Is this right For you? Product Expert Alexander C says:
Yes, if you:
Need a monster ball mount with very high capacity, even when using the 2" ball
Tow a heavy-duty equipment trailer with a lunette ring
Own a 2-1/2" receiver hitch accessory and want to use it with your 3" hitch
No, if you:
Need extra peace of mind with locking hitch pins
Are distracted by noisy rattling, because the receivers have some play
Don't want to spend a premium cost
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs. Lowest Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 6" Drop/Rise - 32K part number 325-GH-1723 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (47)
Q & A (0)
Related Parts
Photos
Why etrailer?
Gen-Y Hitch Trailer Hitch Ball Mount
- 325-GH-1723
Fits 3 Inch Hitch
Adjustable Ball Mount
Drop - 6 Inch
Rise - 6 Inch
2 Inch Ball
2-5/16 Inch Ball
Two Balls
32000 lbs GTW
Stacked Receivers
Built-In Pintle Hook
Gen-Y Hitch
Steel Shank - Gray
Steel Ball
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.
Features:
Adjustable ball mount lets you hook up your trailer to your tow vehicle
Shank slides into hitch receiver on your vehicle
2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
2 Pins included to secure accessories to shank
Adjustable height lets you tow trailers of different heights with the same vehicle
Drop ball mount lower or raise it higher to match your application
Heavy-duty steel construction
Zinc primer and powder coat finishes resist corrosion
Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
SAE J684 certified
Made in the USA
Specs:
Application: 3" x 3" trailer hitch receivers
Built-in receiver size: 3" x 3"
Maximum drop: 6"
Maximum rise: 6"
2" Ball capacity:
Gross towing weight: 16,000 lbs
Maximum tongue weight: 1,500 lbs
2-5/16" Ball capacity:
Gross towing weight: 32,000 lbs
Maximum tongue weight: 3,500 lbs
Overall height: 9-3/4"
Total length from center of 5/8" pin hole with included ball mount installed: 12"
Total length from center of 5/8" pin hole without ball mount installed: 9"
Distance from center of 5/8" pin hole to first weld on shank: 3"
Distance from center of 5/8" pin hole to base of receivers: 4-5/8"
Hitch pin hole diameters: 5/8" and 3/4"
Distance between pin holes: 1"
Accessory pin hole diameter: 3/4"
Multiple Stacked Receivers for Easy Adjustment
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
GH-1723 GenY Hitch Mega Drop Adjustable Versa Ball Mount with Pintle Lock for 3" Hitch Receivers - 6" Drop/Rise - 32,000 lbs
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 6" Drop/Rise - 32K - 325-GH-1723
Average Customer Rating: 4.7 out of 5 stars (47 Customer Reviews)
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.
by: 3rd Time Gen Y User03/29/2022
Great product. Always the best. This is the 3rd one we have purchased for our heavy trucks. My hitch came all scratched and banged up from poor shipping. Not a positive for a $xxx hitch. Will be looking for a different distributer than etrailer in the future for these products. Great product, 5/5, however etrailer did no favors on this product.1279025
Comments
I see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference.
Great service fast shipping delivery as promised1270395
by: Jimmy 11/10/2021
This is a very stout item. I can't imagine anything would ever go wrong with it. Unless you don't lock it.1199004
by: James 12/31/2019
well built and easy to change heights for different trailers. eliminated a lot of play from reducing down to use 2" hitches in the 3" receiver734997
by: James 03/13/2020
Good customer service - prompt shipping and easy ordering.
