bing tracking image
  1. Trailer Hitch Ball
  2. B and W
  3. Gooseneck Hitch Ball
  4. 2 Inch Diameter Ball
  5. Turnover Ball
  6. 30000 lbs GTW
Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch - 2"

Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch - 2"

Item # BWGNXA2010
lowest price pledge
Retail:$111.25
Our Price: $91.86
You Save: 17%
Trailer Hitch Ball
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
BWGNXA2010 - 30000 lbs GTW B and W Trailer Hitch Ball
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Adapt your B&W Turnoverball gooseneck hitch by replacing the standard 2-5/16" ball with this durable steel 2" diameter ball. Lowest Prices for the best trailer hitch ball from B and W. Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch - 2" part number BWGNXA2010 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2181)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

B and W Trailer Hitch Ball - BWGNXA2010

  • Gooseneck Hitch Ball
  • 2 Inch Diameter Ball
  • Turnover Ball
  • 30000 lbs GTW
  • Zinc-Plated Steel
  • B and W

Adapt your B&W Turnoverball gooseneck hitch by replacing the standard 2-5/16" ball with this durable steel 2" diameter ball.


Features:

  • Hitch ball is designed for use with B&W Turnoverball gooseneck hitches
  • Square ball base prevents ball from turning in hitch during hookup
  • Sturdy steel construction
  • Made in the USA


Specs:

  • Diameter: 2"
  • Distance from center of locking pin hole to bottom of square base: 2"
  • Capacity: 30,000 lbs


GNXA2010 B and W Turn Over Ball 2" Gooseneck Trailer Hitch Ball




California residents: click here


Video of Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for B and W Turnoverball Gooseneck Trailer Hitch Ball Review

Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the BMW turnover ball gooseneck 2 inch trailer hitch ball. Standard with most gooseneck hitches is going to be a 2 5/16 ball, which is going to be great for a lot of applications, but sometimes your application requires something different and that's where this two inch ball is going to come into place. And having the ability to swap very quickly and easily to your application is a nice benefit. This 2 inch bolt is going to have all the same features as your 2 5/16.

So it's still going to have that 30,000 pound trailer weight rating. It's still a turnover. So you can actually flip this over when not use, it's going to store nice and flush in your bed, leaving you with plenty of space. So this is going to be almost identical to the 2 5/16 with that steel construction. So it's nice and solid and it'll hold up.

And also with holding up, it has a zinc coating, which is going to protect it from rust and corrosion. So as you can see, this ball has actually been in use for a couple of years and withstood the test of time, and a little bit of cleaning to bring it back to life and look brand new again. BMW also offers a 3 inch option. So between these three, that's going to offer a lot of different variety to be able to hook up to your trailer needs. So, if you have a camper like this, or if you need to tow your horses around, whatever your needs may be, we have a ball size for you.

And it's going to be as simple as dropping that in. And that was a look at the BMW turnover, gooseneck 2 inch trailer hitch ball. Thanks for watching..


Customer Reviews

Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch - 2" - BWGNXA2010

Average Customer Rating:  4.8 out of 5 stars   (2181 Customer Reviews)

Adapt your B&W Turnoverball gooseneck hitch by replacing the standard 2-5/16" ball with this durable steel 2" diameter ball.

by:

Great customer service
Fast shipping.

Thanks




by:




by:




by:




by:

Review from a similar Turnoverball in Trailer Hitch Ball


This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.


Comments
Great product still love it works great with my Ram Boxes. No issues ever
Leonard - 01/24/2022


by:

Review from a similar Turnoverball in Trailer Hitch Ball


The high quality is apparent with this hitch. It is made well and thoroughly thought out for easiest possible install. The value is very high!

However the instructions were incorrect for the distance to drill the hole in the bed. It said 45 1/2” from end of bed. But It should have been 45 7/8” - 46”. Caused a slight issue for our install. I had to ream out the hole on the cab side to get it to fit. Which left a large 1/4” gap on the side closest to the rear of the bed. Most of these new truck have a circle area cast in them where the hidden hitch hole should go. I recommend centering your drill bit in that and drilling instead of using the measurements in the instructions. I considered doing that, but depended on the instructions instead. Bad choice! Not pleased with that! Further, the instructions don’t give torque specs.


