Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Raw, heat-treated hitch ball from B&W has a 1-1/2" diameter x 2-3/4" long shank with 12 threads per inch. Built-in rise lets you match ball to your trailer's height. Designed for heavy-duty towing.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to take a look at the BMW 2-5/16" Hitch Ball with the 1" rise, the long shank, has a raw finish and has a 30,000 lb weight capacity. This Hitch Ball will provide a nice connection point for your trailer's coupler, has the built in rise here that will let you easily match the ball to your trailer height. Basically this ball will sit about an extra inch above the ball mount platform when it is installed. The shank itself uses about 12 threads per inch on the shank. This will provide a nice, tight strong grip when it is installed. This is a heat-treated steel which is very durable, has a nice raw finish to it. The lock washer and the nut are all included. This part is made in the USA.
A few specs on this; the ball diameter is 2-5/16 and that is actually even stamped on the top of the ball. The weight is stamped up here, it has a weight capacity of 30,000 lbs. The rise portion we mentioned is going to be 1 inch and then the shank dimensions, the total length of the shank is going to be right at 2-3/4 inches long and the diameter on it is going to be right at 1-1/2 inches. When you go to install this, you'll just drop the shank portion through the hole on the ball mount, put your lock washer on, take your large nut right and tighten that down and just use the torque specs that are recommended for that application. That should do it for the review of the BMW 2-5/16 Hitch Ball with the 1" rise, a long shank and a raw finish and a 30,000 lb weight capacity.
Average Customer Rating: 4.8 out of 5 stars (456 Customer Reviews)
Raw, heat-treated hitch ball from B&W has a 1-1/2" diameter x 2-3/4" long shank with 12 threads per inch. Built-in rise lets you match ball to your trailer's height. Designed for heavy-duty towing.
Has been a great hitch for the custom gooseneck plate I made for my semi toy hauler set up. Highly recommend to anyone needing something like this. The 1” raise was a huge help with clearance between my plate and the hitch when going big dips and transitions.
s a full tim RVer, I've had the hitch now for about 14 months and have to say with the exception of it not coming apart on me, I'm pretty disappointed with the condition. Ive got about 10k plus miles on it. See attached photos. Its very noisy. It likes to slam forward and aft. They put pucks on the side to side but not forward to aft. The paint almost immediately started to flake with in one month of use and continued to..to-date. The bolt holding the yoke preventing forward and aft movement sherred with only 80 inch lbs of torque...twice. the factory and the replacement they sent me. Finally I had to upgrade the bolt to a harder bolt to alow me to get to the required torque of 100 inch pounds. The bolt has to be torqued every trip. Long trips...every day. The design distributes the load on the flat bed and bends bends the bed. Unfortunately, there is not much out there to choose from so its give and take. Its done the job but would like to see it hold up better and see some design changes. I just ordered a new base today so we will see how it does.
Arrived early . Sales team was very hel pful.
Fit my old truck perfectly.
I received exactly what I was supposed to in the time frame that was givin. I will use this company in the future for my trailer hitch needs.
great will buy more
The only place I could find the right size shank, and fast shipping! Plan on pulling heavy equipment and the ball i ordered is rated for 30k lbs. Thats the best one i found. Highly recommend this company
Used this hitch ball for a custom gooseneck hitch I made for a semi, the original was to short so in external articulation I would scrap the gooseneck and hitch. Buy this ball with the 1” lift in it really helped and I can’t get the hitch to hit anymore! Working great
The B&W 30,000 pound ball is an excellent no-frills option. It's extremely durable. We prefer to use the nut AND weld the base to the mounting plate. Reliability and durability are important for our needs. We have a few one ton trucks and several trailers. This ball exceeds the weight rating of every piece of equipment. It's a great option for our needs. Please remember to chock your trailer.
We have this ball mounted into our Tractor's Draw Bar for maneuvering our livestock trailer in the winter months. Solid and reliable.
Ball is excellent !!! Well built , and had the tow rating I was after with 1 1/2 shank and with the rise I needed to get up a little higher out of my bed! I made my own hitch and this ball was exactly what I was after . If you need a threaded shank this ball works great for gooseneck hitch ! I also went with basic shipping and it took 3 days to my door !! etrailer did a great job sending me email updates and prompt processing. I do reccomend using them !
It is exactly what I need hitch was welded in. If I could not get this would have to pull bed off to remove
Product was good shipping was shit almost 3 weeks late get better
Quality heavy duty ball
This ball is made by BW, good quality. The recommended torque is over 500lbs. Not sure how I am supposed to do that
Looked everywhere for a certain size ball for a gooseneck, even on Amazon. Found it here. Good prices and speedy delivery.
I had trouble finding this part but etrailer had exactly what I needed! And it was delivered in just a few days! Great service guys!
Excellent quality, made in USA. This item was hard to find in our area, your catalog solved that problem.
Jonathan
6/9/2024
Working great for a year now. No problems at all! Used at least twice a week on Ford F550.
Great feed back from seller and very responsive. Ball was exactly what I ordered
Excellent company to deal with. Everything was as ordered and timely shipping. Will buy from again. Thank you!
Very good
Was exactly as stated. Quick delivery. Would use again no question
Ball worked perfectly!
Could not find size of what I needed anywhere local. Ordered online and quick delivery.
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/28/2023
It is a daunting task to torque it to 500 ft pds. You most likely do not have a torque wrench rated up to 500 foot pounds on hand. When tightening the ball you want to make sure you get the lock washer so that it is completely flat. One way to help you do this is to put the ball mount in your hitch receiver sideways so the hole is vertical. Then install the ball that way. So you can use something to hold the ball with one hand and torque the nut with the other. Another way is to hold the ball in a vice, if you have one. You can wrap a thick rag around the ball so whatever you are holding it with does not damage it.