 which would give you 4 inches. You'd also need a # PC3 hitch pin. For almost 5 inches of rise, use the Draw-Tite # 40346 along with the same hitch pin. Keep in mind that the hitch and the trailer coupler height do not need to be exactly the same, but the closer you can get, the better. If you can get within 1-2 inches, that's plenty close enough.
    view full answer...
  • Correct Trailer Hitch and Trailer Wiring Harness for 2017 Nissan Quest
    According to Curt, the # C13900 is a fit for the Nissan Frontier and the small Nissan Pickup that predated it but they don't list the Quest as a fit. I'd recommend using the Curt # C13078 Class III hitch which is specifically designed for your 2017 Quest. If you'll be using the hitch for towing purposes, you'll also need the # C56342 trailer wiring harness, a ball mount like # 40346 (use in the rise position) and a 1-7/8 inch ball like # 19261 or a 2 inch ball like # C40004. You'd also...
    view full answer...
  • Trailer Hitch and Towing Accessories for 2017 Ford Flex with Dual Exhaust
    For the dual exhaust-equipped Flex, you'll want to use the Curt Class III, part # C13110, as the # 13551 isn't a fit for models with a dual exhaust. If you'll be towing with your hitch, you'll also need a trailer wiring harness like part # C55774, a ball mount like # 40346 used in the rise position, a pin and clip like # PC3 and a trailer ball. For a 1-7/8 inch ball, use # 19261 or # 63845 for a 2 inch ball.
    view full answer...
  • Ball Mount and Hitch Balls for 2018 Ford Escape Titanium
    The distance from the center of the hitch pin hole to the anti-rattle device on the Solid Tow # DTSTBM6600 is right at 2", so it's not going to work if you've got only 1-1/2"; this also does not come with a 1-7/8" hitch ball. For these reasons it's really not going to be a good choice. What I recommend doing is using a regular rise/drop ball mount with a 6" drop like the Draw-Tite # 40346, which fits in a 2" receiver and uses hitch balls with 1" shank diameters. For a 1-7/8" hitch ball...
    view full answer...
  • Recommended Hitch and Towing Equipment for Towing Small Enclosed Trailer with 2017 Jeep Cherokee
    The Curt Class III part # C13171 would work great for towing a small enclosed trailer, as long as its fully loaded weight is less than the 2000 lb towing capacity of your Cherokee. The hitch itself has a higher capacity, but you'll be limited by the capacity of the lowest rated component, which is the vehicle in this case. No fascia trimming is required and as you can see in the linked video, installation is pretty simple and straightforward. You'll also need a trailer wiring harness...
    view full answer...
  • Towing Recommendations for a 2015 Honda Odyssey
    First lets start with a hitch for your vehicle. I recommend the Draw-Tite # 75270 because it has a high towing capacity compared to the Curt Hitch. Next the wiring harness that is custom fit for your 2015 Honda Odyssey is # 118521 this will provide you with a 4-pole connector at the back of your tow vehicle. Don't worry that your vehicle isn't already prewired for a brake controller, I have a solution for that too. Our # ETBC7 kit includes everything you need to install an electric...
    view full answer...
    Image 1 for
  • Installation Photo of EcoHitch Hidden Hitch on 2012 Ford Focus Electric
    I have attached a photo of the EcoHitch Hidden 2 Inch Trailer Hitch Receiver installed on a 2012 Ford Focus Electric. The hitch is designed to fit 2012 through 2014 Ford Focus Electric vehicles. If you're in the market for a bike rack, the Swagman XTC-2 2-Bike Platform Rack # S64670 would pair up nicely with the EcoHitch receiver. If instead, you plan on towing a small trailer, you may consider the following parts to complete your towing package: # 118549 - 4-Pole Flat Trailer...
    view full answer...
    Image 1 for
  • Which Trailer Hitch Ball Moints are Compatible With Reese Friction Bar Sway-Control Bracket?
    The bracket you are referencing # RP26003 is designed for the more traditional fixed mount style ball mounts like # 40346 for example. I've attached an article to help you with the rise or drop needed for your application. If you want to use an adjustable ball mount there are more limited options for sway bar compatibility. The MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs # MT70067, the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4"...
    view full answer...
  • Trailer Hitch Fit for 2021 Toyota Rav4 Hybrid
    According to Curt, their # CK66KR Class II hitch is compatible with all models of the 2021 Toyota RAV4, including the hybrid model. Instead of the Class II, might I make a suggestion? If you went with the Class III # C13416 hitch which has the more prevalent 2 inch receiver opening, you'll have a much larger selection of hitch mounted accessories such as bike racks or cargo carriers to choose from. Usually, there isn't much of a price differential if any separating the two, so unless...
    view full answer...
