etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
(1282 reviews)
Price: $112.06
In Stock
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Item # EBMK4
Our Price: $112.06
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (1282)
- Q & A (0)
- Videos (2)
- Photos
etrailer Trailer Hitch Ball Mount - EBMK4
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 4 Inch
- Rise - 3 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- 6000 lbs GTW
- Class III
- etrailer
- Ball Mount Kit
- Steel Shank - Gloss Black
- Steel Ball
etrailer 4" Drop Ball Mount Kit
- Works with 2" x 2" trailer hitch receivers (class III)
- Kit Includes:
- (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
- Capacity: 7,500 lbs GTW and 750 lbs TW
- (1) Convert-A-Ball Interchangeable Ball System with a 1-7/8" and 2" hitch ball (# 901B)
- Ball capacity: 10,000 lbs GTW
- (1) Pin and Clip (# PC3)
- (1) etrailer Ball Mount Bag (# ETBMB)
- (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
2953w/PC3 + 901B etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Video of etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Ball Mount Kit Review
Today we're going to be taking a look at the E-Trailer Ball Mount Kit. This is part number EBMK4. Now the parts that make up our kit will start with the ball mount itself. This is from Draw-Tite, part number is 2753. Again, for the two inch by two inch receiver tube opening. You've got a four inch drop where you can rotate it over into a two and 3/4 inch inaudible 00:00:23 to help you cover different bases.
This is a hollow shank so we're not so worried about it being really heavy. Then a 3/4 inch wide ball mount platform, and the whole for the ball shank itself, that's going to be one inch. Now, the ball is part number 901B. This is from Convertible. It's a really nice system that allows you without having to remove this nut, and get everything torqued back down properly, to switch between an inch and 7/8 and a two inch ball. Of course, it's got a one inch bolt diameter that comes down through the shank.
Nut, we're going to have a lock washer, and there's also a cotter pin, just for an additional level of safety. This is the inch and 7/8 ball that we've got installed. We'll just push on the pin that goes through it there. Pull that through. It's going to allow us to remove the inch and 7/8 inch ball and then place on the two inch ball. It's really easy flip of that pin. Now, as far as customer reviews go, one of the concerns I had about this ball mount was ease of use.
Is it eventually going to corrode It's single piece machine steel which is nice. It's going to be heavy duty but also it's nickel coated. We're not going to really have to worry about corrosion. Looking through the customer reviews, people are talking about years of good service out of it, without the corrosion issues that some of the changeable style balls are kind of known for. At each end, there's a small rubber O ring there. That helps to seal that up and it prevents that moisture and dirt from getting in there eventually leading to corrosion.
Something I really liked about the balls themselves is that you can't really remove the pin. You're not going to be able to pull it out so the pin is going to stay with the ball itself. You're not going to worry about losing one of these and having to rely on one coming out of the other ball and switching them back and forth. The pins are going to stay in there. With the bag, this is part number ETBMB and it's going to allow us to keep all of our components stored in there. Part number PC3 here, it's a 5/8 diameter pin and clip. That's what we secure it to our hitch with. Keep everything in one convenient location. We can store this out of the way and we'll have it every time we need it. Now the ball itself is rated for 10,000 pounds whether you're using the inch and 7/8 or two inch variety. The ball mount itself is rated for 750 pounds of tongue weight. That's the maximum downward force we can put down on top of the ball. It's 7,500 pound gross trailer weight ready. That's going to be the total weight of your trailer and anything that you load up. You'll want to go off the 7,500 pounds as a maximum, unless your car is rated lower. Check the owner's manual. See what your car's tow rating is, and follow which ever of those numbers would be the lowest. The ball mount will be ideal for lots of different applications. Your medium and light duty trucks, SUVs, vans, cars. The only real requirement you're going to have is a two inch