Comments
I have contacted one of our installers and have confirmed that when it comes to the measurements, they recommend following the measurements that are on the installation instructions. The factory dimple is not always centered, so its better to measure according to the instruction manual. As for the torquing specifications, on page 4 of the instructions it states that once the hitch is tight, torque 0.625 inch hardware to 150 ft. lbs. and all 0.5 inch hardware to 110 ft. lbs.
-- Etrailer Expert Katrina B - 07/08/2022


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Received in terrible condition. One box was completely open at all borders and finish on hitch was chipped in multiple places. Product was shown as in stock when order was placed but wasn't shipped until the day AFTER it was supposed to be delivered. Two calls to etrailer told me it would be shipped prior to that date but obviously just trying to smooth over the situation. Installation was completed per instructions and watching etrailer [online] videos without issue. Only difficulty is torquing the bolts to final specs in tight spaces.


Comments
I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 04/21/2022


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Installation was straight forward and it's well built. Works smoothly. etrailer was awesome as usual with shipping and service.
However.... ;) on the BWGNRK1400 for '73-'87 GM trucks, the predrilled holes in the hitch for the safety chain u-bolts are 6-1/4" each way from center of the ball. This places the matching holes you have to drill in the truck bed on the sloped edge of the ribs, not in the center of the valley as intended. The instructions read as if the holes are not pre-drilled but they are, so I contacted B&W and asked if I can drill new holes at 8-3/4" each way of the ball so that they center in the next valley and they said no, that will void the warranty. So I had to do some bodywork, cut, weld and grind to scallop the ribs around the anchors to they won't always be sticking up (defeating the flat floor intent of this hitch design). I saw guy on [online] noted this was an issue on his squarebody bed as well.
B&W needs to look at this dimension for future installations to help out the next guy.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


This turnover ball was a perfect match. Thank You !


Comments
Its still doing great !
Frank V - 06/16/2022


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Overall this Installation went as I anticipated, 4-5 hours; it's not for an unprepared amateur. I strongly recommend watching the Installation Video, but more importantly, disconnecting the wiring harness (from both sides, there's 3 connectors) that cross over the rear cross member above the Differential. Disconnecting the rear exhaust was a MUST DO for us (my son helped me) as is a second person. Patience was our friend during this entire Installation for both of us. The brake line that crosses over to the passenger side was of concern to me, and got in the way as well; in the end it is below this entire installation. However there is a Mount Block on the driverside that creates a problemwith getting one bolt into place; a "Fishing Spring" (spring wire that wraps around the threads with long tail to fish/thread/pull thru the hole) would have helped to get this into place. (SEE PICTURE) Once in place the head is able to be held with a narrow spanked wrench while tightening. The rear center bolt is a HUGE challenge to reach once everything is in place and you're torquing things to spec.I had to purchase a "3/4" Crowsfoot" to get this and some of the others because of things blocking access with a socket (not talked about in the video or Installation Video). Once everything is in place and Reconnecting electrical plugs we found that there was enough gap/spacebehind the Kit Rear Cross Bar, over the vehicle rear cross member, to run the driver side electrical. Pay attention to have the "male" plug facing inboard to give you enough slack to reach the passenger side plug. A couple of zip-ties were needed to keep this inplace. See picture for how I routed this and the vent tube to avoid the heatshield.

I've got a 26 foot Keystone Cougar 5th wheel RV Trailer that I be using this, along with an Andersen 3217 hitch. With this B&W Hitch I don't have the 5th wheel Rails across the bed full-time anymore of my 2022 Ram 1500DT 4x4.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


1997 ford f250
Works great, except the
turnover part, the ball hits the sway bar. Install was not as easy as stated but that's probably because the kit was more of a universal fit for my truck and I had to do a lot of drilling.


Comments
I still have no complaints about the work ethics of this setup.
James - 02/13/2022


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Worked out … Perfect upgrade to the factory system. I hated having to remove , and place the covers in the bed. Now that the safety chains are closer to the center I can load boards and stuff that I don’t want in the trailer in the bed without having to rearrange everything. Only thing is the safety chain hoops are little thicker than the bed ribs and stick up. So it’s not totally flat..




by:

Review from a similar Turnoverball in Trailer Hitch Ball


This definitely is not a plug and play mechanism.
There is interference with the lever to unlock the ball and it hitting one of the bolts. I had to shave the bolt down to make it even slide by, in addition to this I had to cut about 1/4” off the mechanism lever for it to open all the way and not hit the bracket on the truck.