  • Hitch Fit for a 2021 Toyota Sienna
    The Curt # C22UR Class III hitch is a fit for the 2021 Toyota Sienna, as confirmed by Curt. If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # TK69FR, a ball mount like part # 40346, a # PC3 hitch pin and either a # 19261 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
    view full answer...
  • Trailer Hitch Fit for 2000 Dodge Grand Caravan Sport
    According to Draw-Tite, their # 75119 Class III hitch is a fit for all models of the 2000 Dodge Grand Caravan, including the Sport model. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118334, a ball mount like # 40346, a # PC3 hitch pin and a # 19261 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball. I've linked to a product install video for the hitch.
    view full answer...
  • Trailer Hitch and Towing Accessories for 2020 Subaru Ascent
    According to Draw-Tite, their # 76253 Class III receiver hitch is a fit for all models of the 2020 Subaru Ascent. The receiver tube exits the rear of the vehicle through the bumper, for better ground clearance at the rear than a standard mount hitch that would have the hitch receiver sitting below the rear bumper fascia. If you'll be using the hitch for towing, you'll need a trailer wiring harness, a ball mount and the correctly sized trailer ball. For a wiring harness, use # 118790....
    view full answer...
  • Ball Mount with 6 inch Drop and 1-7/8 inch Hitch Ball
    For a 6 inch drop ball mount that would fit the 2 inch hitch of your 2019 Subaru Ascent we have the Draw Tite part # 40346 and then for a 1-7/8 inch hitch ball you'd want the part # 19261 and you'd be set. The Curt ball mount does not have the smaller ball size available for it since the ball hole is larger.
    view full answer...
  • 50mm Ball and Getting Lights to Work on Altera Strada DL3 Bike Rack on 2016 Chrysler Town & Country
    We do have 50mm hitch ball # EH53C-C so all you will need now is a ball mount that fits the 2 inch receiver on your 2016 Chrysler Town & Country. Since the trailer hitches are close to the ground on vans I recommend a ball mount with some rise in it such as Draw-Tite ball mount # 40346. The electrical is a little more complicated but the good news is that you don't have to have lights on a bike rack in the US. But if you want them to function then an adapter will need to be made since...
    view full answer...
  • Hitch and Trailer Wiring Recommendation for 2020 Toyota RAV4 Adventure Series
    Both the Curt # C13416 and the Draw-Tite # 76201 are confirmed fits for all models of the 2020 Toyota RAV4. Both hitches are a concealed design, which means that the crossbar of the hitch is hidden behind the bumper, the only visible portion is the receiver tube and the safety chain hoops. Both hitches are very similar in appearance with the Draw-Tite model having a slightly higher capacity. If the extra capacity isn't a consideration, I'd choose the Curt model because the hitch is manufactured...
    view full answer...
  • Will Curt C13416 Class III Hitch Affect Hands-Free Liftgate and Parking Sensors on 2020 Toyota RAV4
    According to Curt, the hitch may interfere with the power liftgate function or possibly cause it not to function all together. However, we have not received any product reviews stating it completely shut down that feature. It's much more likely that the receiver tube will cause the liftgate sensor under the center of the bumper not to function, but if you try to either side, they'll work just fine. We've received over 600 customer reviews for the Curt and Draw-Tite Class II and III hitches...
    view full answer...
  • Adjustable Ball Mount For A 2014 Mercedes Benz GLK
    To get your ball to the height you are wanting on your 2014 Mercedes Benz GLK I recommend using an adjustable mount. I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black Item # BWTS10038B. It provides a 1-7/8" ball and a 2" ball for different trailer couplers and fits 2" receivers. It is going to provide a 5-1/2" rise so it is going to provide the adjustability you are looking for. I recommend making sure the trailer doesn't exceed the weight capacity...
    view full answer...
  • Does Exhaust Need Lowering To Install Curt Class III C13416 on 2020 Toyota RAV4
    Per the instructions, it's not necessary to lower the exhaust to install the Curt # C13416. This being said, you might find it easier to get the hitch into place and insert the fasteners if the exhaust is out of the way. This is why our technician chose to do so. If you'll be using the hitch for towing a trailer, you'll also need a # 118801 wiring harness, a # 40346 ball mount in the rise position, and a # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 19261 or # 63845 for a 2 inch. I've...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Zach D
Video by:
Zach D
Employee Brent H
Test Fit:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.