by two inch receiver tube opening on your hitch. To get it in the vehicle, we're going to take the ball mount out, slide that into the receiver tube opening. We'll line up this pin hole with the pinhole in our hitch. Slide through our provided pin. Secure it with the clip. Now we'll be ready to grab whichever ball we need at the time. The two inch and the inch and 7/8 are going to be very, very common sizes. These are the two you're going to run across a lot. Unless you get into the larger trailers where the two and 5/16 inch might come in more handy. If we've got our inch and 7/8 trailer, just pull our pin, line it up with the hole, and then be able to put that right back on. Now, I recommend the detent side. You'll see it on the pin here, there's going to be a small dimple in there. That's the side you always push from. I recommend when you install it on your ball mount, to have that facing outward. That way it's very easy to access and very easy to push when it would come time for you to switch over to your other ball. The materials that get of course our ball mount. We've got heavy duty steel. It'd be a black, powder coat finish but the important part is the ball and where it goes inside the coupler. They kind of wear on them side to side and that nickel coating is really going to help prevent the rust and stuff like that that we typically get between our coupler and our ball. Then, if any of the rust or grease does get on the ball mount itself, once we have it in the bag, we don't have to worry about getting it all over the carpet inside of our vehicle. Let's hook up our trailer and we'll be able to hit the road. That'll complete our look at the E-Trailer inch and 7/8 and two inch ball mount kit, part number EBMK4.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs - EBMK4
Average Customer Rating: 4.8 out of 5 stars (1282 Customer Reviews)
by: Vic 07/18/2023
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
by: Rick 06/24/2023
This item gave me the extra clearance that I needed when using my cargo carrier. Etrailer has everything that I needed for new trailer hitch.
by: Allan W.03/22/2015
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
by: Upstate Nick06/08/2023
100% satisfied.
by: Bradley 06/15/2023
Exactly what I needed to pull my little boat, perfectly level, behind a 2022 Grand Cherokee.
by: Darren Benari08/09/2017
WOW! What can I say? Easiest install ever! I called ahead of time and spoke with Katie about what I needed. She confirmed what I wanted would work with my van.
I'm in the shipping business. The bar arrived in mint condition in a double wall box with the accessories boxed separately. After removing the hardware, reading the instructions and watching their video online, I went to work. The whole thing took less than 20 mins and I did not have to remove the exhaust. I actually used it to help hold the bar up. It took longer to remove the mud guard and rear body molding than to install.
It is heavy, weighing in at about 65lbs but I did not even have to use a jack on the van. I'm very happy with my purchase and can now put bikes on the back of the van rather than in the van. I can tow our Cub Scout trailer and hall my sons football teams gear with the optional rear carrying racks.
I also love the fact that the bar hides about 6" behind the bumper preventing injuries to the shins. The price was cheap and the install a breeze.
Comments
Love em
Darren B - 08/10/2018by: Kenny10/03/2022
Does a great job and I really like how easy it is to change the balls.
by: deb6283709/26/2011
I bought this product to make my new hitch versatile. Even though presently I am only towing 600 pounds of small sailboat and trailer, I wanted the capacity to tow heavier stuff should the need arise. Therefore, I bought a hitch rated at 3500 pounds, and this ball mount to fit both standard sizes of ball.
The two balls are easy to swap, as advertised, requiring just a screwdriver to push out the pin holding the ball to the shank.
Important tip: The nut holding the ball shank to the mount is enormous, something like 36MM, and I traveled from store to store trying to find a truck-lug socket to fit it, UNTIL I thought to mention that I was installing a trailer hitch ball. Duh. The clerk directed me to the TRAILER HITCH BALL WRENCH, a two-ended box wrench about 18" long. Problem solved for $12. Maybe the instructions could have mentioned this tool?
by: Jesse R.04/10/2011
All in one kit is Very convenient.
but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer.
Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
by: Chuck04/06/2015
I've never towed anything or had a car with a hitch so i was going in blind. Did a little research and this looked like a good plan. After purchasing, and installing I have to say that this company it excellent to deal with. Online store was set up great with essentially putting together what I needed automatically for a complete solution. I purchased it and it arrived with very good tracking i might add. So I took the laptop out and set in in the back of the Cr-v and hit play on the install video. Stop go, stop go and an hour later the hitch was installed. Took a nice break because my arms were tired...no floor jack as recommended. Next I set off to install the wiring harness and same experience. The video was dead on. It's not a difficult job at all but does require some patience and ability to swear now and then. etrailer.com was a great choice! It's amazing to open a wiring harness box and have a set of printed instructions for your car included inside, the same with the hitch. Just top notch customer service all the way. Thanks for a great transaction.
by: Tommy G02/15/2015
Easy install started by measuring under the car on the pan and marked and cut with razor knife and then removed both rubber bushings that hold the Exhaust pipe ,first I sprayed them to lubed them or else you won't get off to easy then I cleaned the holes and sprayed them. I put the hitch on to a floor Jack and pushed into place under the car and jack it up tight to the holes put a bolt on each side and then the others ,torqued to 50 foot pounds which is the hardest part of the job . then put the Exhaust brackets back on. removed the jack and started on wiring removed panels and unplugged the blue plug and installed a new plug in both sockets and tested it .turn right and left signal on and check ground to green and yellow for pulse and the brown for 12 volts while head light was on . Finished, tried to upload Video but was not able .
by: Terry 08/13/2022
Solved my multiple trailer ball size issue at a great price!
by: Dale Cohen09/11/2016
We received our Honda CRV kit very quickly, took about a week to get it into the mechanic for installation. He said it went in very quickly and easily, used it for the first time yesterday and it was exceptional! Very easy to take the hitch in and out, comes with a carrying kit for the extras to store away, light kit is simple to use and hook up. My wife easily put the hitch and ball on herself! Would definitely recommend the company and product to anyone looking to add one to their SUV!
by: TeRoy H03/24/2011
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs.
Thanks ETRAILER.COM! ! !
by: Tony F.02/03/2012
the receiver was nice, very easy to install. The hitch pin is a bit simple. The trailer ball kit is a change a ball design, and one of the balls was missing the pin for it. I really don't need the smaller ball and I may change the hitch also to one with a different drop/rise. I will probalbly return this and buy something else, but because I did not get the right one.
by: Richard Burnham Jr.05/01/2011
I like this product it is very reliable and I can proudly say I got it at etrailer.com if I was a company owner I would sponsor this product I would gladly put my name on this product truly a good piece of equipment and it is easy to install and it is nice not to have to unscrew a ball hitch when ever I need a new size ball. Just a all around wonderful product and company. Thanks etrailer.com and all of your employees.
by: Brian C.09/20/2011
Very heavy duty. I used it once so far pulling a utility trailer. Works as advertised. The dual rise/drop option may come in handy as well as having the interchangeability of 2 ball sizes. Easy to use. Make sure you tighten the ball mount to proper torque and use the cotter pin(read your instructions).
by: Rick 12/12/2021
I haven’t used the trailer ball and hitch kit yet but the kit is made solidly.
by: Sam08/06/2022
Came without the pin so now I have to drive to lowes and get one
Comments
Thanks for letting us know! I will send your information to our customer service team and have them reach out to you soon.
-- 
Brooke M - 08/13/2022by: Michael D.02/25/2011
Product was shipped promptly and arrived in GREAT shape with all parts, hardware and instructions. The installation videos on the etrailer site are excellent. I had 35 minutes before dinner and was able to complete the wiring harness installation in those 35 minutes because of the video instructions ... worth a thousand words. Hitch installation went trhe same way ..... I have not yet towed my new boat (pick up in a 4 weeks) but I can tell you this is a very solid product and installation * * * * * (5 stars) Great customer support as well. oh and by the way probably saved over $400 by doing it myself versus dealer quote!
by: powersupplyguy02/23/2013
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
by: Guy C. 08/01/2015
Nice package at a fair price. The only thing I would like to see in this kit would be a receiver lock instead of the pin. If you plan to tow multiple trailers with different ball sizes this is a must, so you don't have to have different receivers.
by: Kelson B08/29/2017
The hitch, wiring kit, and equipment all arrived in a timely manner. The instructions were very easy to follow, and I was able to get it bolted on with the help of my friend in less than an hour. Wiring instructions were clear and worked just fine. Haven't towed anything to test the ground, but I'm confident it will work great.
by: Eric M.10/21/2014
Service was excellent as the product arrived quickly with no damage and all parts securely sealed and wrapped. Installation was quick and the online videos were extremely helpful. I will recommend etrailer.com to everyone I come accross for their towing needs.
by: Eric M.10/21/2014
Service was excellent as the product arrived quickly with no damage and all parts securely sealed and wrapped. Installation was quick and the online videos were extremely helpful. I will recommend etrailer.com to everyone I come across for their towing needs.