So in summary I had to make two cuts into the product to make it even function properly.
Poor quality control.


Comments
I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 12/27/2021


by:

Review from a similar Turnoverball in Trailer Hitch Ball


This is a good kit. It took me about 3 hours to install, but I'm not the fastest.
You'll need a floor jack, rope, 4" hole saw, 1/2" and smaller drill bits, drill, torque wrench, sockets, wrenches, and a impact driver would help make the job faster. Use the floor jack in the truck bed with a rope to lift the heavy plate into place. See pictures.


Comments
1 year later of towing heavy equipment trailers and no problems at all! Still going strong.
Kevin - 10/22/2021


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Great product. Direct fit so no need for modifications . The powder coated paint was in excellent condition. etrailer is an outstanding company. They keep you updated with your orders on a timely manner and the item was shipped and received within a few days before the delivery date. I will always continue to order any truck products from etrailer.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


The installation videos are pretty accurate all around. Admittedly, this took me a little longer than the projected time frame, which I anticipated. Removing the driver side wheel well insert also made torquing the bolts there easier. Installation would likely be easier with a buddy, and reaching the torque specifications on several bolts was difficult with a standard 1/2 inch drive torque wrench, but it was all possible and fit 100% perfectly. Excellent conversion for my 3500 8foot bed. Next step is to get the matching fifth wheel hitch and purchase our dream RV.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Great sturdy product. My used 2012 F-250 came with one and now have one on my 2020 F-250, I think it's a better product than the Ford factor hitch. The installation video is VERY helpful.
Torquing the bolts requires a lot strength and flexibility due to the awkward positions you have to get in but it can be done with patience and prayer. Just plan on dropping the exhaust as shown in the video. As is consistently the case e-Trailer's customer service is second to none. We've already used it several times to pull at 16' gooseneck dump trailer and it works very well.


Comments
Great hitch, Ive purchased a second gooseneck trailer and have confidence when towing with this hitch.
Kale - 03/31/2021


by:

Review from a similar Turnoverball in Trailer Hitch Ball


Excellent customer service and The best gooseneck hitch you can buy!!!




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Works excellent I mounted it to a 3/8 plate
and it fits under the dump body
and it pulls the 30ft goose neck with 17,000 load no problem




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Excellent quality, Easy to install, Good Instructions. Online Video also very helpful. 2016 Ram 2500 Long Horn. Took about 3 hours




by:

Review from a similar Turnoverball in Trailer Hitch Ball


I put B&W turnoverball on a 2016 Ram 2500 crew cab short bed diesel,it has the factory prep puck. The change over was pretty simple. I used the same studs and nuts that came with puck goose ball. Tbe only hard part was trying to pry the 4" exhaust pipe down to slide the B&W plate into position. It took me about 2 hours to install by myself. I am going to use a 4" offset ball so I can use a reese goosebox hitch for my 5th wheel.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Very heavy duty goose ball. Love that the bed is mostly free of obstructions when not using the hitch.
Install took 2.5 hours for two of us and we did have access to a hydraulic lift. I couldn’t imagine trying this install alone or without the lift mostly because of how heavy this hitch is and the bolts/nuts you need to be able to reach and torque down. The worst part was drilling a 4” hole in the bed of a new truck, very nerve racking! I also like that this is custom fit for my truck and there were no hes that needed to be drilled in the frame, everything lined up perfectly.
The etrailer install video was key, very informative and so much better than the instructions that came with the hitch. Delivery of the hitch was fast, only 4 days after ordered.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


Super easy installation with basic tools and know how. Hitch works flawlessly, wouldn't ever want anything other than a B&W. Ease of use and installation is well worth the money, plus after the fact we were able to add the 5th wheel companion which drops right in to the goose hitch. Sweet setup for both.




by:

Review from a similar Turnoverball in Trailer Hitch Ball


I used this exact hitch on my truck 4 years ago. I just bought a second truck and the first hitch was so good I bought another one for this truck. Good and strong product works great.


Comments
Still great no issues
Jason h - 07/26/2022

25
2185
Show More Reviews

See what our Experts say about this B and W Trailer Hitch Ball

Do you have a question about this Trailer Hitch Ball?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Bradley B
Installed by:
Bradley B
Employee Dustin K
Video Edited:
Dustin K
Employee Kristina F
Updated by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.