Hitch appears very durable and fits in ford 250 3” receiver. 765979
by: Anthony 09/23/2020
The hitch came quickly, it's top quality and super heavy duty. Thanks!887395
by: Ray g04/20/2018
I am extremely happy with the hitch and lock. Both components are solid as I expected498639
by: Howard04/20/2021
Great customer service 1016353
by: James 12/06/2020
919964
by: Sean04/30/2022
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Awesome heavy duty hitch, ordered some locking pins for just incase someone felt strong enough to to take it.1292202
by: Paul10/25/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Great product. Very stout, but also very heavy. Only complaint is the weight, particularly because I am not a full time trailer “tower” so I install/remove frequently. Definitely peace of mind in terms of not having to worry about ball mount issues with 2500#+ tongue weight.1187440
by: Charles 09/13/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
The hitch is great except for one problem. The ramp in front of the 2 5/16 ball that is for a pintle hitch is cracking at the weld.1151609
by: John07/17/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Everyone was helpful to order and help towards getting an account set up for the business.1097097
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This hitch has been used with both balls in every height position. Hitch is durable and high quality. It has not been off my truck since I purchased it and is used frequently to tow 10-20K trailers. 749840
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
So far so good not rusty yet … I own 2 of them very solid and feels just right1314000
by: Mick02/19/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Been towing with this hitch for a year now. It’s the best hitch I’ve ever owned. The longest I’ve ever kept the same hitch. Easy to switch heights, strength, it’s bulletproof. I’ve dropped a loaded dump trailer onto the ball after not getting it lined up correctly. The weight would have bent any other hitch. This Gen-Y laughed at it.961240
by: Angela04/17/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This review is for the install only, as i have not towed with the hitch yet... Well, getting the hitch into the receiver was a major pain in the rear. So much powder coating made it very difficult to insert. I hade to use a 5000lbs tie down ratchet, and it took about 45 minutes to complete the task. Not happy with that portion at all.1014190
by: Les03/03/2022
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This thing is a beast! Well built! 1268481
by: Vincent 10/17/2021
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Fantastic!0 1181989
by: James02/16/2022
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Excellent quality. Above and beyond what I expected.1263472
by: Dayron03/03/2018
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
the product looks great. Everything was as described and it looks very durable. The color looks better in person than in the photos.480717
The Gen-Y Adjustable Ball Mount part # 325-GH-1723 does fit the 3 inch hitch size of your 2014 Dynamax DX3. Based on the weight and towing capacity of your RV you would not need weight distribution for your trailer. view full answer...
The price for the Gen-Y Adjustable Ball Mount with 6 inch drop for the three inch hitch size # 325-GH-1723 is available at the link below. view full answer...
I recommend the # EQ64FR Equal-i-zer Weight Distribution System w/ 4-Point Sway Control. This has a tongue weight rating of 1,200-1,600 lbs and gross towing weight of 16,000 lbs. It has a 2-1/2" shank so it will fit the receiver opening on your # 325-GH-1723 Gen-Y Adjustable 2-Ball Mount.
Ideally you want your actual tongue weight to fall toward the middle of the range of the weight distribution system you use. At 1,300 lbs this will work well for your setup.
The Equal-i-zer uses integrated... view full answer...
Due to the high capacity of the 3 inch receiver, an adapter that would allow you to use a 3 inch hitch accessory in a 2-1/2 inch receiver hitch doesn't exist. By necessity, an adapter that lets you use a higher rated accessory in a lower rated hitch would need to extend out, away from the hitch. The leverage that this would apply with the accessory in place with the weight bearing down on it would damage the hitch and/or the hitch attachment points to the vehicle.
If you have two different... view full answer...
The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 6" Drop/Rise - 32K # 325-GH-1723 is a great option for your 2019 Ford F-250 with 3 inch receiver. This ball mount will use 2-1/2 inch receivers, so the Bulldog Hitch Receiver Lock # BD580412, or the Weigh Safe Hitch Receiver Lock # WS05 will work. view full answer...
The lock set you need for the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch # 325-GH-1723 to lock the hitch pin, the ball mount pin, and the pintle lip is the part # 34061080-D for the hitch pin and part # 34061573-D for the rest of the ball mount. These are all keyed alike so all locks would use the same key. view full answer...
I have some great options that check all the boxes; 3" hitch, 2-5/16" hitch ball, 6" drop, and made in the USA. I have attached these for you below but bear in mind they are all adjustable.
180 Hitch 2-Ball Mount w/ Stainless Balls part # LTB6-3
BulletProof Hitches Adjustable 2-Ball Mount part # HD306
B&W Tow & Stow 2-Ball Mount part # BWTS30040B
Gen-Y Adjustable 2-Ball Mount part # 325-GH-1723
I recommend the B&W Tow & Stow due to the stowaway feature. view full answer...
Highest quality trailer hitch ball mount for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.
Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
Most detailed, accurate trailer hitch ball mount information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.
Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.