25
1280
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch Ball Mount
- How To Choose Correct Ball Mount for 2022 Genesis GV70In order to find the correct amount of rise/drop to look for in a ball mount you simply need to measure the distance from the ground to the bottom of the trailer coupler while level and then from the ground to the top inside edge of the receiver on the vehicle. The difference will be your rise/drop. I have attached our ball mount and hitch extender options below once you get the above info, just be aware that the hitch extenders reduce capacity by 50%.
view full answer... - Trailer Hitch and Wiring Harness Recommendation for 2005 Toyota SequoiaYour 2005 Toyota Sequoia can be equipped with a Class III trailer hitch receiver and we offer three options from Curt, Draw-Tite and Hidden Hitch. As all are rated equally for 500-lbs tongue weight and 5000-lbs maximum towing capacity I suggest the Curt # 13440 since it is the most popular among owners of the Sequoia. This hitch installs without drilling or welding using included hardware and provides a 2-inch receiver opening. A video is included for reference. Along with this hitch you...
view full answer... - Will a Draw-Tite Trailer Hitch Fit a 2010 Ford F-150 STX with Factory Trailer Wiring HarnessIf your 2010 Ford F-150 came with a trailer wiring harness from the factory, then the Draw-Tite Trailer Hitch, # 75691, will fit because the design of the truck was taken into account when the hitch was made. If the wiring harness was added as an after market part, depending on where it is located it may or may not interfere with hitch installation. I have included a link to the installation instructions for the hitch so you can see where it installs. If your truck came with a factory...
view full answer... - Ball Mount Compatible with Curt # 13333 Hitch on 2011 Dodge RamWe do not currently offer a package deal that includes the hitch, ball mount and ball, but we do offer a ball mount and ball kit, part # EBMK4. The kit includes a ball mount, and a Convert-A-Ball interchangeable ball system with a 1-7/8 and a 2 inch trailer ball, pin and clip and storage bag. When this kit is combined with the Curt # 13333 hitch you referenced, you'll be set with an economical towing system.
view full answer... - Determining Correct Ball Mount for Range Rover with Trailer That Has 16 Inch Ball HeightYou are exactly right. When accounting for the typical hitch ball height you are going to want a ball mount that features a 4 inch drop to tow your new Yacht Club Trailer level. You are also correct that the rear of the vehicle may drop just a tad when hooked up to the trailer but this should be small enough that it doesn't require a different drop dimension on the ball mount. With an 1,800 pound trailer you are only looking at about 180 to 270 pounds of tongue weight that will be pushing...
view full answer... - Choosing a Ball Mount for 2011 Mercedes GLK 350 With Draw Tite HitchIn order to choose the right 2-ball mount for your 2011 Mercedes GLK 350, there are two measurements you'll need to know. The first one you already have, which is the 13-1/2 inches from the ground to the top of your receiver. Next, you'll just need to measure from the ground to the bottom of your coupler. If the height of your hitch receiver is higher, you'll need a mount with that amount of drop; if your coupler's height is greater, you will need a ball mount with that amount of rise....
view full answer...
- Measuring to Find the Correct Ball Mount Rise and DropWhen you measure for a ballmount, you will want to measure from the ground up to the flat bottom part of your coupler, not inside of it. The 2-3/4 inch rise provided by the recommended ball mount would work just fine for you. That part number has been discontinued, but # EBMK4 will be a fit.
view full answer... - Why Only a 1000 lb Towing Capacity Limit on a 2005 Ford Five Hundred?The 1000 pound towing weight limit for your 2005 Ford 500, and the 2000 pound rating for your 1996 Thunderbird I was able to confirm online. Vehicle tow ratings are determined by the manufacturer, in part based on horsepower, but may also be a function of the extent to which there is access to the frame rails for mounting a hitch. If a particular vehicle design limits access to the strongest frame members, then the tow rating will be lower than it otherwise might be. However, there is...
view full answer... - Recommended Trailer Wiring Harness for 2013 Lexus RX 350It sounds like you're looking for the 4 way trailer plug for your 2013 Lexus RX 350; I recommend using the Tekonsha # 118255 because we've found that the powered converters on the Tekonsha harnesses are some of the most reliable available. This kit will tee into your tail lights and provide you with a 4 way flat to tow a trailer with and this is compatible with your 2013 RX 350 without the factory towing package. If you also need a ball mount, hitch ball and hitch pin you can get that...
view full answer... - Comparison Between Class III Receiver Hitches Available for 2020 Honda OdysseyDraw-Tite does indeed offer a Class III hitch for the 2020 Honda Odyssey. The # 76170 and is what I'd refer to as a typical hitch. Once installed, the entire hitch is just about totally concealed behind the rear bumper, with the exception of the receiver tube and the safety chain loops. Because minivans like the Odyssey have pretty minimal ground clearance at the back to begin with, Draw-Tite came up with this different design which resulted in the # 76170. With this design, the hitch...
view full answer... - Will Draw-Tite Trailer Hitches Fit Both 2006 and 2015 Honda OdysseyThe 2006 Honda Odyssey will use Draw-Tite trailer hitch # 75270 (2 Inch Hitch Opening) and is listed a fit for the 2015 Honda Odyssey, so yes, your Draw-Tite trailer hitch should fit. To complete your towing package you will want custom wiring harness # 118521, and for a ball mount and hitch ball use # EBMK4. For install details and some product demonstration videos, click the provided links.
view full answer... - Class III Trailer Hitch Fit for 1997 Ford F-150 with Flareside BedYes, the trailer hitch you referenced, Curt Class III # 13355, is indeed a confirmed fit for the 1997 Ford F-150 with flareside bed. This hitch bolts on with included hardware with no drilling required. You will need to temporarily lower your 20-inch (or smaller) spare tire for installation. If you have a larger spare then the hitch will not fit unless you relocate the spare. An installation video is linked for you. I did go to our warehouse to measure the hitch for you; its overall outside...
view full answer...
- Trailer Hitch and Trailer Wiring Recommendations for a 2005 Nissan QuestThe Draw-Tite trailer hitch # 75159 will fit a 2005 Nissan Quest. It actually fits the 2004 to 2009 Nissan Quest. I have included a link to the installation instructions for you to view. If you plan on doing some towing, I recommend the etrailer ball mount kit, # EBMK4, which comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 118469. I have included a link to the installation details and a link to a video showing a...
view full answer... - Trailer Hitch Recommendation for a 2012 Jeep Patriot Latitude EditionThe Draw-Tite trailer hitch, # 75712, fits all styles of the 2012 Jeep Patriot including Latitude models. I have included a link to the installation instructions and a link to a video that shows a typical installation for you. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, an interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 118552. I have included some links explaining the installation...
view full answer... - Is Drilling Required to Install Draw-Tite Trailer Hitch # 75120 on a 2001 Toyota SiennaIn order to install the Draw-Tite trailer hitch, # 75120, you would need to drill 2 holes, 1 on each frame rail. I have included a link to the installation instructions for you to view. Drilling the holes will not be that difficult. You will attach the hitch to the 4 (2 on each side) holes that are already there. Then you will use the hitch as a template and drill the holes for the remaining two attachment points. Using a special high quality drill bit like the 1/2 inch rotabroach bit...
view full answer... - Curt Class III Trailer Hitch Compatibility With a 2007 Ford FreestyleThe Curt Class III Trailer Hitch, # 13542, will fit on your 2007 Ford Freestyle. You may be interested in a few other items if you plan on doing any towing with this hitch. I would recommend you also get the T-One Wiring Harness, # 118395, and the Ball Mount Kit, # EBMK4. This kit comes with a ball mount, 1-7/8 inch and a 2 inch hitch ball and a pin and clip. The wiring harness will plug directly into the tail light assembly on your vehicle. I have included a link to the installation...
view full answer... - Trailer Hitch and Wiring for a 2015 Acura RDXNo, the 2004 Acura MDX and 2015 Acura RDX require different trailer hitches. For the 2015 Acura RDX you can use Draw-tite trailer hitch # 75784. I have included a link to a video showing installation of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and storage bag. If the ball mount kit does not have the right rise or drop...
view full answer... - Tools Needed to Install Draw-Tite Trailer Hitch 75038 on a 1988 Ford F-150The Draw-Tite trailer hitch # 75038 does fit a 1988 Ford F-150 with a standard or step bumper. I have included a link to a video to the right showing a typical installation. The installation instructions, which I have also linked to the right, state you need a drill, 1/2 inch drill bit, 3/4 inch wrench, 7/8 inch wrench, and a torque wrench up to at least 95 foot pounds. Any tools listed that you do not have can usually be borrowed from an auto parts store. If you plan on doing some towing...
view full answer... - Are Trailer Hitches Visible Under the Rear Bumper of a 2014 Honda CR-VDraw-Tite is just the brand name and does not necessarily describe the appearance of the hitch on the vehicle. In this case, hitch # 75742 will have the cross tube visible beneath the rear fascia on the 2014 Honda CR-V. I have included a link to a video showing a typical installation to give you an idea of what it will look like installed. All of the trailer hitches for the 2014 CR-V will fit the same way. The other thing to look at is the vehicle owners manual for the towing capacity...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring Harness for a 2014 Honda OdysseyYes, the Draw-Tite trailer hitch # 75270 will fit your 2014 Honda Odyssey. It actually fits 1999 to 2014 Odyssey model years. I have included a link to a video showing the hitch being installed on a 2014 Odyssey for you as well as a link to the instructions. If you plan on doing some towing I also reocmmend etrailer ball mount kit # EBMK4. It comes with a ball mount mount, interchangeable ball set, hitch pin with clip, and a storage bag. For trailer wiring you can use harness # 118521....
view full answer... - Hitch Recommendation for a 1964 Chevy C10 Panel TruckThe Draw-Tite Hitch part # 41001 that you referenced is confirmed to fit your 1964 Chevy C10 Panel Truck as long as it has an 8 foot bed with a standard bumper. If you have a different bed length or bumper style check out the link I attached as there are several hitch options available based on the different styles of trucks. For trailer wiring you would want the Draw-Tite Wiring Harness # 18252. For ball mounts and balls you might also be interested in the etrailer.com Ball Mounk Kit...
view full answer... - Will Draw-Tite Trailer Hitch 75712 Fit a 2014 Jeep Patriot LatitudeDraw-Tite trailer hitch # 75712 fits all models of the 2014 Jeep Patriot. Installation will be similar to the vehicle I have linked showing installation on a 2011 model. I have also linked the instructions for you to view. All of the available hitches for your 2014 Patriot install in similar ways. The Draw-Tite hitch has an estimated install time of 30 minutes whereas the Curt hitches are estimated at 40 minutes. Not a huge difference but every little bit counts. If you plan on doing some...
view full answer... - Installation of Curt Trailer Hitch on a 2005 Honda CR-V with Wires Blocking a Mounting HoleAnything that is in the way of the hitch mounting side brackets and/or the hardware to mount the hitch would have to be moved out of the way. You would have to pull the wiring harness you see back towards the front of the vehicle and out of that hole using something like fish tape or a straightened wire hanger. Then re-route it so that it is not in the way. I have linked a video showing an installation of Curt hitch # 13535 on a 2006 CR-V and the process will be the same, minus the wires...
view full answer... - Trailer Hitch and Wiring for a 1965 Chevy C/K Series Pickup Short BedI checked with Curt and they do list trailer hitch # 13028 as a fit for all models of the 1965 Chevy C/K series pickups as long as they do not have the 10 inch deep drop bumper. I have included a link to the installation instructions for you. To complete the towing set up I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage bag. For trailer wiring you can use # 18252 which just hardwires into the tail...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-245-6134
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.